Availability information at CRM using ECC with APO?

Dear Colleagues:
We are using availability information in CRM at ECC. Now we have a requirement to start using for some plant availability at SCM-GATP (APO).
We should do availability information at ECC and if the plant is using SCM do the availability information at SCM and if not, do it at ECC.
Does someone no if this is possible?
Cecilia

HI
Mania you can do this availability info up load from CRM to Apo SCM but you need to transport the Availability info from CRM to Apo or SCM with the help of basis ask u r basis to move availability info from crm to Apo or scm, while you can directly Delta Up load from CRM to ECC R3 Ac4 and You can make use the Availability info and you can read this at ECC.
Reward with Points
Venkat

Similar Messages

  • Availability Check from CRM using ECC / Assembly Order

    Hi,
    we're using an ATP Check from ECC to CRM 5.0. As described in the SAP Notes, assembly orders are not supported in this ATP scenario.
    Does anybody have experience to overcome this (without implementing APO or creating the orders directly in ECC)? Any enhancements / work arounds?
    Thanks
    Anke

    Hello Anke,
    you cannot have both, ATP check in CRM during order change/creation and in ERP when the order gets replicated to ERP-SD.
    But when there is no ATP check used in the CRM at all (for the current item category), and the order gets saved in CRM and replicated to ERP, during this replication and order creation in the ERP-SD the regular ATP check in the SD order can run as usual, of course.
    This means the scenario can be setup without ATP check in the CRM, but having assembly as usual in ERP-SD. Only the immediate information about the confirmed dates/quantities from the assembly order would be missing in the CRM order. 
    regards,
    Thomas

  • Can BPS be used along with APO..?

    Hi,
    We are examining the possibility of using BW-BPS within APO environment as much of the forecast planning is carried out with APO data. Since BW3.5, SAP has bundled BPS into BW. Since APO has BW3.5, why not BPS could be used within APO. Any thoughts..?
    What are downfall of using BPS within APO or I put the question in another way, What is the difference between BW-BPS as a standalone system and BPS in APO system.
    Any input will be helpful.
    Thanks and Regards,
    KT

    Hi KT,
    there is a paper avaliable on service marketplace, that describes how BW-BPS can be integrated with APO-DP:
    <http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000517885&> (or http://service.sap.de/bi -> SAP BW Business Planning and Simulation -> Further Information) title "Integrate BW-BPS and APO-DP".
    Regards,
    Tobias

  • How to get Search and offline Availability properties in SharePoint using powershell with CSOM

    Hi,
    I want to get the information about the SharePoint sites being crawled or not. I tried to get "Search and offline Availability in SharePoint" settings properties but I couldn't get those properties.
    I followed below thread with no luck : http://www.c-sharpcorner.com/uploadfile/anavijai/search-and-offline-availability-in-sharepoint-2010/
    I couldn't find $web.AllowAutomaticASPXPageIndexing property at site level but i can see $list.NoCrawl
    at list level.
    Can any body help me out to get those values?
    Any help would be greatly appreciated.
    Thank you.
    AA.

    Hi,
    Since AllowAutomaticASPXPageIndexing is a member in SPWeb members while not in Web members, we can not use Client Side Object Model with it. If you need to use it in client side, you need to create a web service for it.
    https://msdn.microsoft.com/EN-US/library/microsoft.sharepoint.client.web_members.aspx
    https://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spweb_members.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Planning with APO

    Hi Everyone,
    I have a question regarding APO and BI Integrated Planning. If we are using APO DP is it a good option to implement BI Integrated planning as well. because both of them have the same planning and forecasting strategies. Is BI Integrated Planning and alternate option for APO DP or can it be used along with APO DP for planning on certain reports. Thank you very much for your time.
    Edited by: akshay27 on Oct 14, 2009 8:30 PM
    Edited by: akshay27 on Oct 14, 2009 8:39 PM

    Hi Akshay27,
    I have personnally never use the BI integrating planning, but based on my knowledges; hopefully somebody with more experience in this area will be able to complete this answer!
    Integrated planning indeed allow to realised more and more planning using BW infrastructure. The very big advantages is the user friendliness.
    However this does not exclude the use a DP. Both can be use together, for example DP for your power user and integrated planning for collaboration. DP will be the "master system" enabling you to maintain CVC, run complex statistical forecast, validate foecast.
    (I have seen a simialr implementation a couple of year ago using BPS).
    Note for exaple that the new functionality "customer forecast management" in SCM 7 use both DP and IP.
    You mentioned the possibilty to perform statistical calculation in IP... I haven't actually seen that, but I am not convince you will have the capacity of DP (seasonal planning, promotion, like profile... MLR, POS forecast...), If you know more, please let me know.
    I hope this help a bit; now if somebody could provide more information about IP, that would be great!
    Thanks and Regards
    Julien

  • Changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)

    Hello
    Maybe not the best section ..
    But we have in mind changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)..
    I wander what would be pro and what cons?
    Thank you a lot
    Jan

    Hi Jan,
    If I understand correctly you are going to perform database migration activity in your present landscape. Firstly you have to contact SAP as well as one of the third party hardware vendor (who is going to provide certified HANA hardware). SAP will provide you all the license details.
    For whole your migration activity below link will be helpful:-
    SAP BW on HANA Cookbook
    Migration to HANA made easy with DMO
    Regards,
    Rafikul

  • If client uses all the APO modules along with ECC then what is the CIF role in DP

    Hi All,
      As per my knowledge if the client is using only SAP ECC and DP then CIF does not play any role but what about if client uses all the APO modules along with ECC then what is the CIF role in DP ?
    Thanks in advance ..

    Hi Vinod,
      i am aware all the above details what u mentioned.
    Generally  i am extracting the historical data from Excel to BI in DP- @ my project.
    But if the data is in SAP ECC then do we need to use CIF to extract the data to BI in DP... so what is the role of CIF in DP if client uses only DP module? and if the client uses all the APO modules then what is the role of CIF in DP especially ?....awaiting for ur response....
    Thanks.

  • CRM integration possibility with gATP through ECC

    Hey Gurus,
    We would like to setup the integration between CRM (731), ECC (606) and gATP.
    But I will NOT setup gATP integration directly with CRM. But rather CRM sales order replicated in ECC, ECC should perform the ATP check by calling gATP. Afterwards the ECC sales order replicates back to CRM. Then CRM get the ATP result from gATP indirectly.
    And it should not requires performing ATP check manually in VA02 after CRM order replicates to ECC.
    Has anyone experience such indirect integration between CRM and APO/gATP?
    Thanks,
    Br,
    Ying

    Hi Bala,
    Thanks for the input.
    While we have the RFC and Logical setup between ECC<->SCM.
    And data exchange between CRM and ECC has also been established.
    Currently we can run ECC-APO gATP integration.
    The thing is we want to integrate CRM into this gATP check through ECC.
    As you mentioed: RFC and connections between ECC - APO- CRM, do you mean besides ECC <-> SCM/APO connection, we should also setup the RFC and logical system connection in bi-direction between CRM <-> SCM/APO?
    From CRM side, there is one customization about ATP check - "ATP Profile", it can be set as "ECC ATP check" or "No ATP check". (we do not want to use "APO ATP check" profile in CRM).
    Based on your experience, which one of the scenario/ATP check possibility would work out for the delayed ATP check scenario?
    Looking forward to your further input.
    Thanks,
    Best regards,
    Ying

  • CRM -- PI-- ECC using bdocs

    Hi,
    I wanted to know the solutions how we can have to intregate CRM Site details using "bdocs" with PI using XIF in CRM and send to ECC Server like CRM >PI>ECC.
    Anyone who has done such a scenario kindly share some pointers on the same.Also can we use the FM CRM_UPLOAD_TRIGGER and BAPI_CRM_SAVE For such a case?
    Regards,
    Anirban

    Dear Anirban,
    I came accross similar issue with Business Partners in CRM.
    where business Parner information in CRM should be sent to PI and then diverted to B1 server.
    For CRM system to generate IDocs we need to provide necessary details in TCode: SMOAC
    we don't need to take care of XIF during configuration.
    If your systems are not fonfigured for IDoc processing, then just configure them like other servers and execute the BAPI that produces BDocs.
    automatically IDoc will be generated b'coz of the setting what u made in TCODE : SMOAC in CRM
    Best regards
    Praveen

  • CRM -- PI-- ECC using XIF and bdocs

    Hi,
    I wanted to know the solutions we can have to intrgate CRM Site details using bdocs with PI using XIF in CRM and send to ECC Server like CRM >PI>ECC.
    Anyone who has done such a scenario kindly show some pointers on the same.
    Regards,
    Anirban

    Anirban,
    Seriously unless you are doing multiple backends or something strange, you don't even need PI for a CRM to ECC scenario.  The CRM middleware does not use PI at all and basically it is standard configuration on the CRM side to send over the information.
    Another question is why would you want to send the plant master from CRM back to ERP?  Honestly the plant master should probably always be maintained in ERP.  This scenario does not make sense from both a business and technical perspective.
    Take care,
    Stephen

  • I cant print and get this message, "adobe elements, "the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing."

    I keep getting this message when trying to print in adobe elements, I am using a new Epson WF-3640 printer
    "the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing.

    Hi,
    If you are working in PSE13, please update it to latest PSE13.1 update available and see if it helps.
    To apply update, you can go to Help > Updates and there you can see PSE13.1 update.
    Thanks,
    Anwesha

  • Unable to access ECC transactions from CRM using Transaction Launcher

    Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
    1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
    2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
    3)     Is there any other issue and need development specifically related BOR TSTC?
    Warm regards and thanks in advance for your time.
    Prasad

    Hello JC,
    Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
    Transaction Launcher
    Regards,
    Ashik

  • What are the steps for using Bobj with ECC

    Hi,
    I have the ECC 6 with EHP4 system, now i want to use BusinessObjects for reporting purpose. I dont have the BI installed, What are the pre-requisit for installaing and using Bobj with web intelegence and crystal report. Dose BI is must for bobj to work? Please explain in steps what are the things i have to do.
    Thanks
    Rajib Imran

    It looks like you are new to BOBJ. BI is the service name and BOBJ is the product name in SAP.
    Since you have not mentioned your version of BOBJ, I assume you are in the latest version...
    To date, there is no direct connectivity available between ECC and BI 4.0 (current release of BOBJ).
    You may need to use one of some of the following ways:
    1. Using Plug and play Rapid marts (using Data Services)
    2. Build your own custom marts (using Data Services)
    3. Building SAP BW and using SAP integration kit
    Having said, there is a plan for direct connectivity between SAP ECC and BI 4.0 in the upcoming enhancement to BI 4.0.
    Please refer the link below for more details:
    /people/tammy.powlas3/blog/2011/12/04/sap-integration-with-businessobjects-bi-40-feature-pack-3-asug-webcast-summary
    Hope this sets up your thought process
    --Vino

  • Can we download employee data from ECC to CRM using standard middleware?

    HI,
    Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
    Thanks,
    Regards,
    PV

    Standard replication for employee to CRM is using ALE.
    BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
    However send this information using ALE is not difficult. Why don't you wan to use ALE?
    Regards,
    Lyda

  • I am unable to open encrypted emails using webmail and a CAC reader.  It says "content can't be displayed because the S/MIME control isn't available."  I'm using a Macbook Pro with 10.10 OS and have tried both Safari and Chrome.

    I am using a Macbook Pro with OS X Yosemite 10.10.2.  I am unable to open encrypted emails using webmail.  I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader.  When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available." 

    I am using a Macbook Pro with OS X Yosemite 10.10.2.  I am unable to open encrypted emails using webmail.  I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader.  When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available." 

Maybe you are looking for