Availability Monitoring from Solman

Dear community,
we are using availability monitoring with CCMSPing from our Solution Manager as central monitoring system. We tried to configure a central autoreaction method that send automatically emails if a syste is down. That works for all other configured MTE-classes but not for the availability classes.
What could be the issue with that?

Hello Christoph,
> availability monitoring with CCMSPing from our Solution Manager as central monitoring system.
> We tried to configure a central autoreaction method
the information regarding the availability is stored locally in your central monitoring system therefore a central autoreaction will not work here (because there is no agent that will trigger this).
As a consequence you have to configure an additional autoreaction that is started in dialog. Please note that the local autoreaction will be started in client 000 so you need also to configure SAPconnect in this client.
Regards, Michael

Similar Messages

BI Process chain monitoring from SOLMAN

Hi,
We have configured CEN in our landscape and successfuly managed to get data from satellite systems and getting alerts according to our requirement.
But for BI Process chain Monitor we are getting alerts of yellow MTE with text "Entire chain now has status 'A'", which is flooding our mailbox. We cant find any way to stop this and to receive mails only for failed process chains i.e. for red MTE.
Can you please help us in this?
Thank you,
Lena

Hello Marco,
the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
Sorry for any inconvenience caused.
If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
Best Regards
Volker

Business Object system monitoring from SOLMAN

Hi,
We have recently installed SAP Business Objcts in a seprate system and now we want to include this system in SOLMAN for early watch alerts.
can any one provide the document/setps on how to include our Business Object system in SOLMAN.
Thanks * Regards,
KVR.

Kasi
I could not find any BO specific talks about SolMan and EWA in particular
Did you already tried to add the system like a regular NW based system via SMSY? I guess you can use the regular procedure here
Nesimi

I have a dvr and I want to monitor from my phone. this worked when I had a Belkin router that let me open ports. I use "canyouseeme" and it can't see 80, 9000 or 1025. How do I make them available?

I have a Lorex DVR that I want to monitor from my IPhone and IPad. I used to be able to do this when I had a Belkin router (easy to open ports) but I bought the AirPort Extreme router and no longer have that capability. When I use "canyouseeme" they can NOT see 80, 9000 or 1025. Lorex says I need them all available in order to access. Help! And all the help I see refers to a earlier version of the AirPort Utility so I cant use those to look at anything, I cant find the same screens, I have version 6.1 (610.31). I also don't really understand how ports work, so I need a pretty basic explanation.

Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.

Availability monitoring using ccmsping - refresh rate

So I've configured my solman 3.2 to monitor the availability of other systems via the use of ccmsping. I can see the other systems well enough, but the problem is the long time it takes for my solman system to become aware that a monitored system is no longer active.
It can easily take 20 minutes for it to report that a system is unavailable. When I say "report", I mean that the status is updated in the 'Availability and Performance Overview' monitor in RZ20.
Even then, the only evidence visible is that the 'Availability' alert changes colour due to the % availability over the last 15 minutes. The other alerts for Groups and Instances simply turn white because no information is coming from the child system.
SAP help and the document "Availability Monitoring with CCMSPING.pdf" advice that monitoring frequency can be changed by changing the parameter values for the CCMS_AVAIL_LOGON_CHECK method. I have changed these values, which have had no apparent impact on the response times for noticing that a system has become unavailable.
Any suggestions?

Hai Dirk,
I have checked all the ways possible, we have sapms<SID> in the IP service name filed.
Tried with 36<Instance number>, aslo tried with IP address in the host name filed but no luck.
We have 4 PRD systems out of which 2 works and the other 2 is not working. The working systems are 640 systems and the other two systems which is not working are 620 systems.
I have tried updating CCMSPING to the latest patch level as well.
The services file in the CEN system is maintained with correct values.
We have SAPROUTER running in our CEN system, and the entries can be found in my previous post.
We are not using the router to connect because the systems which are working do not have any router string attached to them.
Please let me know if you find any reason for the problem.
Thanks in advance.
Regards,
Yoganand.V

Error when trying to extract data from Solman to BI 7

Hi,
We are trying to extract data from Solman 7 to BI 7. The following extractors have been activated on Solman since we want to be able to report CCMS ALERTS and System availability on Bi Portal.
Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
transaction: RSA5 (Installation of DataSource)
0SM_SMG_ROOT Oberster Knoten Solution Manage
0SM_SMG Solution Manager
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400 DB400 Data
0SM_DSWPBI_DBADA Adabas Data
0SM_DSWPBI_DBDB2 DB2 Data
0SM_DSWPBI_DBINF Informix Data
0SM_DSWPBI_DBMSS SQL Server Data
0SM_DSWPBI_DBORA Oracle Data
0SM_DSWPBI_MODUL Module Data
0SM_DSWPBI_PERF Performance Data
0SM_DSWPBI_SERVER Server Data
0SM_DSWPBI_SYSDATA System Details Data
0SM_DSWPBI_SYSTEM System Data
Our current situation is that we have scheduled the jobs through Solution_manager > solution Reporting > BI Data collection. Yet no data has been collected and the jobs are getting cancelled.
Has anyone come accross this same situation before? Plus I have just found out that on SOLMAN_WORKCENTER under System Monitoring there is a reporting step named IT PERFORMANCE reporting that needs to be configured.
Please advice since this will be critical for our busines.

Hello,
I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
Regards
Andreas

Steps to configure BPM report from Solman 7.00 for productive system ECC6.0

Hi all,
Please given me the steps to configure Buisness process Monitoring reports from Solman 7.0 for productive system( ECC6.0, windows & database oracle 10.2),
I wanted to create the Reports of monitoring the buisness.
Regards,
Akash Basis consultant.

Thanks for replying Volker von Gloeden,
This thread is my first one in SDN & I am very glad that someone has given the answer ,
I will take a look for solution you have provided & will inform you.
Thanks again.

Configure System monitoring in SOLMAN

Hi
I need some help on this. For now I have installed solman / windows 2008 / oracle 10g on VM. A test system has been added as a satellite system in solman. CCMS Agent and CCMS PING has been installed in the satellite system. I am able to use my Alert monitor in solman to check out alerts from the satellite system. what do I need to do next to integrate this with solution manager?
I have reads the document http://help.sap.com/saphelp_sm40/helpdata/EN/0b/160419162a476380b5608e7f27a742/content.htm
This talks about "Setup system monitoring" and going into change mode. I dont see the change mode or the option to setup system monitoring.
PS: SMSY is setup correctly, I can see my satellite system from there.
any ideas on how to proceed will be appreciated.
thanks
ravi

The "Setup system monitoring" option showed up after in went into solutions overview in solution_manager Tcode and clicked on a number (hyperlink) under System monitoring for SAP Solution Manager Reference

SALRT_CREATE_API with CBMA and/or Central Monitoring using Solman

Hi,
Does anyone know if function SALRT_CREATE_API can be used to raise alerts in Component Based Message Alerting (CBMA) and/or Centralised Monitoring in Solman? I understand SALRT_CREATE_API worked with the classic Alert Framework.
Che

Hi Michal,
Thank you for jumping in on this thread. Great timing with your blog
However the following thread suggests we can still use SALRT_CREATE_API:
XI Alerting and Central Monitoring : some alerts remain on PI
"Try removing the "CentralMonitoringServer-XIAlerts" RFC connection from both systems (proxy and PI). Then, ensure all com.sap.aii.rwb.server.centralmonitoring.* parameters are configured correctly on PI (restart system to apply changes on exchange profile) and try executing the scenarios again.
Check the target CCMS system the RSALERTDISP report and see if the alerts are being received there."
Perhaps the above only applies in the case of a dual stack? I am not quite ready to try some examples but when I do then perhaps options will become clearer to me. I will try to remember to update this thread with what I find.
Thanks
Che

High Update Response Time ticket from solman

Hi Experts,
We have monitoring setup from solman. We are getting an alert for ECC prod that the there is High Update Response Time. Can you please let me know how to fix it?
Thanks,
Asad

Hi Asad ,
How many update work process do you have . See a high amount of wait time for the update process
You may increase their number if you have enough memory .
Go to SM13 , Go to -> Administration of update system
Goto - > Statistics
Response Times: Rules of Thumb - CCMS Monitoring - SAP Library
Less than 1 second is the recommended , though sometimes you may breach it .
Thanks ,
Manu

Regarding Availability Monitoring.

Hi All,
We are using SOLMAN 7 for availability monitoring of our system landscape.
We have installed CCMSPING agents in all the servers and all are running fine.
For our BI system we are not getting the availability data for the different instances. In RZ21 availability monitoring we are able to see only the Central instance of the our BI system and not any of the other app. instance.
We checked the CCMSPING agent of all application servers in BI system and they are up and running and all RFC related to CCMSPING in SOLMAN are working fine but still no data.
We also checked the /etc/host file of SOLMAN and message server for BI is mentioned there.
How can we involve the application instances in SOLMAN for BI please help on this.
Regards,
Arun Pathak

Hi,
Check this Link for the Performance monitoring-
http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/6921e784677d4591053564a8b95e7d/content.htm
<i>g)system alarm trigger a page, FAX, email, etc..?</i>
>>>Is available.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/20934259a5cb6ae10000000a155106/content.htm
Regards,
moorthy

Availability monitoring using CCMSPING..

Hai,
Iam facing problem in Availability monitoring using CCMSPING. CCMSPING is installed on CEN system which is a SOLUTION MANAGER system with SAP_BASIS - Release 702 and Level - 0002. (SAP EHP 1 for SAP NetWeaver 7.0)
We have 4 Production systems in the landscape out of which 2 systems are not reporting the data in RZ20 in CEN under 'Availability Monitoring' MTE. I got the below error when I tried to Test ping the connection for the faulty servers in RZ21 in CEN.
Error:
CCMSPING communication error: Cannot access message server
Also I got the below pasted errors from dev_ccmsping from the CCMSPING working directory.
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 1x.1xx.1x.xx:3600) [nixxi.cpp    2823]
ERROR => MsIAttachEx: NiBufConnect to /H/xxxxx.xxxxxxx.xxx.xxxx.COM/S/sapmsxxx/sapmsxxx failed (rc=NIECONN_REFUSED) [msxxi_mt.c   652]
ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED) [lgxx_mt.c    3980]
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 1x.1xx.1x.xx:3600) [nixxi.cpp    2823]
ERROR => MsIAttachEx: NiBufConnect to /H/xxxxx.xxxxxxx.xxx.xxxx.COM/S/sapmsxxx/sapmsxxx failed (rc=NIECONN_REFUSED) [msxxi_mt.c   652]
ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED) [lgxx_mt.c    3980]
ERROR => Error response: 404 - expected: 200 [csmhttp_mt.c 465]
I have checked the /etc/services files as well but no luck. Please help me with suggestions.
Thanks in advance.
Regards,
Yoganand.V
System details:
Kernel release: 701
Operating System: Linux 2.6
OP release: 2.6.5-7.282-smp
Database system: ORACLE
Release: 10.2.0.4.0
Machine type: x86_64

Hai Dirk,
I have checked all the ways possible, we have sapms<SID> in the IP service name filed.
Tried with 36<Instance number>, aslo tried with IP address in the host name filed but no luck.
We have 4 PRD systems out of which 2 works and the other 2 is not working. The working systems are 640 systems and the other two systems which is not working are 620 systems.
I have tried updating CCMSPING to the latest patch level as well.
The services file in the CEN system is maintained with correct values.
We have SAPROUTER running in our CEN system, and the entries can be found in my previous post.
We are not using the router to connect because the systems which are working do not have any router string attached to them.
Please let me know if you find any reason for the problem.
Thanks in advance.
Regards,
Yoganand.V

No availability monitor defined in RZ20 error

Hi All,
I have configured NWA with the ABC system ( CEN system) with the monitored system XYZ. I am able to see all the reports, logs etc from ABC for XYX system through login to http://ABC-host:port/nwa.
But while going to monitoring -> availability i am getting the below error:
"No availability monitor defined in RZ20; check version of central monitoring system"
Please tell me where i am worng here.
Thanks,
Rohan

Hi Chandra,
Both of the agent is running fine and i am able to test successfully in ABC (CEN) system) under RZ21.
But the problem is occuring in only NWA.
Thanks,
Rohan

Can we Transport CRM,ECC,EP request from SOLMAN 4.0

Hi ,
We are under NW2004s implemnetation CRM5.0,XI7,BI7,and EP7.0.
Client wanted to Implement transport configuration from solman 4.0 to all these components.I have experiance on Individual component STMS .
Not sure how to transport from solman.
As i know that solman is only monitoring system.Can we transport CRM,EP,BI,XI tranport request from SOLMAN .Istaead of loggin in other systems?
Your reply would be greatly appriciated.
Thanks
Kristene

Just to elaborate a little more on the point above that "All the existing transport requests in queue will be transported to SOLMAN STMS"...
This is quite correct, when SolMan takes control of your landscape all the old transports, however far they've gone on their way to production, are visible from SolMan (STMS)...
However, if you've configured TMS as recommended for change request management (and you should to avoid security loopholes) and without reverting to playing around on the operating system level, you'll find that you are no longer able to do anything at all with them (via STMS for example). Stuff unreleased in development, can no longer be released, transports not yet imported in Quality or production cannot be imported... it's like a total freeze on all the 'old' stuff.
Fairly simple to work around though - before the go live with SolMan, be sure to clear out and get live as much as you can to reduce the number of 'old' transports still in process somewhere.
When you're live with SolMan, you'll then need to create new Change documents for the 'in process' changes. Follow the SolMan process up to the point of creating transport requests, and then, in the development system, use transaction SE10 to transfer the contents of the 'old' transports into the 'new' ones created via SolMan. You can then use the SolMan process to migrate the transports.
Generally there's no problem with this, but occasionally, especially for workbench objects, you may find that you can't release the 'new' transports via SolMan. 99.9% of the time this is because the objects are locked in the 'old' transports, but you can usually use SE10 to delete/remove the objects/release or generally mess around with the old transport until the new transport can be released. Beware also that there is a risk of picking up the latest version of an object, rather than the version in the 'old' transport when using this process...
Hope this helps -ILL

Missing sapmsg.ini in Sapgui 7.2 for CCMSPING availability monitoring

Hi All,
I've been trying to locate the SAPMSG.INI file for configuring the CCMSPING availability monitoring through RZ21 on Solman, but could not find the sapmsg.ini file in the specified location of ' c:\winnt\sapmsg.ini ' which was mentioned in the SAPGUI logon pad's option window. Can you help me to locate this file?
Thanks,
Modena

Hi,
for 7.2 te config files wont available in c:
windows
it should be under C:\Documents and Settings\<username>\Application Data\SAP\Common
Please check the note also [Note 1442303 - SAP GUI 7.20 - replacement of SAPWORKDIR|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1442303]
check here
Thanks,
Jansi

Availability Monitoring from Solman

Similar Messages

Maybe you are looking for