Availability of Power BI Public Preview Outside US

We would like to know whether the data refresh can be working with SQL analysis services. Also, we would like to know when the Power BI Analysis services connector will be ready for Hong Kong as we found it is only supported in U.S. Please advise. Thanks.

I know it is not available in HK, but our customers want to know when it will be available, otherwise, we can do the project planning about the rollout of BI with our customers in HK. Most appreciated if you could let us know what is the estimated schedule
for the availability of BI analysis services connector in HK. Thanks.

Similar Messages

How to use Power BI designer preview to access a postgresql database

We have a postgresql 9.1 database which we want to connect to Power BI Designer Preview. I’ve setup the machine according to the instructions given in support.office.com
I am getting a error displaying:
DataSource.Error: PostgreSQL: Failed to establish a connection to <IP>.

Hi,
Did you provide your username/password through the Power Query credential dialog?
What authentication method is the database configured for?
Tristan
Hi Abhirich,
Have you been able to successfully authenticate the user after considering the questions presented by Tristan?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com, Twitter:
@nimblelearn

Are all features available in Power BI for office 365 available in On-Premise Excel, SQL server etc

Are all features available in Power BI for office 365 available in On-Premise Excel, SQL server etc
Thanks
Nate

No. The tools used to create Power BI reports are available in the on premises versions:
Power Query
Power Pivot
Power Map
Power View
To take advantage of these in a PowerBI site, or to use Q&A you need a subscription to Office365 with a PowerBI license.

Announcing the Azure Data Catalog public preview

Getting started with Azure Data CatalogToday at the World Wide Partner Conference, we officially announced public preview of the Azure Data Catalog. A fully managed service in the cloud that empowers any user from data scientist and data developer to data analyst to register, enrich, discover, understand and consume enterprise-wide data sources.This article describes how you get started using the Data Catalog.Already using Azure Services?If you are already using Azure, your organization has enabled Azure Active Directory and you have an Azure Subscription you can get up and running on the Data Catalog in minutes.Simply go to http://www.azuredatacatalog.com/: Select an existing Azure Subscription, select a Catalog Location, select an Edition, add Users, add Administrators and choose Create Catalog.Data Catalog uses Azure Active...
This topic first appeared in the Spiceworks Community

Getting started with Azure Data CatalogToday at the World Wide Partner Conference, we officially announced public preview of the Azure Data Catalog. A fully managed service in the cloud that empowers any user from data scientist and data developer to data analyst to register, enrich, discover, understand and consume enterprise-wide data sources.This article describes how you get started using the Data Catalog.Already using Azure Services?If you are already using Azure, your organization has enabled Azure Active Directory and you have an Azure Subscription you can get up and running on the Data Catalog in minutes.Simply go to http://www.azuredatacatalog.com/: Select an existing Azure Subscription, select a Catalog Location, select an Edition, add Users, add Administrators and choose Create Catalog.Data Catalog uses Azure Active...
This topic first appeared in the Spiceworks Community

I have an Imac G5 running on Mac OSX 10.4.11 and would like to upgrade to Lion. I need to upgrade to Snow Leopard first but the aplle dealer tell us here the Snow Leopard is no more available on Power PC. Can anyone help?

I have an Imac G5 running on Mac OSX 10.4.11 and would like to upgrade to Lion. I need to upgrade to Snow Leopard first but the aplle dealer tell us here the Snow Leopard is no more available on Power PC. Can anyone help?

Does your Mac meet Lion's requirements?
Apple - OS X Lion - Technical specifications
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Snow Leopard requirements:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation

How to extract all the list of reports names available in the WEBI public?

can anyone please help me how to extract all the list of reports names which are available in the WEBI Public folder?
I ran the VB macro downloaded from net but that is extracting all crystal,deski & webi reports..
but i want only webi list of reports..
Please help me to achieve this?
Thanks
Radha

Is this about Business Objects WEBI? You might want to post in the BOBJ forums instead.[BOBJ Forums|/community [original link is broken];

Error Installing Service and portal of MIM Public Preview

I try to install the Public Preview. Right at the beginning of the Setup Procedure of the Service and Portal the Setup stops with the error below.
Thanks for your help.
Henry
MSI (c) (70!D0) [08:55:53:380]: Creating MSIHANDLE (5) of type 790531 for thread 5840
Calling custom action Microsoft.IdentityManagement.PasswordResetCAs!Microsoft.IdentityManagement.ManagedCustomActions.PasswordResetCustomActions.GetIISVersion
MSI (c) (70!D0) [08:55:53:411]: Closing MSIHANDLE (5) of type 790531 for thread 5840
MSI (c) (70!D0) [08:55:53:426]: Creating MSIHANDLE (6) of type 790531 for thread 5840
Error: could not load custom action class Microsoft.IdentityManagement.ManagedCustomActions.PasswordResetCustomActions from assembly: Microsoft.IdentityManagement.PasswordResetCAs
MSI (c) (70!D0) [08:55:53:426]: Closing MSIHANDLE (6) of type 790531 for thread 5840
MSI (c) (70!D0) [08:55:53:426]: Creating MSIHANDLE (7) of type 790531 for thread 5840
System.IO.FileLoadException: Could not load file or assembly 'Microsoft.IdentityManagement.PasswordResetCAs, Version=4.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name validation failed. (Exception from HRESULT:
0x8013141A)
File name: 'Microsoft.IdentityManagement.PasswordResetCAs, Version=4.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' ---> System.Security.SecurityException: Strong name validation failed. (Exception from HRESULT: 0x8013141A)
The Zone of the assembly that failed was:
MyComputer
   at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection)
   at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.AppDomain.Load(String assemblyString)
   at Microsoft.Deployment.WindowsInstaller.CustomActionProxy.GetCustomActionMethod(Session session, String assemblyName, String className, String methodName)
MSI (c) (70!D0) [08:55:53:426]: Closing MSIHANDLE (7) of type 790531 for thread 5840
CustomAction GetIISVersionFromRegistry returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (c) (70:9C) [08:55:53:442]: Closing MSIHANDLE (2) of type 790542 for thread 5144
Action ended 8:55:53: GetIISVersionFromRegistry. Return value 3.
Action 8:55:53: FatalError.
Action start 8:55:53: FatalError.
Action 8:55:53: FatalError. Dialog created
Action ended 8:55:55: FatalError. Return value 2.
Action ended 8:55:55: INSTALL. Return value 3.

On Thu, 8 Jan 2015 09:46:27 +0000, henryschl wrote:
I found a way to overcome the Setup error on my test Server. I disabled StrongNameVerification.
"c:\Install\MIM Preview\MIM PAM and SSPR 1484"\sn.exe -Vr *,31bf3856ad364e35
Steps 20 and 21 on pages 24 and 25 of the lab guide.
Paul Adare - FIM CM MVP
"...the nam-shub of Ousterhout." -- Malcolm Ray about Tcl

What is the max os upgrade available for power mac g5 w/powerpc processor

What is the max one can upgrade the os on a powerpc power mac g5

Hi, 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)

Windows drive no longer available at power up with Option key?

I've done a byte to byte copy of a separate disk drive (320GB) that was my Vista x64 bootcamp drive. (In a MacPro) to a new 750GB drive. After I completed the copy process, I pulled out the 320GB drive and put in the 750GB drive. I hold down the "Option" key during power on and expected to see both my Mac drive and my Windows drive boot option. Unfortunately I only see the Mac now.
If I go into OSX I can see my Bootcamp drive on my desktop (Untitled), can open it and see that all my windows files are there. So what am I missing to get my bootcamp drive to show up during the power on Option process?
Thanks, Rob.

RAID is destination for dmg image file.
But tried it again using a single Mac HD boot drive just to eliminate that possibility. Got the same error:
====Cloning NTFS filesystem to compressed dmg=======
hdiutil create -puppetstrings -srcdevice "/dev/disk1s1" "/Users/robainscough/Documents/Untitled.winclone/Windows" 1>&2
PERCENT:0.000000
MESSAGE:Preparing imaging engine…
diskimages-helper(424,0x100781000) malloc: * error for object 0x1021108d0: pointer being freed was not allocated
* set a breakpoint in mallocerrorbreak to debug
hdiutil: create failed - No child processes
return value of hdiutil create -puppetstrings -srcdevice "/dev/disk1s1" "/Users/robainscough/Documents/Untitled.winclone/Windows" 1>&2 is 256
hdiutil create -puppetstrings -srcdevice "/dev/disk1s1" "/Users/robainscough/Documents/Untitled.winclone/Windows" 1>&2 did not complete successfully
cleaning up: Mounting Disk
Volume (null) on /dev/disk1s1 mounted
Sun Jan 3 15:03:14 PST 2010
Since WinClone is freeware, I really wasn't expecting much. Does anyone know of any other tools that will get the job done?
Thanks, Rob.

Not enough physical memory is available to power on this virtual machine with its configured settings.

hi ... My opering system is windows 8.1 and my system RAM is 6 GB with intel core i3 processor...
I got error in vmvare " not enough physical memory to start virtual machine. then after some day i visit at your webside and read the bolg about this error solution and i uninstalled the microsofts update like
"KB2995388" then reboot the system, after that i search config.ini file in drive "C:\Program Files (x86)\VMware\VMware Workstation" but i did'nt got this file, so i created a new "config.ini" file and write one line
vmmon.disableHostParameters = “TRUE” and save the file , then i copied this file to vmware workstation , like this path 'C:\Program Files (x86)\VMware\VMware Workstation' after that i opened my vmware and power on virtula machine but still i getting same error like not enough physical memory..........plesae any one can help me ? and give me a better solution to solve this problem ?

Welcome to the Community,
without any details about the VMware Workstation version you are using and the blog you read it's pretty hard to help. Anyway, the issue you mentioned was resolved with VMware Workstation 10.0.4 (see VMware Workstation 10.0.4 Release Notes), so in case you are running an older version it may be worth updating.
André
Message was edited by: a.p. - Fixed typo in version number 10.0.4 (instead of 10.4)

When will the russian street data be available in Power Map?

Hi all,
Are there any plans to implement Russian street data in the Power Map?
The regions and cities are added already and it's great for regional and federal companies. But local companies whose only market is their native city and who need to view the data by city district can't generate the map in a convenient way. Calculating
the geographical coordinates seems to be a solution but a time consuming one.
I see Bing now supports Russian streets in a full manner and even in native language. So hopefully it will be implemented the same way in the Power Map soon.
Thanks.

Any update for Eugene?
Euguene, you can also provide this feedback on Connect or by using the Smile/Frown feature in the UI.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

LR 3.3RC still eats all available ram and swaps during preview

I didn't see anything about ram issues being fixed in 3.3rc1... and can confirm I'm still seeing problems.
If I preview and rate 500 images LR starts swapping, as it ate 16gig of ram. After that, everytime you preview a couple of more images, it swaps another chunk of ram to disk and allocates more.
Personally, I think this is a bit excessive...
Any word on when this will be fixed?
Cheers!
Mac, 64bit, 16gig ram, dual quad core processors

It is a known and unfortunate limitation of how our current lens profile installation/uninstallation works. The workaround is to reinstall LR 3.2.

Is SAP going to make PowerBuilder 12.6 Evaluation version available for the general public?

When is SAP going to update the link to download the evaluation version of Powerbuilder to reflect the latest version?

Last statement (2014-08-12) can be found here PowerBuilder new release available:
"The eval version should be available in the next couple of days"
So... it's like before .. a day is a week ... a week is a month ...a quarter a year... it's the SAP calendar.

No content available in iTunes U Public Site Manager

I'm an admin for our university's iTunes U account, and for the last few weeks every time I log in through the site manager, I am able to log in, but none of the content loads. The only navigation options I have are "Collections" and "Courses," (no Reports, Pages, etc.) and both of those are empty, though our content is available through the iTunes Store.
I've logged in on multiple machines, and have made sure I'm using the current version of Safari (5.1.7) and have had the same result. Another one of our admins logged in and had the same problem, though one of our contributors was able to log in and access her content as usual.
I was able to create a new collection, but that is the only collection that is available.
Any thoughts about what might be going on?

Thanks for the suggestion, but that doesn't work either

Driving Directions for Japan now available! What about public-transport?

Just noticed that driving directions are now finally functioning for Japan! Does anyone know if the new firmware will bring a working public-transport function to Japan as well? It already worked (before driving directions did) on Google Maps, but just wanted to see if anyone with a beta version had tested it on the phone yet?

Thanks, Of Course. I didn't think about the NDA, was hoping for more along the lines of "a friend of a friend said...". Guess I will just have to wait and see if it works here or not.

Availability of Power BI Public Preview Outside US

Similar Messages

Maybe you are looking for