Availability of the SAP Discovery System for Enterprise SOA
Hello Everybody,
will the SAP Discovery System for Enterprise SOA only be avaliable as a appliance as I've read on NetWeaver04s on Discovery System? Will there be a normal installation like a IDES System?
Perhaps a good idea for a quick start would be a peinstalled Linux Based VMWare Image :-).
Regards
Gregor
Hi Gregor,
among the reasons for shipping the Discovery System as an appliance are legal reasons. So as long as there are 3rd party components involved (from SAP perspective) you'd need to be an official distributor for them. Obviously this restriction applies to VMWare Images as well.
An IDES-like installation is facing the challenge of integrating multiple components (that normally have to be installed separately) and their configuration data during the set-up already. This can be done as the example of Rapid Installer shows. But it is certainly more work to accomplish it.
As always: Making a complex system easy to use/set-up requires extended efforts behind the scenes. So it is always necessary to find the trade-off between "time to market" and "plug-and-play". So currently the availability as appliance is a compromise of both.
Best Regards,
rAimund
Similar Messages
-
Dear all,
Do you know if customers who run a SAP Discovery system are entitled to any kind of dedicated support from SAP? For instance, via their regular support engagements such as Standard Support, Enterprise Support, Safeguarding or MaxAttention?
Or do they have to contact another instance within SAP if they require help with the setup or operations of the SAP Discovery system?
Thanks a lot in advance!
Best regards
GregorHi Gregor,
The Discovery system is supported via CSN. For any Discovery System related issues, please open a CSN ticket on component CA-SOA-DS.
thanks,
Deepa -
SAP Discovery System Procurement
Does anyone have the contact information for the current & active HP representative responsible for the SAP Discovery systems?
The listed HP rep on the spec sheet is no longer responsible. The person he forwarded us to does not return calls. The front line HP sales representatives cannot find the current product listed. They assume since it was offered on a G5, which is now in end of life, the product is no long sold. Any leads would be helpful.
Kind Regards.Hi,
The primary contacts for the Discovery system from HP is available on the Discovery system home page : http://www.sdn.sap.com/irj/sdn/discoverysystem.
thanks,
Deepa -
Error when using interactive form on SAP Discovery system
Hello,
we are trying to make a customer interactive form on the SAP Discovery system, everything works fine until we try to run a preview with interactive and changeble parameters turned on. By the way there is a SAP provided credential on the system. (system SAP ECC 6.0 sp08)
the following error occurs while calling the ADS;
first error message:
error while logging into credential 'GeneralError: Operation failed.
SecurityHandler.login:-1:
The Digital ID specified is unknown.
Date : 03/23/2007
Time : 16:04:56:997
Message : error while logging into credential 'GeneralError: Operation failed.
SecurityHandler.login:-1:
The Digital ID specified is unknown.
Severity : Error
Category :
Location : com.adobe.document.PDFManipulation
Application :
Thread : SAPEngine_Application_Thread[impl:3]_30
Datasource : 103929350:D:\usr\sap\ERP\DVEBMGS10\j2ee\cluster\server0\log\defaultTrace.trc
Message ID : 0018FEFB4E8F00710000013D0000160000042C5960F15BB3
Source Name : com.adobe.document.PDFManipulation
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction : dcf0bd50d94f11db8e950018fefb4e8f
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives :
Resource Bundlename :
Session : 0
Source : com.adobe.document.PDFManipulation
ThreadObject : SAPEngine_Application_Thread[impl:3]_30
Transaction :
User : J2EE_GUEST
second eror message:
Date : 03/23/2007
Time : 16:04:57:013
Message : Processing exception during a "UsageRights" operation.
Request start time: Fri Mar 23 16:04:53 CET 2007
com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_ERP_103929350\DM-8398477217709800775.dir\DM-8673971829680153343.tmp
Specific error information:
$$$/PDF/PDFCredentialLoginFailure2=error while logging into credential '^0'
GeneralError: Operation failed.
SecurityHandler.login:-1:
The Digital ID specified is unknown.
General error information:
IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0
Severity : Error
Category : /System/Server
Location : com.adobe.AdobeDocumentServicesWorker
Application : com.adobe/AdobeDocumentServices
Thread : SAPEngine_Application_Thread[impl:3]_27
Datasource : 103929350:D:\usr\sap\ERP\DVEBMGS10\j2ee\cluster\server0\log\defaultTrace.trc
Message ID : 0018FEFB4E8F0067000001290000160000042C5960F1B348
Source Name : com.adobe.AdobeDocumentServicesWorker
Argument Objs :
Arguments :
Dsr Component : IWDFVM2160.wdf_ERP_103929350
Dsr Transaction : d5fe2cd2d94f11db90b20018fefb4e8f
Dsr User : ADSUSER
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives : /System/Server
Resource Bundlename :
Session : 11645
Source : com.adobe.AdobeDocumentServicesWorker
ThreadObject : SAPEngine_Application_Thread[impl:3]_27
Transaction : SAP J2EE Engine JTA Transaction : [631ffffffd66002b7d]
User : ADSUSER
third error message:
Date : 03/23/2007
Time : 16:04:57:013
Message : Client: 200 SystemId: ERP AppName: SAFP
Processing exception during a "UsageRights" operation.
Request start time: Fri Mar 23 16:04:53 CET 2007
com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_ERP_103929350\DM-8398477217709800775.dir\DM-8673971829680153343.tmp
Specific error information:
$$$/PDF/PDFCredentialLoginFailure2=error while logging into credential '^0'
GeneralError: Operation failed.
SecurityHandler.login:-1:
The Digital ID specified is unknown.
General error information:
IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0
at com.adobe.ads.request.UsageRights.execute(Unknown Source)
at com.adobe.BaseADSRequest.doWork(Unknown Source)
at com.adobe.AdobeDocumentServicesWorker.execute(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.adobe.document.pdf.CredentialLoginFailure: IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0
at com.adobe.document.pdf.CredentialLoginFailureHelper.read(CredentialLoginFailureHelper.java:67)
at com.adobe.document.pdf._PDFDocumentStub.setUsageRights(_PDFDocumentStub.java:284)
at com.adobe.EJB_PDFAgent.setUsageRights(Unknown Source)
... 31 more
Severity : Fatal
Category :
Location : com.adobe.AdobeDocumentServices
Application : com.adobe/AdobeDocumentServices
Thread : SAPEngine_Application_Thread[impl:3]_27
Datasource : 103929350:D:\usr\sap\ERP\DVEBMGS10\j2ee\cluster\server0\log\defaultTrace.trc
Message ID : 0018FEFB4E8F00670000012A0000160000042C5960F1B5C1
Source Name : com.adobe.AdobeDocumentServices
Argument Objs :
Arguments :
Dsr Component : IWDFVM2160.wdf_ERP_103929350
Dsr Transaction : d5fe2cd2d94f11db90b20018fefb4e8f
Dsr User : ADSUSER
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives :
Resource Bundlename :
Session : 11645
Source : com.adobe.AdobeDocumentServices
ThreadObject : SAPEngine_Application_Thread[impl:3]_27
Transaction : SAP J2EE Engine JTA Transaction : [631ffffffd66002b7d]
User : ADSUSER
Hopefully these messages will ring a bell and some of you have a solution for this problem.
Many thanx in advance
Jasper BrugmanDear friend,
Check the Below link
https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/24b9e126-0b01-0010-e098-f46384fad9f3 -
Hi Advisers,
I'm now exploring the SAP Discovery System, V3 and am looking under the Banking scenario. May I know where can I get more documentation/ demonstration about banking anywhere in the site? I'm having difficulty looking for it in the SAP Marketplace and community network.
Another possible area that I would like to explore is more on the services related industry instead of product based industry. May i know where can i look under for more information.
Your help is greatly appreciated.
Thank you.Hi Dirk,
Unfortunately not, in the DSv3 the PI 7.0 is using the same NW 7.0 stack that is used by the ERP 6.0. You can't upgrade PI 7.0 to PI 7.1 without effecting the ERP. PI 7.1 runs on NW 7.1 while ERP 6.0 runs only on NW 7.0.
Itai -
How to access SAP Discovery system V4
Hi,
Can anone accessed SAP Discovery system V4? if so how to get the SAP discovery system server details and log-in credentials?
Thanks,
SivapratapHello,
Try going though this
http://www.sdn.sap.com/irj/sdn/discoverysystem-user
regards.
roberti -
Reqarding SAP Discovery System
Hi,
Would anyone Provide Informtion about SAP Discovery System for eSOA. What is it all About. How get get access. Its Version Details etc.
Regards,
VarunHi
check this page
SAP Discovery System for Service-Oriented Architecture - Additional Services
regards
krishna -
Dear Experts,
Can you please suggest me list of activities require to automatically create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
RamHi Raghu,
Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
In SAP ECC system:-
Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
2. In SAP GTS system:-
Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
Ensure that the Number range is maintained for those GTS Business Partners.
Also, some time you may be required to maintain the organisational structure to ensure full working.
I hope this will be helpful to you.
Regards,
Aman -
Client strategy for SAP Discovery system
Hello,
We have installed SAP Discovery system and would prefer to create custom clients copied from the standard clients for use by the users. Please let me know if there are any restrictions or possible problems creating custom clients in SAP Discovery system.
Thank you,
VijayaHi,
There are no restrictions for creating custom clients on the Discovery System box.
It is highly recommended to backup your current server before customizing the box so you can return to the original state if needed.
Regards,
Amir -
How to make database instances available in the SAP MMC
Hello,
I have been trying to figure out on how to make a database instance, which I installed on the MSSQL Server, available in the SAP Management Console in order to start the instance. I am able to view the instance over the Enterprise Manager of the MSSQL Sever, but I cannot start it from there (this is only possible from the SAP MMC). I have the SAP MMC installed on my computer, but just cannot figure out on how to control the instance from there because I cannot see it.
I hope someone can help me on this matter!
Thanks....
KatharinaHello Katharina,
Run SAP MMC and right-click to SAP R/3 Systems.
Choose properties and go to Fixed tab.
In 'System' field enter Your SID (e.g. EBP)
In 'Instance' field enter hostname<space>instance number (e.g. epb01 10) Remember, there is space between ebp01 and 10.
Click on 'Add' button and then OK.
Best Regards,
Marcin Gajewski -
Difference between SAP/APO/DP and the SAP/CRM solution for forecasting
Hi,
Can you please help me identifying the main differences between SAP/APO/DP and the SAP/CRM solution for forecasting? Advantages and disadvantages?
Thanks a lotHi LCD777,
Forecasting at DP & CRM are altogether at different entities. CRM involves webbased data transfer mechanism tool whereas DP is database/livecache driven tool.
In CRM, you dont get optimised solution of forecasting out of it whereas in DP you can get as much as
optimised solution & flexibility as per your requirements.
DP is majorly a forecasting tool where in huge statistical method functionalities are embedded in
whereas CRM is majorly a transactional tool wherein it involves gathering of forecast data and executing it.
Typically, CRM will be integrated with DP containing GATP environment & ECC so that DP will plan for forecast data, ECC system drives sales order data & GATP calls for availability check and finally
the forecast execution& transactions will be controlled by CRM
Regards
R. Senthil Mareeswaran. -
I am looking for overview about SAP discovery system.
1. What is SAP discovery system ?
2. How it is different from other R/3 system?
3. Whether it is hardware dependent. I heard it is not available as software package?
4. What are components . As a developer how i have to approach discovery system for development?
Thanks
a®I am looking for overview about SAP discovery system.
1. What is SAP discovery system ?
2. How it is different from other R/3 system?
3. Whether it is hardware dependent. I heard it is not available as software package?
4. What are components . As a developer how i have to approach discovery system for development?
Thanks
a® -
Can i use the SAP standard package for lock object creation ?
Dear Guru ,
I want to create a new lock ojbect for my abap program .
When i completed the creation , SAP required a new request and it said the object only can be imported to SAP standard package .
But i saw the help from SAP said :
>* Package begins with A-S or U-X:
>These packages are for SAP standard objects. Customer objects cannot be created in them. Changes to objects of these packages are recorded by the Transport Organizer (Request management) and can be transported (see field transport layer.
In this case , Can i use one of the SAP standard package for this creation ? Does it will affect the SAP system ( such as the system upgrade ) ?
Thanks .
Best Regards,
Carlos Zhang
Moderator message - Please do not use code tags to format text - it should only be used for code
Edited by: Rob Burbank on May 25, 2010 11:12 AMHi Carlos...
First , You will never be able to use any standard SAP Package for your custom programs. So don't go for it.
So in your case what you need to do is , when you save your Lock object ,
- if you want Transport request to be created , then
in the screen shown you need to enter the Z package name (the same package as that of your ABAP Program)
or
-if you want it to be stored as local object , then
specify package as $tmp
Regards,
Uma -
Document store access caused errors in the SAP Correction System
Hi Gurus,
I have this user who is trying to make changes to a workbook in DEV which is published to a folder with some users who are assigned to role. This user is the only user with Developer 2 role. When the user make changes and try to save the workbook to her role or favorites so that the changes are transported to BWP, the user is getting "Document store access caused errors in the SAP Correction System".
Do we have any suggestions/solutions, I would really appreciate any help on this.I would also assign full points for the most helpful answer.I have exactly the same problem with the user who is trying to save the workbook, where he made minor change.
Any clues?
Thank you.
Vitaliy -
Business Package for SAP Best Practices for Enterprise Portal
Hi,
We are implementing EP for ECC 5.0 and we have to web enable some FI transactions like FB50/fb60 etc. We want to use standard business package for this. The only business package that caters this requirement is "Business Package for SAP Best Practices for Enterprise Portal 60.1". When i checked the data source for this business package, the specification is for "SAP R/3 4.6B and above". Does this work for ECC 5.0 as well? In general does the R/3 specific business packages work for ECC versions? Please let me know. Thanks for the help. I promise rewards.
Regards
HariHari,
When you download the BPO via Portal Content Portfolio,
each bpo has additional information on the release.
For example for the one you are inquiring about - Business Package for SAP Best Practices for Enterprise Portal, the additional release information is provided on the following links;
https://www2.iviewstudio.com/sdn/info/index.cfm?action=faqs&part=#QSR03
https://www2.iviewstudio.com/sdn/detail_view/index.cfm?action=package_information&CatalogSet=SAP%20Content&ItemID=17212&CFID=7544845&CFTOKEN=99283970
Regards,
James
Maybe you are looking for
-
How can I transfer iBooks from my 4th to 5th gen iPod Touch both running iOS 6, using iTunes 11?
I downloaded the e-book The 80/10/10 Diet by Dr. Douglas Graham directly onto my old 4th gen iPod Touch from interviewthemasters.com a while back so my Purchases in iTunes 11 still shows no books available to re-download. _None_ of my iBooks content
-
Friends, I really need your help to remove the waring message. For the purpose of changing the description on the Selection screen from Cost Cetnters (Authorised Values) to Funds Centers I had changed the ZCCTRATI variable description to Funds
-
Need help changing the default download location in Firefox3.6.16
<blockquote>Locking duplicate thread.<br> Please continue here: [/questions/808920]</blockquote><br> I have been having default download location problem for over a year now and no one has been able to offer a solution so if you can figure this out,
-
Building database applications with business catalyst
If i have a small project when i want to upload some data (hosting a database on business catalyst) daily via excel sheet and wanted to run reports against that data. and i also want my site visitors/paid users should also able to run some self serv
-
Hello, i have 2 HP PRO 3500MT one of them won't start: error Monitor is going to sleep, when i start the comp. the numlock light on the keyboard won't go on. i use the videocard onboard VGA. i have changed memory HDD PSU different Screens stand allo