Availability quanity for Assembly order.. ??

Hi experts,
where is the settings for availability quanity for assembly order..
problem is..
after creating sales order when we wanted to do change ..that time i am not getting availability quantity..
Thanksin Advance,
Anthyodaya...
Edited by: anthyodaya Reddy Nagaram on Jun 12, 2009 1:17 PM

Hi
Once the goods are produced/assembled, you have to receive into your stock then only it will show as available quantity.
Find out the assembly order . You can find out by going to the item details > schedule line tab > click on the "Procurement" tab > you will find the Assembly order no.
Go to the Header of the Assembly order, where you can find the "Start date" and the "Finish date" of assembly processing.
The "Finish date" of the Assembly order corrosponds to the "Material availability date" of the SD department.
But, you have to receive the goods as a special stock into your Plant in the Storage location, then only it will show as available quantity.
To, receive the goods ,use transaction code MB31(goods receipt for order).
Use, Movement type - 101, specify the Assembly order no., Plant, Storage location and click on the "Adopt + details" button.
In the next screen, enter the material and quantity and save it.
Now, your stock is received in your Plant as a special stock called "Sales order stock".
You can check the stock in MMBE.

Similar Messages

Error-M2O-Settlement rule for assembly order for item...could not be genera

Hi,
When I am creating Sales Order (VA01) for M2O, I am able to do the costing and copy the EK02 condition type. I have verified the the incompletion log, it indicates that document is complete.
But while saving the sales order, the below error message is displaed:
Settlement rule for assembly order for item 000010 could not be generated. Should the order still be saved?
                Yes/No
1. If No is choosen the following error message is displayed
       Error when processing Production order
      Error when processing Production order
      Message no. V1380
      Diagnosis
        A technical error has occurred. On calling up the assembly interface, exception 5 was triggered. The exceptions have the following meanings:
1 = External block, 2 = General error, 3 = Insufficient data for the interface, 4 = Order was not found, 5 = Update has been rejected, 6 = Final document number for Production order is not issued. Procedure: Inform your system administrator.
2. If Yes is choosen, it is creating Production Order without settlement rule. Able to perform GI & Gr. If I try to enter settelement rule (Settlement receiver SDI - Sales document item) in production order (CO02), the belwo error message is displayed
"Distribution rule for Sales document item can only be created automatically Message no. KD063"
We are using the requierement class with below details:
Reqmts class: ZSO- for M2O
AAC = E, Valuation = A, Settlement profile =SD1, RAKey = 000004, Assembly type = 3.
Settlement profile contain:
Allocation structure, PA structure, Default object type = SDI. Valid receivers: Optional -Sales Order / Prof. seg.
If I make the Valuation field as blank in Reqmts class, there is no error while creating Sales order. And also Settelemnt rule with sales document item as receiver is successfully creating for the production order. Since the Valuation is blank in requirement class, it is Non valuated Sales order stock. All GIs & GR are non valuated
The business requirement is it should be valuated sales order stock and the production varinaces has to be settled to Sales order. Then Sales order has to be settled to COPA.
Need your valuable inputs to meet this requirement.
Let me know if you need any further details.
Thanks in advance.
Regards,
ADI

Dear SAP PP Consultant ,
What is the strategy group you are maintained in the material master ?

Posting rule for assembly order for item 000000 could not be generated

Hi all,
While creating production order from sales order system giving an error message 'Posting rule for assembly order for item 000000 could not be generated.'
Kindly help to resolve the issue.
SmanS

Dear SAP PP Consultant ,
What is the strategy group you are maintained in the material master ?

Material availability check for production order

Hello,
Is there any functional module to check the material availability of production order. So that it can be used in developments.
Regards,
Ganesh

Hi,
Following are the available Function Modules for avaibility checks in Production orders,
BAPI_PRODORD_CHECK_MAT_AVAIL - BAPI: Execute Material Availability Check for Production Orders
And for Process Orders,
BAPI_PROCORD_CHECK_MAT_AVAIL - BAPI: Execute Material Availability Check for Process Orders
Regards,
Dhaval

Budget Availability Control for Maintenance Order

Hi,
Can anybody tell me that how to activate Budget Availability Control for Maintenance Order ? For Internal orders, it is already activated but for Maintenance Order (Category 30, type PM01), it is not activated.
Please tell the procedure for activation for the same.
Thanks in advance,
Regards
Satadal

Thanks.
But I have added Budget profile from Plant Maintenance -> Order type settings.
So, I can assign only maintenance related Investment program and positions in my Maintenance Order.
But as availability control is not activated, System is not stopping me to issue Goods against that Order even if there is no Budget.
I need to have that control for Maintenance Order that we should be able to issue material against that order only if there is a budget.
That's why I want to activate this control but don't know how to do it.
Can you tell me how I can do the same - depending on order type or individually?
Thanks and Regards
Satadal

Bapi or Function Module to do the availability check for Planned Orders

Hi all,
I need a Bapi or a Function Module to do the availability check for a Planned Orders. Anyone knows how?
I will use it in an Exit.
Thanks in advance
Points will be given

I think I found it.
If anyone is searching for it too, we will use these one:
CO_ZA_AVAIL_CHK_ORDER_MULTI

Change available quantity for Sales Order line during ATP control

Hello,
When sales order is created and item line is entered I need change available quantity for material. I mean not ATP quantity but available quantity (MCHB-CLABS for material/plant - I need remove some batches from logic)
Could you tell me when I could add my enhancement for above purpose?
Thanks in advance,
E

Did you try the assignment (Enhancement) ATP00001?

SERIAL NUMBERS FOR ASSEMBLY ORDERS

hI,
I would like to know, how serial numbers for Assembled products be assigned .
If possible, please explain it in details as I'm in different module altogether.
Regards
RD

Hi Durai,
1. First You need to assign the Serial number profile in Material Master under Plant data2.
2. System will create serial numbers at the time of production order release.
3. a) In QM point of view under Inspection type active tick mark in Serial numbers.
b) Your MIC should be single result recording and Sample size should be 100%.
C) with r. to above you can record the result as well as stock posting done serial number wise.
Revert further clarification.
Regards,
S.Babusingh

Material Availability Report for Sales Order

Hi,
Is there any report which gives me for a sale order line item which is either pending or not yet picked in delivery, but for which stock is not available. If such report is not available then what to we do for getting the same?
Regards,
Ajit

Hi ajit
In VA05 itself you can see Ordered qty, Open order qty and confirmed quantity , Delivered qty , Delivered date .Even Laxmipathi also said same thing and i also agree with his words.
Regards
Srinath

Availability check for sales order stock

Hi,
We use sales order stock in sales order which creates purchase requisition automatically.Movement types for GR 101E, for GI 601E. Material master data has on MRP2 view as GR processing time 2 days for example. I create sales order with requested delivery date today.After saving SO, PR is created and I create PO with delivery date today and post goods receipt document for today. System gives as confirmation date today + 2 days. although the material is in stock.
We use also project stock in sales order which creates purchase requisition automatically.Movement types for GR 101Q, for GI 601Q.I run the same scenario for the same material. As soon as I create the purchase order system confirms the open quantity in sales order for today. (Scope of availability check is the same for both sales orders and includes PO)
What can be the reason?
Thanks

Hi Murat,
i guess the problem is with the 'Check without RLT' indicator' in Availability check control. For the MTO (checking rule AE) i guess this indicator is not set but for the Project systems (Checking rule PS) this indicator is set. This makes the difference. Do the changes as desired in transaction OVZ9.
Please check and revert back if you are still facing the same problem.
regards,
Kathir

Update Material Availability Date for Sales Order having a Delivery

Dear Gurus,
We have a bit out of the way scenario. There is a o/b delivery already added to a shipment. And then we receive a IDOC from external MES System (i.e. Production) with new material availability date. This new material availability date is updated on Sales Order. In short the order is delayed.
Current Solution:
In this case the user has to remove the delivery from the shipment manually. then the IDOC deletes the delivery and the updates the sales order with new date followed by creation of new delivery.
The business expects to updated the Sales Order material availability date without changing Shipment / delivery. Any solution?
Current solution has to be changed as for Shipment purpose changes are made to delivery which are lost when the delivery is deleted.
Edited by: abhishek singh on Feb 3, 2012 10:21 AM

hi
in this case you have to adopt the business process change.
you have to update the EDI first and then you create delivery.

Availibility check for sales orders created simultaneously

Hi SD experts,
When a sales order is being created with an item "A", while a second sales order is being created too, at the same time, with the same item "A", the system can't carry out the availibilty check.
It displays the following message : "The material A (plant M500) in item 000010 which you entered for processing is blocked for another transaction. The system is therefore unable to carry out either the availability check or the transfer of requirements."
This is quite logic... But for example for a call center where the operators create orders simultaneously how can we make it possible??
Any suggestions please ?
Thank you,
Bahia.

Hi there,
In SPRO -> SD --> Basic functions --> Availability check & TOR --> Avaliability check --> Avaliability with ATP --> Define material block for other users.
Here you make the settings for different availability check types 02 for individual requirements etc. If you check the field Block, system will block the material for other remaining sales orders if availability check is being carried for one sales order. It is set at plant level. If same material is available at other plants, it will be available there.
Regards,
Sivanand

Availability check for Sales order

Hi Experts,
I have material say 100199 in which I maintain In house production time as 10 days.
Now I have to create Sales Offer for this material and system check availabity and give delivery date for Offer from Inhouse production time maintained.
Problem is this In house production time is independent of Order quantity so system will give same delivery date irrespective of quantity in sales order.
I want system should propose me delivery shedule from master data maintain
i.e if order is of 120 qty then system should propose and for 30 lot i requires 3 days to manufacture.Order creation date is 09/12/07
30   12/12/07
30   15/12/07
30   18/12/07
How I can achive this in SAP?

Hi Lalit,
You can give Lot size dependent In house Production stimes in Work Scheduling View of Material Master. You can do it in MM02. Wish this solves your problem.
Regards
Krishna

Issue in finding GR posting date and quanity for Purchase order item

Hi All,
I have a requirement to list all PO items with Goods receipt posting date and quantity.
So for each po item I have fetched Goods receipt posting date and quantity from table EKBE for movement type 101.
But in transaction ME23n in PO history tab it is displaying 3 records.
2 are movement type 101 and 1 is movement type 102 GR quantity with minus sign.
How to find out Goods receipt posting date and quantity.
what are the movement types we have to consider.
Thanks,
Jwala

movement type 102 is for GR for PO reversal that is why the quantity is negative.

Material Master settings for Assembly Order

Hi,
I find an increasing tendency among many thread initiators not to respond to postings made by other forum members as solution / reposnse.
I do agree, man a response may not be giving you total solutions. But one must appreciate the fact that somebody has invested time and applied his / her knowledge to find a solution for the problem you have posted.
You are exercising a choice while deciding to repsond, or not to repond. The choice is rightfully yours.But in my opinion, lack of response from the initiator not only kills the vibrarncy of the forum, but ethically not correct also.
You may have differing views on this - let us hear.
With warm regards to everyone.
Muraleedharan.R

I agree with you Muraleedharan.
My personal thoughts to add:
To be honest, I'm loosing interest in forum and have become choosy (I look at posted by) in my reponses. Not to assume that I'm boasting and forum is going to lose for this but as Muralee says it going to kill the vibrancy of forum.
It's not always that the suggested solution solves problem but someone made an effort in responding to someone else's problem.
Points : Not everyone in the forum works/looks for points but seeing response (or closing the post) gives some satisfaction that sincere effort is also being spent on other side.
Now how can we sort?
Let's go back and respond to posts raised in past 10-15 days- as person who's created the post.
Respond that there's nothing more to add- as person who created the post or one who responed partially without resolving the issue( Sure I've few for self)
Cheers
Sreenivas

Availability quanity for Assembly order.. ??

Similar Messages

Maybe you are looking for