Available capacity in APO

Hi,
I have a resource for which the PLANNED DOWNTIME has been maintained as 12 hrs a day for next few months
On top of it, the FACTORY  SHUT DOWN (this has been picked from the fact cal) has been maintained in the CAPACITY PROFILE in APO
Logically speaking I should now see AVILABLE CAPACITY as 12 hrs  in the capacity profile in the Resource
But I see sometimes as 12 hrs and some times as 3 hrs in the capacity profile in the Resource
and in the planning book I am seing the available capacity as '0'
Kindly share your interpratation , how do I look into this issue to fix
Thanks,
SS
Edited by: SAPSriman on Dec 7, 2010 8:40 AM

Hi,
First check if the same resource in APO is maintained as external capacity or not.If the same is activated then check the resource capacity in ECC.Check the intervals and shifts.
If the same is not true then check the capacity profiles and the avalable capacity versions maintained in resource master in APO.
Since from factory calender resource blocking is only possible for at least a day so any availble hours is basically for resource blocking.
Check the shift sequence.If your shift sequence is cross period the 3 hours can be coming from previous period.
Hope the points can help you.
regards,
kaushik

Similar Messages

  • Standard available capacity Vs actual capacity used in W/C

    Hi Gurus
    Can some tell me the tcode for a report which will give me the "Standard available capacity Vs Actual capacity used" for a Work Center?
    regards
    HR

    HR,
    It is unclear to me how this report falls short of your requirements.
    CM01 displays  Capacity requirements (load), Capacity available, and percentage of requirements vs available.
    http://help.sap.com/erp2005_ehp_06/helpdata/EN/89/a41dd8461e11d182b50000e829fbfe/frameset.htm
    Other ways of evaluating the same data:  CM02, CM03, CM04, CM05, CM07, CM50.
    I suggest you work with the standard reports for a while before you consider changing them.  However, you can alter the standard cap evaluations in many ways.  Review
    http://help.sap.com/erp2005_ehp_06/helpdata/EN/91/dcac7377be11d183b30000e83235ee/frameset.htm
    Config starts at IMG > Production > CRP > Evaluation.  Work downward from there.
    Best Regards,
    DB49

  • Changing colour of Available capacity Line Graph in DIMSPPB_BARCHART_DEMO5

    Hi all experts,
    I am facing a problem in changing the colour of Available capacity Line Graph in program DIMSPPB_BARCHART_DEMO5. Currently it appears as a blue line. Can someone please help me in changing the colour of this graph to any colour I want.
    Thanks in advance,
    Mitrajit Debroy

  • Workforce planning- issue with available capacity

    Hi All,
    I have an issue in workforce planning. I have created a workcentre and have entered the required details in capacity tab to arrive at available capacity. The available capacity for this workcentre is visible in transaction CM01.
    I have done the workforce palnning using worcentre view in transaction CMP3, but for some reason I am unable to see the workcentre avaliabile capacity. I only see the distributed total requirements.
    Would appreciate any pointers on this.
    Regards
    Pradeesh

    Regarding the availablity of CMP3, it refers the availability of  assigned persons rather than the work centers.
    Please check the involved person with transaction PA30 using infotype 007
    (see details in consultant note 543362).
    Kind regards,
    Zhenbo

  • FM for checking Available Capacity of Work Center

    Dear All,
    I have trying to find a Function Module to get the latest available date of the Work Center (The Period where no Production Orders has been dispatched to it).  It is only when the Work Center is available then we can dispatch the Production Order's processes to its work center.
    Does anybody knows which Function Module or Table where I can get the latest available date for carrying out the Production Order dispatch process.  Any inputs would be appreciated.
    Thanks in advance.

    Dear
    Goto CM05/CM07-Select Work Centre Load or Work Centre Basic Load -Enter Work Centre or just give the Plant Code -Hit Standard Profile -It will display you weekly basis Work Centre Avaliable Capacity , Requirement , Load .
    It will give you a broad picture over an period -You can select any one the check box representing Weeks or you can change over in Monthly basis .For that you have select Planning -Profile -Option Profile -daily , Monthly , Weekly , yearsly
    If you are stick to FM : Help about available capacity
    Hope this will address you issue
    Regards
    JH
    Edited by: Jiaul Haque on Oct 11, 2010 10:17 AM

  • Available capacity

    Hi PP Experts,
    Can anybody please explain me,
    What is difference between Standard Available capacity,Available capacity & Pooled capacity.
    Please explain with giving simple example if possible.Don't define.Please helpout.
    Edited by: Raja S on Oct 17, 2008 8:11 AM

    Dear,
    We assign the Standard available capacity at capacity header (capacity view)of Workcenter (CR02).
    In the work centre - capacity header overview give the following data in std available capacity sub heading
    start :08:00:00
    Finish:12:00:00
    break:00:00:00
    Capacity utlization - 100
    No of ind capacity = 1
    Hence the capacity of 16 hrs is fixed for this WC. This your standard avilable capacity.
    OP37 Maintain Available Capacity Version
    You can use it as Normal available capacity or maxnium avilable capacity. The active version of available capacity is used as a basis for scheduling.
    Pooled capacity is nothing but an available capacity that can be used by several work centers.
    An example of a pooled capacity is a group of setup personnel who perform setups for many work centers.
    Pooled capacity
    A pooled capacity can be assigned to several work centers. It is created and edited independently of the work center. This is useful if, for instance, a group of employees works in several work centers.
    Capacities can be entered and changed in work centers, but also independently. The system distinguishes between.
    For working with CR11 ,I think first the pooled capacity should be included in SPRO.
    Just check out in SPRO-Production -BAsic Data-Work center-Capacity Planning-Define Capacity categories
    Hope clears to you.
    Regards,
    R.Brahmankar

  • Fields for Available capacity in SAP

    We are trying to generate Z report on Availabile capacity
    Under normal transaction : by going in CR03 we can have Start time / Finish Time based on which we get operating time in hours, we need to capture the Avaialble capacity we are not getting this field in any SAP table
    Max we go in KAKO by capacity ID of resource and get Start time, Finish Time , Breaktime in Seconds & % utilization  how do i convert this in Hours,i have tried various combinations but it does not matches in CR03
    Can anyone suggest how to convert this seconds or any other table from which i can get Availability Capacity in hrs

    Dear Bhavesh,
    Check this logic,
    Available Capacity = From table KAKO take the fields BEGZT(shift start), ENDZT(shift end) and PAUSE(break time),divide this
    value by 3600 and you will get it hours.
    For example if BEGZT - 25200,then 25200/3600 = 07:00:00 start time.
    ENDZT - 54000,then 54000/3600 = 15:00:00 end time.
    Check this logic a.capacity = {(BEGZT - ENDZT) - PAUSE}NGRADAGNOR /100
    Regards
    Mangalraj.S

  • Incorrect size & quantity of photos and available capacity

    Hi,
    Recently, I imported and subsequently deleted many photos on my iPad. There're only 17 photos left (and as indicated in "General" under Settings). However, under iTunes Summary, it shows a total of 678 photos on my iPad. More strangely,
    - iPad: the 17 photos add up to 4.68MB in size, with 8.7GB available in capacity;
    - iTunes: the 678 photos add up to 3.6GB, with 12.3GB free space.
    How do I locate the rest of the 661 (678-17) photos that iTunes detected? I want to get rid of these "hidden" files as they're eating up my free space. I did a restoration to my iPad but the size of the photos and available capacity are still not showing right.
    Please help~~ I would greatly appreciate any advice given. Thanks!!

    Welcome to the Apple Discussions. It appears to be a bug. Be sure to report it to Apple via http://www.apple.com/feedback/iphoto.html. I get varied results when selecting multiple events or photos, deselecting and then adding them back. iPhoto then tells me the disk is full even though I've not selected enough to fill it.
    But we have to remember that there's a lot of overhead when burning via the Share->Burn option. In addition to the original files we also get the thumbnail, modified and many database files. That adds up fast. It's just not clear what's happening.
    Even though you get those screwy numbers does the burned disk contain the correct number of photos?

  • CProjects - "Available Capacity" for resources

    Dear Experts,
    We are on cProjects 4.0, Support Pack 11.
    We have a requirement by which we use a four-day-per-week calendar. Also, this calendar is required to have some holidays which are specific to our business. And this works good in our calendar.
    However, we notice that the "Available Capacity" for resources (Under Resources > Staffing) does not caluclate the available hours based on this calendar. So to say, the available capacity for resources is calculated on the basis of some different calendar. We can make changes to the availability of a resource per day (from 8 to, say, 10 hours per day). But what we have not been able to do is to have the availablity calculated on the basis of the working days available in the project calendar.
    How can we do this?
    Summary
    How can we get the application to calculate "Available Capacity" for resources on the basis of a calendar of our liking and not the system's?
    Thanks in advance.
    Regards,
    Bittu

    Hi Vivek,
    This helped and you get 6 points!!
    I could make the settings as per your suggestion and see that the 'Available' capacity for resources is now governed by the 'factory calendar' and 'hours' per day that I specify.
    However, we have a requirement by which this 'Available Capapcity' may not be governed by the the same calendar for every resource. For e.g., resource R1 may have 'Available capacity' based on calendar C1 and Resource R2 may have an 'Available Capcity' based on calendar C2. How do I make allowance for this?
    What I mean is, the settings that I have done works good but the same rule applies to all the resources. Is there a way I can make one setting applicable to one resource and another setting applicable to another resource??
    Thanks in advance.
    Regards,
    Bittu.

  • Shift sequence in available capacity

    hi, all SAP experts,
      my question is as follows
    I created grouping in which shift sequences are defined and i assign this group to work center in capacity header. So work center should have to select shift sequence in capacity tab but i enter manually start time and finish time in capacity header.So why systm can't show interval of available capacity daywise automatically through grouping or is there any setting for this?
        thanks in advance
    i will look for points also
    regards
    Nitin Nerkar

    Dear,
    In work center change transaction capacity view
    assign this grouping no XX.
    Enter active version = 1
    Then Click on interval and shift push button (left top)
    follow the menu path Edit>insert>insert interval
    enter
    valid from and valid from field
    enter shift sequence and remove the data if there in any other filed and click on ENTER. all the days in week are defaulted with the shift seq you defined.
    It will work for you.
    Regards,
    R.Brahmankar

  • Rotating Off-Days in PM Work Center Available Capacity

    Good Day!
    Background:
    Each Maintenance person is represented by a PM Work Center.
    Maintenance person have a rotating off-days which cycle repeats after 21 days.
    Requirement:
    We want to reflect rotating off-days to PM Work Center Available Capacity.
    Options tried but did not worked;
    Shift Definition Grouping:   Off-days is in HR's Period Work Schedule but only Daily Work Schedule can be pulled into Shift Definition Grouping and then into Work Center
    Reference Available Capacity:   Can be achieved via Shift Sequence Key in interval of available capacity but needs to maintain for each week with on-going maintenance
    Do anyone has implemented this similar requirement that we can reapply/build on?
    Your valuable inputs are deeply appreciated.
    Thanks!

    In work center capacity header
    click   change intervals
    click   insert
    Enter manually
    valid from and valid to dates
    No of ind capacity - 0

  • SNP Resource available capacity variance

    Hi friends,
    need your help??
          I am using an SNP resource with capacity 500 min per day(Bucket). but after thew SNP run when i download the optimizer log data( Transaction:/SAPAPO/SNPOPLOG) the available capacity derived from the log is for the particular day is different than the actual capacity of the resource(i.e. it is less than the actual available capacity).
        How can be this issue resolved.??
    please revert back urgently

    Hi kiran ,
    Check for the following possible reasons :
    Try this resource in SNP Heuristic and check the capacity and do levelling.
    Check the Time zone and the calenders for this resource and plant.
    Check the overload % and min load % rounding & down times.
    See oss note 510339.
    Optimizer gives the results based on the settiing you have entered,and you will only be able to analyse it better .
    Regds // Digs...

  • CMP2 work force planning available capacity shows less

    In CMP2 workforce planning : The available capacity for a person (assigned to activity) shows 7.5 Hrs each day although Capacity for that one resours is 8 Hrs (=Operating time). There is only 1 capacity in the work center.
    Can some one give any idea why this descrepancy ?
    Thanks.

    Hi,
    Also check the formula used in the capacities tab of the workcenter.
    BR
    Anjali

  • 100GB HDD - 'Available' Capacity Issue

    Apple forgot to put a disclaimer about the available capacity issue on its 12 inch and 15 inch G4 powerbooks that come loaded with a 100 gig hard drive and 1 gig of ram. Check the outside of your box, it is not on there. I also have a imac G5 and it comes with this disclaimer, as does every other Apple computer. Thinking they solved the available capacity issue, I then opened the box, turned on the computer, went up to the blue apple in the upper left hand corner of the screen, clicked on about this mac, then clicked on more info, then went to the hard drive info, only to find, I had less capacity then I was led to believe I had purchased. Any one out there with this same issue?

    MIR --
    Thinking they solved the available capacity issue....
    There is no "available capacity issue" to be solved. The difference between the stated capacity of your 100GB hard drive and it's actual 93.13GB capacity is simply the result of how drives are marketed. See: http://en.wikipedia.org/wiki/Hard_disk (discussion under the heading "The Difference Between 'Marketing Capacity' and Actual Capacity").
    But you already know this, as that's what RD told you just earlier, and what others have told you on five separate occasions in response to your previous five posts on this exact same subject. See:
    http://discussions.apple.com/message.jspa?messageID=2031695#2031695
    http://discussions.apple.com/message.jspa?messageID=2031671#2031671
    http://discussions.apple.com/message.jspa?messageID=2031662#2031662
    http://discussions.apple.com/message.jspa?messageID=2031638#2031638
    http://discussions.apple.com/message.jspa?messageID=2031594#2031594
    Your question's been answered over and over; please stop this senseless clutter. Thanks.

  • Available Capacity in LTP

    Hi,
    During creation of a planning scenario during LTP, we have a facility of assigning the Available capacity versions.  Imagine, that a few versions have been defined with '01' as the active version and some Simulative what if scenrio versions.  This active version has been maintained in the relevant WC/Resource. 
    Now during the creation, I would like to assing one of the what if scenario available capacity version. But I am really not sure how the system is supposed to behave since this version is not attached to any capacities in the work centres.
    Now in case i would need to analyse the what if scenario capacities, what is it that needs to be done.
    I have tried digging in some of the SAP material but came up with nothing.
    Any pointers on how to use the Available capacity versions  and what settings needs to be done will be much appreciated.
    Regards
    Kiki

    1. SAP has given this facitliy so that we can do a simulation based on different capacities.
    2. For this first you have to maintain different version of capcity in the workcentre level
    3. in the workcentre in the capacity tab you can see version , so can create different version of capacity here .
    4. Later when you create a planning scenario then you can plan with different version and do simulation.
    kindly let me know if this resolves,else will explain in detail.
    reg

Maybe you are looking for