Available hierarchies from OLTP

hi,
i've used button "Available hierarchies from OLTP" in InfoPackage to load some hierarchies into the SAP BI. But the some of hierarchies i cannot find in this list.
How could i load full list of all hierarchies that is created in R3 system, cause only some of them are there now?
thanks a lot!

Which infoobject
I normally see this in CO hierarchies where the hierarchy which is not desginated as a top node hierarchy is not available on the OLTP list (correctly!)

Similar Messages

Refresh available hierarchies from oltp / mark as relevant for BW in abap

Hi All,
I can't solve this problem: I am loading hierarchies from R/3 to BW via infopackage. I created the solution to use one infopackage to load more than 300 hierarchies. But before I can do that I have to open an Infopackege, press the button "Refresh available hierarchies from oltp" and then mark relevant hierarchies for BW. 
Is it possible to do this in abap via function module / BAPI or somehow else? I'd like to implement the whole solution in process chain but I need to solve this before. 
Thank you, Karol 
P.S.: 10 points will be rewarded!

Hello Karol,
I am trying to implement the same, can you please forward me the process and the solution you implemented to resolve this.
It will be greatly appreciated.
Thanks
Dharma.

Automating "Available hierarchies from OLTP"

Hi Gurus !!!
I would like to automate the importing of hierarchies from R/3 via ABAP !!! Is it possible? More clearly: I want to do da same of button "Available hierarchies from OLTP" do when we click on it within the InfoPackage !!
Who will save my skin?!?! :-D !!
Regards

Which infoobject
I normally see this in CO hierarchies where the hierarchy which is not desginated as a top node hierarchy is not available on the OLTP list (correctly!)

Extraction of all available hierarchies from KDH3 in R/3 system

Hi,
As part of the cost center reporting, user wants to utilize the account group hierarchy which is available in R/3 using KDH3 transaction code.
It would be appreciated if you could provide some helpful information of how to pull the account group hierarchies into BW system.
Thanks,
Bobby.

Hi Paolo,
You gave me good idea of what I am supposed to do.
When I ran the ST05 on KDH3 and found that it is using class 0109 so I am assuming that I need to use the data source 0ACCOUNT_0109_HIER to pull the data into BW??
I am giving full points for your valuable response.
Thanks,
Bobby.

Infopackage hierarchy selection from OLTP is not saved when transported

I have created an infopackage in Development that is pulling an available hierarchy. I then transported Infopackage to QA, but the Hierarchy, although is available from OLTP, is not selected in InfoPackage. I created a copy of InfoPackage in the QA system and selected available hierarchy. It allows me to select hierarchy, save and execute. The issue I have is I need to transport the InfoPackage, created in DEV to all QA and Production systems. The InfoPackage is not retaining available hierarchy when being transported.

Hi,
Usually infopackage will not be transported but created in QA and production systems. If the infopackage is transported to QA, the pushbutton in infopackage Hierarchies in OLTP will bring the hiearachies available in the QA R/3 system. Appropiate hierachy can be selected and the same infopackage can be saved.
Regards,
Dinesh D

Error when importing CO Hierarchies from R/3 DEV to R/3 QAS

Dear SDN,
I am getting the following error when importing Cost center and cost element hierarchies from R/3 DEV to R/3 QAS...
Object OSOA 0COSTCENTER_0101_HIER has not yet been imported successfully
Object OSOA 0COSTELMNT_0102_HIER has not yet been imported successfully
Ended with Return code ===8...
But The two hierarchies were available in R/3 QAS and also i am able to utilise..
My doubt is if i transport these hierarchies from R/3 QAS to R/3 Production any major issues...
Now i want to test a data in BW DEV from R/3 Production data...
So, I am planning to transport These hierarchies from R/3 QAS to R/3 PROD...
Here we do not have BW QAS...So, getting data from R/3Production to BW DEV and testing...
After testing Directly use in BW Production...
So, Please suggest me why when importing these hierarchies errors occuring???
Help will be greatly appreciated with points...
Thanks in advance...

Hi Venkat,
Please go through the following threads...
Hierarchy Transports
Transporting cost center and profit center standard hierarchies
/community [original link is broken]://Transporting a hierarchy
Transport Hierarchy
Khaja

How to remove available downloads from the list

how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.

HT1725 When I click on a Movie I get the following "You have already purchased this item but it has not been downloaded. To download it, select Check For Available Downloads from the Store menu." Then get err = 11111

iTunes quit unexpectedly during the download of a movie. When I click on that movie now I get the following message: "You have already purchased this item but it has not been downloaded. To download it, select Check For Available Downloads from the Store menu."
I follow the instructions, but the download still doesn't resume - err = 11111
Any advice?

Yeah, I am going to blast my iPhone for the 4th time today and pray this goes away. I had 6 apps showing updates, the 6 badge icon shows on the App Store on my iPhone and, having run them all, the 6 apps have two copies each on my iPhone: one that is the old version of the app and will not run and the other is a faded version of the app with an empty progress bar on the icon. Click those and you get an error message about connecting to iTunes, etc. as described in the article I linked to above.
It gets stranger than this. If I install a completely NEW app, the 6 that are stuck mid-update heal themselves and appear with the new version only, however now completely different apps (Hold Em for instance - which I did not update and didn't need an update) will not launch "app name Cannot Launch" message comes up.
Agh!

Error While sending infopackages from OLTP to BI/urgent

Hi BW friends
im workin on production support and im new to it.while
running infopackage X ,it is throwing a error
error:While sending infopackages from OLTP to BI/urgent
In status tab it shows traingular yellow colour
and diagnosis says that No idocs could be sent to bi using rfc.
so if u know please reply me
Thank you
Amarnath k

while loading data into the target we got this message and the solution is do manual update for that.

How to Load Hierarchies from flatfile in BI7

Hello Gurus,
How to load Hierarchies from flat file in BI7
As when creating datasource in BI7,
IT GIVES FOLLOWING OPTIONS
TRANSCTION DATA
MASTER DATA TEXTS
MASTER DATA ATTRIBUTES...
ALL THESE WE BRING TO PSA LEVEL BY INFOPACKAGE AND SEND DATATARGET BY DTP...
But how about Hierarchies...
Looking for reply
Regards
Guru

Look at the below blog for step by step procedure :
Hierarchy Upload from Flat files
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm

HT1725 The files seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu.

While downloading apps from iTunes Store following error is repeatedly coming "The files seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu."? Please suggest any solution.

Contact itunes support.

Multiple Hierarchies from Single Dimension Table in OBIEE-11g?

Is it possible to have Multiple Hierarchies from Single Dimension Table in OBIEE-11g?
Like 1)Year-Qtr-Month-Weeks 2)Year-Month-Days

Hi,
or if your lowest level is the same like
Day->month->year->Total
Day->businessMonth->businessyear->Total
Then yes, it is.
Create the first, then you start to create the second by adding your top(business year) level on the same level as the one you have (year) both under your total.
Then when you would add your second base level, there is a special option for it, something like use other hierarchy level/shared level (sorry can't recall and does not have a connection right now) then you select your existing day level under your businessmonth level.
Hope this helps,
Regards,
D

How to create set hierarchies from FI SL.

Hi Experts,
How to create set hierarchies from FI SL. Could you please tell me
Step by step procedures or send to this mail id [email protected]
Thanks
Regards,
Sathis.J

Hi,
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
Hope This Helps.
Thanks,
Sankar M

How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

If you use the WCF-SQL adapter it is recommend that you set UseAmbientTransaction to true if you are changing data. I think this requires MSDTC to be enabled on the SQL server that you are changing the data on. (http://msdn.microsoft.com/en-us/library/dd787981.aspx)
I think that Availability groups does not support MSDTC. (http://msdn.microsoft.com/en-us/library/ms366279.aspx).
How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

Hi,
Yes, Availability groups doesn't support MSDTC. Please refer to the similar discusison which maybe helpfull:
http://dba.stackexchange.com/questions/47108/alwayson-ag-dtc-with-failover
http://stackoverflow.com/questions/17179221/msdtc-in-always-on-availability-groups

Design Fixed Assets Star Schema from OLTP DB

Hi,
Scope : Design Fixed Assets logical Star Schema for Demonstrate with OLTP tables
Our platform is Oracle 10g Forms and Reports deployed on Oracle 10g App Server._ At the moment we don’t have data warehouse constructed. We are pumping OLTP Data into Staging DB thru jobs and then by using materialized views getting the data in DWH DB which is in progress.
OBIEE 10g installed and working fine for testing.
We are planning to implement OBIEE for Reporting. As a starting point I would like to design Fixed Assets star schema to demonstrate FA reports in OBIEE from OLTP Tables.
FA- OLTP Tables:_
AC_UNIT_MASTR           – Business Units
AC_ACNT_MASTR           - Nominal Codes
AC_COST_CENTR_MASTR      - Departments
AC_MANTN_ASTS           - Assets transaction table
AC_AST_BAL_DETLS           – Period wise Asset summary
AC_AST_BAL_DETLS_V      - View
To achieve this
1).Import tables in physical layer and set physical joins
2).identify and create dimensions and set complex joins and then move to presentation layer.
Please suggest best approach to design Repository
Thanks
Regards,
Kulkarni
Edited by: hai_shailesh on Jan 25, 2012 11:36 PM
Edited by: hai_shailesh on Jan 25, 2012 11:38 PM
Edited by: hai_shailesh on Jan 25, 2012 11:39 PM

Hi Saichand,
Thanks for the response.
Already i referred that doc and completed practically. now i have to work on Finance data . as a starting point working with Fixed Assets module. already i designed centralised fact with dimensions as below
in physical&BMM layer defined relationship as below()
AC_UNIT_MASTR_D                  --> AC_AST_BAL_DETLS_F
AC_ACNT_YEAR_MASTR_D        --> AC_AST_BAL_DETLS_F
AC_ACNT_PERD_MASTR_D        --> AC_AST_BAL_DETLS_F
AC_COST_CENTR_MASTR_D      --> AC_AST_BAL_DETLS_F
AC_AST_GRP_MASTR_D            --> AC_AST_BAL_DETLS_F
AC_AST_SUBGRP_MASTR_D      --> AC_AST_BAL_DETLS_F
and
AC_ACNT_YEAR_MASTR_D        --> AC_ACNT_PERD_MASTR_D
When iam trying to create a dimension for Periods(AC_ACNT_PERD_MASTR) , Periods dimesnion created with two tables
AC_ACNT_YEAR_MASTR_D,AC_ACNT_PERD_MASTR_D
Please advice..
Regards,
Kulkarni

Available hierarchies from OLTP

Similar Messages

Maybe you are looking for