Available Input Problems...
I am currently running logic express 7 with a motu 828MkII Firewire interface with a Behringer ADA8000 running through the interface. However the extra digital inputs that the behringer provides can be seen on the drag down input selection menu but cannot be selected as they are faded out. In garage band and the various other audio packages I use these extra inputs (shown as inputs 13-24) are available to use but they still will not work in logic, leaving me to conclude that the issue lies within logic, I have spent many hours now trying to solve this problem but have got no where. If any one has a possible solution to this problem or knows anything about it I would be very grateful if you could reply to this post.
Thanks
Jimi
Logic Express is limited to the first 12 inputs available. I think a workaround is to setup a template in GarageBand with the inputs you want and then, open that file in Logic.
Similar Messages
-
Acroread 8.x CJK input problem
See also https://bugzilla.novell.com/show_bug.cgi?id=353251
CJK input doesnt work right in the English version of
acroead 8.1.1 or the pre-release version 8.1.2.
First of all, one needs to set
export GTK_IM_MODULE=xim
to make acroread react at all to the hotkey which triggers
SCIM input (default hotkeys on openSUSE are Shift+Space and Control+Space).
When GTK_IM_MODULE=scim or GTK_IM_MODULE=scim-bridge, acroread
wont react to the hotkey which enables SCIM at all.
With GTK_IM_MODULE=xim, the scim input method *can* be
enabled by Shift+Space. But it doesnt work right.
One can see correct Japanese in the popups shown by scim when
converting phonetics to Chinese characters. But the predit string
shows garbage which seems to resemble Arabic. And after comitting
everything typed is converted to question marks (acroread 8.1.1)
or boxes (acroread 8.1.2).
I am talking about the *English* versions of acroread here, not
localized Japanese versions like e.g.
ftp://ftp.adobe.com/pub/adobe/reader/unix/8.x/8.1.1/jpn
As it is not nice to have completely packages for each language, I
hope that the different language versions can be merged into one in
the long run.
It would be very nice if there were only one basic version and to
support other languages one only had to add fonts and translations and
not exchange the binaries.Some more comments from: https://bugzilla.novell.com/show_bug.cgi?id=353251
------- Comment #5 From Gaurav Jain 2008-01-11 10:48:18 MST -------
[ ] Private
Mike,
Could you confirm if everything is working fine with the Japanese Reader
downloaded from the Reader website? That'll be really strange since the Viewer
binaries should be identical in the English and Japanese versions. The only
difference in the 2 installers should be in the fonts and the resource
libraries.
-vc
------- Comment #6 From Mike Fabian 2008-01-11 19:43:16 MST -------
[ ] Private
OK, I tried with the special Japanese version of acroread (8.1.1)
as well.
There is no difference in behaviour between the Japanese acroread
8.1.1 and the English acroread 8.1.1 and the English acroread 8.1.1 as
far as the input problem reported here is concerned! All of them show
the problem as reported here.
But I found that it depends on the locale. If acroead is started
in ja_JP.UTF-8 locale
LANG=ja_JP.UTF-8 acroread
the problem occurs as reported here.
However, if acroread is started in ja_JP.eucJP locale
LANG=ja_JP.eucJP acroread
the Japanese input works fine! Thats the same with the Japanese and
the English version of acroread.
As UTF-8 locales are the default nowadays on most Linux distributions,
it is important that this works not only in legacy locales like
ja_JP.eucJP but also in ja_JP.UTF-8.
------- Comment #7 From Gaurav Jain 2008-01-13 09:25:27 MST -------
[ ] Private
The screen-shot seems to indicate you are trying to enter japanese characters
in a standard GTK+ edit field. The core Reader code actually doesn't interact
much with the control during the process of entry of text.
Could you try the following -
1. When the default locale is eucJP, what happens in a standard edit field in
some other GTK+ app., for instance gtk-demo? If you don't have gtk-demo, you
could even try the same thing in the Open dialog in the Adobe Reader, where you
type the file name.
2. If you don't export GTK_IM_MODULE=xim, can you make the IME appear in some
other GTK+ app. like the gtk-demo?
My guess is this (atleast point 1 above) may be a problem with GTK+, though we
are investigating this at our end as well. Maybe an issue with the fonts that
get loaded when the locale is UTF-8, vs eucJP. That's the reason, the
characters loaded from the IME are showing as question marks.
-vc
------- Comment #8 From Mike Fabian 2008-01-14 05:18:46 MST -------
[ ] Private
Gaurav Jain> 1. When the default locale is eucJP, what happens in a
Gaurav Jain> standard edit field in some other GTK+ app., for instance
Gaurav Jain> gtk-demo?
In gtk-demo, Japanese input works both for ja_JP.eucJP locale
*and* for ja_JP.UTF-8 locale.
And it works for all values of GTK_IM_MODULE which I tried
(GTK_IM_MODULE=xim, GTK_IM_MODULE=scim, and GTK_IM_MODULE=scim-bridge.
Gaurav Jain> If you don't have gtk-demo, you could even try
Gaurav Jain> the same thing in the Open dialog in the Adobe Reader,
Gaurav Jain> where you type the file name.
Japanese input in the Open dialog of the Adobe Reader behaves
exactly like in the search field of the Adobe Reader:
- works fine in ja_JP.eucJP locale
(for all values of GTK_IM_MODULE)
- does not work in ja_JP.UTF-8 locale
(not for any of the above mentioned values of GTK_IM_MODULE)
Gaurav Jain> 2. If you don't export GTK_IM_MODULE=xim, can you make
Gaurav Jain> the IME appear in some other GTK+ app. like the gtk-demo?
In gtk-demo the IME appears and works fine.
In acroread, the IME appears for all values of GTK_IM_MODULE (xim,
scim, scim-bridge) and input works fine in ja_JP.eucJP locale. In
ja_JP.UTF-8 locale, the IME appears as well and input seems to be
possible but the result is garbage as in my screen shot.
------- Comment #9 From Gaurav Jain 2008-01-22 04:06:32 MST -------
[ ] Private
Hello Mike,
I tried reproducing the bug on SLED 10, openSUSE 10.3, and openSUSE
11.0(http://download.opensuse.org/distribution/11.0-Alpha1/iso/cd/openSUSE-11.0-Alpha1-GNO ME-i386.iso)
but was unable to do so.I could see no difference in the behavior based on
locale.Also,the problem of garbage predit strings in case of utf8 is not
reproducible at my end.
Could you please attach a screenshot of your SCIM setup settings,and the
download location of openSUSE 11.0.
Regards,
Sanika
------- Comment #10 From Mike Fabian 2008-01-23 10:48:40 MST -------
[ ] Private
I found that the problem occurs *only* with GTK_IM_MODULE=xim,
contrary to what I wrote in comment #8.
That was my fault, because I still had
# Workaround for http://rudin.suse.de:8888/show_bug.cgi?id=85416
# (see comment #37):
export GTK_IM_MODULE=xim
patched into the beginn of the acroread start-script.
Apparently this is not needed anymore, input using
GTK_IM_MODULE=scim and GTK_IM_MODULE=scim-bridge seems to
work fine now in acroread 8.1.2.
*But* the problem I described here occurs with GTK_IM_MODULE=xim.
Sanika,
can you reproduce the problem with GTK_IM_MODULE=xim ? -
iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?
Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
That sounds like the probable cause you cannot add contacts.
Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps). Also contacts sync has nothing to do with iCloud behavior. The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere. Specific syncs are not relevant. -
I was told to Trash Iphoto and reinstall it to remedy a "no available themes" problem. If I do that will I lose all my photos?
Have you tried to rebuild or repair your iphoto library or database? http://support.apple.com/kb/HT2638
If you reinstall as long as you don't delete your iphoto library you'll be fine. You'll probably have to tell the new iPhoto which library to use after you reinstall though. Hold the option key down when starting iPhoto and select your library. Also just to be safe I would back up the iPhoto library BEFORE you do anything. -
Solution for terminal input problem
(my english is bad, sorry)
Hi, this thread is for programmers who like console applications (ncurses based).
As you all know, terminal emulators have a big problem with user input. Their input system is good for CLI, but really sucks when using full screen applications like vim, emacs, mc, ncmpc, htop, rtorrent, irssi (I mean all ncurses based or slang based which use cursor movement). Examples of this problem:
- Ctrl-L and Ctrl-Shift-L generate the same single byte in the terminal; namely 0x0c. They are indistinct.
- Ctrl-I and Tab generate the same single byte in the terminal; namely 0x09. They are indistinct.
- UTF-8, Alt+letter, Esc-letter all generate the same bytes in the terminal. E.g. é vs. Alt+C Alt+) vs. Esc C Esc )
But there is no simple and nice solution. Problems cannot be solved without fixing the terminal itself and without breaking some backward compatibility. But I think a lot of console-addicted programmers want to solve them.
So, here is my way of solving this problem.
http://nsf.110mb.com/termbox/termbox-concept.html
The main idea is to add a new terminal mode called "RAW input". This mode will send special events almost directly from X11 to console application.
On this page I introduced a simple demo application and an rxvt-unicode-9.02 patch.
In this version of my hack, echoing in terminal is broken. You can't enable echo with this new mode yet. But I can solve this too.
It is simple and needs a little bit more hacking of terminal. Terminal should start all input messages with unique escape sequence and when it receives echo of these messages, it should ignore them. But also terminal should send these input messages *with* usual symbols, so they can be echoed.
So I want to know what do you think about all this.shining wrote:
nsf wrote:So I want to know what do you think about all this.
I think that you might want to find a more specialized place to get more valuable feedbacks. But also that I never noticed these input problems so it has never bothered me
Yes, I think I should try usenet news groups
These input problems are not so big deal, but when you want to use your keyboard at maximum, they kick your ass
I discovered this problem when I was working on ncurses minimalistic replacement. But in the net there are talks about this too.
Here for example: http://www.nabble.com/Improve-vim%27s-k … 34943.html
Last edited by nsf (2008-06-16 07:06:37) -
Japanese text input problem.
I created a small swing application which has a JTextField. I changed my keyboard input to Japanese(Hiragana) and entered some characters(. ,). They are coming as center aligned (But, they are coming as bottom aligned in notepad.). And I could confirm that the ideal alignment of them will be bottom. Could anyone help me?
Note: I don't see the same problem if I set the font type to MS-Gothic or MS-Mincho. Is that the only option available.Sounds like your app is using a Traditional Chinese font because the app is running in a non-Japanese locale. Try running your app in Japanese locale, then it will use the correct font.
HTH,
Naoto -
Availability check Problem in sales order according MRP sterategy
hi,
We are using strategy 56 for configurable final product and strategy 65
for its variants.Requirement type is "ELV V". According this requirement type,
it is not possible to confirm availability check and then deliver the
sales order. We tried to mark availability check for requirement type ELV V in OVZG Tcode, but the
following error came up: "Check against plan material can only be carried
out w/o avail.check". Is there any setting to handle this problem to work
with strategies 56 and 65? Is it some configuration that we forgot?
Thanks,Yes, We have maintained planned del. time. and other fields also,
My problem is that, To make assembly of material A we have two component material B and C.
in the sales order of material A, system should check availability of component material B and C.
please help
vikas -
Availability check problem in sales order
Hi All,
We have one material which is assembled by using two components (BOM).
During avaiability check in sales order system should check components stock available in Stores.
· If there is sufficient stock of the component materials is available, the availability check should report a fixed number of days to make assembly,
· If there is insufficient stock of the component materials, the availability check should report the longest lead time for the material which is short + fixed number of days to assembly.
Please help
VikasYes, We have maintained planned del. time. and other fields also,
My problem is that, To make assembly of material A we have two component material B and C.
in the sales order of material A, system should check availability of component material B and C.
please help
vikas -
In sales order availability check problem
Hi
In sales order I when I enter the material availability happening.........
ex. My material 00001 I raised the order for 100 quantity on 01.04.2009 on that time system showing availability of stock only 50 quantity available....on 02.04.2009 I posted 200 stock through transfers....Total my stock is 250 quantity as on 02.04.2009 . When i am doing delivery on 02.04.2009 only 50 quantity copying to delivery for the material 00001.
no reservations are there.....02 availability check is there in my material master..
if i come sales order if i go to 00001 material line item schedulines if i change the date..manually then only system updating 100 quantity in sales order................
why its happening...........in sales order 100 line items are there .if i do delivery some line items only quantity copying.its very difficult to remember which item is copied to delivery...........
Any suggetions please.......
Thanks
SreeDear Sree sree
sales order is created for 100 units and stocks are there for only for 50 units on 01.04.2009 so the confirmed qty is given as 50 only on saving the sales order
On 02.04.2009 there are some stocks flowing in your plant /storage locations so on 02.04.2009 the qty becomes 250
Now on 03.04.2009 the sales order is due for delivery but in delivery only 50 units has come eventhough there are 250 units stocks
This is your problem
The system response is very correct
If you want the system to confirm 100 units on 03.04.2009 this wont happen automatically
You have to put the order in VA02 mode and redo the availability check
By doing that the system will confirm the stocks for 100 units
If your OVZ9 availability check control screen is configured properly then while creating the sales order itself these incoming stocks of 200 units can be taken into account so that the order 100 can be confirmed in VA01 itself
If your checking group is 02 in MMR then in OVZ9 for the combination of 02 and A (sales order) you can control these
Go to OVz9 and press F1 in each and every check box
You will understand it much better
Regards
Raja -
Dear all,
I am uploading the bank statements using manual bank statements through Z transaction, Once uploaded system is generating the batch input session for the same.
When i run the batch input session system not clearing outgoing payment automatically based on the assignment field, as i have alreday mentioned the same assignment while posting the document and in the excel file.
I am getting the following message while running the batch input session.
No batch input data for screen SAPDF05X 3100
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Please let me know solution for the same.
Regards,
AnandHi,
This may not be a solution but may help you to isolate the problem
a) Are you able to load the bank statement for other banks without error ?
b) Try for the same bank in a different system .
c) If it is working for different bank then check the file format is the same for both the banks.
d) If it is working in different system check the ABAP code for any changes between the system,
e) Are you getting this message for all the line items or only for some line items ?
Regards
K.R -
Mouse & keyboard input problem.
Hello there.
I have recently started using a Mac Mini for music live performance.
I am using programs like Ableton Live & Apple's MainStage.
I am experiencing problems with the input coming from the mouse and keyboard. After startup everything works perfectly fine. I am using Apple's Magic Mouse and Apple's wireless bluetooth keyboard now, but I have also experienced the same with a simple cheap usb mouse.
Let me explain, what happens:
From time to time, the input coming from both the keyboard and the mouse stops. The keyboards is not responding at all. The mouse can move the coursor around, but the buttons are not responding. When I for example move the coursor on an icon in the dock, the name does not pop up, as it would do normally.
From that point my rescue is a restart (hard one) or a screen sharing login from another mac on the network to do a normal restart.
Is anyone experiencing something similar? Any tips to help me out?We are running Ableton Live for running backtracks.
Here is the part of the log. There is more log about the system startup, if needed.
18/06/14 16:27:54,000
kernel[0]
Sandbox: ntpd(375) deny file-read-data /private/var/run/resolv.conf
18/06/14 16:27:54,000
kernel[0]
Sandbox: ntpd(375) deny file-read-data /private/var/run/resolv.conf
18/06/14 16:33:05,371
WindowServer[103]
Warning: Program "Live" posted a mouse-down, blocking hardware events, but did no further mouse activity
18/06/14 16:35:17,000
kernel[0]
[AppleMultitouchDevice::willTerminate] entered
18/06/14 16:35:17,000
kernel[0]
[AppleMultitouchDevice::stop] entered
18/06/14 16:35:17,000
kernel[0]
[0xffffff8018afd600][free]()
18/06/14 16:35:17,804
loginwindow[68]
Preferred Localizations total: 1 contents ( English )
18/06/14 16:35:24,412
WindowServer[103]
Warning: Program "Live" posted a mouse-down, blocking hardware events, but did no further mouse activity
18/06/14 16:35:24,428
WindowServer[103]
Warning: Program "Live" posted a mouse-down, blocking hardware events, but did no further mouse activity
18/06/14 16:35:59,916
digest-service[514]
label: default
18/06/14 16:35:59,916
digest-service[514]
dbname: od:/Local/Default
18/06/14 16:35:59,916
digest-service[514]
mkey_file: /var/db/krb5kdc/m-key
18/06/14 16:35:59,916
digest-service[514]
acl_file: /var/db/krb5kdc/kadmind.acl
18/06/14 16:35:59,917
digest-service[514]
digest-request: uid=0
18/06/14 16:35:59,918
digest-service[514]
digest-request: netr probe 0
18/06/14 16:35:59,919
digest-service[514]
digest-request: init request
18/06/14 16:35:59,922
digest-service[514]
digest-request: init return domain: DUNES-MAC-MINI server: DUNES-MAC-MINI indomain was: <NULL>
18/06/14 16:36:00,010
digest-service[514]
digest-request: uid=0
18/06/14 16:36:00,010
digest-service[514]
digest-request: init request
18/06/14 16:36:00,013
digest-service[514]
digest-request: init return domain: DUNES-MAC-MINI server: DUNES-MAC-MINI indomain was: <NULL>
18/06/14 16:36:00,175
digest-service[514]
digest-request: uid=0
18/06/14 16:36:00,175
digest-service[514]
digest-request: init request
18/06/14 16:36:00,178
digest-service[514]
digest-request: init return domain: DUNES-MAC-MINI server: DUNES-MAC-MINI indomain was: <NULL>
18/06/14 16:36:00,204
digest-service[514]
digest-request: uid=0
18/06/14 16:36:00,204
digest-service[514]
digest-request: init request
18/06/14 16:36:00,207
digest-service[514]
digest-request: init return domain: DUNES-MAC-MINI server: DUNES-MAC-MINI indomain was: <NULL>
18/06/14 16:36:00,210
digest-service[514]
digest-request: uid=0
18/06/14 16:36:00,212
digest-service[514]
digest-request: od failed with 2 proto=ntlmv2
18/06/14 16:36:00,212
digest-service[514]
digest-request: user=\GUEST
18/06/14 16:36:00,215
digest-service[514]
digest-request: kdc failed with -1765328234 proto=unknown
18/06/14 16:36:00,215
digest-service[514]
digest-request guest: ok user=DUNES-MAC-MINI\GUEST proto=ntlmv2 flags: NEG_KEYEX, ENC_128, NEG_VERSION, NEG_TARGET_INFO, NEG_NTLM2, NEG_NTLM, NEG_TARGET, NEG_UNICODE
18/06/14 16:36:01,567
kdc[72]
Got a canonicalize request for a LKDC realm from 192.168.1.101:51637
18/06/14 16:36:01,567
kdc[72]
LKDC referral to the real LKDC realm name
18/06/14 16:36:01,570
kdc[72]
BUG in libdispatch client: kevent[EVFILT_READ] delete: "Bad file descriptor" - 0x9
18/06/14 16:36:01,698
kdc[72]
AS-REQ dune@LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1 from 192.168.1.101:51638 for krbtgt/LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1@LKDC:SHA1.D06C7456A29 43F6790428F4FC70E766BF0D80FB1
18/06/14 16:36:01,702
kdc[72]
AS-REQ dune@LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1 from 192.168.1.101:51638 for krbtgt/LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1@LKDC:SHA1.D06C7456A29 43F6790428F4FC70E766BF0D80FB1
18/06/14 16:36:01,703
kdc[72]
Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
18/06/14 16:36:01,713
kdc[72]
AS-REQ dune@LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1 from 192.168.1.101:51639 for krbtgt/LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1@LKDC:SHA1.D06C7456A29 43F6790428F4FC70E766BF0D80FB1
18/06/14 16:36:01,717
kdc[72]
AS-REQ dune@LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1 from 192.168.1.101:51639 for krbtgt/LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1@LKDC:SHA1.D06C7456A29 43F6790428F4FC70E766BF0D80FB1
18/06/14 16:36:01,718
kdc[72]
Client sent patypes: ENC-TS
18/06/14 16:36:01,718
kdc[72]
ENC-TS pre-authentication succeeded -- dune@LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1
18/06/14 16:36:01,719
kdc[72]
Client supported enctypes: aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, arcfour-hmac-md5, using aes256-cts-hmac-sha1-96/aes256-cts-hmac-sha1-96
18/06/14 16:36:01,719
kdc[72]
Requested flags: canonicalize
18/06/14 16:36:01,867
kdc[72]
TGS-REQ dune@LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1 from 192.168.1.101:51640 for vnc/LKDC:SHA1.D06C7456A2943F6790428F4FC70E766BF0D80FB1@LKDC:SHA1.D06C7456A2943F 6790428F4FC70E766BF0D80FB1 [canonicalize]
18/06/14 16:36:01,887
screensharingd[516]
Authentication: SUCCEEDED :: User Name: dune :: Viewer Address: 192.168.1.101 :: Type: Kerberos
18/06/14 16:36:27,000
kernel[0]
Sandbox: ntpd(375) deny file-read-data /private/var/run/resolv.conf
18/06/14 16:36:27,000
kernel[0]
Sandbox: ntpd(375) deny file-read-data /private/var/run/resolv.conf
18/06/14 16:36:29,000
kernel[0]
[BNBMouseDevice::init][80.14] init is complete
18/06/14 16:36:29,000
kernel[0]
[BNBMouseDevice::handleStart][80.14] returning 1
18/06/14 16:36:29,000
kernel[0]
[AppleMultitouchHIDEventDriver::start] entered
18/06/14 16:36:29,883
loginwindow[68]
Preferred Localizations total: 1 contents (
English
18/06/14 16:36:30,000
kernel[0]
[AppleMultitouchDevice::start] entered
18/06/14 16:37:08,196
WindowServer[103]
Warning: Program "Live" posted a mouse-down, blocking hardware events, but did no further mouse activity
18/06/14 16:37:18,214
Console[524]
setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
18/06/14 16:39:41,000
kernel[0]
process ScreensharingAge[517] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
18/06/14 16:39:59,731
com.apple.IconServicesAgent[249]
main Failed to composit image for binding VariantBinding [0x3b1] flags: 0x8 binding: FileInfoBinding [0x2bb] - extension: log, UTI: com.apple.log, fileType: ????.
18/06/14 16:39:59,732
quicklookd[521]
Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: log, UTI: com.apple.log, fileType: ???? request size:48 scale: 1
18/06/14 16:41:13,236
MainStage[448]
NIAUCocoaApplicationEvents: unregistration (0x3bdf2ca0)
18/06/14 16:41:15,842
WindowServer[103]
_CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
18/06/14 16:41:15,849
WindowServer[103]
_CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
18/06/14 16:41:27,386
com.apple.SecurityServer[15]
Session 100017 created
18/06/14 16:41:27,403
com.apple.SecurityServer[15]
Killing auth hosts
18/06/14 16:41:27,403
com.apple.SecurityServer[15]
Session 100016 destroyed
18/06/14 16:41:27,544
com.apple.IconServicesAgent[249]
main Failed to composit image for binding VariantBinding [0x3b3] flags: 0x8 binding: FileInfoBinding [0x4b3] - extension: caf, UTI: com.apple.coreaudio-format, fileType: ????.
18/06/14 16:41:27,544
quicklookd[521]
Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: caf, UTI: com.apple.coreaudio-format, fileType: ???? request size:16 scale: 1
18/06/14 16:41:28,451
Console[547]
setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
18/06/14 16:41:41,991
Console[547]
Marker - 18 Jun 2014 16:41:41
18/06/14 16:41:44,520
Console[547]
Marker - 18 Jun 2014 16:41:44
18/06/14 16:42:05,640
com.apple.launchd.peruser.501[174]
(com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 9 seconds
18/06/14 16:42:05,689
WindowServer[103]
CGXGetConnectionProperty: Invalid connection 49155
18/06/14 16:42:05,690
WindowServer[103]
CGXGetConnectionProperty: Invalid connection 49155
18/06/14 16:42:05,690
WindowServer[103]
CGXGetConnectionProperty: Invalid connection 49155
18/06/14 16:42:05,690
WindowServer[103]
CGXGetConnectionProperty: Invalid connection 49155
18/06/14 16:42:05,690
WindowServer[103]
CGXGetConnectionProperty: Invalid connection 49155
18/06/14 16:42:05,705
com.apple.launchd.peruser.501[174]
(com.apple.universalaccessAuthWarn[280]) Exited: Killed: 9
18/06/14 16:42:05,705
com.apple.launchd.peruser.501[174]
(com.apple.AirPlayUIAgent[316]) Exited: Killed: 9
18/06/14 16:42:05,707
com.apple.launchd[1]
(com.apple.ShareKitHelper[255]) Exited: Killed: 9
18/06/14 16:42:05,709
com.apple.launchd[1]
(com.apple.internetaccounts[246]) Exited: Killed: 9
18/06/14 16:42:05,722
com.apple.launchd.peruser.501[174]
([0x0-0x1b01b].com.apple.AppleSpell[305]) Exited: Killed: 9
18/06/14 16:42:05,723
com.apple.launchd.peruser.501[174]
(com.apple.gamed[215]) Exited: Killed: 9
18/06/14 16:42:15,741
loginwindow[68]
ERROR | -[ApplicationManager quitPrivateProcesses] | Private process did not quit
18/06/14 16:42:15,773
sessionlogoutd[560]
sessionlogoutd Launched
18/06/14 16:42:15,779
sessionlogoutd[560]
DEAD_PROCESS: 68 console
18/06/14 16:42:15,807
airportd[90]
_doAutoJoin: Already associated to “DuneLive2014”. Bailing on auto-join.
18/06/14 16:42:15,812
shutdown[561]
reboot by _softwareupdate:
18/06/14 16:42:15,813
shutdown[561]
SHUTDOWN_TIME: 1403102535 812435 -
Newbie here having input problems
Hi, I'm still very new to Java and I'm basically learning it on my own right now. I think my current problem is with the way I'm reading in the input. Since my entire program right now is over 100 lines, I'll only post how I'm reading input in, and how I'm trying to use the input to continue program execution so that I can verify first if my input is correct before I move on to posting snippets of my program. Here's what I'm trying to do:
//Begin code here
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String cmd="";
while(//condition)
//Print out input options here
//Read input here
cmd = in.readLine();
cmd.trim();
if((cmd == "A') || (cmd == "a"))
//Process
else if((cmd == "S") || (cmd == "s"))
//Process
else if((cmd == "B") || (cmd == "b"))
//Process
else
System.out.println("Command not recongnized");
}Based on that code above, is the input reading being done correctly? That's the idea of what I'm trying to do in my program, yet it always just says that it doesn't recognize the command. If need be I will start to post more of my code if this example is not sufficient enough. I'm sorry if this is another one of those cookie cutter answer questions, I've just become somewhat frustrated in the last few hours of trying to figure out why my program isn't working. Thank you for any help you may be able to provide.Shoot, sorry didn't read over my post before posting as I should have. The snippet:
if((cmd == "A') || (cmd == "a"))
//Process
}Should read:
if((cmd == "A") || (cmd == "a"))
//Process
Sorry about that. -
Foreign language input problem
Hi,
I was using the "ITABC" that goes with Mac OSX to input Chinese.
It worked pretty well until a few days ago. Now I cannot input Chinese into my computer anymore. Is there a way out?
Thank you very much!. Now I cannot input Chinese into my computer anymore. Is there a way out?
Could you explain what happens when you try to do that in more detail? Does it affect all apps?
Try creating a new user and see if you have the same problem when logged into that.
Another place you can ask is
http://groups.google.com/group/chinesemac/ -
Hi,
My problems have had me gone frustrated before I update to Yosemite.
First, when I'm using Chinese input, the first alphabet key isn't registered if I only tap click the input field. However, if I physically click the input field, it doesn't seem to be a problem.
Secondly, while typing Chinese on Safari, half way changing the language from Chinese to English causing the keyboard not working to any further typing nor deleting typed word, but only highlight the typed word and re-type again can solve the problem in typing.
Also, the Chinese bar display disorientatedly on screen.
After updated to Yosemite, my macbook is getting more sluggish than before.
Technical support in Malaysia is not satisfied. Problems still persist although I sent for software repair and update. Truly helpless
Anyone could help?Problem like this has happened before updating to yosemite.
Is it because of bugs? -
Database Adapter calling stored procedure with xmlDOM.DOMNODE input problem
Hi all,
I have been asked to do a POC on using SOA suite to generate a web-service for several database stored procedure. A few of them can be done without a fuss. But I am now stuck with a stored procedure that has input and output as xmlDOM.DOMNODE type.
The stored procedure is very simple as below:
procedure prc_accinquiry(request in xmlDOM.DOMNODE, response out xmlDOM.DOMNODE) is
begin
response := request;
end prc_accinquiry;
I get the following error
Error while writing wsdl file C:/JDeveloper/mywork/ABSPOC/NetBanking/DomNodeTestDB.wsdl. Exception: WSDLException: faultCode=OTHER_ERROR: The wrapper procedure, PACK_TESTING$PRC_ACCINQUIRY, could not be found in the package, BPEL_DOMNODETESTDB, for the schema, MBTT
Did I do something wrong? or DOMNODE is not part of supported datatype for DB Adapter stored procedure call from JDeveloper?
The environment is SOA suite 11g 11.1.1.5 with Database 11 XE
Thank you in advance,
Jomphop
Edited by: e-Teoy on 15/12/2011 19:49This problem can be resolved by granting execute permission on the object type to the caller. For example, if the stored procedure is in schema1 and the object type is in schema2 then you would connect as schema2 and execute
SQL> grant execute on <object type> to schema1
Referencing object types defined in other schemas is documented. This is the described method for accessing object types in other schemas.
Maybe you are looking for
-
HP LASERJET PRO 200 MFP M276NW - Can't scan to Network Folder
Hi there, The scan to email works but not the scan to Network Folder. I have tried a lot of things but I give up. I have given permissions to all and after share a folder it appears as shared... but does not work. The OS is Windows 7. Hope you can
-
Information in PSA for 0IMFA_1 is missing in infocube
Hello everyone, I've loaded all the necessary data for 0IMFA_1 through all the nessesary infosources via PSA's, also i've preloaded the 0im_fa_ip_8, 0im_fa_ip_9, and 0im_fa_iq_9 (0im_fa_ip_7 is not required). Information that i see coming for Budget-
-
Cleaning up duplicates in iTunes library
I just moved my iTunes folder 'offshore' to an external HD to which my MB Pro connects wifi via an Airport Extreme. It's working fine however when it copied over it made a bunch of duplicates. My question is this; is there an automated way to rid my
-
Trouble installing hp photosmart printer
Having trouble installing a new hp photosmart c4680 on my ibook g4 running 10.4.11. Computer doesn't recognize the printer is connected. Used the install disk without success. Downloaded drivers from hp website without success. Any suggestions?
-
After a 10.0.3 my PSD images are not recognized ?
I installed the update 10.0.3 because I really need the new incrustation fonction in my project. But I used a lot of PSD images in it , who were perfectly recognized in the 10.0.2. But after the upgrade all my files PSD were not recognized and a big