Available memory not correct shown in SCVMM 2008

When looking in Hosts to see al my clustered host machines, the available memory for each host is 0 KB. I can create new virtual machines because there is enough memory but it is incorrect reported.
Has anyone an idea to resolve this issue?
The configuration:
4*HP BL460c with 16 GB memory attached to a SAN
Failover clustered
One SCVMM server with 4 GB memory

Are your Hosts running server core ? We have seen WMI counters which VMM uses for available memory having issues more often on server core.
Anyways, if you haven't done already, then these two QFEs(KBs) might need to be installed in the system.
KB958124 A wmiprvse.exe process may leak memory when a WMI notification query is used heavily on a Windows Server 2008-based or Windows Vista-based computer
KB954563 Memory corruption may occur with the Windows Management Instrumentation (WMI) service on a computer that is running Windows Server 2008 or Windows Vista Service Pack 1
-- ChetanG
-- This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all.

Similar Messages

IPad available memory NOT consistent with available memory shown in iTunes and available memory reduced after a connected sync...doesn't make sense.

I was looking through my pictures on iPhoto on my iPad 2 and noticed in some of my albums there were duplicate pictures, but on iPhoto on my iMac there wasn't. I had also noticed that my 64GB iPad 2 had only a little over 14GB left for available memory. I decided to connect my iPad2 to my iMac and sync it with itunes but this time I unchecked Sync Photos. I was asked to remove photos which I agreed to. My intnet was to re-install my photos in hopes that I would no longer see the duplicate photos and quite possibly free up some memory. In short, none of that worked and instead the pictures remained on my iPad2 and my available memory jumped to 956MB. I then tried selecting a " Selected Events, Faces, Albums..." in the Photo section of iTunes but I did not select any albums or events or faces. The sync ended and I still had all of the pictures on my iPad2 with 7GB left of available memory showing on my iPad2 but now showing 12GB on my iTunes on the iMac.
I then tried to do a sync again, syncing all photos and the sync cancelled. I tried it again and it went through. This sync ended with 14GB of available memory showing on iTunes on my iMac, BUT on my iPad2 it showed 7.1GB.
None of this makes any sense. I guess I could have left it alone and viewed duplicate photos but if duplicate photos were causing available memory to be reduced, I wanted the memory to come back up for future use.
Also, I noticed that the amount of photos being synced has randomly changed on a couple of these occassions as if I had more or less photos to sync and I haven't. I'm not sure what would cause this either.
Where it says "Other" in the memory bar in ITunes on my iMac is 26.34 GB. Before I did the first sync it was a little over 7GB. What would cause the "Other" to consume so much memory? and what is "Other" Why did it fluctuate so drastically when I've made no changes to my iPad?
I hope I can get some help to this.
Thanks!

Brock_DB wrote:
Where it says "Other" in the memory bar in ITunes on my iMac is 26.34 GB. Before I did the first sync it was a little over 7GB. What would cause the "Other" to consume so much memory? and what is "Other" Why did it fluctuate so drastically when I've made no changes to my iPad?
"Other" can be the cause of this storage capacity snafu that you have going on with your iPad. "Other" is pretty much what it sounds like it should be with regard to what is stored on your iPad. It is "stuff" associated with apps but not the apps themselves or any other media. It consists of Safari Bookmarks and history, Notes, text messages, email messages, contacts, photos associated with contacts and items of that nature. It should not be anywhere near 26 GB and the fact that you have much is a little bit of a problem.
Sometimes the only way to rid your device of that bloated "other" is by restoring as a new device without using the backup. There could be something corrupt on your iPad and if you restore from a corrupted backup, you will just end up back where you started. Also, sometimes this issue is caused by syncing photos and while I don't know this for a fact, it might have something to do with the metadata associated with the photos that gets corrupted and then that might cause this "other" storage problem.
Take a look at some of these and see if something in one of them helps.
https://www.google.com/search?q=What%20is%20%22Other%22%20on%20my%20iPad%20and%2 0how%20do%20I%20get%20rid%20of%20it?#q=What%20is%20%22Other%22%20on%20my%20iPad% 20and%20how%20do%20I%20get%20rid%20of%20it%3F

Will Installing more RAM improve performance, IF laptop has "available memory" not being used?

My laptop has 2x 1GB of RAM.
Right now, and usually, The Physical Memory shown in Task Manager, shows that there is "available memory" (currently it's 500megs worth). (And "system cache" says 300megs.)
There is also, right now, 2.5GB of page filing being used.
If I were to replace the 2GB of RAM with 4GB (of the same Mhz), would there be a noticable increase in performance?
(windows XP 32bit OS)

A matched set of DDR2 ram will perform a lot faster one memory not matched. Its required for the double data rate to work. Hence 2+2 is the max you'd need/want in a 32bit machine. Windows 7 was built for large memory footprints. XP was built to run just barely in 64MB but really needed a min of 128MB to support a network connection and printing. It was never enable to truely go a whole lot further than a few machines built capable of 1GB. There was even a bug which was patch causing problems if a !GB or more was available. Just because it can see it does not mean it actually uses it !! The kernal by default is swapped in/out of ram even in larger memory systems. Why, it was is not aware of the extra memory and does not change its behavour from a 512MB machine.
As for the 1333Mhz ram the timing may be faster than the other memory used. Hence it flow the data faster on the bus. Fewer delays in various cycles including the RAS/CAS etc but thats all under the hood so to speak.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Focus points Aperture 3.0.3 not correctly shown

Hi,
When I press the Alt-F key-combination the focus points are shown in the image. But for some reason they are off. I took some pictures where I'm sure I used the center focuspoint, but in Aperture they show up as the far right focuspoint.
Is this a known issue ?
Grtx,
Remco

Remco - this is NOT an explanation or answer to your question (sorry), but I sometimes see the focus point highlighted in RED, other times it is highlighted in WHITE...I have 12 focus points in the VF and the display normally shows the correct one (as I remember), but as described, the selected point varies in color...I don't understand this and wonder if that part of the metadata handling is buggy...I've also noticed that sometimes metadata values are reported as scientific notation (2.3 x E*some value), other times as ordinal numbers (the correct way)..makes me suspicious of ALL of the metadata info presented.
Sorry I couldn't help but only corroborate and commiserate...maybe someone from Apple will see this and look into the problems.
cheers,
david

1z0-151 not correctly shown on certification website

1z0-151:
1) missing from:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=458&get_params=p_track_id:PLSQL
2) Does not seem to appear on certification track link from
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=652&get_params=p_exam_id:1Z0-151
possible other inconsisticies as well

Actually, the Forms Developer certification should be removed from this page, rather than adding another Forms Developer certification.
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=458&get_params=p_track_id:PLSQL
The 11g FM Forms Developer track is here http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=458&get_params=p_track_id:Middleware11gFD.
Regards,
Brandye Barrington
Certification Forum Moderator

CS6 not updating available memory in Preferences after computer upgrade Windows 7

Computer had a memory upgrade but CS6 is not reading new available memory (64 bit version of CS6). Please help

Please use CS 6 menu Help>System Info... use its copy button and paste the result here like this;
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 12
Logical processor count: 24
Processor speed: 1995 MHz
Built-in memory: 40886 MB
Free memory: 33408 MB
Memory available to Photoshop: 37179 MB
Memory used by Photoshop: 95 %
Image tile size: 1024K
Image cache levels: 6
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.1 CUDA 6.5.12
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: Quadro 4000/PCIe/SSE2
Display: 2
Display Bounds: top=0, left=-1360, bottom=768, right=0
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 1
Video Card: NVIDIA Quadro 4000
Driver Version: 9.18.13.4052
Driver Date: 20140702000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA Quadro 4000
Video Card Memory: 2048 MB
Serial number: 96040035116912554961
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\JOHNJM~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 465.2G, 176.3G free
C:\, 224.2G, 100.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: C:\Photoshop64 Plug-Ins\
Installed components:
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/09/10-12:31:21   5.0.4   79.517869
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1686
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.0.20577   2.1.0.20577
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1681
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
Required plug-ins:
   3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   Angled Strokes 13.0
   Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 8.6
   Camera Raw Filter 8.6
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Embed Watermark 4.0
   Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Extrude 13.0
   FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mezzotint 13.0
   Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Pinch 13.0
   Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.1.2
   Shear 13.0
   Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Sumi-e 13.0
   Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Wind 13.0
   Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   ZigZag 13.0
Optional and third party plug-ins:
   Alias PIX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Contact Sheet II 12.0 (12.0x001)
   CUR (Windows Cursor) NO VERSION
   D3D/DDS 8, 55, 0109, 1800
   ElectricImage 13.0
   Face Control II 2.00
   Fine Touch 3.25
   GREYCstoration NO VERSION
   HSB/HSL 13.0
   ICO (Windows Icon) NO VERSION
   Lighting Effects Classic 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   NormalMapFilter 8.55.0109.1800
   Picture Package 12.0 (12.0x001)
   Reduce Noise 7.0.0.0
   ScriptListener 13.0
   SGI RGB 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   SoftImage 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   StarFilter Pro 3 3.0.5.1
   SuperPNG 2.0
   Wavefront RLA 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Web Photo Gallery 12.0 (12.0x001)
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Photo Collage Toolkit
   Kuler
Installed TWAIN devices: NONE

2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space

Hi Experts,
I am getting below error when Exporting data from my one web application to the Excel 2010 on Windows Server 2008 R2 ,
02/29/2012 18:54:50
Type : System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b11a5c481859e569
Message : -2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.
• To make more memory available, close workbooks or programs you no longer need.
• To free disk space, delete files you no longer need from the disk you are saving to.
The disk space is 30 GB free, I have cleared all the temp files, increased the virtual memory & internet temp files size to max but no luck

You want to use this one here - MMC
comexp.msc /32
THAT will launch the MMC process
as 32 bit then you'll the Microsoft Excel Application.
Right Click -> Properties.
What I did at this point was to select the Identity tab and then select "The Interactive User" (the default was "The launching user"). My app pool was already running as "LocalSystem". I believe by running it as the Interactive User now that it
has the right permissions to save workbooks.
Everything worked after this.
This was a tough one!
R. Matt Sampson

IPhone 4 - deleted images, after got low memory error msg rcvd, but available memory has not increased!!

I have an iPhone 4 16GB. Was recording a video the other day, and got this msg: "Warning: You are running out of disk space. Please delete some photos or videos". Ok, so I had like 5,000+ images in my "camera roll", don't have any other folders. ALOT were from the Internet, when I would hold down on an image, and pick "save image". So, using common sense, I went into camera, under camera roll, then hit arrow icon in bottom left corner, and proceeded to check mark images. Once I had a group, I'd hit delete. I did this several times, until I was left with only about 1/2 the amount of images, which was about 3,000. I rebooted my iphone. I then went into settings> general> about, and looked under available, which still showed only about 100MB available out of 14GB. How is this possible? Now, when I go into camera, the lense won't even open, and I keep getting the same error msg. Maybe 3,000 is still alot, but remember, I had almost 6,000 images before, with NO problems till just a few days ago. So, how do I get my iPhone available memory back, if already deleted images, as instructed???

You need to connect the iPhone to the computer and import those photos to the computer. Photos are not really supposed to be stored in the camera roll as it can cause problems, as you have already seen. Also, should the iPhone crash, you could lose all of the photos without having a backup of them. Once you have downloaded all the pictures, you should be able to go into Explorer and delete everything out of that folder. Then reset the iPhone and it should clear the memory. The iPhone is probably holding the memory because the Library hasn't updated. A sync would help as it tends to reset things. I've read of other issues with keeping too many photos in the camera roll and issues with saving from the Internet as well, however much of that was in earlier versions of iOS. I believe that has been corrected.
Once you have imported the photos and deleted them from the camera roll, you can sync them back through iTunes in the Photos tab if you want them on the phone.

SAPOSCOL is not working(shared memory not available)

Hi All,
One of my Prodn appln server instance is not displaying the data in tcode OS06,
Even though other instances of app server was able to display;
Getting message : SAPOSCOL is not working(shared memory not available)
Envirn :
Kernel 640 patch 196 ; 64 bit
Collector Versions
running COLL 20.94 640 - V3.73 64Bit
dialog COLL 20.94 640 - V3.73 64Bit
What could be reason for it ? Please suggest possible solutions..
Thanks in Advance

Hello Ramakrishna,
I suggest you to kindly go to OS level and restart the saposcol service and check if that works.
<b>No values and/or problems with shared memory</b>
Check whether saposcol belongs to user 'root' and whether the authorizations are correct: -rwsr-x---
Because the values of saposcol must be visible for all R/3 systems/instances on a host, saposcol writes data in the shared memory segment with key 1002. This shared memory segment must not be changed (for example, by setting profile parameter ipc/shm_psize_1002). In all profiles, check whether the parameter ipc/shm_psize_1002 is set. If it is, this parameter must be removed from the profiles ---> Note 37537.
For further details please refer SAP Note 189072 , 726094.
Regards,
Prem

My iPad is double downloading iTunes TV series shows and when I delete, the extra show does not delete from the available memory. I have lost almost 30GB of my 64 to this phantom shows.

I am losing available memory on my iPad (64 GB 3rd gen) and it appears to lose memory because some TV shows that I have downloaded from iTunes are appearing twice in my downloads. Both download, but when Only appear as 1 show on my "videos". After viewing the show, I delete, but the duplicate show appears to be still there somewhere (not visible anywhere) taking up the same amount of memory that showed before downloading. It reduces my available memory to download other shows. The general settings do not show any of these phantom shows taking any memory, but the total available is much, much less than what is showing for all usage such as music, videos, photos, apps, etc
Is it possible to delete a show from the download portion of iTunes if you have already seen a show and do not want to waste time or memory downloading again? The only way that I know is to let it download completely and the delete from "Videos".

John0618. Did you ever get a response or solution to problem? I have the same problem (starting about three months ago).

Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.

This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine.

SCVMM 2008 R2 - "The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS)."

I know this question has been asked before, but never for R2, that I can tell, and the posted fixes aren't working. I have just installed SCVMM 2008 R2 on a Windows Server 2008 R2 server, using a remote SQL 2008 SP1 database. When I attempt to connect to SCVMM, I get the following error:
"The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS).
Ensure that the SQL Server service is running under a domain account or a computer account that has permission to access AD DS. For more information, see "Some applications and APIs require access to authorization information on account objects" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=121054.
ID: 2607"
What I've seen online is that this is usually becuase the domain account SCVMM is running as does not have the proper permissions on the SQL database. Here's what I've confirmed:
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still "doesn't have access to AD DS," which is obviously untrue)
5) Neither service account is locked out
Has anyone run in to this? It says in Technet that remote SQL 2008 is supported, as long as the SQL management studio is installed to the SCVMM server, and I installed and patched before I began the SCVMM installation. I just don't know what else to try - I have no errors in event logs, no issues during the installation itself...
Andrew Topp

That answer was very unhelpful fr33m4n. The individual mentions that they've received the error that points to the KB article. I currently receive the same error -- there seems to be no resolution. I've run the Microsoft VBS script to add TAUG to the WAAG
as suggested by 331951, and that made absolutely no difference.
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still
"doesn't have access to AD DS," which is obviously untrue)
The user is also a member of WAAG, the machines have delegated authority to each other. Is there any other solution?

ECC IM report, the available and assigned budgets are not correct

Hi All
Can any one tell me why there is a difference in the ECC IM report, the available and assigned budgets are not correct on program position level.
But individual investment order level, they are correct..
The report we are running is : S_ALR_870122806 .
Any help higly appreciated and points are assigned .
Cheers
ravindra .

Hi,
Tcode GR23 , Under 1VK Report library, Choose Characteristics Tab for Company Code Select BUKRS,and GSBER for Business Area.
Regards,
Shankar K B

Finder is not correctly reporting available disk space

finder is not correctly reporting available disk space
my drive is 50% full but finder shows there is only @ 35% left
the difference is more than anything needed by the system
any ideas on what is causing the problem?

Try this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Error in Inbound Queue : Internally required memory not available

Hi,
We are trying to send 110MB file from R/3 to Legacy thru XI. It is failing in XI inbound queue with error <b>Internally required memory not available</b>. When i saw memory usage in XI server it is using full 3GB of extended memory and entering in private mode. We dont have any problem upto 50MB files.
Please any inputs.
Regards,
Ranjeeth.

try to process the data by breaking the message into dependant segments

Available memory not correct shown in SCVMM 2008

Similar Messages

Maybe you are looking for