Available port numbers
hello,
can anyone help me to found the oracle port reserved numbers
eg 1521,1523 for listener etc..
thanks in advance
Did you check the user guide?
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14201/ports.htm
C.
Similar Messages
-
Socket connection - Available Port Numbers
Hi,
I am trying to connect to a server running on Unix through my NT client. This is being done via socket connection and by supplying IP Address of the machine plus the port number.
My server is running on Unix, Solaris 8, Ultra 5 machine. I want to know if there is some allowable range of Port Numbers on the Unix machine?
Or is it that I can use any number starting from 1 to infinite as my port number?
Thanks.The ports below 1024 are reserver for only the "root" user and 65536 is usually the max port
number available. Ports below 1024 are also reserved for a user in the Administrators group on NT and W2K.
Actually, the maximum port number is 65535 since IPv4 port numbers are 16 bit quantities and that is the maximum value of a 16 bit quantity. -
Different port numbers available in xi
Hi
while I was going through the forum I have come across different port numbers like j2ee port, http port, smpt etc. Could you please summarize what are all the different ports that xi has to communicate and how to find that prot numbers. I mean different transactions to see the same.
thanks
kumarHi,
The following instances will be created as per the type of installation.
Abap+java system =
/usr/sap/<SID>/DVEBMGS<<b>NR</b>>
/usr/sap/<SID>/SCS<<b>NR1</b>>
Stand alone java system =
/usr/sap/<SID>/JC<<b>NR</b>>
/usr/sap/<SID>/SCS<<b>NR1</b>>
All the port numbers are determined by the NR and not by NR1.
You will have JC<NR> when you have a standalone Java system installed and DVEBMGS<NR> when you have a ABAP+JAVA system installed. Both of these will not exist together for a particular Installation.
And you will have SCS instance in both the cases i.e if you have Java Addin( ABAP+JAVA) or a Standalone Java System.
Thanks,
Tanuj -
Need Help-Unable to find an available port
Hi,
I am Working one BPEL Process where in need to invoke a WebService.
I was able to deploy my BPEL Process with the Web Service Call but i am getting an error while invoking the Webservice from the Process.
BPEL PM Version 10.1.2.0.2
<bindingFault>
<part name="summary" >
<summary>Unable to find an available port</summary>
</part>
</bindingFault>
Can you please let me know any work around is needed here.
Thanks in Advance
Edited by: user2574568 on Jun 24, 2009 8:28 AM
Edited by: user2574568 on Jun 24, 2009 12:23 PMInclude the following jar's in your classpath and re-compile ur code. It should work:
- commons-discovery.jar
- servlet-2_2.jar
- axis.jar
- saaj.jar
- jaxrpc.jar -
Port Numbers Clarification During Portal Installation
I have installed Portal 9.x. My infrastructure port is set at 7777 and my midtier port is set at 7779. This is how it was configured during the configuration stage.
Therefore shouldn't I be able to access Portal through the port 7777? Did I do any wrong thing when I installed?.
If I did then is there a way to change the port from 7779 to 7777 so that I can access it via 7777?
Thanks.There are instructions on Metalink for changing the port numbers but they are spread out and hard to find and pick the right ones. I have gotten 2 files that I use to change my port numbers. Here they are:
How to Change the Port used for Oracle 9iAS Portal 9.0.x
1. Add the New port to Web Cache and map to the OHS (Apache)
a. Login to Webcache as an admin user
b. Select the Listening Ports link
c. Click the Add button, and use these settings to create the additional port
I. For Cache: <Select the webcache in use>
II. IP Address: ANY
III. Port Number: 80
IV. Protocol: HTTP
V. Wallet: <Leave null>
d. Select the Site to Server Mapping link
e. Select the radio button for the top entry (Priority 1) and click the button Insert Above
f. Select the radio button for Enter Site Name, and enter the following
I. Host Name: <Your ServerName directive from OHS (Apache)>
II. Port Number: 80
g. Check the box the HTTP entry located under the Select Application Web Servers Section
h. Accept Remainder of Defaults and click the Submit button
i. Click the Apply Changes button in the upper right of the screen
2. Restart the WebCache Server
3. Add a Partner Application to the Oracle 9iAS Single Signon for the new port using ptlasst script in SSOPARTNERCONFIG mode
(Passwords required may be lookup in OID using the note referenced below)
/u01/ora9portal/assistants/opca/ptlasst.csh -i custom -mode SSOPARTNERCONFIG \
-s <portalSchema> -sp <portalPassWord> -c <iasinfraServerName:1521:iasdb> \
-sdad <portalDad> -o <ssoSchema> -odad <ssoDad> -host <apacheServerName> \
-port 80 -silent -verbose -sso_c <iasinfraServerName:1521:iasdb> \
-sso_h <OHSServerName> -sso_p <ssoWebPort> \
-pa <ssoPartnerAppSchema> -pap <ssoPartnerAppSchemaPassWord> \
-ps <ssoProcessStoreSchema> -pp <ssoProcessStoreSchemaPassword> \
-p_tns <tnsConnectStringtoInfraDB> -s_tns <tnsConnectStringtoInfraDB> \
-iasname <iasMiddleTierInstanceName>
Here is an example on a Unix Server
/u01/ora9portal/assistants/opca/ptlasst.csh -i custom -mode SSOPARTNERCONFIG \
-s portal -sp W18Wqn49 -c www.oracle.com:1521:iasdb \
-sdad portal -o orasso -odad orasso -host www.oracle.com \
-port 80 -silent -verbose -sso_c www.oracle.com:1521:iasdb \
-sso_h www.oracle.com -sso_p 7777 \
-pa orasso_pa -pap A2u3g00t \
-ps orasso_ps -pp BRKU0C6a \
-p_tns iasdb -s_tns iasdb \
-iasname iasmid.www.oracle.com
4. Modify the httpd.conf file located in the 9iAS Middle tier home to use port 80
a. Edit the httpd.conf file and change the Port directive to 80
Port 80
b. Do NOT modify the Listen directive in the file
5. Restart the http server in the Middle Tier
The port has now been modified and the site may be accessed using Port 80.
6. Login to Portal as an admin user, and reset the SSO Server Settings
a. Login to Portal as portal
b. Select the Builder link
c. Select the Administer tab
d. Select the Global Settings link
e. Select the SSO/OID tab
f. Under the SSO Server Settings section, modify the Query Path URL Prefix to use the correct sso port.
The SSO Server is usually running on Port 7777, but creating the partner application would also change this port to 80.
g. Select the apply, and ok buttons
I use this for Running the script above:
Windows Script to Determine orasso Password in 9iAS Release 2 (9.0.2)
1. Paste the following script in a file named showPassword.bat and copy it in
a directory. Please also ensure that ldapserach is there in PATH on your
widnows machine.
8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<
set OIDHOST=bldel18.in.oracle.com
set OIDPORT=4032
if "%1"== "" goto cont
if "%2"== "" goto cont
ldapsearch -h %OIDHOST% -p %OIDPORT% -D "cn=orcladmin" -w "%1" -b "cn=IAS Infrastructure
Databases,cn=IAS,cn=Products,cn=OracleContext" -s sub "orclResourceName=%2"
orclpasswordattribute
goto :end
:cont
echo Correct Syntax is
echo showpassword.bat orcladminpassword username
:end
8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<8<
Note that the "ldapsearch...orclpasswordattribute" commands should be put on
one line.
2. Edit the script and update with your own hostname and OID port
OIDHOST=bldel18.in.oracle.com
OIDPORT=4032
3. Ensure that you have ldapsearch from the correct ORACLE_HOME in the PATH
4. Check that OID is up and running before proceeding.
5. Run the script, and enter the schema name as: orasso, and the password value
is shown.
For example:
(all ONE line...may be easier to copy/paste from Notepad)
C:\> showPassword.bat oracle1 orasso
OrclResourceName=ORASSO,orclReferenceName=iasdb.bldel18.in.oracle.com,cn=IAS Inf
rastructure Databases,cn=IAS,cn=Products,cn=OracleContext
orclpasswordattribute=Gbn3Fd24
The orasso password in this example is Gbn3Fd24. -
How many port numbers do I need assigned for an XIR3 deployment
How many port numbers are required per XIR3 environment on Linux Red Hat 4/JBOSS/? I only plan to use the following apps (CMC, Infoview, Designer, Report Migration Tool, Import Wizard).
Am I right in thinking it's four ports ?
1. 1 for the application
2. 1 for SIA?
3. 2 for CMS (Name server port, request port)
If this is incorrect could someone clarify how many, and what for?
Many thanks in advanceHi there,
When I look at the Servers list and look at the CMS server I see three potential port numbers:
1. Request Port
2. Hostname or IP Address
3. Name Server Port
I know we need the third one so can I ask why you say you only need two servers for the CMS, as the list above seem to be suggesting three?
Thanks for your help in advance -
What is the maximum number of columns available in Numbers 3.1?
What is the maximum number of columns available in Numbers 3.1? (I don't seem to be able to get past Column IU. Is that just how it is?)
DBacs wrote:
Aha! Just after posting this, the Support Community website suggested "More Like This", and I discovered the answer: 256 columns. (I don't suppose I get Genius Points for answering my own question, do I...?)
No -
Available Serial Numbers in my DB.
I have SAP B1 8.8 PL 12.
I need to know what are all the available serial numbers in my system or if have a serial number i need to know if it is available to sell or not.
what tables and flags can i see to get that information. Previously i used to use OSRI tables for that.
But now i am using OSRN and OITL and ITL1 for getting information on serial number but they dont have the available status.
pls help.
thanks
raghuhi,
Description
SerialNumbers is a business object that represents the serial numbers and additional tracking information of items. This object is part of the Inventory and Production module.
Source table: OSRN, OITL, ITL1.
Remarks
This object helps you to track items using their serial number. A computer, for example, can be located by its serial number. The serial number can provide additional information regarding a specific item such as its manufacturing date, warranty data, location in warehouse, and so on.
To display the form in the application:
Select Inventory --> Item Management --> Serial Number --> Serial Numbers Management.
Set your selection criteria and click OK. (The form will appear only if Serial Numbers are defined for the selected items.)
To de-allocate batches without actually remove them from stock (based Delivery), update SO so that it has no batches defined - it works this way in the UI and should work in DI the same - if not it should be fixed. Please note that batches allocated by Reserve Invoice canNOT be deallocated this way since we do not support Reserve Invoice updating. Batches allocated by Reserve Invoice can only be drawn to the Delivery/Invoice.
regards,
Fidel -
Hard-coded endpoint port numbers in services-config.xml
Is it possible to remove hard-coded port numbers in
services-config.xml and replace them with variables? I'd like to
deploy the same Flex application War file (including
services-config.xml within it) to our Dev, UAT and then Production
environments, for which the endpoints and port numbers must vary.
Re-building the app for each environment isn't desirable.
Has anyone else achieved this?Maybe I can clarify what I mean. I'm assuming that basically
the same war file needs to be deployed twice to the same app
server, as in the original example, excluding changes to config
files (e.g. editing xml=ok, recompiling jars/swf=not ok).
The problem arises because if you were to change the config
file to use another port, it wouldn't make a difference to the
client app, which has the port and destination compiled in. You
would need to compile the app twice, once with the first port, once
with the second.
So my workaround is to compile (not deploy) with a config
file containing two sets of destination channels, then in your
deployed config files you remove one of the sets.
Assuming you want to deploy two instances of an app into a
single app server, there will 3 different configs, one used just to
compile, and one for each of the two deployed instances.
Config A (compilation config files, used only to compile the
flex application, not used during server start up) contains:
my-rtmp1, my-rtmp2, my-destination1, my-destination2.
Config B (server 1-debug) contains: my-rtmp1, my-destination1
Config C (server 2-release) contains: my-rtmp2,
my-destination2
So when you deploy two instances with Config B and Config C,
there is no port conflict. The Flex app then has some parameter set
in the wrapper (or the absence of said parameter could be the
indicator) to tell it whether to use my-rtmp1 or my-rtmp2.
I just tested this and it worked. The way I tested was to add
two buttons to a the Flex app, one which connects to
destination1and performs a fill, one which connections to
destination2 and performs the same operation. This Flex application
was compiled with config A.
I start a server with config B, and the application starts
fine, and the first button gets the fill as expected. The second
button instantly crashes the entire browser with an illegal memory
access exception. The second set of dest/channels aren't listening,
since the server doesn't know anything about them in it's config
file.
So on the bright side, that confirms to me that you can
compile an app with redundant channels and destinations, then
choose which destination/channel you want to use at runtime.
On the down side, being able to consistently cause a crash
like that usually isn't a good sign. I'll look again on Monday, and
raise a Flash bug if it's still present in the latest version. -
How to see Dispatcher, gateway and Message server port numbers?
Hi All,
Can any body tell me how to know the port numbers of dispatcher, gateway & message server in a particular sap application server.
Thanks & Regards
Srinivas KHi,
This is very work around way...
SM51-Choose theserver-there one icon (Magnifying glass) choose detaiols -
There you will get dispatchet port.
SMGW -
dispaly file(icon) -
in that you can find the port on which gate way is working.
SMMS-goto-parametere--display...you can find the port for MS.
SMMS -goto-display details (will give more info) you can find diff ports ...
Apart from these all these services when they start they write log in work dir there we can find which port they are using while starting ..
We can find them in the individual monitoring t-codes like SMMS,SMGW,SM51 etc..or from AL11 go to work dir and look at dev_disp,dev_ms,dev_rd.
This is all very work around...
The best will be services file at os level.
Thanks. -
Changing the Port numbers in EBS R12
Hi
please suggest me the documents for changing the port number in R12 .
thanks
SimhaHi,
Please see
If you want to change the Web listener please see.
How to change the Web Listener Port number in Oracle E-Business Suite Release 12? [ID 760590.1]
If you want to change the port numbers for the while E business suite, then cloning is the best option.
While running post clone, select the port pool you want.,
Thanks -
Changing the port numbers of the KXS, KJS, KCS, CXS
hi,
If i want to change the ports of any processes on iAS 6.5, say for KJS, should i to do it in the following way?
Go to iPlanet Registry Editor and move to software/iplanet/application server/6.5/ccso/eng/1/ directory.
There there is a key called port with an entry 10819. If i change it to desired port number, is it sufficient?
thanks in advance,
desiganHey Nicolas, I have checked the min and max handlers. it was just 2. so the port numbers are okay.
After i change PSDBGSRV port number the PSDBGSRV has been started but it gave me the error at PSRENSERV, which is next to PSDBGSRV.
I have increased the PSRENSERV ports also by 10.
default_http_port=7190
default_https_port=7153
default_auth_token=peoplesoft.com
But it still giving me the error.
PSDBGSRV.2120 (0) [12/20/08 15:56:00](0) PeopleTools Release 8.49 (WinX86) starting
PSDBGSRV.2120 (0) [12/20/08 15:56:00](0) Cache Directory being used: C:\HRDMO\appserv\HRDMO\CACHE\PSDBGSRV_1\
PSDBGSRV.2120 (0) [12/20/08 15:56:01](0) Server started
PSRENSRV.2408 [12/20/08 15:56:01](0) PeopleTools Release 8.49 (WinX86) starting
PSRENSRV.2408 [12/20/08 15:56:01](3) Switching to new log file C:\HRDMO\appserv\HRDMO\LOGS\PSRENSRV_1220.LOG
PSWATCHSRV.4012 (0) [12/20/08 15:56:17] Shutting down
PSADMIN.2796 (0) [12/20/08 15:56:23](0) End boot attempt on domain HRDMO
Thank you. -
Hi WCI Guru's,
I need a list of all port numbers used by the different components of Oracle WCI. Can anyone share the list with me.
One more thing, our portal is an intranet and we are looking to make it an extranet. Please can one of you suggest on the port numbers which need to be enabled.What version of WCI are you using?
-
Hi all,
In case, an Item Master Data has no Serial Numbers Management ( Serial Manage Item by : None) , and there is stock into the warehouse (either by transactions or by initial quantities) and it decided change of Serial Numbers Management Status as Serial Manage by: Serial Numbers & Management Method :On Release only ), is there a way to release stock, as there are no Available Serial Numbers?
Thanks in advance
VangelisHi,
As per my understanding, You have created an item with Serial Number managed : None. And you have stock in it. But now, you want to change the item as Serial Number managed.
Then you clear the stock using Goods Issue or by using Inventory trackingand Stock Posting.
Then open the item master and change the Magane Item by in Serial and Batch Numbers as Serial numbers and update the record.
Then Using Goods Receipt document, take the quantity you issued into stock. Now the system asks for Serial numbers. If you have serial Number then key them, else create some dummy serial number and key them.
I hope this could help you to solve your problem.
Raja.S -
On my network I have 3 systems that I've set up as RDP hosts. And need to get to all three of them externally. So I'm trying to do the following single port forwarding.
RDP 1 Forward 4000 to port 3389 for 192.168.1.11
RDP 2 Forward 4001 to port 3389 for 192.168.1.12
RDP 3 Forward 4002 to port 3389 for 192.168.1.14
When I hit "Save Changes" I get the error "Port range already exists". So it's good that it won't let me overlap ports generally, but at the same time, I'm trying to send them to different IP address. There should be no overlap in this case. Please advise
I'm trying this on the WRT160Nv2 with firmware 2.0.02, which I had just bought this weekend.kevj,
Thanks for your suggestion. I have now upgraded the firmware to 2.0.03 build 7. But I am still seeing the error message
As I mentioned previously, I'm trying to single port forward to multiple machines in the following way:
Machine 1: Forward 4000 to port 3389 for 192.168.1.11
Machine 2: Forward 4001 to port 3389 for 192.168.1.12
Machine 3: Forward 4002 to port 3389 for 192.168.1.14
The error appears to be generated by the fact that 3389 is selected for multiple external port numbers, but the same internal port number. The router I believe isn't taking into account that the similar internal port numbers aren't taking into account the different internal ip address I'm trying to send this to.
This would be a standard sort of practice for running a live HTTP server on one machine, and a new beta HTTP server behind the router on a secondary machine on the same internal port, but different external port numbers for test purposes from the outside.
Please advise
Thank you.
Maybe you are looking for
-
Schedule line no in GR.
Hi Experts, We need to locate the exact schedule line number [from the Scheduling Agreement-Delivery Schedule ] at the time of creating the GR ie, ETENR to be seen MSEG table. Is there any way to link the schedule line number in GR? For example we ha
-
Value Mapping in PI 7.1
Hi All, Please tell me about value mapping.I have never worked on value mapping earlier.Please give me the steps to do value mapping. Thanks in advance.
-
Manual Reservation for Maintenance Order (Category 30)
Hi, Can anyone suggest some procedure so that I can stop automatic reservation creation from Maintenance Order (type PM01, Category 30) and create manual reservation for the same. Presently Manual reservation is not allowed for Maintenance Order. Tha
-
Reg:Convert DOCX to HTML
Hi, I want to convert a microsoft word document(docx) to html using code. Can anyone help me in this context ... The doc which I am trying to convert will have Bullets,bold,italic,Images etc ... I am able to get the text but not the images and bullet
-
I have InDesign CS2 and CS Premium. Will all of my CS programs update to CS5.5?
I have CS Premium and an upgrade to InDesign(CS2). I know that CS Premium alone will not be eligible for the upgrade but since I have InDesign CS2 I'm assuming I'm eligible. My question might sound silly but will my CS programs update as well? F