Available quantity in MD04 not cumulating

Can somebody tell me where is available quantity cumulated in MD04 for each new item controlled?
for my client- few materials available quantity is gettig cumulated, but for others it si not getting
so user is fed up as he has to manually add the available qty after each item
Pls help

Hi,
The the quantity can be cumulated daywise, monthwise, like this u can control this setting in setting --> Perios total tab. if u are used two diffrebt strategy while putting plan then the quantity can not cummulated.
Regards,
Shekhar Damle

Similar Messages

MRP Logic -Negative Available quantity in MD04

Hi Experts,
We have negative available quantity in MD04. There are no receipts generated particularly for some period even after MRP Run.
MRP Type is maintained as P1- MRP Fixing type.
Safety time is maintained as 3 days.
Planning strategy is 40.
Please suggest, what would be the reason, why i am not getting schedule lines between 09-Aug and 27-Aug which makes available quantity minus, after that there are generation of schedule lines.
Please help with inputs..

Hi,
MRP type P1 is used with planning time fence(mandatory).
Have you used pl time fence. How many days? For those period system will not generate any more planned order.
Regards,
Dharma

Negative Available quantity in MD04

Hi Experts,
We have negative available quantity in MD04. There are no receipts generated particularly for some period even after MRP Run.
Please suggest.

Hi,
Check the MRP type in material master. If this is ND, then system will not make any procurement proposal. Also check the strategies such Make to stock / make to order. If the requirement strategy & the strategy in the material master differs, then also there will not be any procurement proposal.
Regards,
Prashant

Is there a possibility should not consider available quantity at time of MR

Sir,
Is there a possibility should not consider available quantity at time of MRP planning?
Example:
Available stock: 100
Planning stock: 100 (MD61)
Schedule line to be generate: 100 Qty (Exclude the available quantity at time of MRP planning)
regards,
sampath

Dear Sampath/Raj,
1) Move the stock to particular storage location for which you don't want to be consider by MRP
2) Now go to OMIR t-code, input value as 1 for that particular storage location
3) Go to MMSC, input value as 1 for that particular storage location
4) Go to MRP - 4 view Down you can find field Storage location input value as 1
5) Now run MRP, system will not consider stock of that particular storage location
Regards
Madhu

MD04 - Available quantity

Hi....
I m creating a Report to display the available quantity for a
particular material on a particular date....same way it is displayed
in the standard tcode MD04.
Also I need to display the projected usage quantity for next three
months where user will input the date. I need to find this projected
usage quantity again like MD04 transaction code. This tcode uses
structures MDEZ and MDSU to display the available quantity and other
data.
Are there any function modules availble to get it or are there any
tables from where i can get this required data?
Thanks in advance,
Prasad

Maybe you could use the function module MD_STOCK_REQUIREMENTS_LIST_API?

How to get available quantity in Inventory levels for all materials

Hi..All
I am Abap Developer and i have a Requirement that to Print a report that Displays " Inventory levels (available quantity) for all materials"
1) What tables can i use to retrive the data to get the Inventory levels (available quantity) for all materials.
2).What are the fields can used in that tables that use ful for end user.
Thank you,
Madhu .
Edited by: madhubabu rao on Oct 15, 2008 9:10 AM

Hi,
I'm not sure what you mean when you are speaking about inventory levels and available quantity.
I mean that you may have stock of 100 pcs of a certain material but from an open PrdOrd can come a reservation for this component (e.g. 20 pcs) that reduces this the available quantity (to 80 pcs).
If you want only the stock levels, you don't have to write any ABAP code, since MB52 report is designed for this purpose.
If you want to know the available stock (considering requirements (PIR, DepReq, SO), and stock-like MRP elements (PldOrd, PurReq, PrdOrd, PO, etc)) you should check report MD04 and examine how it works, which tables it uses (ST01).
http://iorboaz.blogspot.com/2005/04/get-md04-data.html
Regards,
Csaba
Edited by: Csaba Szommer on Oct 15, 2008 9:34 AM
Edited by: Csaba Szommer on Oct 15, 2008 9:34 AM

Inventory Error :Transaction quantity must be = available quantity.

An error occurred while relieving reservations.|Transaction quantity must be less than or equal to available quantity.
while doing material transactions in transaction open interface iam getting above error......Kindly help me as i am struck here and it is high priority issue and need to be resolved as soon as possible..

refer -
Pending Move Transactions FAQ [ID 1141334.1]
WIP_MOVE_TXN_INTERFACE Common Errors In Pending Move Transactions With Possible Causes And Action Plan To Process Them [ID 457066.1]
Outside Processing Wip Move Transaction Fails With Overcompletion Quantity [ID 427558.1]
Pending Move Transaction Error - Allow Moves Not Enabled [ID 780732.1]
R12 OSP Job (Also Repetitive Schedule) Do Not Support Overcompletion: Error 'Transaction quantity must be less than or equal...' [ID 563011.1]
cheers,
VB

Incorrect requirement quantity in MD04

Dear experts,
Transaction WC27 runs in 00:05 everyday,it expended 1 hour.In this period,if I make some document with transaction MFBF(e.g. HALB A +100, exploded materail ROH B -200).In MD04,requirement quantity will change( B requiement quantity will reduce 200).Now in our system,requirement quantity still do not change( B requiement quantity is 200 ).
Remarks:system version R/3 470.
Could you help me?
Thanks and regards,
collysun

Hello,
Have you solved the issue?
thanks,
Siddu

Available quantity

Hi,
The calculation for Available Quantity is sometimes confusing for certain companies. In SAP, Available=InStock-Committed+Ordered. Several companies consider Available as InStock-Committed.
It would be great if this calculation could be user-definable (per company). For example, you could have this under Document Settings, with the options:
Available=InStock-Committed+Ordered
Or
Available=InStock-Committed
Thanks,
Jose

Hi Jose......
I think you are not aware about MRP Functionality not only in SAP but in Basics also....
Please go through these links......
http://it.toolbox.com/blogs/sap-library/mrp-in-sap-business-one-a-business-scenario-10625
http://wiki.sdn.sap.com/wiki/display/B1/SAPBusinessOne...ToGo-7.TheABCsof+MRP
http://en.wikipedia.org/wiki/Material_requirements_planning
Hope this will clear your doubt why this relation is important from planning point of view........
Regards,
Rahul

Why is the Planned quantity in MCP9 not appearing(Repetitive Manufacturing)

Sub:WHY IS THE PLANNED QUANTITY IN MCP9 NOT APPEARING(REPITITIVE MANUFACTURING
Why are the planned orders not displayed anymore. They are still in the system - in MD04 - but since we moved from release 3.1i to 4.0 the plan order qty disappeared from transaction MCP9!!!!.Now we are using Version 4.7
There must be a reason
Perhaps searching in SAP OSS system -if the transaction is not supported in rel 4.0 anymore and we should use something else instead
Or we need to apply an OSS note from SAP to repair the problem...
Or the info system update must be modified because of rel change... I don't know.
Please suggest your valuable guidance,Iam not able to enclose a screenshot of the problem,planned qty is 0 or it is not getting displayed.If you reply to this query i can send a detailed analysis to that mail id .

Dear Guruji Mr.Rajesha vittal,
Sir ,iam stuck with this problem,not able to proceed.
Can i send the activites i have completed till now ,I want your e mial id sir for me to send the attachments to you.
Also i dont know how to award points i need to award points to u for all the solutions i have recieved till now ,can you please explain to me
I am stuck with this MCP9 problem i have done it according to your suggestion,but still the planned quantities are not displayed. can you please help me out.Very urgent. I need u mail id
Thanks & Awaiting your reply
P.S.KIRAN
[email protected]
[email protected]

Confusion on available quantity

Dear friends/experts,
Sometimes we found that on-hand-quantity is more than zero but the available quantity is zero in a specific subinventory, but we can not find any SO which reserved those on-hand quantity in that subinventory. So we can not pick release any SO with those on-hand goods.
Afterwards, we released some reservations in another subinventory for the same goods and lots. Then the on-hand quantity in the original subinventory changed to be available. Then we can pick release the.
Although the problem has been resolved, but I'm very confused on that case. Is there anyone knowing the actual reason?
Thanks in advance.
Best regards,
Ning

Try to see on hand quantity of the item, subinventory wise. It is possible that your operation unit might have many subinventories and you are trying to transact the item from that subinventory which has zero on hand of partcular item.

Change available quantity for Sales Order line during ATP control

Hello,
When sales order is created and item line is entered I need change available quantity for material. I mean not ATP quantity but available quantity (MCHB-CLABS for material/plant - I need remove some batches from logic)
Could you tell me when I could add my enhancement for above purpose?
Thanks in advance,
E

Did you try the assignment (Enhancement) ATP00001?

Availability quantity after changing sales order -

Hi experts,
where is the settings for availability quanity for assembly order..
problem is..
after creating sales order when we wanted to do change ..that time i am not getting availability quantity..
Thanksin Advance,
Anthyodaya...

Hello,
I hope you are using the Standard Assembly to Order strategy,in ATO if any changes in Sale order like Delivery date, Quantity will pass to production Order directly,vice Versa any changes in production Order will be passed back to Sale Order.
Generally in ATO availability check will be carried out at component level, Based on the availability date of component , the delivery date get adjusted.
Now explain me , what changes you have done in sale order, either date or quantity, what message you are getting during your availability check.
Regards
Pradeep

Purchase Order Goods Receipt quantity tolerance setting not working.

Team,
We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
The issue that I have is as follows:
Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the material master and also changed the message to a warning in OMCQ for message number M0722.
I had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
I have searched for OSS notes, however they mention that there is no solution.
Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
Thanks

Hello,
Please check the Tolerance levels in O588
Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
Best Regards,
R.Brahmankar

Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

Hi Folks,
I was trying to save basic search template master page "seattle.master" after making change to the template.
I have added just "CompanyName" folder and update the line below in seattle.master.
Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
When I save it, and refresh page on browser, it shows "Something went wrong" error.
ULS says the following error : "UserAgent not Available, file operation may not be optimized"
Pls let us know if there is a solution.
Any help Much appreciated !
Thanks,
Sal

Hi Salman,
Thanks for posting this issue,
Just remove this below given tag and check out. It might be happened that your control is conflicting with others.
Also, browse the below mentioned URL for more details
http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Available quantity in MD04 not cumulating

Similar Messages

Maybe you are looking for