Available working time for setup and produce activity is not the same.

Hi,
For some resources, there are certain setups which require high skilled operators that work less time that the machine. In the setup matrix these setups are recognized because they take much longer than the normal setups.
How can I control that no setups with special operators are planned outside operators working time?
Let s say the machines work along the 3 day shifts and the setup operators only one shift per day.
I thought to use a secondary resource in the setup phase activity or adding a phase with the opertors modeled as a resource to the operation. It adds complexity to a solution the fact that setup times depend upon the setup matrix assigned to the resource so they are variable!
First option was not good because secondary resource cannot present relationship start-start and end-end with the primary resource, moreover, which lead time do we enter in the secondary resource?
Second option was not good either because setup times are variable for all the "special" resources and all of them use the same operators.
CTF

Try mapping the scenario with sub operations and assign the highly skilled labor to the sub operation and machine to the main operations.
Rgs - Vikas

Similar Messages

HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
It might have happened when I was accessing my camera bypassing the lock screen!
All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

Hello !! Because if I talk daily to the dame Person for FaceTime and two are always in the same place, once day face time no prolem speak for another day and I have to use skype for error appearing face time ? Thanks for your answers.

Hello !! Because if I talk daily to the same Person for FaceTime and two are always in the same place, once day face time no prolem speak for another day and I have to use skype for error appearing face time ? Thanks for your answers.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Hi SandyS_VZW,
Yes tried resetting the wifi connection and problem still persist.
Here it is...to make it clear. Connected thru the same wifi at home...
-> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
-> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
Was there a known issue similar about this case?
thanks,

HT1386 I am having trouble synching all 1700 songs that I just put into iTunes Music Match onto my iPod Classic device. It worked on my iTouch and iPad devices but not the Classic. How do I transfer the music successfully

I am having trouble synching all 1700 songs that I just put into iTunes Music Match onto my iPod Classic device. It worked on my iTouch and iPad devices but not the Classic. How do I transfer the music successfully

It should sync the same if the songs are the same. You can try:
- Unsyncing all music and resysncing
- Restoring the iPod
BTW, yo posted in the iPod touch forum

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

Who is your carrier? Are you actually on 3G?
Do you have 3G turned on or off? Settings > General > Network > Enable 3G

Sent boxes in Gmail and in Mail are not the same

Hi, I am using Gmail and Mail in OS X lion. When I send a message through Gmail (on Firefox), the message is not in the sent box in Mail. The sent box in Mail keeps messages sent through only Mail. Is there any way to "synchronize" sent boxes in Gmail and Mail? Thanks,

If you have the Gmail account set up in Mail correctly, you will have the Gmail IMAP folder at the bottom of the Mail sidebar. The Inbox will automatically synced with the Inbox folder, so it won't show up in the IMAP mailboxes.
Highlight the sent mailbox under the IMAP folder, go to the main menu in Mail, click on Mailbox, scroll down to the "Use This Mailbox For", and select Sent. Do the same for others you want to see such as Trash.
Also, select to store messages on the server in Mail preferences under Mailbox behaviors and set you delete time to your preferences.

Is macmini enough for a musician that works with logic pro and 10 plugin softsynth at the same time?

I use to work with a music platform like garageband or logic pro and at the same time I am working with a lot of plugin software like toontrack, ik multimedia, musiclab, native instruments etc. On my PC which has the same specification as macmini i7 2.3GHz this was a big problem especially when I was selecting effects like reverb, chorus or compressor so I had to export tracks all the time. What is the minimum specs that I should have to work without any problem? Any help will be appreciated.

Welcome to Apple Support Communities
For what you want the Mac, the Mac mini is OK. It has got a quad-core processor that will give you the performance you need and 4 GB of RAM that you can extend to 16 GB, apart from a removable hard drive.
The problem is the GPU, but as the applications you are going to use don't require the best GPU, it will work properly. If you want the Mac mini, go for it. An iMac may give you better performance, but the Mac mini is correct.
If you buy it from Apple, you have 14 days to return the Mac mini if it doesn't work correctly with the apps you need

How come the same apps that are available for my iPhone and my iPad are not the same as the apps in the app store on my mac

I want some of the same apps available on my iphone and ipad2 to be available on my macbook pro app store and to be able to link them through icloud. Is this not possible? If not, why not?

The Mac uses Mac OS X and iDevices use iOS. These are two different operating systems and the apps must be written for each operating system specifically, even when the apps go by the same name, such as the iWork apps, they are two ifferent versions of the same app for the two different platforms.
So, as an example, Safari has been written for three different operating systems, Mac OS X, iOS and Windows. And the Safari apps, as similar as they are visually, are not interchangeable for the different platforms.

Time Division Multiplexing and Processing Different Loops at the same time

Hi, I am new in Labview so you may find my questions too silly, sorry about that
I want to design an interface to control the test&measurement devices remotely. I have two desks and there are several devices on these desks. The real problem is to use two different devices at the same time. To do this I heard that I can use time division multiplexing. But I couldn't find enough information about it in Labview. Another advice I heard was to use a matrice and hold the on/off state of the devices in this matrice.
Where should I start the design to create such a system? Do you have any advices? Thank you in advance.
My basic GUI is attached.
Attachments:
InterfaceAli.zip ‏42 KB

As Mike pointed out you cannot communicate in parallel on the GPIB bus - unless you have separate buses for each instrument - and that defeats the purpose of a bus. I am not sure about LXI.
With regard to your VI:
1. Do not use global variables to pass your data around.
2. You should use the Array data type, not the Matrix data type. The Matrix data type in LabVIEW should only be used for matrix mathematical operations (linear algebra) which cannot be easily performed on the array data type. You have many more tools in LV to work with arrays.
3. The Event structure needs to be in a parallel loop. This is basic data flow. If you do not understand this concept, get some training, either though the online tutorials or through a class.
4. Use Value Changed events and place the button terminals inside the event case for that control.
5. The parallel loops need to have a Wait or some other function which causes a delay. Otherwise, the first one to start executing could consume all available processor resources. These are called "greedy loops."
6. Use integer data types for case structure selector inputs. Floating point values are coerced to integers at the inputs. If the values resulted from calculations, unexpected rounding effects may occur, resulting in the wrong case being selected. In some cases using type defed enums may be even better. The underlying data is integer and the enum item names show up in the case selector labels, helping to document what the case does or why it was selected.
7. Remove the timeout case from the event structure since it never executes. Also avoid Use Default if Unwired on the terminal with your matrix (array) data. You never have a situation where an empty array is appropriate.
Before going any further with the program questions, you need to carefully define your requirements. How many instruments will you have? How many can be active at one time? What kinds of communication between the program and the instruments is required? This includes commands to the instrument, data returned from the instrument, error handling, and timing requirements. What will be done with the data? Display, save to file, use to automatically control another device? What safety requirements or constraints need to be met? Once you have a good requirements document, then you can begin to determine what kind of program architecture is best suited to meet the needs.
I suspect that you may be making some things much more complicated than they need to be while ignoring other important issues.
Lynn

Can sun jdk 1.5 for webstart and sapjvm co-exist on the same server?

We just installed PI 7.1. We would like to install sun jdk 1.5 on the PI 7.1 server so we can use the pi tools on the server, but we are not sure if sapjvm and sun jdk can co-exist, or if it's going to cause any problem with PI 7.1, any setting is needed to tell PI which java to use if multiple version is installed? Does anybody know?
Thanks
Jane Zhou

Kaushal,
Thanks for the reply. note 718901 mentioned to change the jdk version, parameter jstartup/vm/home in instance profile can be used. if that's the case, that should be how we tell PI system whch jdk to use? in PI 7.1, it's point to DIR_SAPJVM, which points to sapjvm_5 in \exe directory. The notes you mentioned all apply to versions before 7.1, I'm wondering if it still works the same way with 7.1 systems.
Has anybody installed a sun jdk on PI 7.1? anything that we need to pay attention to?
Thanks
Jane

Adobe Lightroom 4 for Mac and Windows, can I install the same license on both systems or only 1?

I just purchased 1 full license of Adobe Lightroom 4 and I can see there's an installer for Mac and Windows.
does it mean I can install on both systems or my license is only valid for 1?
Thank you
BR,
Lucia

Yes, LR is cross-platform and you can install it on both systems.
Mylenium

My iCloud mail account is messed up. My Apple ID and iCloud ID are not the same. My email address has changed. which I changed in my apple ID, but the iCloud is still referring to my old, non-existand account. Can't guess passwords and it won't le

Bottom line, I can'
t get iCloud messages on my Apple iMac, iPhone or iPad2. I dropped my original email account and went to gmail. I changed my Apple ID to this gmail address on the Apple Store, etc. I've also changed the Apple ID password a few times. This worked fine until this week. I believe I can get game messages (not sure all were delivered), but not iCloud messages. It asks me for the iCloud password, which none work, and then goes back to my old
apple ID and asked for a password. It asks me to reset the password, which I click, but nothing happens. How can I fix this so I know I'm getting all my messages?

Hi rjt,
Sounds like you did not delete the iCloud account on your device before you changed your ID. You will need to do the following:
1.     Sign onto Manage your Apple ID and change your Apple ID back to the old ID (this is temporary - do not verify it, do not change the password): Apple - My Apple ID
2.     Go to Settings>iCloud and scroll to the bottom to delete the account. Use your current password when asked, follow the prompts to complete the deletion
3.     Go back into Manage your Apple ID and change your Apple ID back to the new ID (you may need to verify it again)
4.     Go back to Settings>iCloud and sign onto iCloud with the new ID
Cheers,
GB

Map view and Final DVD dont not the same

Hello all, I have got an interesting problem which is probably due to my ignorance. I have made a project in Final Cut 4.5. In my timeline I have 5 seperate pieces. I place an in and out for each piece and then export Quicktimes (NOT self contained) in order to make my DVD. Ive made a new project in IDVD and use an existing template and replace the backround with my backround
(a still which was made in photoshop) I place each film on the backround, which as I understand it is making its own title set, so far so good. In test mode the menu ive created works great , each title is accessed fine. Now here is the problem.
In map view everything looks to be in the correct order but when I burn the disc and play it the chapters dont play in the order of map view? Again, the menu is correct to each film but when I go to a film and then hit the chapter button to go to next film the films are out of order with the order i put them on the menu?
The reason I did it this way was I did not want the 2 window menu screen you get when , in Final Cut, you make chapters and export with chapters, you cannot as far as I know, in IDVD come back to just the chapter screen after each film. Which is what I wanted to do. Any suggestions? (other than use DVD SP)

I would like to know also. I have made many DVDs, but the number order does seem to be random. For presentation purposes I want to play a specific clip by hitting it's corresponding number on the DVD player remote when the DVD is at a complete stop (so if I put the movie clip in the 2 spot and hit the number 2 on the remote, then the 2 movie clip will play). I can get this to work from the menu by dropping them in iDVD in the order I want and waiting for each to encode before dropping the next, but at a complete stop I cannot ensure number 2 on the remote will play number 2 on the DVD. To me it looks like iDVD gives those numbers in the order in which the audio is encoded when burning, with the shorter clips first and longer ones last.
Can anyone help me?

Hight of ipod and click wheel surface not the same

The highness of surface from my ipod itself and clickwheel is not exactly the same. clickwheel is a little bit higher which is irritating while using it.
I checked some other ipods (5g's) and some have exactly the same level all over the cover which gives a better feeling.
Is it a failure from production or just a question of allowed tolerances?
Any experience with apple support?
ipod video 30gb Windows XP

After a lot of searching and working on this, I found the problem - and it wasn't my previously theorized conspiracy to get us all to buy more from Apple.... It was quite simple actually.
http://docs.info.apple.com/article.html?artnum=304508 I followed all of these directions including re-installing the dlls and the usb drivers, but I think the key was that I have multiple USB devices plugged into my computer. I unplugged all but my wireless keyboard. Then I used a different USB port for my iPod than I had tried before. It updated..... Yeah. I don't have to buy one of the new over priced fancy models!!!!

Available working time for setup and produce activity is not the same.

Similar Messages

Maybe you are looking for