Availiability check switch off

Hi,
a) There are two places where the availability check can be switched off
1) in the config for checking group , we can switch off the  availability not to happen
2)  In the configuration of schedule line level, we can switch off.
what is the difference between the above two modes of switching off AC.
b)  when we switch off availability check, does system assume infinite stock and  confirm schedule lines.
regards

There are two places where the availability check can be switched off
1) in the config for checking group , we can switch off the availability not to happen
2) In the configuration of schedule line level, we can switch off.
what is the difference between the above two modes of switching off AC.
Answer: Switing off the Av Ck at Schedule line level over writes the settings in the Checking Group.
b) when we switch off availability check, does system assume infinite stock and confirm schedule lines.
Answer:
Schedule line will be determined in order based on Item category and MRP. If MRP is no planning, then the schedule line determined will have No Av Ck and the ATP is not checked during order processing and stock gets confirmed itrrepective of the stock available or not.
Hope this information helps.
Regards
Sai

Similar Messages

  • Material availability check be switched off for during dispatching of order

    Hi All,
    Material availability u2013 can the material availability check be switched off during  dispatching of production order but kept when order is created? 
    Is there any implications on availibilty check.
    How can we do this?
    Regards,
    Vidyasagar

    Dear
    If you want to do Material Availablity Check only at the time of order creation , please choose Availability Check Business Function 1  with your order type  /plant combination .Keep No Check  in Capacity  and do not assing  the Overall Capacity Profile Here .
    Where as keep the Capacity Overall Profile for Production Order Type with Availablity Check  -2  and Mark No Check to material availablity  option in the same .
    In OPKP -make sure that you have Capacity Profile assinged and do not mark Confirm Partial Available Qty .
    How ever , in capacity requirement , material availablity is the intregrated part  and while dispathcing production order with in the available capacity of any operation in work centre , system tries to make sure the materials are available for processing just before actual operation starts .
    Check in CM21-Setting-Strategy -Dispatch Control -Check if you have option to un-check the Material Availability .
    Regards
    JH

  • Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

    Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

    Since other millions of people updated and do not have that problem - it means one of two.
    1.Your friends lied to you and do not have that problem and in that case only your installation of ios7 got corrupted and you need to restore your phone.
    2.Your friends didn't lie to you and all 4 of you need to restore phones (that way reinstalling ios 7 properly)
    here are instructions for restore and you may have to backup before restore.
    iTunes: Restoring iOS software - Support - Apple

  • Application Express XE Installation: Switch off Swap Check

    Hello
    I am trying to install XE into a Parallels Container 6.7 (VPS).
    I have created the container Oracle Linux template.
    Oracle XE requires a SWAP setting. In a Parallels Container installation you cannot set a SWAP ... That on the service hardware.
    Look through the forums I can see you can switch off the Swap Check for a full Oracle Linux installation
    http://forum.parallels.com/showthread.php?t=90411
    Does anyone know how "switch off" the swap check in XE?
    Thanks, Pete

    Hello
    I just found the solution ... In Parallels Containers 6.7 the Swap parameters is now available
    vzctl set xxx ram 4g swap 2g --save
    Hope this of use?
    Pete
    Edited by: Pete88 on Dec 29, 2012 12:45 AM
    Edited by: Pete88 on Dec 29, 2012 12:45 AM

  • Solution to switch off Postal code checks for countries Denmark and Norway

    Client wants to switch off this functionality as the Postal codes in SAP are not updated.
    The user should not have any difficulty in keying Postal codes and the City. The system should not check and must save the entries typed by the user
    What are the possible ways of doing this? please help
    Thanks
    Jegadish

    Thanks. OY17 for Denmark and Norway is unchecked already
    There should definitely be a way in SAP to allow the user to enter the postal code and city
    V_005_B is already unchecked
    for denmark , sytem picks up postal code from Table -T5M8T.. how do I control the sytem not to check this table?
    any help would be highly appreciated
    Thanks
    Jegadish
    Edited by: J Jegadish on Feb 21, 2010 12:01 PM

  • Switch off availibilty check in transaction COHV

    Hi All,
    I want to Switch off availibilty check in transaction COHV while converting planned order tp production order.
    Can any one know procedure?
    Thanks,

    Hi,
    Yes you can block availability control checking from OPJK tcode.
    In OPJK you will find 2 business function one is availability check in creation time and second  one is for release time..
    Select go to detail in material availability tab there are option u can activate and deactivate availability control
    Arun

  • My imessage stopped working over the wknd when I went to check if it was on it had switched off on its own. Now I try to turn my imessage back on and its giving me some kind of server error. Any suggestions?

    My imessage stopped working over the wknd when I went to check if it was on it had switched off on its own. Now I try to turn my imessage back on and its giving me some kind of server error. Any suggestions?

    Ok actually my mistake it says "an error occurred during activation. try again" I spoke with apple tech support right now and she mentioned they are having trouble with there servers.  Do you by any chance know what the restrictions area means? Should that be activated or deactivated, does that make a difference?

  • Writing in pages in Afrikaans. Spellcheck keep on correcting to dutch. Switched off spell check and checkeed keyaboard settings. Where do I get languages other than what Apple offer and where is the dictionary, Library, spelling files.

    Writing in pages in Afrikaans. Spellcheck keep on correcting to dutch. Switched off spell check and also looked in System preferences - keyboard. this stops the "Auto-correct" but does not help me with Afrikaans or other language spell check.  Where do I get languages other than what Apple offer and where is the dictionary, Library, spelling files.

    You are basically limited to what Apple deigns to offer.
    Try LibreOffice [free] which has a huge selection of languages.
    Peter

  • Am using provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down bef

    I  am using 2 unit provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down before continue to charge my iPad mini again. Of course it will be 100% charge but must make sure the AC charger is cool down completely. 
    I feel that the provided AC charger that is not suitable for our charging on iPad mini.

    I would book an appointment at an Apple Store, if you have one nearby, to have it looked at.
    Genius Bar: Preparing for Your Apple Store Appointment

  • Hi i am from india and i am using iphone 5 but i have problem with charging last 20 % suddenly my phone switched off every day and som heating when i am using internate pls help me where i can check whether my phone waranty is valid on expire

    hi i am from india and i am using iphone 5 but i have problem with charging last 20 % suddenly my phone switched off every day and som heating when i am using internate pls help me where i can check whether my phone waranty is valid on expire

    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • MacBook Pro keyboard backlight not switching off

    I recently bought a 13" MacBook Pro (2012, 2.9GHz i7) and it came with Mountain Lion preinstalled. The keyboard backlight isn't behaving as I had expected: when the "Adjust keyboard brightness in low light" option is checked, it does indeed adjust the brightness of the backlight when ambient light levels change. However even when the ambient light is VERY bright (desk lamp shining down) the backlight doesn't switch off; instead it just goes to full brightness. I understand that the backlight usually dims in dark conditions to save battery, but why would it go bright when the keyboard is fully visible without a backlight? Is there a way to make the keyboard backlight go off when there is plenty of background light and come on when the environment is dark?
    Thanks in advance for any advice.

    Auto brightness operation usually works in the way yours is working.  It is dimmer in very low light and progressively gets brighter as the ambient light increases.  There are cases where this is actually helpful as in wierd backlighting situations.
    You can override in the System Settings and from the keyboard "function" keys.  I'm not at my MBP right now, but I think the keyboard backlighting controls are somewhere near F5 and F6.

  • My usb keyboard is no longer detected after the power was switched off

    I sometimes relocate my Imac to another office and after the power has been switched off the computer no longer detects my usb keyboard.
    This had happened several times now and sometimes it all of a sudden starts working again after a couple of hours (but it doesn't now).
    The computer keeps searching for a wireless keyboard which I don't have. I have tried everything from switching off power again to reboothing, but nothing works. I have checked all USB ports with other devices and they all work. The problem is not the keyboard itself, because it does work when I plug it in to my MacBook.
    Anyone recognize this?

    Yes, to a blue tooth mouse only. I have tried disabling the blue tooth connection, but when i restart my computer it automatically connects again.
    I got the keyboard to start working again now by pressing all the keys one by one (in order to discharge them, read that somewhere). I helped. But how annoying is that?!

  • Mini suddenly cuts / switches off

    Hi,
    I own a Mac Mini (1,42GHz, 1Gig ram) and recently it's done some strange things. While working it suddenly switched off. It was like somebody just cut the power. I pushed the button to turn it on again and the led would only appear for about 1s before the mini cut off again. When waiting for about an hour leaving it switched off it worked again, but only for a few minutes. My first guess was a problem with the overal power (bad contact or something) so I tried the mini in another plug and in another house, but the problems continued. I couldn't run the hardware test since it kept cutting off before it could complete any test.
    Then I decided to visit the local Apple store (not a 'real' one as it's a shame they don't exist in Brussels, but a certified reseller). I wanted to ask them if they could try it with a different power supply as that might be the issue. However, since I bought the mini from the online Apple store and not their store they weren't allowed to test it unless I brought it in officially, paid them, would pay them more if they couldn't find anything and they would send it to Apple for repair.
    So I decided to call Apple first and they had never heard of the problem. I reset the PMU (?), tried some stuff, but nothing worked. They told me to go through the local store to get it sent to them if the problem persisted. So the next day I wanted to reproduce the problem before going to the store to show them right away and the mini worked for about 5 hours straight. It seems the longer I left it switched off, the longer it work afterwards. When waking up from a sleep it crashed again. Then I thought it wouldn't turn on again like it did all the time the day before. However it ran perfectly for 2 whole days. Since the mini is pretty essential for my studies I gave it another try and decided not to bring it in. I was able to run the hardware test which told me everything's ok.
    Right now it works pretty well, but it still suddenly cuts off every once in a while (about once a week). Did anyone ever have this problem before or has a hint on how to prevent this from happening? Would it be better to bring it in for repair anyway? My fear is that they'll leave it on for a week, see that it works perfectly and send it back saying there's nothing wrong with it. In case nobody knows what to do I did think it would be a good idea to post the problem here anyway to make it known.
    Greetings and sorry for the long story .
    Edward.

    Only valid entry in Apple's Error Codes List for -127:
    -127 = fsDSIntErr /*non-hardware Internal file system error*/
    You have probably seen the -93 (or was it 96) and -122 PMU codes, but 127 is a first for anyone it seems, even Google won't find a -127.
    The -93/96 remedies were mostly centred around PMU resets.
    The -122's were a little bit more involved. A Googled report lists the local Apple Store saying it would need a logic board replacement. The user was a bit miffed when 5 days later his machine is ready to be picked up and only the battery was replaced. It PMU forced shutdown -122 again after arriving home. He bought a conditioning UPS and plugged his Mac into that and so ended the report. No further information available on if it solved the problem or not.
    Add to that users shutting down and running DiskWarrior/TechToolPro checks of the hard drives as all the -12x error codes are file system related. However when I grep'd the headers list of CarbonCore for -93 it is a network bridging error, and -96 is a Serial port not powered error, so I have doubts that the PMU is using the standard Mac error codes list.
    Apple's own online support database is mysteriously silent on any PMU forced shutdown entries.
    Jan J.

  • Windows 7 hangs and switches off network access

    We are running a Windows 7 Ultimate 32-bit operating system as our server.
    About on 30 minute intervals the computer hangs and switches off network access.
    If the computer is in this state and you try and access it from another computer nothing happens.
    While in this state you can see the desktop indicating that it's not in sleep mode.
    The problem is rectified by click the mouse on the computer.
    It has not gone into a sleep mode as everything on the power options is set to never.
    Please help?
    Regards,
    Andries Malherbe
    Vizier Systems

    About on 30 minute intervals the computer hangs and switches off network access.
    If the computer is in this state and you try and access it from another computer nothing happens.
    Could you plaese share more information about "switches off network access" with us? I don't quite understand this situation
    Please also check the event viewer to collect related information about this issue when you re-use the Windows 7.
    Meanwhile, Please update the driver for network adapter or reinstall for a test.
    Regards
    Yolanda
    TechNet Community Support

  • How to switch off 'crop' edit in many images at once?

    I know how to lift and stamp to apply edits to several selected images at once. However, if I have cropped many images within a project in different ways, then want to switch off the crop on all of them, is there a way? Without laboriously going through one-by-one and un-checking the 'crop' box?
    Likewise is it possible to apply auto-exposure to many images (batch process)? When stamping, it applies the exact same exposure change from the lifted version, but different images require different exposure compensations of course.

    1 - yes, on one image leave the crop box checked and click the circular arrow (reset) ... this has the crop enabled but no crop ... then L&S that adjustment to all the ones you want, you just reset the crop on all of them ...
    2 - no ... with the auto adjustment it creates an adjustment ... when you L&S that adjustment, that is what you get, that specific adjustment ... you are one of hundreds that want that and ask for it here ... use the feedback menu option to send feedback to dev team ... or use http://www.apple.com/feedback/aperture.html

Maybe you are looking for