Availibility check for sales orders created simultaneously

Hi SD experts,
When a sales order is being created with an item "A", while a second sales order is being created too, at the same time, with the same item "A", the system can't carry out the availibilty check.
It displays the following message : "The material A (plant M500) in item 000010 which you entered for processing is blocked for another transaction. The system is therefore unable to carry out either the availability check or the transfer of requirements."
This is quite logic... But for example for a call center where the operators create orders simultaneously how can we make it possible??
Any suggestions please ?
Thank you,
Bahia.

Hi there,
In SPRO -> SD --> Basic functions --> Availability check & TOR --> Avaliability check --> Avaliability with ATP --> Define material block for other users.
Here you make the settings for different availability check types 02 for individual requirements etc. If you check the field Block, system will block the material for other remaining sales orders if availability check is being carried for one sales order. It is set at plant level. If same material is available at other plants, it will be available there.
Regards,
Sivanand

Similar Messages

Availability check at Sales Order Create

Dear Experts,
I want to do availability check at sales order creation stage (VA01). My requirement is, the system should check the sales order line qty against the unrestricted stock. And if sufficient stocks not available it should prompt an error message.
In more detail; unrestricted stock of material X is 100 PCs. I put a sales order for the same material for 101 PCs. Then systems should block me from saving the order.
Can some please provide me detailed step-by-step action for configuration of above scenario. Thanks in advance for your support
Regards,
Ramindu

HI,
User exits in program FV45VFZZ
USEREXIT_ADD_FIELD_TO_HEADER
USEREXIT_ADD_FIELD_TO_LINE
User exits in program FV45VFZY
USEREXIT_DELIVERY_GROUPS
USEREXIT_MVERF_INIT
USEREXIT_QUOTA_KEY_VALUE
User exits in program RV03VFZZ
USEREXIT_AVAILABILITY_IN
USEREXIT_AVAILABILITY_OUT
USEREXIT_DARA_REFRESH
USEREXIT_PLANT_SELECTION
Check these user exits also very helpful to you.
Regards,
kishore.

Availability check for sales order stock

Hi,
We use sales order stock in sales order which creates purchase requisition automatically.Movement types for GR 101E, for GI 601E. Material master data has on MRP2 view as GR processing time 2 days for example. I create sales order with requested delivery date today.After saving SO, PR is created and I create PO with delivery date today and post goods receipt document for today. System gives as confirmation date today + 2 days. although the material is in stock.
We use also project stock in sales order which creates purchase requisition automatically.Movement types for GR 101Q, for GI 601Q.I run the same scenario for the same material. As soon as I create the purchase order system confirms the open quantity in sales order for today. (Scope of availability check is the same for both sales orders and includes PO)
What can be the reason?
Thanks

Hi Murat,
i guess the problem is with the 'Check without RLT' indicator' in Availability check control. For the MTO (checking rule AE) i guess this indicator is not set but for the Project systems (Checking rule PS) this indicator is set. This makes the difference. Do the changes as desired in transaction OVZ9.
Please check and revert back if you are still facing the same problem.
regards,
Kathir

Availability check for Sales order

Hi Experts,
I have material say 100199 in which I maintain In house production time as 10 days.
Now I have to create Sales Offer for this material and system check availabity and give delivery date for Offer from Inhouse production time maintained.
Problem is this In house production time is independent of Order quantity so system will give same delivery date irrespective of quantity in sales order.
I want system should propose me delivery shedule from master data maintain
i.e if order is of 120 qty then system should propose and for 30 lot i requires 3 days to manufacture.Order creation date is 09/12/07
30   12/12/07
30   15/12/07
30   18/12/07
How I can achive this in SAP?

Hi Lalit,
You can give Lot size dependent In house Production stimes in Work Scheduling View of Material Master. You can do it in MM02. Wish this solves your problem.
Regards
Krishna

Availability check of sales order in planning strategy 40

Dear friends,
Kindly help me this query:
From online SAP help in Demand Management, it said in planning strategy 40:
"An accurate availability check is performed according to ATP (available to promise) logic during sales order processing. The system checks whether sufficient planned independent requirements have been planned to cover the sales order.... If there is insufficient coverage of components (the sales order quantities exceed the planned independent requirement quantities), the sales orders cannot be confirmed"
According to above paragraph, I think that availability check of sales order is carried out against PIR, if PIR quantity cannot cover sales order quantity then order will not be confirmed, it also means stock on-hand will not be included in availability check. However, my testing reveal a different conclusion: sales order is confirmed against stock on-hand, not PIR. My questions are:
1/ in planning strategy 40, how does system carry out availability check for sales order?
2/ how to interpret above help from SAP?
I got that help from this link: http://help.sap.com/saphelp_erp60_sp/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
Many thanks for your clear answers.
Regards,
Duc.

Dear duc pb ,
In 40 its only ATP that works.
you can do another test ,
Create PIR 15 quantity.
Create a stock of 10 quantity.
and now create a sales order firszt of quantity 30, as both of the above after combining cant fullfill this demand, save order run MRP.
system will create orders against PIR (15) and remainibnbg quantity of sales order (5)
run one more test, by creating PIR 15 quantity , no stock and a sales order of with quantity 10.
share your findings.
Thanks
Ritesh

Availability check in sales order for DIEN materials.

Hello,
Is it possible to make availability check in sales orders for a service material e.g.: type DIEN? How can i customize it?

The DIEN material type is not stock managed, so it does not make sense to check the availability. If you need to do something similar you could use material type UNBW, this material is quantity managed but not valuated, so maybe this can help you !
Regards
Roberto Mazzali

Disable Availability Check on Sales Order But Activate on Outbound Delv

Greetings all experts !
Currently, there's a new request to create a new processes whereby during the sales order creation, no availability check will be in place but material will still be posted to production planning ( TOR ).
Availability check instead should be activated during the creation of outbound delivery.
I have already configured in such a way that the relevant sch line item ( VOV6 ) - availability check is unchecked and TOR is checked.
But during creation of sales order, availability check is still in place for material specified.
I have check on the necessary requirement class and requirement type settings. Fyi, requirement class used - availability check is ticked. Could this be the reason even though i have disabled availability check on sch line ?
I have tried to untick the availability check setting in requirement class ( OVZG ), and while this can disable the availability check in Sales order, but that configuration will also disable availability check in outbound delivery.
My queries :
1 ) What are the configurations that I need to look into to cater to the above request. To disable availabilty in sales order but instead, run availability in outbound delivery ?
2 ) Is there any way I can disable the availability check on based on sales order type using userexit or function module ?
3 ) Is there any additional function module/bapi/userexit that i can implement to force outbound delivery to run availability check ?
My apologies for such lenghty message here but really really need some valuable feedback here as I'm totally at lost with the new requirement for now.
Many thanks in advance.
Warmest Regards,
Edie O

In SPRO
goto SD>Schedule line>Define schedule line categories
here check if the schedule line category associated with your mentioned order has a flag ticked for Availability.
Availability check for sales
You must carry out an availability check for the following transaction.
The indicator is determined as a proposal in conjunction with the respective requirements type. It can be changed in individual shipping transactions. However, only one restriction is effective.
Example
You do not set an indicator for maintaining the requirements type. In this case, no availability check is carried out. This is independent of the selection in the respective transaction.
You set an indicator for maintaining the requirements type. In this case you can decide whether or not you require an availability check for the relevant transaction.
reward points if it helps
regards
Biju

User exit in ATP Check for sales Order to trigger notification

Hi All
please let me know is there any user exit after ATP check or in ATP check for sales order to trigger a notication mail.
Regards
Kishore

Hi,
User Exits For Availability Check are given below:-
The user exits named here are planned for projects that are to be carried out in agreement with SAP development as they may only be used in consultation with SAP.
USEREXIT_PLANT_SELECTION in program RV03VFZZ is an exception to this rule (see below).
User exits in program FV45VFZZ
USEREXIT_ADD_FIELD_TO_HEADER
USEREXIT_ADD_FIELD_TO_LINE
User exits in program FV45VFZY
USEREXIT_DELIVERY_GROUPS
USEREXIT_MVERF_INIT
USEREXIT_QUOTA_KEY_VALUE
User exits in program RV03VFZZ
USEREXIT_AVAILABILITY_IN
USEREXIT_AVAILABILITY_OUT
USEREXIT_DARA_REFRESH
USEREXIT_PLANT_SELECTION
This user exit is used to adjust the flow during plant transfer. A list of permitted plants, where this material is created, is determined and checked in the standard R/3 delivery. A dialog box appears where you can select the plants. The user exits allow you to modify the plant table so that plant selection takes place in advance for every flagged selection and a dialog box becomes unnecessary.
regards
Vivek.

Changing Availability Checks in Sales orders

hi there,
Can i easily change the Availability Check in a sales order?
i have 5 sales orde rtypes, and I sometimes want to change the Availability Check, how can i manage this?
thanks

There are three types of availability checks
1. Availability Check with ATP Logic or Against Planning
2. Availability Check Against Product Allocation
3. Rule-based Availability Check
For ATP logic, the Checking group and Checking rule combination determines the availability check parameters. The checking group is maintained in the material master, and not to Sales order type. Hence you can control by having different groups attached to different materials.
If you have Advanced Planner Optimiser (APO) then you can use the Rule based availability check. You can attach a Business transaction to a Sales document type and thus control the availability check in sales order level also.
Refer the below extracts:
Define business transaction
Path : spro -- img -- sd -- BF -- Av chk and TOR --- Rule based availabilty check
In this step you can define the business transactions. These transactions must also be available in the APO planning system. Here the availability check control is carried out for the transactions.You can find the business transactions in the APO planning system (Field BPROC) under:
Global ATP -> Settings -> Rule-based ATP -> Conditions -> Assign rule strategy.
Assign business transaction to sales order type t code VOV8
In this IMG activity, you assign the actions you defined previously to the order types. This activates the availability check settings for this order type, that were maintained in the APO planning system.
Regards,

Function module which uses both BAPI's for sales order create and change

Please name the function module which uses both BAPI's for sales order create and change.
BAPI_SALESORDER_CREATEFORMDAT2
BAPI_SALESORDERCHANGE

Yup.
you must write a piece of code for this.
with if else condition.first check if SO is exsist than use second FM to change it else create new SO from first FM.
logic somethig like this.
Amit.

Need code for sales order create report using bapi's

need code for sales order create report using bapi's

Hi,
Go through below link
http://www.saptechies.com/bapi_salesorder_createfromdat2/
Reward points if it helps,
Satish

Material availability check for production order

Hello,
Is there any functional module to check the material availability of production order. So that it can be used in developments.
Regards,
Ganesh

Hi,
Following are the available Function Modules for avaibility checks in Production orders,
BAPI_PRODORD_CHECK_MAT_AVAIL - BAPI: Execute Material Availability Check for Production Orders
And for Process Orders,
BAPI_PROCORD_CHECK_MAT_AVAIL - BAPI: Execute Material Availability Check for Process Orders
Regards,
Dhaval

Is there a Business Object for Sales Order Create and Change VA01 and VA02

Hi experts -
I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
Thanks,
Mark

Hi Mark,
I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
- Subhodeep
Edited by: Subhodeep on Aug 29, 2009 11:14 AM

Throw Information message for sale order created with value less that 5$

Hi all,
I am basically an abaper, I have got a requirement in SD. The requirement is any sales order created with value less that 5$, should be prompted with an error message saying the minimum order value should be more than 5$. Could any one help me on this.
Thanks in advance,
shiv

userexit_save_document_prepare,main program - sapmv45a, issue an error message if your document value is less than 5$ (VBAK-NETWR) but check if your order has any non-rejected item, I would not issue this message if all items are rejected:
loop at xvbap where updkz ne 'D' and abgru = ' '.
exit.
endloop.
if sy-subrc = 0. "-you have at least one non-rejected, non-deleted item.
NOTE: sapmv45a works NOT only for orders, so please check document types in your logic which are relevant to your messge only (VBAK-VBTYP and/or VBAK-AUART).

Availability check on Sales order creation

Dear Gurus,
I'm trying to set the availablity check on Sales order creation VA01. I need to do this on saving the order. it there an SPRO for this. please help me out on this occation.
many thanks..

Hi
If there is a stock of 1000 in unrestricted and if you have included sales requirements in OVZ9 (made a tick sales requirements in inward and outward movement) then if you create a order customer X with 100 quantities of that same material stock will be reserved for that customer X with 100 quantities
But if you check in MMBE there wont be any reduction still it will be 1000 only
If that order is delivered and pgi done then only In MMBE stocks will become 900
To have a very proper reservation for that customer it is better to go to t code MB1B movement type 412 E and that will reserve stocks for him with proper material document(reserving for sales order)
If you do that unrestricted becomes 900 and sales order stocks become 100 in MMBE
In case 1 there is chance of your 100 quantities can be reallocated to another customer thro back order processing
In case 2 it is not possible it will be for that order only
Or if you create delivery and dont do PGI then stocks will be reserved for that delivery
But to have stocks reduced from MMBE you have to do PGI
Regards
Raja

Availibility check for sales orders created simultaneously

Similar Messages

Maybe you are looking for