Availiility check without RLT

Hi,
the system always confirms stock in sales order when availibility check is with RLT since it assumes it will have stock at the end of RLT
what happnens when availibility check is done without RLT in sales order. does it confirms stock in sales order. if yes then how it confirms.
regards
sachin

Hello, thanks for ur reply to my previous question on Availibility check without RLT. can u pls answer the follwoing.
I have a scenario where i make a sales order for 100 pcs on 23.8.08. the delivery date to customer is 01.09.08 and the material availibity date calculated by system is 28.8.08(01.09.08 less transit time less pick pack time).
when the system does the availibilty check for the material on 23.08.8, it found no stock. yet my system confirms the schedule line for delivery date of 01.09.08.( obviously it is becasue availibility check includes RLT). what is the relevance of the scope of ATP check, i.e. opening stock, incoming purchases and outgoing sales orders. what happens when we check incoming PO and outgoing sales orders in scope of atp check. if my opening stock is 50 pcs and  incmoing stock is 60 pcs and outgoing sales  order (excluding this one i have used as an example) is 10 pcs, i think 100 pcs of my sales order can be confimred. if this is so, what is the point of having a check with RLT, since the system uses the above incoming PO+outgoing SO for atp check
is there any connection between checking the incoming PO and GR processing time in material master ?
i think the stock which gets confirmed in sales order, the stock is locked for that sales order. and if a new sales order is made, then the availabl qty  for this new sales orders gets reduced beaucse there is a check in atp for the outgoing sales orders. ami i right ??
even if the required stock is already available in plant and the the schedule line is confirmed in sales order, do the sales order is being shown in MD04 or the sales order is shown in MD04 only for those quantities which requires production
how the information is transferred to production department that material should be ready by 28.08.08.( material availibity date). what if the production department is not able to produce the material by 28.08.08
when the production manufactures the material, how it is attached to the sales order
what is the point of doing availibity check in deliveries.
regards
sachin

Similar Messages

  • Check without RLT (Replenishment Lead Time) not working as expected

    Dear All.
    We're seeing a sales order ATP situation for externally procured materials, in wihch RLT is not checked.  Or at least we've flagged the checkbox in atp config to not include RLT. 
    However, RLT is still picking up the planned delivery time and GR time.
    And if I blank out the GR time and planned delivery timie, then it just confirms it.
    It acts like RLT is still being used in the check even though RLT is turned off in the availability control (OVZ9)?
    Ideas?  Anyone see something like this?  Does it only work on internally procured materials?
    Many Thanks!!!

    RLT is turned off in the availability control (OVZ9]
    Make sure, the box is checked in OVZ9 to avoid RLT in the availability check. You can do more analysis, by highlighting the sales order line item, then clicking the display availability button. In the next screen click on scope of check button, which shows the OVZ9 details.
    Did you check other parameters like Route, pick/pack time?
    Regards,

  • Availability check in sales order without RLT

    Hi Gurus,
    System always confirms stock in sales order when availability check is with RLT since it assumes it will have stock at the end of RLT.
    I want to know that what happens when availability check is done without RLT in sales order. Does it confirm stock in sales order? If its confirmed then how it will be confirmed
    Thanks
    Vimal

    Dear Vimal,
    If the stock is available system will confirm the availability. Otherwise, you need reconfirm the order once the stock is updated. You can do this using rescheduling or back order processing.
    If you want the system to check the replenishment lead time, you should make sure that you have entered a value in at least one of the following three fields in the material master:
    GR (goods receipt) processing time (Purchasing view)
    Planned delivery time (MRP I view)
    GR processing time (MRP II view)
    Otherwise, the system confirms every requirement.
    Hope this suffice,
    Pl award marks if this is satisfactory or ask for more details!
    Mukhraj

  • Cannot Create Delivery without RLT

    Dear All
    I do not want to create Delivery unless inventory is available. So I have controlled it through Checking rule B, doing it without RLT. But Cheking rule A in Sales Order is with RLT so that I can confirm Customers Order.
    I have a strange Scenario.
    My Stock is 60. Sales oreder created for Today is 5 qty, so Confirmed Schedule line.
    Sales order with Schedule line date 31.12.2008 is 200 qty. So this is confirmed after end Lead time.
    But When I create Delivery it does not let me beacsue 60 stock available is now  booked for Sales order 31.12.2008.
    I know the reason that in Delivery creation RLT is not taken into consideration.
    But How this situation should be handled. If I do delievry ATP check with RLT then there are chances that Delivery may be created without stock.
    Experts opinions are invited.
    Regards,
    Neeraj Srivastava

    Hi christine,
      You can create delivery with quantity 0. But you need to customize at the delivery item category level. Once you complete this customizing system will allow you to create delivery with qty 0.
      If you would like to have the do the PGI, when the stock is available, then you need to configure Availabilty check at shipping level. Once you run the availabiltiy check in VL02N transaction, based on the ATP calculation, system will confirm the qty.
    Regards,
    Ravikiran Pochiraju

  • OO ALV validation check without event DATA_CHANGED and results via popup

    Hi Gurus,
    I'm working on SAP ECC 6.0 and I'm facing a problem during the ALV validation check. My requirement is to show an ALV with one editable field. In addition I have to pre-initialize this field in order to give a reference value to the user, but this is not always correct, or better, this field represent the maximum amount available, but, because of other validation checks, this field is not always correct (and it's ok, it's not a problem), and if it is greater than another amount I have to display an error.
    I was thinking about catching the event DATA_CHANGED and do the checks inside of it. It works but not completely, because if the user do not change anything the event is not raised and I cannot do my checks.
    My solution is to do the checks without catching the DATA_CHANGED event and display the errors in a separate popup window.
    The checks are ok, but I have problems during the displaying of the results: I would like to use the class CL_ALV_CHANGED_DATA_PROTOCOL in order to display the errors, I tried creating the Object:
      Data: go_Error Type Ref To CL_ALV_CHANGED_DATA_PROTOCOL.
      Create Object go_Error
        Exporting
    *      i_container =
          i_calling_alv = go_0200_Alv
    giving it a reference to the ALV (the go_0200_Alv is my CL_GUI_ALV_GRID object).
    Then I did many Call Methods to the Add_Protocol_Entry to add the message in the protocol and then display them calling the Display_Protocol Method of my "go_Error".
    The Popup is shown and the "links" to the ALV are correct (if I double click a message it selects the corresponding row of the ALV, but (and it's my problem) I cannot see the Description of the Column with the error: the popup window is an ALV grid itself with 3 columns ("Message Type", "Name of the Column" and "Message Text") where I can see correctly the Message Type and the Message Text but not the name of the column.
    Debugging the code I found that If I catch the event, the parameter er_Data_Changed (the class CL_ALV_CHANGED_DATA_PROTOCOL) is filled with some other informations like Modified Rows and other attributes like FieldCatalog, Row-ID, so I thought the problem was related to that, and that's why I replicated the whole case in my processing, filling every table I would see if I use the "standard way" for validation. Bu it didn't correct the error. I still don't see the name of the Column.
    This is my code, it's only the part interested, If you need other informations, please ask me and I will copy them.
    form CHECK_ALV_0200_0110 Changing pc_Error Type Char01.
      Data: lt_MatchK1 Type tp_Matches1_Key_t,
            l_Message  Type Char100,
            l_MessX    Type String,
            l_QtaRes   Type ZDM_AMT_ASSIGNED,
            l_QtaAcc   Type ZDM_AMT_ACCRUED,
            l_QtaStep  Type ZDM_AMT_ASSIGNED.
      Field-Symbols: <fs_Table>    Type Standard Table,
                     <fs_Master>   Type Standard Table,
                     <fs_Mod_Cell> Type LVC_S_MODI,
                     <fs_Line>     Type Any,
                     <fs_Field>    Type Any,
                     <fs_Any>      Type Any.
      Data lt_Matches_Alv_Mod Type tp_Matches1_Alv_t.
      Data ls_Modi Type LVC_S_MODI.
      Data: l_Row_ID Type I,
            l_Tabix  Type I.
      Field-Symbols: <fs_Match_ALV> Type tp_Matches1_Alv_s.
      Free go_Error.
      CREATE OBJECT go_Error
        EXPORTING
    *      i_container =
          i_calling_alv = go_0200_Alv
    * Validation Checks
      Clear pc_Error.
      Clear ls_Modi.
      Loop At gt_Matches1_Alv Assigning <fs_Match_ALV>.
        l_Tabix = Sy-Tabix.
        Check <fs_Match_ALV>-Status Eq con_Status_Temp.
    *   Set the Modified Row for the CL_ALV_CHANGED_DATA_PROTOCOL object
          Append <fs_Match_ALV> To lt_Matches_Alv_Mod.
          Add 1 To ls_Modi-Row_Id.
          ls_Modi-FieldName = 'AMT_DEDUCTED'.
          Write <fs_Match_ALV>-Amt_Deducted To ls_Modi-Value Currency <fs_Match_ALV>-Waers.
          Condense ls_Modi-Value No-Gaps.
          ls_Modi-Tabix = l_Tabix.
          Append ls_Modi To: go_Error->mt_Mod_Cells,
                             go_Error->mt_Good_Cells.
          l_Row_ID = ls_Modi-Row_Id.
        Clear l_Message.
        If <fs_Match_ALV>-Amt_Deducted Eq 0.
          pc_Error = con_X.
          CALL METHOD go_Error->Add_Protocol_Entry
            EXPORTING
              i_msgid     = 'ZDMV'
              i_msgty     = 'E'
              i_msgno     = '005'
    *          i_msgv1     =
    *          i_msgv2     =
    *          i_msgv3     =
    *          i_msgv4     =
              i_fieldname = 'AMT_DEDUCTED'
              i_row_id    = l_Row_ID
    *          i_tabix     =
          Continue.
        EndIf.
        Case g_Dynnr.
          When '0110'.
            Perform Get_ResQtaDispute1 Using lt_MatchK1
                                             <fs_Match_ALV>
                                       Changing l_QtaRes.
            Perform Get_ResQtaAccrued1 Using <fs_Match_ALV>
                                       Changing l_QtaAcc.
    *      When '0111'.
    *        Perform Get_ResQtaDispute2 Using lt_MatchK2
    *                                         <fs_Match_ALV>
    *                                   Changing l_QtaRes.
    *        Perform Get_ResQtaAccrued2 Using <fs_Match_ALV>
    *                                   Changing l_QtaAcc.
        EndCase.
        Add <fs_Match_ALV>-Amt_Deducted To l_QtaStep.
        If l_QtaStep > l_QtaRes.
    *     Store the Error
          pc_Error = con_X.
          Write l_QtaRes To l_Message Currency <fs_Match_ALV>-Waers.
          Condense l_Message No-Gaps.
          CALL METHOD go_Error->Add_Protocol_Entry
            EXPORTING
              i_msgid     = 'ZDMV'
              i_msgty     = 'E'
              i_msgno     = '002'
              i_msgv1     = l_Message
    *          i_msgv2     =
    *          i_msgv3     =
    *          i_msgv4     =
              i_fieldname = 'AMT_DEDUCTED'
              i_row_id    = l_Row_ID
    *          i_tabix     =
        EndIf.
        If l_QtaStep > l_QtaAcc.
    *     Store the Error
          pc_Error = con_X.
          Write l_QtaAcc To l_Message Currency <fs_Match_ALV>-Waers.
          Condense l_Message No-Gaps.
          CALL METHOD go_Error->Add_Protocol_Entry
            EXPORTING
              i_msgid     = 'ZDMV'
              i_msgty     = 'E'
              i_msgno     = '002'
              i_msgv1     = l_Message
    *          i_msgv2     =
    *          i_msgv3     =
    *          i_msgv4     =
              i_fieldname = 'AMT_DEDUCTED'
              i_row_id    = l_Row_ID
    *          i_tabix     =
        EndIf.
      EndLoop.
      If pc_Error Eq con_X.
    *   If there was at least one error, Display the Popup
        go_Error->mt_FieldCatalog[]   = gt_0200_FCat[].
        go_Error->ms_Layout-Zebra     = con_X.
        Get Reference Of lt_Matches_Alv_Mod[] Into go_Error->Mp_Mod_Rows.
        CALL METHOD go_error->display_protocol
    *      EXPORTING
    *        i_container        =
    *        i_display_toolbar  =
    *        i_optimize_columns =
      EndIf.
    EndForm.
    Do you know if there is a particular issue about that? Or, maybe, I'm doing something wrong...
    Please help me
    Regards,
    Claudio
    Edited by: Claudio Distrutti on Oct 31, 2008 12:38 PM

    Hello Claudio
    Nobody prevents you from calling your event handler method go_grid->HANDLE_DATA_CHANGED directly!
    What do I mean with that?
    I assume you are calling method go_grid->CHECK_CHANGED_DATA at the beginning of the PAI module to catch any changes from the editable ALV grid. Within the event handler method you do your validation and send the error popup if necessary.
    Now when the user closes the error popup and pushes e.g. the SAVE button then I can happen that method HANDLE_DATA_CHANGED does not trigger event DATA_CHANGED because nothing was indeed changed on the ALV grid. Yet the invalid value is still there.
    However within the FORM routine for saving the data you can just call your event handler method directly:
    FORM save_data.
    CALL METHOD go_grid->handle_data_changed
        EXPORTING
    *      er_data_changed =
          e_ucomm = 'SAVE'.
    ENDFORM.
    Now within your event handler method you always know when the method was called because if method CHECK_CHANGED_DATA triggers event DATA_CHANGED the IMPORTING parameter ER_DATA_CHANGED is bound whereas it is empty when the method is called from your SAVE routine.
    METHOD handle_data_changed.
      DATA: lo_log   TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
        IF ( er_data_changed IS BOUND ).
          lo_log = er_data_changed.
        ELSE.
          CREATE OBJECT lo_log.
        ENDIF.
    " Do the validations and send error log if necessary
      lo_log->DISPLAY_PROTOCOL( ).
    ENDMETHOD.
    Regards
      Uwe

  • How to use spell checker without mouse?

    Hi,
    how to use spell checker without mouse?
    And how to quickly change between languages related to documents, and be able to quickly get back to the main language setting that should be the default for the system?

    And how to quickly change between languages related to documents
    If you are talking about input keyboards, this is controlled by shortcuts that are explained at the top right of system prefs/language & text/input sources.

  • ProC semantic checking without db connection, how to handle views.....

    Hello!
    We would like to run ProC with sqlcheck=semantics without connecting to a database..
    To do this we insert an
    EXEC SQL INCLUDE definitions.pc;
    in each of our source files containing embedded sql. The file definitions.pc contains
    a set of statements of the form "EXEC SQL DECLARE xxx TABLE ( .... );". This file
    is generated from another file containing "CREATE TABLE" statements.
    This seems to work, if our embedded SQL does not agree with the table definitions in definitions.pc then ProC complains.
    We would now like to get semantic checking for embedded SQL that refers to views
    but are unsure how to achieve this. There does not seem to be a statement "EXEC SQL DECLARE xxxx VIEW".
    One way to "cheat" would be to add "EXEC SQL DECLARE xxx TABLE" statements to definitions.pc for each view in the database. Writing a tool that translate a set of
    "CREATE TABLE" into a set of "EXEC SQL DECLARE TABLE" is easy, but translating
    "CREATE VIEW" into a corresponding faked "EXEX SQL DECLARE xxx TABLE" seems much harder.
    Is there a way to achieve semantic checking without connecting to a database or
    without writing a tool that parses full "create view" statements?
    Thanks,
    Lars

    There is a forum for OCI and OCCI. Please post your questions where they are on-topic.

  • How to run Pre-Upgrade Check without upgrading License Server

    Hi
    How can I run the 8.8 Pre-Upgrade Check without upgrading to the 8.8 license server?
    The Wizard forces me to upgrade it and if I upgrade it, the current 2007 does not run anymore. I want to check my DB's with the Check before upgrading any components and 2007 needs to stay alive.
    Thanks
    Franz

    Hi Franz,
    I would suggest you to check your DBu2019s in your test environment. Please take a backup of all DBu2019s from your live environment and restore them in your test environment once you will have enough free space.
    Please always test the database upgrade in the test environment before doing it in the production environment.
    For more information regarding Business One installation and upgrades on 8.8 version please refer to the Administrator's Guide 8.8, which can be found on the Documentation Resource Centre on the Portal. http://service.sap.com/smb/sbo/documentation  ->  Documentation Resource Center for Release 8.8 
    See chapters: 3.Installing SAP Business One and 5.Upgrading SAP Business One
    Regards,
    Ladislav Meszaros
    SAP Business One Forum Team

  • Availability check, ATP, RLT, Back Order Processing

    Gurus,
                Can you pls do explain me about the Availability check, ATP, RLT, Back Order Processing,   with real time senarios
    Thanks & Regards
    Allen

    Gurus,
                Can you pls do explain me about the Availability check, ATP, RLT, Back Order Processing,   with real time senarios
    Thanks & Regards
    Allen

  • Spell-check without auto-correction? Why not?

    Why can't we choose spell-check without auto-correction?

    Steven,
    As I typed that Reply, your Spellcheck thread (for the forums), came immediately to mind.
    That was one of the prime motivators in wanting a dictionary, that could be customized.
    Over the years, I have migrated my WordPerfection dictionary through several versions, 'cause I have added a ton of wine, food, video and photo terms, and would hate to have to redo all of those, especially the ones using multi-national characters.
    Yeah, maybe inclusion of "Photoshop," "Premiere," "InDesign," etc., etc., would be expected, or at least hoped for.
    Hunt

  • Credit sales order with credit check without top up limit

    Hi Experts,
    I have a silly question, just wanted to confirm is this possible in SAP system?
    I have check thru seem no such function.
    My user requested a requirement is credit sales order with credit limit check however without top up credit limit to specific customer. eventually allow this specific customer sales order, delivery order without blocking and created succesfully?
    Thanks & Regards,
    Yong Kok Wah

    Hi,
    Use a seprate risk category for such customer. In OVA8 Setting for the given risk category set the Credit Limit Seasonal factor.
    By means of above setting system will support the concept of TOP Up credit limit (for a given time period) for given customer against said credit limit.
    Regards
    Digambar Pandey

  • F-58 Print check without check lot number

    Hi experts,
    I am testing the check printing function via F-58. The scenario would be without the check lot number because user will manually feed the check into the printer while printing.
    But as i test in F-58, system keep forcing me to enter the check lot. Does anyone know how to print via F-58 without the check lot?
    Thanks in advance.
    Best regards,
    TCS

    Mate,
    Answer to your query is
    Post the payment through F-53 manually
    Go to FCH5   -  Give the Payment document and input the Check Number here.
    Note: What ever is the next Check number from the Check lot deifned in FCHI, User has to give that only.
    F-53
    FCH5
    Hope it clarifies
    Thanks
    Edited by: nkonnipati on Feb 13, 2012 8:20 AM
    Edited by: nkonnipati on Feb 13, 2012 8:20 AM

  • Authorization check without using variable of type u0093Authorizationu0094

    In WEB-reporting we want to authorize on a navigational attribute without using the variable of type
    “ Authorization”. Why would we do this?
    1. In a lot of queries we have to replace the existing variable of type “User entry” to a variable of type “Authorization”. We would like to avoid this work.
    2. When the variable is not ready for input the Report will always include all the characteristic values for which the user is authorized. We don’s want this.
    3. When the variable is ready for input on the selection screen all the authorized values are displayed and the user is able to select / deselect the values he/she wants to report. In case of a lot of authorized characteristic values the screen does not appear user-friendly.
    What we want is a behavior like some parts of R/3. For example: Controlling Area X consists of the Costcenters C1000, C2000, C3000, C4000, C5000 and C6000. A particular user has authorization for Cost centers C1000, C3000 and C5000. When running a ABAP-report with Cosctcenters the user is able to select certain Costcenters. Three possibilities:
    1. The user selects Costcenter C1000, C3000 and / or C5000: the ABAP reports the selected Costcenters.
    2. The user selects Costcenter C2000, C4000 and / or C6000: the ABAP gives an error-message: “no authorization”.
    3. The user does not select any Costcenters: the ABAP reads all the Costcenters and reports – on the basis of the users authorization – only Costcenters C1000, C3000 and C5000.
    In term of BW: we would like to introduce authorizations for a specific InfoObject which is used as an navigational of an other InfoObject. In the queries a variable is used of the type “User entry”. The user can select one or more values on the selection screen; an authorization check is fulfilled. He may – however – choose to leave the selection field empty; in this case the OLAP processor should report only the authorized values (in our case the last situation results directly in an error-message “no authorization”).
    Anyone has a suggestion?
    Thx in advance,
    Henk

    If you change the variable to type exit, and user input enabled, you can then build your logic in the user exit.
    If users have entered unauthorised values, it will be checked (by the system??). If this assumption is correct then all you need to do in your exit is to continue with the values entered by the user; and in case user has entered no values, populate the variable with values valid for the user (by reading the user authorization and corresponding charactertistics values and moving these to the variable).
    --> Adding further
    Since the authorization will not be checked by the system (I missed that these are not of authorization type variables), user exit will need to do this check. The logic for doing authorization checks / error messages / restricting based on authorizations - will have to be done in the user-exit.
    cheers,
    Message was edited by: Ajay Das

  • Is there a simple way to do a software update check without disturbing the user?

    Simple thing...  You log in to a machine remotely, or you use the session already logged in by the user, and run Software Update.  It goes to Apple's servers, compares software versions, and then you can see a list of which updates need to be pushed out to the machine, and so you cancel out of Software Update and use the ARD install function to push them out.
    So is there another way to find out which updates are available and needed for some particular machine, which does not involve hijacking the user's screen in order to run an application?

    The updates Cathy was asking about are the standard Mac OS X updates from Apple. You can download most of them from Apple and push them out via ARD, or just have each system check for and install separately via the UNIX command.
    Flash Player already comes in a package. You just have to "show package contents" on the Adobe installer and look in the Resources folder for the Adobe Flash Player.pkg file. That can be pushed out by ARD without problems. Many other applications similarly have a hidden .pkg file. Firefox is a single file and can be pushed out via normal file copy.
    For making your own packages for applications that don't use Apple's installer, here are some resources for starters:
    http://developer.apple.com/library/mac/#documentation/DeveloperTools/Conceptual/ PackageMakerUserGuide/Introduction/Introduction.html
    http://macdevcenter.com/pub/a/mac/2003/09/16/packagemaker.html
    http://s.sudre.free.fr/Software/Iceberg.html
    http://www.jamfsoftware.com/products/composer
    Regards.

  • Authorisation check without variable.

    Hi,
    Is it possible to check authorization in the query designer without variable I have got an authorization object on 0Comp_code = TD
    If a user create a new query without variable on comp_code is it possible to give him access to the value 0Comp_code = TD.(to filter the data on the authorization value wihout using variable)?
    Thanks for your help.

    Hi,
    I dont think giving an authorization without a variable is possible, since you already have an authorization object for 0COMP_CODE.
    If a user creates a query using 0COMP_CODE object without the appropriate variable to filter on, the query would essentially ask the infoprovider for all the data and the infoprovider would refer to the authorisation object associated with it which would return a code "No Authorization" for the user (unless the user in question has an authorization to all values of 0COMP_CODE).
    Hope it helps,
    Regards,
    Nikhil

Maybe you are looking for