Avaya IP phone has an issue then downloading calendar from Exchange 2010

Hi all,
I'm having an issue, please give me an advice! When my IP phone (IP) works with Exchange 2010, it can not download calendar. I captured and saw that after client sends hello, server sends hello, server sends certificate, then client sends back bad
certificate and TCP Reset messages. I installed Exchange and AD on the same server. I also installed CA on this server to issue certificate to Exchange. I configured phone download root cert of CA and certificate of Exchange. If you require any information,
please let me know.
I don't know what mechanism that phone used to connect to Exchange to download calendar. And don't have any document configuration. If you have any experience, please share with me.
Hoang Vu,
Thanks

Hi,
You mentioned the client sent back bad certificate, please check if the certificate was configured correctly.
For this issue, I recommend you contact the Avaya IP Phone support to get better help. Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Czn't download Calendar from cableone?? The page isn't redirecting properly Firefox has detected that the server is redirecting the request

Cannot download Calendar from cableone.net???
The page isn't redirecting properly
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.

Does this happen on just one site or does it happen more often?<br>
First I would delete the contents of the cache and delete all current cookies and try again. If clearing does not help, I would try safe mode.<br>
Did you try to start Firefox in the Firefox Safe Mode? If it works when in safe mode, then this problem is probably caused by a broken add-on. If the safe mode does not help, that may be an indication that the server is sending some broken headers.

Is it true that Lightroom 4,4 has an issue importing RAW files from Nikon D610 ?

Is it true that Lightroom 4,4 has an issue importing RAW files from Nikon D610 ?

Hi Kenneth L,
Please use the below link to convert your raw files to DNG files then you would be able to import the files in Lightroom 4.4
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6 For Mac
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6 For Windows
Thanks

I used my new phone to take pictures, then restored it from a previous phone's backup. Is there any way I can restore the new pictures?

I used my new phone to take pictures, then restored it from a previous phone's backup in itunes. Is there any way I can restore my new pictures?

No.
Sorry.
You should be importing photos to your computer regularly as you would with any digital camera.

Has anyone had trouble downloading movies from iTunes on iPad 2? When I download they disappear.

Has anyone had trouble downloading movies from iTunes on iPad 2? When I download, they disappear.

ITunes on the ios device is a link to the store only.
Audio stuff is placed in the music app, video is in the videos app.

Since updating to iOS 6 my phone has not been receiving text messages from some people. Already contacted my service provider and apparently nothing's wrong on their end. Any suggestions?

Since updating to iOS 6 my phone has not been receiving text messages from some people. Already contacted my service provider and apparently nothing's wrong on their end. Any suggestions?

Who's your service provider?

Move mailbox from exchange 2010 2003 , Transient error MapiExceptionLogonFailed has occurred.

We are currently migrating from Exchange 2003 to Exchange 2010, same domain.
We have successfully moved some mailboxes from exchange 2003 to exchange 2010 without any problems.
Now we need to move 1 mailbox back from exchange 2010 to exchange 2003.
After creating the moverequest it stucks on 0% and the log shows the error below.
After using Bing I found this post -> http://social.technet.microsoft.com/Forums/exchange/en-US/ef41ae05-8816-4c0c-968a-c48f0e3d50b5/move-mailbox-back-from-exchange-2010-to-exchange-2003-failure?forum=exchangesvrdeploylegacy
This suggest ->
After I give FULL permissions to each Mailbox Stores on Exchange 2003 server, I was able to move my mailbox back onto the Exchange 2003 server. In details:
Simply right click Storage Group\Mailbox Store and go to Security, in there you may see Exchange Servers group already there, if no add it in, then give it FULL permissions! and thats it!
Create a new move request but still stuck on 0% and error as below
20-3-2014 16:32:10 [ex2010p11] 'contoso.com/Users/exadmin' created move request.
20-3-2014 16:32:11 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'exchangep21.contoso.com' (14.3.151.0 caps:07) is examining the request.
20-3-2014 16:32:11 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
20-3-2014 16:32:11 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
20-3-2014 16:32:11 [ex2010p21] Request processing started.
20-3-2014 16:32:11 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (1/60).
Error details: MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: ex2003
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=163]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=163]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 56583
Lid: 52487 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, String mailboxDn, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo,
WindowsIdentity windowsIdentity, String applicationId)
at Microsoft.Exchange.MailboxReplicationService.MapiUtils.OpenSystemMailbox(Guid mdbGuid, String serverDN, String dcName, NetworkCredential cred, String& systemMailboxDn)
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.OpenSystemMailbox()
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.ClearSyncState()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<>c__DisplayClass23.<CleanupOrphanedDestinationMailbox>b__22(MailboxMover mbxCtx)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.CleanupOrphanedDestinationMailbox(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)
Key: F2FA63B0116C564EA4C598D69786443D9E4FB582FF27D2449142F949D567E1E7E0CA914F6695624C98892FA527AAA91E
SyncStateLength: 0
20-3-2014 16:32:41 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'ex2010p21.contoso.com' (14.3.151.0 caps:07) is examining the request.
20-3-2014 16:32:41 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
20-3-2014 16:32:41 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
20-3-2014 16:32:41 [ex2010p21] Request processing started.
20-3-2014 16:32:41 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (2/60).

Hello，
When you move mailbox from exchange 2010 to exchange 2003, please check if the following situations exist:
http://technet.microsoft.com/en-us/library/dd638157(v=exchg.141).aspx
Before you move mailbox again, please clear the previous move request.
I recommend you use EXBPA to check your exchange server 2003 and exchange 2010.
Please check if inheritable permission is missing on the mailbox store on Exchange Server 2003.
Cara Chen
TechNet Community Support

Who has full access on all mailboxes in Exchange 2010 using Powershell ?

Greetings,
Could you please tell me how can i know Who has full access on all mailboxes in Exchange 2010 using Powershell ?
Thanks.
Redouane SARRA

This is going to depend greatly on WHICH inherited permissions you plan to delete - there are some that you can never delete if you want the system to function properly. Now, that being said, let's look at some example permissions. First, here
are some permissions on a standard mailbox:
Identity             User                 AccessRights
IsInherited Deny
users.corp.... USERS\btwatcher    {FullAccess}
False       False
users.corp.... USERS\svcactAdmin {FullAccess}
True        False
users.corp.... CORP\Domain Ad... {FullAccess}
True        True
users.corp.... CORP\Enterpris... {FullAccess}
True        True
users.corp.... CORP\Organizat... {FullAccess}
True        True
users.corp.... CORP\adminact    {FullAccess}
True        True
users.corp.... CORP\esswin       {FullAccess}
True        True
users.corp.... USERS\svcactEncase {FullAccess}
True        False
users.corp.... CORP\Exchange ... {FullAccess}
True        False
users.corp.... NT AUTHORITY\SYSTEM {FullAccess}
True        False
As you can see, the first is not inherited. All others are, and two are from service accounts (svcact...). Also, some are Exchange system permissions, some are denies, and some are just administrative accounts. Once you determine which
you wish to remove, the SIMPLEST way to set the permissions you want is to open the account properties in ADSIEdit, and go to the Security tab. Here, click the Advanced button and find the inherited permission you wish to remove. ADSIEdit will
show where the permission is inherited from - you will need to go to that container to remove the inherited permission. You can also grant inherited denies at the same level(s).
Now, something you will need to understand is that if you hope to remove permissions granted to domain administrators, the system will replace them - these permissions are required by the system and can't be modified permanently.

Moving from Exchange 2010 to Exchange Online: AD issue

Dear All,
Our company will moving from Exchange 2010 to Exchange Online and we have a on-premise WinSer 2008R2 for AD.
Currently, user have to login to our domain and use the same ID and PW to access their outlook.
1.If we move to Exchange online, do we have to do anything with our on-premise AD server?
2.If user prefer using only one ID and PW for PC to access domain and Exchange online, what should we do?
3.Is there any point or do we still need current on-premise AD server after we moved to Exchange Online?
Thank you so much for your attention and help!
Best regards,
Shiloh

Hi,
There are a lot of corrupted items. You can try raising the baditemlimit to 999 to workaround this issue
Get-PublicFolderMigrationRequest | Set-PublicFolderMigrationRequest -baditemlimit 100
To resumed the PublicFolderMigrationRequest
Get-PublicFolderMigrationRequest | Resume-PublicFolderMigrationRequest
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Simon Wu
TechNet Community Support

HT5455 Is It normal that my premium category 15" retina MBPs screen has ghosting issues, then I get declined from screen replacement?

Is It normal that my premium category 15" retina MBPs screen has ghosting issues, and I get declined from screen replacement?
I have purchased this hardware in Budapest for approximately 3000 usd. I was a bit shocked to see screen ghosting after a few days of use. The problem was getting worse but because I am a design consultant working mainly on my Mac I couldnt take a week off to leave It at an Apple service station.
Last week I was surprised to receive the information from the local Apple repair shop in Germany that my retina MBP that I bought 13 months ago was declined from screen replacement by Apple.
Considering the price of the product I find It unacceptable that I need to work on a defective product and see shadows every time I leave an Illustrator or InDesign window open for a short period of time.
Is there any way to resolve this issue? I wouldnt like to pay another 800 dollars just to replace a component on my defective Apple product.

Contact Apple Support directly. In Germany the Expresslane or this number
0800 6645 451 will allow you to speak directly to someone from Apple. Explain your situation. Mind you, AppleCare and issues with Apple products like this have to occur without any user accidents or user installed parts to ensure that Apple will cover you. If there was a user accident or installed part, you may be turned down. If you have the original Apple parts, and did the installation yourself, replace it with the original parts very carefully following the directions on http://www.ifixit.com/ unless you can afford an authorized service provider to do it for you. Since we don't speak for Apple here, being end users like yourself, that's why I say "may", as I've seen Apple handle these things on a case by case basis. So hopefully you don't have any obvious damage that looks like it is user caused. Good luck!

AVAYA IP Phones unable to get an IP address from DHCP server.

I installed new SRW208P switch and I mada an uplink connection with SRW 2024 switch (using GE port).
when I am trying to connect AVAYA IP Phone to the SRW208P port, the set trying to get an IP address from the DHCP server and failed to get it.
some times after 10 minutes, it get the IP address, but all the machines (PCs) connected to the same switch (SRW208P) hange.
Note: the PCs an IP Phones are connected with separate UTP cables to the access switch.
Is there any suggestions to solve this issue, please.
Regards,

The issue is that your machine is not being assigned an IP address / was unable to reach the DHCP server to receive one. The 169.254.x.x IP your machine is showing isn't assigned from DHCP, it's assigned by the local machine and is referred to as an APIPA
address.
So something is preventing your machine from reaching your DHCP server, which could one of a number of things. In the first instance I'd suggest having a look at
http://epan36.blogspot.co.uk/2012/09/eventid-1001-dhcp-your-computer-was-not.html which lists several of things that could cause this error and things you can try in order to resolve it.
If none of those work, can you confirm whether you have any other machines connecting via the same method on the network, which might indicate whether this is an issue at the machine end or somewhere between the machine and DHCP server?

Issue moving remote user from exchange 2007 to 2013

have moved over 60 people so far from exchange 2007 to 2013, it was going well with no major problems.
during migration I have created a DNS setting called legacy.mydomain.com, and it points to the old exchange server, while mail.mydomain.com points to the new exchange server.
outlook was working connecting to both servers, and OWA was working on both servers.
couple of remote users who connect via SSL-VPN and outlook 2010 had issues connecting, but as soon as I moved them to 2013 exchange they connected without vpn using outlook anywhere.
but - I have one remote user who even though the mailbox move to the new 2013 server was successful, their outlook still points to the 2007 exchange server.
if I try creating a new profile in outlook 2013, it fails because it cannot contact exchange server, even when ssl-vpn is running.
when I started troubleshooting I found lots of spyware on his laptop, symantec had been blocking some trojans, obviously he had downloaded something he shouldnt have.
could this have caused my outlook connectivity issue?
I ran malawarebytes, and it shows clean now, but still unable to get his outlook to connect.
I had thought about moving his mailbox back to the old server, seeing if it works on outlook, then moving it to the new one again.
any suggestions?

I had thought about moving his mailbox back to the old server, seeing if it works on outlook, then moving it to the new one again.
Hi,
Have you done this step? Sometimes moving mailbox to another database can auto-fix problems.
According to your description, I know that all migrated mailboxes work well except a specific user. I notice that the user's laptop has a lots of spyware, and symantec has been clocking some trojans.
Please try to logon OWA to check whether this user works.
If works in OWA, it seems that the mailbox has been migrated to 2013 successfully.
Generally, re-creating profile can fix this issue. Unfortunately, you have tried it and failed.
Please try to run Outlook under safe mode to avoid AVs and add-ins.
Thanks
Mavis Huang
TechNet Community Support

Issues syncing mobile devices with Exchange 2010

Hi,
We are having issues with with Activesync, every so often the w3wp.exe process takes up most of the cpu and mobile devices either stop syncing all together or become very slow to collect email. I have gone through everything that I can find and have
hit a dead end in my quest for answers. When it happens I can fix it easily by either performing an IIS reset or killing the process.
Most of what I have read points towards one of the mobile devices hitting the server to often pointing to an issue with that device. I have gone through all of the logs as suggested but I need to know how often is to often. I know which devices
are hitting the server most often so do I just assume that these are the problem.
Even if I know which devices are the problem how do I go about fixing them so that they no longer cause issues. Simply blocking them from the server is not an option as they need to collect their email on their mobile devices. Also If a user
has more than one device do I combine their hits on the server or is the amount of hits on a per device basis.
Do the size of users mailboxes or number of object effect this.
In the organisation we have iPhones, iPads and Windows phones.
Thanks for any help in advance, let me know if I need to collect any more info.
Cheers.

I still have not gotten to the bottom of this but here is some more information.
We are running Exchange 2010 and the Apple devices all have either iOS6 or iOS7 installed. I believe the issue is with an iPhone 5s with iOS7 installed as when I go into the worker processes in IIS on the Exchange server the MSExchangeSyncAppPool shows
that it is using the CPU. If I then double click on it I can see that every time there is a problem the same iPhone
is connected to Activesync and has Type=iPhone&Cmd=MeetingResponse. I know who's device it is and as per usual with these things it is the CEO's iPhone so I need to wait until he is back
in the office to have a look at it.
I will update my this thread once I have more information.

ICloud storage issue; Restoring iPhone calendar from iMac after accidental iCloud deletion

I set up iCloud to back up calendars and contacts and for find my phone. Initially, it seemed to work alright. Then I got messages on iPhone that there wasn't enough iCloud storage, even though the storage tab showed that I had used none of my iCloud storage at all. So I turned off iCloud/contacts. In iTunes I switched back from iCloud backup to backup from my iMac.
Later I got the same message about not enough room in iCloud even though only calendars involved. So I truned off iCloud/calendar on my iPhone and was given the choice of keeping the calendars from the iCloud or deleting them (a foolish choice without a failsafe!!!). I clumsily and mistakenly hit delete. My calendars have most recently been synced with my new iMac and appear on the iMac and should also be in TM. But right now there is no data in my iPhone calendar.
When i go to calendars within the iiphone calendar there is a check next to Calender under "from MY Mac" and no reference to iCloud. (There are no separate calendars for me, my wife, and joint. Does this mean somehow these calendars have been merged because of iCloud?)
I don't want to do another sync until I can make sure that the sync with the iMac will resotre the calendar(s) to the iPnone. How do I do this?
Do I have to do anything on the iMac before I try a sync?
How do I avoid these problems in the future? The only thing I really would like from iCloud is "find my phone". How do I keep that capability without backing up or su=yncing otherwise anything through iCloud?
Is iCloud still Beta?

Apple walked me through this and helped me revert to backing up on my iMac, using iCloud only for find my iPhone and iMac. The process, however, is not straightforward and what the respective mac and iPhone support people (yes, they have that kind of specialization) led me through was clearer, if somewhat convoluted, than any instructions on Apple's support or community pages.
Since my main concern was not losing my calendar and contacts information, the key was saving that, via export, to my desktop. Sorry I didn't write down all the other steps - but I see that as Apple's job. Back in the days of the IIC, Apple's manual was a model of clarity and completeness at the same time.
Bottom line is while my immediate concerns were resolved, the underlying iCloud storage issue was not. On my iPhone, I was being told that my attempts to backup to the iCloud failed because I didn't have enough storage, even though I determined almost none of my alloted space was used. This issue is not helped by the multiplicity of settings relating to iCloud, or the interfaces (such as the iCloud on the iMac through Mavericks) which present a screen of icons without additional information.
For my purposes, iCloud remains Beta.

Issue with SLA reports of Exchange 2010 MP in SCOM 2007 R2 !!

Hi,
I have issues with Exchange 2010 MP SLA reporting. Whenever report is run it fails on some or the other dataset(Outage**,SLAbyDAte etc.) When I digged in, I found that it is connecting to DW Exchange 2010 Availability tables + Planned maintainance +
outage table. The tables were not available in the DW, not sure how it got removed. Initially I tried by uninstalling and installing MP(Exchange 2010 & Exchange 2010 reports both) if relevant tables get created automatically but it did
not help and I was still facing the same issue. Then I tried to create the tables manually and check if it could resolve the issue. There was unique ID associated(different in different computer) with the name of most of the tables. I tool it from Exchange
report data source which exists in reporting server. But I could see that table remain empty with no records there and SLA report start giving different issues stating table instances do not exist.
Could anyone help me to restore the SLA report of Exchange 2010 MP ? How should I ensure that data start populating the tables ? I am also helpless here because we do not have correct DW dump to restore back to earlier when it was working fine.
//BR

Hi,
Based on my research, to correctly install the Correlation Engine, consider the following when you install the Exchange 2010 Monitoring Management Pack:
Determine which server will host the Correlation Engine. While not strictly required, it's strongly recommended that the Correlation Engine be installed on the Root Management Server computer.
Make sure that you download and install the Exchange 2010 Management Pack that matches the operating system for the selected server. You can install the 32-bit or 64-bit version.
Make sure that you run the Microsoft Installer (.msi) package on the server where you want the Exchange 2010 Management Pack and the Correlation Engine to be installed.
After the installation is complete, the Correlation Engine service will have been installed on the server, and the Management Pack files will have been copied to the
System Center Management Packs folder. By default, the installation directory is C:\Program Files\System Center Management Pack.
Quote from:
http://technet.microsoft.com/en-us/library/ee758051(v=exchg.140).aspx
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
Regads,
Yan Li
Regards, Yan Li

Avaya IP phone has an issue then downloading calendar from Exchange 2010

Similar Messages

Maybe you are looking for