AVAYA IP Phones unable to get an IP address from DHCP server.

I installed new SRW208P switch and I mada an uplink connection with SRW 2024 switch (using GE port).
when I am trying to connect AVAYA IP Phone to the SRW208P port, the set trying to get an IP address from the DHCP server and failed to get it.
some times after 10 minutes, it get the IP address, but all the machines (PCs) connected to the same switch (SRW208P) hange.
Note: the PCs an IP Phones are connected with separate UTP cables to the access switch.
Is there any suggestions to solve this issue, please.
Regards,

The issue is that your machine is not being assigned an IP address / was unable to reach the DHCP server to receive one. The 169.254.x.x IP your machine is showing isn't assigned from DHCP, it's assigned by the local machine and is referred to as an APIPA
address.
So something is preventing your machine from reaching your DHCP server, which could one of a number of things. In the first instance I'd suggest having a look at
http://epan36.blogspot.co.uk/2012/09/eventid-1001-dhcp-your-computer-was-not.html which lists several of things that could cause this error and things you can try in order to resolve it.
If none of those work, can you confirm whether you have any other machines connecting via the same method on the network, which might indicate whether this is an issue at the machine end or somewhere between the machine and DHCP server?

Similar Messages

Unable to get ip address from DHCP server for Aironet 1130AG Access Point

I have a network in which DHCP server is enabled. I have read the installation guide also there it is mentioned that 1130G Access point will not have any staic ip assigned to it.So it will automatically get the ip from the DHCP server from the network. I have connected that from the network but it is unable to get the ip address from the same. The same thing i have configured in the netgear it is coming fine. I have seen the sonic wall and used the IPSU tool also from checking the ip address from Mac Address but i am not able to get the same. Please provide me some tips to check where i am wrong in configuration because the first web page also not coming because of the ip address.

narendra,
I would suggest that the AP be connected to a laptop or desktop pc that would run a local dhcp server with a small scope setup...plenty of free ones on the web(this pc would obviously not be connected to your currnet network). This way you can watch the dhcp server hand the AP it's address (this can take a few minutes). Once you have the address use it to access the GUI and give the AP a static address (I find it good pratice to give all my autonomous AP's static addresses for ease of troubleshooting)...Hope that helps.

AP gets always a new IP address from DHCP server

Hello,
When an access points doesn't find a controller it gets always a new IP address from DHCP server.
Does anyone know, why?
thanks

Hi,
From what I know this is to do with DHCP option 60 and 43.Normally when APs request for IP address, DHCP Server also returns the management IP Address of WLC if the VCI matches.
If the VCI sent by the AP does not match with the one configured under DHCP for that particulart AP type, the DHCP will never return the WLC IP and hence AP can not find the controller.And the AP keeps sending DHCP Req and sometimes end up getting two IP addresses!
So may be you can check VCI on DHCP server for that AP model.
Let me know.
Cheers

SPROXY unable to get Interface meta-data from XI Server

Hi,
In our SAP R/3 Enterprise system, the transaction SPROXY complains that "No connection to Integration Builder (only local data visible)". It is unable to get the message interfaces defined in the SAP XI Server.
Connection to SLD is configured correctly, and transaction SLDCHECK works correctly.
Where can I configure the SAP R/3 system so that it can retrieve the message interfaces from SAP XI system ?
thanks,
Manish

Hi Manish -
Did you maintain the RFC destinations LCRSAPRFC and SAPSLDAPI? And the corresponding J2EE connections? These must be completed in addition to other possible configurations.
Please check XI 3.0 Configuration Guide, section 8 (Connecting Business Systems with an Integration Engine to the Central Integration Server). These have all the necessary steps.
Regards,
Jin

DHCP client fails to get an valid IP address from DHCP server. windows 8.1

I have a win 8.1 Pro 64 bit pc in my office .I'm trying to connect it to my wireless cisco router with either wireless or hardwired connection but I get an error in the event viewer with discription DHCP error 1007. and Ip address showing
169.254.93.17 but our dhcp range is 192.168.1.x
Log Name: Microsoft-Windows-Dhcp-
Source: Microsoft-Windows-Dhcp-Client
Date: 23/Jun/2014 12:03:21 PM
Event ID: 1001
Task Category: Address Configuration State Event
Level: Error
Keywords: (1)
User: LOCAL SERVICE
Computer: sanddeplap.vts.com
Description:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xF4B7E22D8721. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its
own from the network address (DHCP) server.
Event Xml:
<Event xmlns="http://schemas.">
<System>
<Provider Name="Microsoft-Windows-Dhcp-
<EventID>1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>75</Opcode>
<Keywords>0x4000000000000001</
<TimeCreated SystemTime="2014-06-23T08:03:
<EventRecordID>363</
<Correlation />
<Execution ProcessID="988" ThreadID="7932" />
<Channel>Microsoft-Windows-
<Computer>sanddeplap.vts.com</
<Security UserID="S-1-5-19" />
</System>
<EventData>
<Data Name="HWLength">6</Data>
<Data Name="HWAddress">F4B7E22D8721<
<Data Name="StatusCode">121</Data>
</EventData>
</Event>
I tried to track issue with microsoft network monitor I'm attaching the capture file also please help me to sort out this issue
capture report https://onedrive.live.com/redir?resid=AFE3D0245A92F6F8%21183

The issue is that your machine is not being assigned an IP address / was unable to reach the DHCP server to receive one. The 169.254.x.x IP your machine is showing isn't assigned from DHCP, it's assigned by the local machine and is referred to as an APIPA
address.
So something is preventing your machine from reaching your DHCP server, which could one of a number of things. In the first instance I'd suggest having a look at
http://epan36.blogspot.co.uk/2012/09/eventid-1001-dhcp-your-computer-was-not.html which lists several of things that could cause this error and things you can try in order to resolve it.
If none of those work, can you confirm whether you have any other machines connecting via the same method on the network, which might indicate whether this is an issue at the machine end or somewhere between the machine and DHCP server?

IPad wont get IP address from DHCP Server

I have an enterprise WPA2 PEAP MSCHAPv2 wireless network. It allows access via 802.1x authentication using Radius (MS IAS Server) with certificates. I can join the network, enter credentials (that I can see work) and get the certificate. The problem is that I don't get an IP address. I get a 169. APIPA address. I tried to use a static IP address and that doesn't work either. I have connected various laptops, iPhones even a Dell Streak to this wireless network without issue. My iPad won't get an IP at all. There are plenty of addresses in the pool.
The setup is a 3COM WX3008 wireless LAN controller and 9552 access points.
Any ideas? I went through the articles on wireless settings and none of them help at all. I guess my next step is to wipe the iPad.
Like I said... EVERYTHING else works, every other device we try is surfing just not the iPad.

I see what you are trying to say but in this case its just not true. There is a problem with the iPad. Moving away from the most secure wireless technology or changing my "router" isn't a reasonable solution. We are using a current production model enterprise wireless LAN controller with lightweight access points. Its running its latest code. Its not the Free After Rebate model from the local B&M.
Again, when everything BUT the iPad works (iPod/iPhone/laptops of varying OS & vendor are all good) its not the routers fault. While downgrading my network may work it is not a reasonable solution to a problem with only the iPad.
Of course I don't like hearing it. I am here to hopefully find someone else with the same issue or get some tips that lead to a solution so the next google searcher will land on a solution.

Can't get any IP address from DHCP, but unattributed IP adress "already in use"

Hello,
I have a mac mini with a manual IP address (192.168.1.121) which connects fine to the internet through ethernet.
When switching to DHCP instead of manual, no IP address is ever given to me (blank space after IP adress: in the network prefpane)
however, I immediately have an alert popup that says the address 192.168.1.150 is already in use.
I wonder where I could change this 192.168.1.150 address since I do not have this setting at all on this machine on any Network Port, not in Airport and not in ethernet. (I have no other network ports)
How can I change a setting that I didn't make in the first place?
The console reports the problem once every second also, and there is quite a general slowdown and beachball because of this.
I tried to renew DHCP lease but it stays blank too.
I also try to delete ethernet interface, and trash the Network configuration in the general Library, reboot, recreate it but the problem remains.
I also have reinstalled Snow Leopard and applied updates with no better luck.
Thank you very much everyone if you have a clue.

When you changed the setting to DHCP, did you click the Apply button? Also, you need to restart after changing from a manual IP address so the router can assign an unused address to the Mac when it detects it during startup.

LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping

Hi All ,
Enclosed file has network connectivity diagram.
1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2.
2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
3.DHCP is server is located at different location and is reachable over MPLS.
Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2 and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
Note : DHCP snooping is not configured on SW1 and SW2.
Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .

Hi,
as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
Best regards,
Milan

Avaya IP phone has an issue then downloading calendar from Exchange 2010

Hi all,
I'm having an issue, please give me an advice! When my IP phone (IP) works with Exchange 2010, it can not download calendar. I captured and saw that after client sends hello, server sends hello, server sends certificate, then client sends back bad
certificate and TCP Reset messages. I installed Exchange and AD on the same server. I also installed CA on this server to issue certificate to Exchange. I configured phone download root cert of CA and certificate of Exchange. If you require any information,
please let me know.
I don't know what mechanism that phone used to connect to Exchange to download calendar. And don't have any document configuration. If you have any experience, please share with me.
Hoang Vu,
Thanks

Hi,
You mentioned the client sent back bad certificate, please check if the certificate was configured correctly.
For this issue, I recommend you contact the Avaya IP Phone support to get better help. Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Unable to get IP address from DHCP since upgrading

Hi all,
I upgraded my machine to Mountain Lion last night. Ever since then I have been unable to get any IP information using DHCP. Each time I hit Renew Lease within the Network control panel I just get back a self assigned IP address. If I look in the system logs I see the following generated each time my machine tries to look for the DHCP server:
Jul 26 01:32:27 Lightning.local configd[22]: bootp_session: bind port 68 failed, No route to host
Jul 26 01:32:27 Lightning.local configd[22]: bootp_client_open_socket: S_get_bootp_socket() failed, No route to host
Jul 26 01:32:27 Lightning.local configd[22]: bootp_client_bind_socket_to_if(en1, 6): session socket isn't open
Jul 26 01:32:27 Lightning.local configd[22]: bootp_session_transmit: neither bpf nor socket send available
Jul 26 01:32:27 Lightning.local configd[22]: bootp_client_bind_socket_to_if(en1, 0): session socket isn't open
Jul 26 01:32:28 Lightning.local configd[22]: bootp_session_delayed_close(): socket is already closed
I've tried rebooting, clearing the PRAM, deleting Prefs, etc, but nothing seems to have worked.
Anyone any ideas what is going on or what else to try? It used to work perfectly before I upgraded.
Thanks

I am also having this problem since I upgraded to Mountain Lion. I did an upgrade from Lion, not a clean install. I had done a clean install of Lion though. In my case, the network connection is working most of the time, but it is droping one a day. Deactivating the Ethernet and the Wi-Fi adapters and reactivating them does not help.
Here is my what I am getting in the console when I have lost internet connection and I try to renew the DHCP lease:
2012-08-30 6:13:59.158 PM configd[17]: bootp_session: bind port 68 failed, No route to host
2012-08-30 6:13:59.158 PM configd[17]: bootp_client_open_socket: S_get_bootp_socket() failed, No route to host
2012-08-30 6:13:59.158 PM configd[17]: bootp_client_enable_receive(en0): failed
2012-08-30 6:14:00.158 PM configd[17]: bootp_session_delayed_close(): socket is already closed
And I get a self assigned IP.
I hope Apple will have a fix for this soon!
Cheers!
JF

Since I downloaded Firefox 3.6.6 on my Mac, I am now unable to get e-mail address to automatically complete when I enter the first few letters of the address. in English

Since I downloaded Firefox 3.6.6 on my Mac, I am now unable to get e-mail address to automatically complete when I enter the first few letters of the address. in English
== This happened ==
Every time Firefox opened
== I downloaded Firefox 3.6.6

In my case it seems that Firefox just doesn't "see" (or can't find?) the coupon printer application anymore after the FF update. (and yes, my add-ons are enabled - to answer the tech support people's first question).
For me, the coupon printer doesn't even show up in my Firefox "Add-Ons" list anymore. Is that what people typically see when they're saying the coupon printer "doesn't work" with FF? The coupon printer was visible on the add-ons list before my FF update, and now it's totally Gone! It seems that Firefox just doesn't "see" (or can't find?) the coupon printer application anymore since the FF update.
When I'm on the coupons.com site and I click "print coupons", it tells me I haven't installed the application. But it Is installed on my computer, I can see it in my folders, and it works on IE, so it's definitely there.
BTW - I have uninstalled/reinstalled the coupon printer application. I have tried all the suggestions on the Mozilla help/forum sites, as well as the Coupons.com web site. I have closed and re-started Firefox after the installation. I have also shut down and restarted my pc after installation. I tried installing the application with Firefox open, and tried it again with Firefox closed. I've even cleared out all my cookies/history associated with Coupons.com.
... I can't think of anything else to try, except for the "solution" of using IE for coupons.
If it Really is a problem on the Coupon.com end of things, do you think it's worth it if we bombard the coupons.com support team with messages saying they need to fix the problem? (or just a waste of time?) ;(

Unable to get a connection to the WebLogic server

After reinstalling WLS and SP it still didn't work, however, after a 3rd
reinstall in
the DEFAULT directory of c:\weblogic, it finally worked! It would NOT work
from c:\tools\weblogic. Who knows, maybe i didn't update a magic variable
somewhere.
-b
"Bob Banks" <[email protected]> wrote in message
news:397e0db2$[email protected]..
Pablo, how did you fix your problem? Same thing happening here on Win2000,
WLS5.1 SP4.
Thx,
-Bob
"Pablo Corinkha" <[email protected]> wrote in message
news:[email protected]..
Trying to use the statelessSession EJB example. When attempting to run
the client, I get the following message:
Beginning statelessSession.Client...
We were unable to get a connection to the WebLogic server at
t3://localhost:7001
Please make sure that the server is running.
The WebLogic server is definitely running, though. I am able to access
it using port 7001 from a browser. What could be wrong?

StatelessSession Example: We were unable to get a connection to the WebLogic server at t3://localhost:7001

I have seen other related posts on this site but really no answers, the users seem to be left hanging.
Anyway, I am trying to run the statelessSession example, with the WebLogic server running and listening
on port 7001 on the current machine (i.e. localhost).
Here is what I am seeing:
c:\weblogic\myserver\clientclasses>java examples.ejb.basic.statelessSession.Client
Beginning statelessSession.Client...
We were unable to get a connection to the WebLogic server at t3://localhost:7001
Please make sure that the server is running.
System Configuration:
Win2000, WebLogic 5.1, WL Sp2, Java 1.2.2, weblogic home==> c:\weblogic
I have attached the weblogic.log.
Regards,
John

Hello John,
When I first install "weblogic", I am successfully able to run the examples, but after some time which I completely forget how I make them run, I install it again and encounter the same problem as you.
After spending nearly a whole day on restarting computer, viewing ports etc. :) :(, I remember that I make weblogic run from the command line. First, in a console run setenv and startWebLogic tools which are located under weblogic directory and in an another console run setenv again(for possible errors, I want to be sure that it is correct again) and run your client as explained in the tutorials html pages.
As seen, in computer science, simple things, not hard things, always cause you to lose time :)))
Best regards
Banu
"John Pda" <[email protected]> wrote:
>
I have seen other related posts on this site but really no answers, the users seem to be left hanging.
Anyway, I am trying to run the statelessSession example, with the WebLogic server running and listening
on port 7001 on the current machine (i.e. localhost).
Here is what I am seeing:
c:\weblogic\myserver\clientclasses>java examples.ejb.basic.statelessSession.Client
Beginning statelessSession.Client...
We were unable to get a connection to the WebLogic server at t3://localhost:7001
Please make sure that the server is running.
System Configuration:
Win2000, WebLogic 5.1, WL Sp2, Java 1.2.2, weblogic home==> c:\weblogic
I have attached the weblogic.log.
Regards,
John

Unable to get IP address from DHCP

hi all,
I have a AP1131 which cannot get IP from DHCP server. I have tried to configure static IP address and controller IP by lwapp command and the AP can successfully joined the controller. However, after I changed it to DHCP in WLC, it cannot get IP address and all lwapp config is gone. It cannot join the controller anymore only after I reset it and configure a static IP for it. The following error message appears after I changed it to DHCP in the WLC:
*Mar 7 08:44:36.511: RESETTING THE STATIC IP ADDRESS: LWAPP goes back to discovery
%WIDS-6-DISABLED: IDS Signature is removed and disabled.
%LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
%LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
%LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
%LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
%LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
Any expert has some idea on it?
Thanks.

Is that AP on the same subnet as the other AP's? The thing is, when you configure the AP with static information, you say the AP is able to join the WLC. This means that there is no issue with the AP. Now when you set the AP to use DHCP and not static, the AP does not obtain a DHCP address? Is that correct? If you have more than one AP on the same switch and on the same vlan, and only one has an issue, then maybe reset that AP to default and see if that fixes it. I'm also assuming that the vlan is being forwarded and you have enough dhcp address in the scope.

Error: Unable to process the following response from FOI server

Hi
While integrating BI with mapviewer, I am getting the following error:
Unable to process the following response from FOI server
Please let me know how this can be fixed
Thanks & Rgds
Dipesh
Message was edited by:
user542575

One more question about NSDP, Im still wondering how can NSDP work as you only need to declare nsdpInfo.setKeyColumn("xx") --xx
Eg. My result set come from OBIEE, it hase 2 column xx and yy.
Im just copy the sample code to translate the output into xml, the output sample is like:
Column 1 Column 2
440100 0
440200 5
440300 1
So how can MapViewer know that the second column is the value column?
The same question is about when the output is multiple column.

AVAYA IP Phones unable to get an IP address from DHCP server.

Similar Messages

Maybe you are looking for