AVCHD 25p plays to fast after import????

I have just moved from a Panasonic sd5 to the sd9 and I shot a load of film using the 25p cinema mode. I had no problem with the previous cam using the normal HD setting, the sound is correct but the film runs to fast. Any ideas? is there anything i have to do or will I have to take the footage to FCP?
Cheers all

hey there boarddude,
iMovie is made to take DV, HDV & AVCHD @ standard frame rates: DV 30fps(USA), HDV 1280 x 720p 30fps(USA) or 1920 x 1080i @ 30fps(USA), AVCHD 1920 x 1080i @ 30fps(USA). variable film rates such as 25fps/24fps are a no go in iMovie or FCE. 25fps is the rate for film & generally used by pro shooters/cams in order to more easily facilitate an ultimate output to celluloid film like 35mm.
you'll need to got to FCS--might find on eBay or FCS2.
good luck.

Similar Messages

  • Voice too fast after import: iTunes to Garageband

    Hi I searched the forum but could not find a solution.
    I recently recorded my first podcast. Here are the specs:
    RECORDING
    I connected the phone to iPod via a mini jack to the top of a Griffin recorder.
    I recorded the interview.
    Connected the iPod to my MAC.
    Voice recording synced up nicely with iTunes
    It plays perfectly on iTunes.
    GARAGEBAND
    I then open a new podcast project with GarageBand.
    I find my interview via the media browser in my iTunes Library.
    I then played it again to make sure it is OK
    Then I drag it to my Male Voice in Garageband...
    PROBLEM
    The voice plays like if it is mikey mouse speaking on adrenalin
    The recording is 23:20mins long but after import it is condensed to 4:13mins
    What do I do? Your help is really appreciated.
    Cheers,
    Rick

    Hi Rick,
    This happened to me as well. It has to do with the audio sampling rate not matching between the ipod recorder and garageband. The solution I came to, was to use quicktime to convert the audio before importing it into Garageband. I'm not sure whether it takes QT Pro to do this or not, I have QT pro so didn't think about it.
    I use "Sound to .wav" and I had to play around a bit with the settings to get it to work. I think upping the sampling/bit rate to 44,100 is what did the trick, though I am answering this from memory so not completely sure, you may need to fiddle with it a bit.
    Don't know whether the Griffin has software which allows you to vary the sample rate in the original recording. My recorder does not, so I have to convert.
    Good Luck!
    - Erin

  • Music files duplicated in Finder once played on iTunes after imported

    Whenever I now import songs, albums, etc. to my mac locally they don't show up in itunes until I double click on them directly in finder to make them play in iTunes. However, after they start playing in iTunes a duplicate file is created doubling the file size of the original file I had clicked on. Any suggestions on how to delete the duplicates without me having to search and delete them one by one?

    How are you "importing" songs? If simply copying files to somewhere on the Mac they won't be added to iTunes until you do it by dragging them to iTunes or double clicking on them to play them.
    If you have iTunes' preferences set to add a copy of music to your media folder when adding an item it will copy an item from wherever it is located and put a copy in your media folder. Most people want iTunes to organize their music for them, but you can also unset that option in iTunes' preferences.

  • My LT file plays back faster after I render

    When I render it and import it into FCE, the credits scroll faster, a good bit faster I'd say 20% or so. As a result, my credits come up 10-15 seconds too short. Why is it doing this? I've been at this for 3 hours and it does it every time.

    Sounds like the frame rate settings in LT and the frame rate settings in FCE don't match.
    Bony

  • Video on imported AVCHD files is too fast

    I recently got a Panasonic Lumix that shoots AVCHD video. I upgraded to iMovie '09, since it is supposed to be AVCHD-compatible. However, the AVCHD files I imported in iMovie have the video playing super fast, while the audio is normal. I've tried switching between NTSC and PAL formats, with no change.
    Anyone else experience this? Anyone know why this is happening? Help please?

    First, work through all of the steps here http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of that link
    PS you are in the wrong forum http://forums.adobe.com/community/premiere/premierepro_current

  • Elements Organizer (v12) not displaying AVCHD video after import

    I installed Premiere Elements 12 on my Windows 8 (x64) computer.  After I import a MTS (AVCHD) video from either my camera and/or my hard disk,the audio plays but no video is displayed.  The MTS file (video + audio) work fine in every other program on my computer, including the Premiere Elements video editor.  The only place it doesn't work is in Elements Organizer.  I can even preview the video in the "Get Videos and Pictures from Files and Folders" import window from Organizer.
    After importing the MTS file into the video editor, I exported it to AVCHD and tried importing the Premiere created AVCHD file in to Organizer but no luck.
    Seems like there's some kind of plug-in issue, but I can't find any info on that.  The codec must be fine, because the MTS file play everywhere else.
    Appreciate any help/insight.

    Thank you so much! Although it's not exporting quite as clear as before, it's much, MUCH better now that I've corrected the timeline dominance - I'd say 95% better; and it will be re-compressed by my clients for web streaming so it doesn't need to be perfect - but the initial quality was garbage.
    I suspect when I exported my T2i footage as a ProRes file, than imported into After Effects, then back into FCP something happened along the way that messed up the quality slightly. Although the only difference in my method between FCP5 and 7 was converting to ProRes; which I only did for editing purposes as the native T2i footage needs to be rendered... which ended up being redundant as all my After Effects work needed to be rendered anyway. Ho hum.
    Do you think the ProRes conversion could account for the quality loss? It wasn't just the footage that was grainy/fuzzy, it was also the After Effects graphic work, which is why I didn't think the converstion could be the culprit. Hm. I'll have to look into this more!
    Thanks again - and so sorry for my delayed reply, I went on vacation shortly after I posted that message and only just got back to this project now
    Message was edited by: kiwikiwi

  • After Import AVCHD from Sony CX730, IMPOSSIBLE to put the video on the Timeline!!!!!

    I have bought Premiere  three days ago. I am working on a AVCHD project, with clips from a Sony FS700 (1080 50p), and clips from a Sony CX730 (1080 25p). I can import the clips but for the CX730 clips it is impossible to put them on the timeline!!!!!
    I can put the audio (5-1) on audio 4, but impossible to put the video... Everybody told me that Premiere support all the codec on the same project... It is not true!!!
    Why????

    Yes! you are right, every thing work well now!! Thanks a lot!
    With my best regards.
    Eric Dragesco
    Chalet Capercaillie
    Route des Renards 57
    CH - 1882 - Gryon
    Tel : 0041 24 498 33 48
    Tel : 0041  79 244 47 11
    Email : [email protected]
    Web : www.ericdragesco.com
    Le 3 avr. 2015 à 13:48, Ann Bens <[email protected]> a écrit :
    After Import AVCHD from Sony CX730, IMPOSSIBLE to put the video on the Timeline!!!!!
    created by Ann Bens <https://forums.adobe.com/people/Ann+Bens> in Premiere Pro - View the full discussion <https://forums.adobe.com/message/7401902#7401902>
    are you sure the track are source patched?
    v1, etc on the very left of the timine
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7401902#7401902 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7401902#7401902
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Premiere Pro by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 81>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Spoken work files will not play even after importing/converting?

    I have some audio files recorded on my Android phone with the basic recording app and the files play when I press the spacebar to preview them in Mavericks. However, after importing them into iTunes using various import settings, including the podcast spoken word ones, they just will not play. When I double click on the file it looks like it is about to play, the apple icon at the top switches to what looks like a progress bar, though it is different from other tracks that do play, and then it immediately switches back to the apple icon and does not play.
    Any ideas of anything I can do?
    Thanks.

    I've found an issue with movies when the audio is IMA format. Is that the format of your audio?

  • I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

    i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Updated to LR 5.4, images now importing extremely slow. After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast.

    After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.

    Download LR 5.3 and install it
    By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4

  • AVCHD footage "jumping" after import

    Hey there,
    I have FCP 6.0.4 and Sony CX7K AVCHD camcorder.
    Log & Tranfser see my camera just fine and I can preview videos in there with no problems.
    Problems starts when I transfer those videos from my camera to the project in ProRes format. After importing video starts to… ehm jumping! Hard to explain, much easier to show. See it for yourself: http://www.vimeo.com/2097051
    Any suggestions?

    I'm having exactly the same problem. The video that I import from my Sony HDR-SR10, jumps backwards every 15th frame, leaving me with a seizure inducing "Wang-Chung" effect. However, the suggestion that I delete Perian and TubeTV doesn't work for me, becuase, when, I search the computer, no such files exit.
    Any other suggestion?
    Thanks,
    Brad

  • Itunes does not play after importing into timeline

    I have looked at similar topics in this discussion forum but still unable to get the answers.Basically the problem is that after importing (purchased) itunes(6) music(and it imports OK)there is no music when played back in the time line.In the imovie palette (audio view) the itunes music plays normally.CD is also greyed out even if there is a CD in the CD drive,so obviously CD tracks cannot be played.Itunes 'by itself' plays normally and CD is also recognised.Voice overs thru microphone,original audio from footage also plays normally.All boxes ticked on the right/computer volume set to high etc so setting seems allright.I am using formac studio to import analogue footage and can hear the original sound when importing.Using imovie 3.03 on ibook.this may/maynot be relevant-on the G3 imac in imovie(3.03)the itunes/CD tracks imports and plays on the timeline,however the original footage soundtrack sounds like gunfire from a machine gun.It is normal with the imported itunes soundtrack switched off.
    Grateful for any thoughts/adv
    rav
    ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)
    ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)
    ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)
    ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)

    Hi rav - are you sure that if you have a CD installed you cannot see its tracks in the Audio Pane? Even though 'Audio CD' is greyed out, the contents of the CD are still there and accessible.
    Can you convert the track to mp3 format? iMovie does accept mp3s. Doing so might break the deadlock.
    Sorry, I can't help with your other audio issue.
    G5 Dual 2.0 ghz   Mac OS X (10.4.3)   1.5 GB RAM; VidCam: Sony DCR TRV80E

  • Why are my AVCHD clips recorded in 60i being converted to 29.97i after import?

    Hello, after importing footage that was recorded in 60i on an AVCHD still camera, the clips are converted to 29.97i.
    How do I maintain their original format during import?
    Thanks.

    It is a misunderstanding, your video has not been converted.
    https://discussions.apple.com/message/15811006#15811006

  • Cannot play after importing library

    Some time ago I changed my Apple id from X to Y. Then:
    1. Backed up all of iTunes library to an external hard-drive from MacBook Pro using rsync.
    2. Imported all of iTunes library into Windows iTunes from the hard-drive using File->Add Folder to Library.
    3. Double-clicked purchased track and was prompted for my Apple id and password. Put in Y and the password.
    4. Got dialog saying the machine was now authorized to play the track.
    Repeated step 3. Got step 4.
    Steps 3 and 4 repeat infinitely now.
    These tracks will not sync to my iPod.
    Anyone know how make iTunes friggin work properly here?
    Thanks,
    /r:b:

    ChuckieH wrote:
    Music still won't play after importing iTunes Library using external drive.
    "Still"? It wasn't playing before?
    What did you do to make it stop playing?
    Where is the disconnect in these instructions that state your music should be easily transferred when in fact it is not at all?
    Exactly which instruction are you referring to?
    Music still won't play after importing
    The link above does not mention anything about importing. What did you import?

  • Aif,aiff files/ play sequentiallly after imported tracks

    hi. i-m try getting some help.
    1st question>
    Is there a way to play sequentially tracks in Adobe audtion after importing those one?
    or must i play them one by one and not like an automated task?
    2nd question>
    After recording some new tracks i save them as *.aiff extension files, but Windows Media player is not able to play them.
    All tracks have been recorded at cbr 3072 Kbytes/s, stereo, 48khz sample rate.
    i use Xp sp3 fully updated, Vista, Windows 7, Windows 8 consumer preview as Operating Systems.
    Tvm in advanced if i will have an answer.Enrico /Italy

    It is always best, and more universally usable, to save your audio files as .wav. This is Auditions default format.
    If you import them into the Multitrack view then you can place them sequentially and play them one after another automatically.

Maybe you are looking for