AVCHD footage, Timeline is yellow and will not render past a certain point ??

Hello,
I am using Cs5, and footage is from a Sony NXCAM, AVCHD, 1920x1080i.  Anyway, all the footage is the same, about 60 minutes worth.
I have an good video card, the 3800 so I am able tyo use the Mercury engine. And I have started this project twice now from scratch, with the same results each time.
From the onset, the clips I put on the timeline create the 'yellow' bar, even though the settings I use match my footage exactly. (Strange)
Some of the transitions I use turn the yellow area to red, and it doesn't play back well unless I render the entire work area. All is well until about 12-15 minutes in, then when I ask the software to render the entire work area it no longer does.  It just starts playiong the timeline like it already did it.  But the small red and yellow portions are still there.
So why it won't render betond a certain point is very puzzing!
I took about 40 minutes of footage directly to Encore and was able to put the whole timeline, red parts and all on to a Blue Ray disc.
I then exported the mixed colored timeline to media encoder, I wanted to create a smaller SD file for DVD and 'encoder' only encoded the green area of the timeline, about 12 minutes.
Anyway, I cannot get the timeline to render after about 12-15 minutes of footage.  The time was slightly different on both projects.
Any help would be appreciated!

When Timeline will only Render a certain section, it is often that the WAB (Work Area Bar) has become set to less than the full Timeline. If that is the case, click the \ (Backslash key), and then Dbl-click the little block in the middle of the WAB to reset to the full Timeline.
Good luck,
Hunt

Similar Messages

  • HP Color LaserJet Pro MFP M177fw makes horrible noise and will not move past initializi​ng

    Makes horrible noise and will not move past initializing.

    Hi @HealthITLadyRed,
    I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue.
    Check and remove any packaging material inside the printer and toner.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Update the printer's firmware by a USB connection. Software and Drivers.
    Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
    I can send a private message with another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
    Is this a new printer?
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • My sons ipad is older and will not upgrade past ios 5.  can someone help me with this?

    my sons ipad is older and will not upgrade past iOS 5, therefore he is unable to download certian games.  does anyone have any suggestions or help that they can provide to me regarding this software issue?

    The original iPad cannot be upgraded beyond iOS 5.1.1. It simply doesn't have the hardware. There are still lots of apps in the App Store that will run on iOS 5.1.1.
    You can also try downloading the apps he's interested in to iTunes on your computer. Then, go back and try to download them on the iPad. If the developer makes an older version of the software available, you'll be given the option to download that. Note that not all developers continue to offer older versions.
    Best of luck.

  • Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back o

    Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back okay --- except I got error messages that my "registration for Photoshop (I use CS4 Extended) and Photo Mechanic are no longer working".  I worked on Photoshop first, and tried (several times) to fix it with their online help suggestions.  Nothing worked.
    Is there a simpler way to "get my licenses/registrations back"???  I am also going to contact Camera Bits about the Photo Mechanic issues.   Thanks

    Same problem and for months now. I haven't been able to find a solution, but I suspect that's because I don't know exactly what's wrong.

  • Mac will not login and will not get past start up blue screen

    I installed a new security update and then I clicked for the computer to restart after it did it would not login into the computer, it just stays on the blue screen and says starting Mac OS X... Also before I had to login with my username and password and it just automatically skipped that step and tried to login. I have tried using the disk utility in the install disk, I have also tried the fsck and nothing seems to be working. Please help with any ideas or thoughts you might have.
    thanks
    sean

    Hi table,
    I had the bluescreen thing happen to me a while back. I too tried to login as 'safe-mode'. The first time I tried it I must have gotten the timing wrong because the login window did not appear. I did eventually get the timing right and it worked, however prior to that while I was sitting there looking at a blank, blue screen I hit the enter key. The login window just 'popped' in at that point. It may not work for you but it couldn't hurt to try it.
    Jrsy

  • Imac g5 will not boot past apple logo

    Two weeks ago it started up perfect with no problems , last night i turn it on , it's pixelated and will not go past the apple logo , i reset the pram, i made sure it was running on the OS , i tried to boot of of disk warrior ,nothing worked. I started it in verbose mode the pixels went away and it got hung up on airport link down in enl . I have a picture of where it got hung up , i will try and post it...okay guess i can't do that. I bought this from a friend who had pre loaded the programs i wanted so i do not have start up discs i have a copy of osx and a copy of tiger (i believe) (original programs) i am not sure what os is running on here, but if it helps its not a newer version and i run garage band 8 on it.
    iMac

    How to show us a screen image.  Avoid personal identification.
    command + shift + 3   Will take entire screen.  You hear a click.
    command + shift + 4 Lets you decide what to take.  Mouse pointer changes. Move mouse to upper left corner of desire image.  Hold down left mouse key where to start image.  Drag mouse to lower left of where you want to stop image.  Release mouse.
    You will get a picture n.png file on the desktop.
    On the forum input panel you will see the camera icon.
    click on camera icon.
    another window will appear.
    Make sure you have selected the from your computer tab.
    click on Browse button
    An open file panel appears.  Select the file.
    After selection a file, I have this screen showing.
    You will have to click on Insert Image.  You may have to scroll down to see Insert Image button.

  • My imac g5 will not go past apple logo

    Two weeks ago it started up perfect with no problems , last night i turn it on , it's pixelated and will not go past the apple logo , i reset the pram, i made sure it was running on the OS , i tried to boot of of disk warrior ,nothing worked. I started it in verbose mode the pixels went away and it got hung up on airport link down in enl . I have a picture of where it got hung up , i will try and post it...okay guess i can't do that. I bought this from a friend who had pre loaded the programs i wanted so i do not have start up discs i have a copy of osx and a copy of tiger (i believe) (original programs) i am not sure what os is running on here, but if it helps its not a newer version and i run garage band 8 on it.

    It is hard to give accurate help without knowing exactlly which iMac you have or what OS X it is on.
    At this point I can only suggest, starting up from either the OS X or Tiger copies that you have and see if you can Repair your (Macintosh HD) Startup Disk.
    If the copies of OS X or Tiger are good, then you should be able to startup from one of them holding the C or Option key, navigate to Disk Utility and Repair your Startup Disk.
    Start from your Mac OS X Install disc: Insert the installation disc, then restart the computer while holding the C or Option key.
    When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Click the First Aid tab.
    Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    Select your Mac OS X volume.
    Click Repair. Disk Utility checks and repairs the disk.
    If you can not startup from any of the discs that you have (OS X Tiger or Disk Warrior) to make repairs, then your only choices are to seek help from either your friend or an Authorized Apple Service Provider.

  • I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it.  I need the videos out of there.  I have tried every way I can think of.

    Like the title says...
    I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it.  I need the videos out of there.  I have tried every way I can think of.
    I have also tried from the iphoto side, to export the videos or share them to final cut.  I have had no luck.
    I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
    I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible.  I see this on forums and youtube videos of the older versions.
    However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
    Thank You for the Help

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • HP 7280 all-in-one says ink cartridges are empty and will not print from PC, but it copies fine.

    Replaced 2 ink cartridges in hp 7280 but still says both cartridges are empty and will not print from PC, but it will copy fine.  When I try to print I get a error box that says "Ink cartridges empty - replace black and yellow ink cartridges to continue."  They are brand new - just bought them - expiration date Sep 2015.  Have tried rebooting and disconnecting and reconnecting everything.  Same error, but it still will do color copies fine - all cartridges are working.  Help?! 

    Hi tfmartin,
    I understand you have a Photosmart C7280 that you are unable to print to from your computer. I'm sorry to hear about this, but I will certainly do my best to assist you in resolving this issue.
    Before I can offer any suggestions I do need to know which version of Windows or Mac that you're using and how the printer is connected (wireless or USB). Once I have that information I should be able to help you better. In the meantime, if you're using Windows, please download and run the HP Print and Scan Doctor to see if it can assist with the issue at hand
    Hope to hear back from you soon! Have a great day
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Airplay stopped working and will not restart?

    A new airplay stopped working and will not restart - it is not recognized in the airport utility - yellow light flashing

    Thank you and yes it is an Airport Express.
    Reset router; could not locate the unit using the Airport Utility.....took back for an exchange under warranty as it was only a week old....no problems at store - exchanged for a new one

  • Hi Def video is jumpy and will not play back smoothly in FCPX

    I have the latest version of Final Cut Pro X only an older, but fully compatible IMac, and have a new Panasonic AG-Hmc 40P video camera. I have shot video on my Gro Prop Hero 2 and the playback of the unedited video is perfect, but as I scroll through the unedited footage shoot by the Panasonic, the video is jumpy and will not play back smoothly. The video plays perfectly on the the camera in play back mode, but in FCPX it is junk.
    Do I have an incorrect setting that is doing this? I adjusted the palynack in preference but that made no difference.  I need help?

    FYI...
    There's a hidden feature in Mac OS X Lion that you can use to convert your video footage to Apple ProRes with very little effort and to the right specifications...
    Bring your video footage into your desktop or hard drive and then select all of them, and then right-right click on one of them to bring up the options menu... select ENCODE SELECTED VIDEO FILES. Mac OS X will take care of the rest for you automatically.
    If this option doesn't show up, make sure to install those codecs I recommendad earlier...
    ProApps QuickTime Codecs v1.0.1
    http://support.apple.com/kb/DL1396

  • Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

    Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

    http://support.apple.com/kb/TS3281

  • My nano is stuck in "safe mode" still and will not update.

    The original problem:When I was trying to update my nano ipod to 2006-03-23 it ended up going to a black and white screen which said do not disconnect. The updater wouldn't work, it kept saying that the firmware (or whatever the name of the maker is) wouldn't work and that the update had failed. The my nano said it was ok to disconnect. When I did so it came up to the window that has a little folder on it and says check www.apple.com/ipod/support.
    So, I followed the five Rs, have reset the ipod, have reinstalled all the software, but now the ipod will not go past the black and white screen. I can load the ipod software but then the updater on the CD that came with my ipod won't work. Sometimes the updater says the ipod needs formatted sometimes it doesn't. Sometimes I'll get a little further in the updater where it will let me "restore" the ipod to its original factory state but then the restoration also fails.
    Now the problem: After trying several things from updating my Windows systems to removing spyware and firewalls from my computer, I'm now receiving this message when I try and update my nano: ipod service error. What can I do to get my nano to work? Is there an apple 1 800 number I can call?

    Try these...
    iPod shows a folder icon with exclamation point
    iPod Service Error
    Firmware Update Failure (If that was the error)
    btabz

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

  • My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

    My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

    Hello there, Capricious13.
    There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

Maybe you are looking for