Avchd imports into fcp 10.0.7 but choppy playback-even after using clipwrap

I am not sure where the problem may be. I record onto the sd card (16gb sandisk extreme class 10, 45mb/s) from brand new canon m500. Card is read in FCP X and can import but when I play back everything is choppy.
I am recording as avchd, mxp-used 60i frame rate & 30 frame both had same issue.
I tried clipwrap and that improved the first 5 seconds and then still choppy for the remainder.
When I playback the sd card inside the camera no problem-looks and sounds great.
If I look at the file on the sd card - after putting sd card in macbook pro (mid 2009-handles FCP just fine) or copying to computer it is titled as "private." I changed the permissions.
I am also using a canon hv 20 (mini dv)-absolutely no problems with import.
Any thoughts or ideas? I am on a deadline and losing a lot of time.

Thanks Alchroma & digibudIl--Iappreciate the quick reply.
I was able to figure out a solution very similar to the suggestion of changing the playback & optimizing media. Here is what I set up. With these setings, the playback of the file before import is still choppy. After import it is still choppy until the background tasks reach 100%-next to the timecode. Once 100% then it playsback smoothly with these settings.
I was using the internal hard drive on my macbook pro. My workflow is to (sometimes) use the internal hard drive and then transfer to external hard drive. Other times import to external hd.
What was interesting to me about the import process is with AVCHD, is that FCP X recognizes the file from the sd card as an avchd file. I did not need to save the files to another folder, create an archive etc. I tried all these with the same result as the simple import in FCP X.
One last question. The Canon M500 can shoot at a frame speed of 60i and 30. Is 30 lesser quality or is 60 better in some way. I will be editing the footage in FCP X.
Thanks again for the help and I hope my experience helps others.

Similar Messages

24fp importing into fcp 7

hi, im a total rookie sorry for the stupid questions but i shot a bunch of footage with the hv40 pf24 cinematic mode and im trying to import into fcp 7, what capture settings are the best to use and what sequence setting should i use

Check this forum, there is an editing section on it.
You should be able to find an answer there.
http://www.hv20.com/index.php
Message was edited by: Francisco Garcia

AVCHD: What is best way to import into FCP

What is the best way to get AVCHD footage into FCP? The program doesn't seem to support it directly. I'm new to video editing and Hi-Def in particular so any help would be appreciated.
Thanks in advance
Dave

Check this link for my complete AVCHD workflow, with the Panasonic HMC150.
http://finalcutprotips.wordpress.com/2009/02/15/avchd-workflow/

LiveType .ipr won't import into FCP - File type not recognized

LiveType file is greyed out when trying to import into FCP as a Standard File type. If we change Standard File to All Files we get an error stating, "File Error: 1 file recognized, 0 access denied, 1 unknown."
The project and media are on an external FWHD, originally edited on a G5, moved to the G4 FWHD with Media Manager.
We've trashed FCP preference files, repaired permissions, checked ownership of files on the FWHD, created new LT files on the internal drive to no avail.
Is it time for a reinstall of FCP Suite?
G4 Tower 1.42 Ghz Mac OS X (10.4.7)
G4 PowerBook 667 Mac OS X (10.3.7)
G4 PowerBook 1.67 Mac OS X (10.4.7)
G5 2.5Ghz Mac OS X (10.4.7)
iMac G5 1.8Ghz Mac OS X (10.4.7)

The project and media are on an external FWHD, originally edited on a G5, moved to the G4 FWHD with Media Manager. We've trashed FCP preference files, repaired permissions, checked ownership of files on the FWHD, created new LT files on the internal drive to no avail.< </div>
This is usually two things: In compatible versions of FCP or a missing element that allows the .ipr files to be imported. I have forgotten what the enabler is but it's obviously working on your G5 or you wouldn't be asking the question. If you create a LT file on your G4, can you import it into FCP on the G$?
(You can search the forum for similar problems, it comes up about twice a month.)
That leaves the problem of incompatible copies of FCP. You have not provided that information. FCP is not backwards compatible.
bogiesan

Motion project imported into FCP looks different...

I have a Motion project that moves 17 magazine covers across a background. When I preview it in Motion it looks great, but when I import it into FCP the mags overlap and run into each other. What could be happening during import and is there a fix??

I'm posting in response to my own question because this may actually be a bug. When I import the Motion project into FCP with the Motion layers locked, the animation is altered. When I go back into Motion and unlock all the layers and import into FCP, the animation is perfect. No kidding, locked tracks and the animation is funky, unlocked and it's fine. Anyone ever stumble on this??

Motion animation when imported into FCP comes out as 4:3 instead of 16:9

Hi,
I'm trying to create a bumper animation for my feature film. I started in Motion 3 created a simple animation and imported into FCP and flagged it for 16:9 but still comes ot as 4:3 when exported to Quicktime. Any ideas as to why?
Chris

Set the anamorphic flag. Click on you clip in the FCP timeline or browser and type ⌘9. Check the Anamorphic flag.
Patrick

After effects animation Codec won't import into FCP

Hi
I have used After Effects to do a green screen key on some HD 1080i footage.
I then went to export - quicktime movie - animation
I understand that the animation codec is the only way to export with an alpha channel so that I can put other footage in after my nice green screen key.
I set quality to best and frame rate to 25, I also tried frame rate as current and it exports and plays back fine in quicktime movie player, but won't import into final Cut.
The error message is "wrong frame rate"
Does anyone have any suggestions? I am quite new to after effects and wonder if there is something wrong with the way it is seeing the footage as I shot in widescreen and the image is squeezed as for a 4:3 TV aspect ratio.
Thanks.
Ajay

1. Check your AE composition settings (cmd-k) and be sure your frame rate is set to 25... AE uses the frane rate of your composition and not the settings in your export module...
2. Do not use the "export" command in AE... that is used only for special purposes only (i.e. for using "quicktime exporto compnents" not available under the export queue)...
3. use the "make movie" or "add to export queue" command instead
4. You expot module should be set as:
- best settings
- animation + alpha
do not specify any frame rate in the export module!! AE automatically uses the frame rate in your composition settings!!
5. Export and import into fcp...
I never had problems with AE animation+alpha and fcp 6.0.1

PSD Logo stretches when imported into FCP

I began work on a project awhile back and I am finally returning to it. In a previous thread I was explained how PSD and EPS files work and don't work in FCP. It was very helpful. (http://discussions.apple.com/thread.jspa?messageID=4144809&#4144809)
However, I've just noticed that all my PSD logos have stretched out horizontally and they have that lovely fat (incorrect) look to it. The original PSD files in PS looked fine after some tweaking, but as I said, the stretching only appeared once imported into FCP.
Any thoughts? Many thanks.

Hi:
Check the Distort settings in the Motion tab.
Alberto

Streamclip files wont import into FCP

I used a program called Streamclip to turn my movie into an MOV file. But it wont import into FCP 6. Are there any specific codecs I should be using?

Use the codecs that you find in the FCP easy set ups.
Those are editing formats.
My guess is that you want export to QuickTime NTSC DV 720x480, 29.97, aiff audio.
MOV means nothing; it is a container for the codec you selected.

Creating animations that will import into FCP

What are some program options for creating and manipulating objects like squares, rectangles and circles that will be used for creating animations to be imported into protions of FCP projects. The final output will be DVD's. Director MX2004 works very well for creating the animations, however when converted to a QT movie and imported into FCP, the animations look like a copy of a VHS tape. (Export settings were component video.) The animations are not acceptable when viewed on both a TV and NTSC monitor. Is anyone successfully using Director for such an application? I would certainally appreciate any suggestions.
G5 2 X 2 Mac OS X (10.3.9) G4 15" Power Book

I agree about the material that is coming out of Director being the problem.
The fundamental questions is "is Director capable of this kind of output?"?? I was hoping someone would tell me "this is how I did it" or "It is impossible using Director". All I know is there was some animation from Director in at least top movie a couple of years--I don't remember its name. So someone was able to get animation out of Director good enough for the film industry!
As for other questions you posed. The vector graphics I need can be created and manipulated as I need in Director. The whole project could be done in Director and outputed as a cross platform "projector" from a Mac or PC version of Director. However, there some issues with keeping things "in time" using Director. Using Director for the whole project is "plan B".
With regards to your other questions. In short, I want to animate some very detaliled shop type activities that are hard to video and understand. The animations will compliment the video and will show/simplify concepts needed to learn particular shop skills.
I want to make and market a series of DVD on these shop activites. Yes I know it is not a small project. I have been working on problems relating to everything from copyrighting to the insurance/liability aspects for several years. I also have the hardware & software to make DVD "demos" and examples to "show and tell". Now I need some help getting the stuff to do what I want/need!
FCP is the best option for "putting together" audio, video and amimation before making a DVD.
Thank you for your input.
G5 2 X 2 Mac OS X (10.3.9) G4 15" Power Book

I'm trying to burn my audiobooks on CDs. Got through three books just fine, then my CD/DVD drive "disappeared." I rebooted and got it back, but iTunes says, even after I un- and re-installed it, that it doesn't have the registries to burn CDs.

I'm trying to burn my audiobooks on CDs. Got through three books just fine, then my CD/DVD drive "disappeared." I rebooted and got it back, but iTunes says, even after I un- and re-installed it, that it doesn't have the registries to burn CDs. How can I retrieve this capability? My audiobooks are from Audible.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Firefox cannot load websites, but IE can, even after I tried all the ideas in the current articles on this topic as of March 10, 2011!

Firefox cannot load ANY websites, but IE can, even after I tried all the ideas in the current articles on this topic as of March 10, 2011!
One day it was fine, and the next day it stopped working! I have tried everything suggested under the topic "Firefox cannot load websites but other programs can."

You should e able to install FlashPlayer separately on IE and Firefox. So you may use Flash 11.3 on IE and 11.2 or 10.3 on Firefox.
Work from the administrator account. First of all sort out Firefox, use the Adobe uninstaller to uninstall Flash before reinstalling 11.2 Afterwards check that IE is ok, the Uninstaller may have changed that so you may need to reinstall Flash on IE.
* see instructions in [[flash 11.3 crashes]]
You are apparently using an outdated Firefox 8. That is not secure you should update to the latest Release Firefox 13 (or within a day or so Firefox 14)
You may also encounter problems relating to use of RealPlayer software and that software may affect use of FlashPlayer 11.3
* see also [[Fix problems with RealPlayer add-ons]]
* a user ''blacksabath710'' recently posted a workaround in [/questions/931055] suggesting use of free software from http://www.dvdvideosoft.com/
P.S.
When you finish set Firefox's FlashPlayer not to upgrade, and until this issue is resolved do not follow suggestions from Adobe, or Plugincheck etc. to upgrade Flash.
Use this test page form Adobe in each browser and account to check Flash is working ok
* http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
The test page will display version information and error messages or a Flash animation to prove flash is working.

I want all new windows to open in tabs but they dont, even after I have selected the option " Open new windows in new tab instead"

Al the details are in the question: I want all new windows to open in tabs but they dont, even after I have selected the option " Open new windows in new tab instead"

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

Make sure you quit all your applications before shutting down.
And try resetting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)

I have recorded a vocal track, but have no playback sound. The meter shows it's there, but no sound even after un-muting the track. I'm using Garage Band 10.0.2/Mac Mini ~Thanks

I have recorded a vocal track, but have no playback sound. The meter shows it's there, but no sound even after un-muting the track. I'm using Garage Band 10.0.2/Mac Mini ~Thanks

Check the output settings in GarageBand's preferences > Audio/Midi pane.
And in the System Preferences > Sound panel.
Also check the settings in Audio Midi Setup Utility.

Avchd imports into fcp 10.0.7 but choppy playback-even after using clipwrap

Similar Messages

Maybe you are looking for