AVCHD .mts files imported but optimised files play fast in QT and FCPX 10.1.1

Hi Guys
Panasonic HC-V700 AVCHD .MTS files (from within the 'Stream' folder) imported and optimised into FCPX 10.1.1 but the imported/optimised clips (found in the Transcoded Media>High Quality Media folder) play too fast in QT and FCPX 10.1.1 . Was able to do this fine until yesterday.
Using OSX 10.9.1 3.4 GHz Intel Core i7 with just 4GB RAM (hoping to get faster, souped-up new iMac very soon).
When playing the 1080/50p clips on the camera's video player they play at normal speed. Weirdly, today, FCPX has 'acknowledged' the camera on the import window despite the 1080/50p footage (previously it didn't show the camera as a valid import 'archive' on the import screen). Now, on the import window whenever I play a clip it also plays too quick.
Any thoughts or suggestions would be greatly appreciated.
Warm regards
Peter

When attempting to play the .MTS files in import I'm getting the 'dropped frames' error message:
"Issues that may affect playback include available memory, disk speed, graphics performance, and processor performance.
You may be able to get better performance by doing the following:
- Use proxy playback by changing the Media setting to 'Proxy' in the Viewer Options pop-up menu. (Requires proxy media.)
- Optimize your source clip media."
Could the lack of RAM in this iMac actually cause the video to speed up in FCPX? (weird)

Similar Messages

HT3775 How do I import AVCHD (.mts) files to iphoto and quicktime

How do I import,save, and play AVCHD (.mts) files to iphoto '11 and/or Quicktime?

First thing I'd try is deleting the iMovie Preferences. In the Finder, hold down the Option key and select Library from the Go menu. Navigate to the Preferences folder and find the com.apple.imovie.plist file and delete it.
Try opening iMovie.
If that doesn't work, restart holding down the shift key. It will run some disk checks (progress bar displayed), and then boot to the login window. It will say it is in safe mode on the login screen. Log in and check if iMovie works in safe mode.
From there, I'm not sure. Maybe boot into recovery hd and repair the disk.

Importing AVCHD .MTS Files - HELP

Since having kids, I have quickly become technologically-challenged and am looking for some help.
I have a Canon HG10 videocamera that is AVCHD and all the files are in .MTS format. I haven't been able to use this in years because the hard drive is full. Back in 2008, we were told that we could use FC Express to import the files, so we shelled out good money for it, but we quickly found out that we were given bad information. So since then, the camera has pretty much sat unused and is full of videos of my son as a baby. And now he's 6 and I have also had two baby girls since then. So I would LOVE to empty the camera and put it to some good use.
WHAT DO I DO FIRST???
I have a iMac running OS Lion 10.7.5 and iMovie '11. I'm trying to scour the forums for information, but since having kids I am completely ADD and don't have the patience for reading through outdated threads.
Questions:
1) Is iMovie '10 actually a newer version than iMovie '11?
2) Is it true that iMovie '10 will allow me to import the AVCHD/.MTS files directly off my camera?
3) If yes, is this the best way to retain the quality of the files? (Clearly I'm becoming computer illiterate, so I'm not trying to produce any award-winning documentaries, but I'd like to ensure the best quality possible.
4) I think I have external hard drives full of other .MTS files - not sure how I even got them on the external hard drives. I think I remember this being a problem before because I didn't keep the folder structure or something. Will I no longer have this problem?
THANKS IN ADVANCE!!!

since version 08, iMovie imports AVCHD
just select Import from Camera...
What's new in iMovie 13 aka v10 (which is newer than iMovie11, which was v09 ... no, this silly number scheme is not my fault!!!) is the ability to import mts without it's normal 'packing' as a AVCHD-structure.
It's no good idea to 'strip off' this AVCHD-structure - for future use, just copy the whole SDcard/cam hard-drive content into some folder onto some harddrive ...

Audio component not apearing when importing AVCHD .MTS files

When importing AVCHD .MTS files into Premiere Pro the Audio component is not available (also in After Effects and Media Encoder)
What am I doing wrong :/

You could most likely convert them using a program like 5DTORGB, and then pull them back into Premiere. Although there is a chance this won't work, however in most cases I find it usually does work. Just be prepared to lose your metadata.
If your on a PC I'd recommend downloading their beta version it will allow you to transcode your AVCHD to ProRes HQ.
http://rarevision.com/5dtorgb/
All you have to is provide them a correct email address and they'll send you a download link. When you transcode though keep in mind that it's going to make your file sizes much much larger, however this because ProRes is much less compressed than AVCHD video is. You do need to keep in mind though that ProRes HQ is visually lossless. If you chose to use another free converter program you'll most likely get stuck chosing a lossy format. Another nice thing though, is that it works on MAC too. Your shooter needs to know not to do this again though, because as you already know at this point. It can cause big issues...

Projects settings for AVCHD MTS files in Adobe Premiere Elements 8

Hello,
I have read several discussions already, about importing AVCHD MTS file in Adobe Elements (version 8), but I'm also confused a littlebit, so I would like to confirm if I'm correct.
FYI, I have a Canon Legria HFR26 camera and am using Adobe Premiere Elements 8 (with the latest updates installed).
According to the specs in the Canon instruction manual:
Videos are recorded in high definition using AVCHD specifications
(MPEG-4/H.264 compression).
Audio compression: Dolby Digital 2ch
The camera supports making video's in different format, but I have done it in the default SP format, which results in a resolution of 1440x1080 (50 fields per second, interlaced).
I have copied the video from the camera to my harddisk, and Windows also mentions the video's as AVCHD of 1440x1080 (Bitrate 7672kbps).
The frame rate is 25 frames/second. I assume this is correct for 50i?
So, when I import my video's into Adobe Elements 8, I select the following projects settings:
PAL, AVCHD, HD 1080i 25
Because the description matches my video files:
- For editing with 1440x1080i AVCHD camcorders.
- 16:9 interlaced HD video at 25 frames per second.
- 48kHz audio.
The video's are imported correctly and I can play them. However, as soon as I drop a video on the timeline, Adobe immediately starts background rendering the video (a red line appears on the timeline).
What I understand from some discussions, is that this shouldn't happen, because the video format doesn't match the project settings. On the other hand, I have also read that for Adobe Elements 8 this is normal behaviour and it always start background rendering AVCHD video's.
Is this expected behaviour or should I chance my projects settings or maybe even convert my video files to a different format?
Thanks,
Michiel

The ability to work natively with AVCHD files was not added until version 10, Michiel. So you'll still have to render while you work in version 8.

Streaming AVCHD MTS files to Apple TV

I am still in search of the holy grail I think... I have yet to be able to figure out how to easily grab my MTS files from my Mac and stream them *as is* without transcoding, converting, etc on my TV. I just bought new Apple TV not for that purpose but can't seem to find anywhere here if I can use it to to stream AVCHD MTS files to my HDTV. Does anyone know? thanks

I just bought new Apple TV not for that purpose but can't seem to find anywhere here if I can use it to to stream AVCHD MTS files to my HDTV. Does anyone know?
I hate to point out the obvious, but the normal practice is for the user to purchase the device that supports what he wants to do and not buy a device and the try to force it to do something it was not designed to do.
To begin with, QT does not support Transport Streams such as TS/MTS/M2TS at all and only supports muxed MPEG-2 Program Streams employing specific audio formats... and then not natively. In other words, your file containers are not compatible with the QT player built into the TV/TV2 device. And, even if you place the data in a supported container, the audio and video data may or may not be compatible with the player codecs embedded in the device firmware.
If your primary purpose is to stream content muxed in an MPEG/MPG/MTS/M2TS wrapper, it might be more prudent to purchase a device designed specifically for such content. For instance, I gave my wife, brother-in-law, and son TV2 devices for Christmas. However, my father-in-law insisted on a device the would play the videos from his camcorder and indicated that at 87 years of age, he had no intention of transcoding anything. As a result, I got him the LaCinema Mini HD device. While I cannot confirm that your files would be compatible with this particular device, it or something similar may meet your needs.
Basically, you have three options here:
1) You can convert your content to make it compatible with the TV device,
2 You can "hack" the TV device and modify its capabilities, or
3) You can buy a device that actually does what you originally want it to do.

FAQ: AVCHD MTS files

We have heard from a number of users who have reported an inability to apply markers to AVCHD MTS files because the .mts files were moved out of the folder structure created by the camera.
For example in this screenshot I demonstrate an MTS file that has been moved out of its original folder. Prelude can ingest this file and play it, however the Marker buttons are disabled because XMP cannot write markers for MTS files that are separated like this.
Instead it is important that the folder structure created by your AVCHD camera be maintained in its entirety. You can either copy the entire card to your computer then ingest from that, or ingest directly from the camera card and use Prelude to transfer the contents to a location on your computer.
When the entire folder structure is maintained you are able to add markers to the AVCHD clips.
If the original folder structure for your AVCHD MTS files is gone and your only option is to ingest raw MTS files you can transcode the clips using Prelude and Adobe Media Encoder by enabling the Transcode option in the Transfer Options. And if you create your own preset in AME it will appear as on option in Prelude.
The transcoded file is ingested into Prelude and you can add markers to it.

When attempting to play the .MTS files in import I'm getting the 'dropped frames' error message:
"Issues that may affect playback include available memory, disk speed, graphics performance, and processor performance.
You may be able to get better performance by doing the following:
- Use proxy playback by changing the Media setting to 'Proxy' in the Viewer Options pop-up menu. (Requires proxy media.)
- Optimize your source clip media."
Could the lack of RAM in this iMac actually cause the video to speed up in FCPX? (weird)

Does iMovie 11 support native AVCHD (.mts) files?

Native AVCHD file support is the first thing I expected for the new iMovie. Does iMovie 11 support native AVCHD (.mts) files? Or it has the same painful way of importing and converting AVCHD files to the other format like iMovie 09?
Is there any improvements for AVCHD file supports in iMovie 11?

I don't think it does. I picked up a copy this afternoon after the keynote (I like the way that Apple stores have them in stock right away - and at $49 it wasn't really a painful experiment) hoping this would be the case, but it does not appear to be so.
After installing, I tried to import some loose .mts files, but they are greyed out. Some brief exploring turned up nothing to help.
This is really too bad. It would be so nice to be able to save the individual .mts file on my hard drive, and access them when necessary. I'm fine with the intermediate encoding iMovie does before editing, but forcing me to use the silly file structure of my camera's hard drive, or an iMovie archive (basically the same thing) is frustrating.
Allowing the import of naked .mts files would be a huge step forward.
Assuming I'm not wrong about this, what is the best way to work around this? What is the best way to bring loose .mts files into iMovie? (And I hope I'm not hijacking the thread by asking this.)

My imported avi file plays in slow motion and staggers. what do i need to do to correct ?

My imported avi file plays in slow motion and staggers. How do i fix this ? I am newbie, just started AE but pretty ok with Photoshop. its AVCHD , 50 frames per second

You can update the latest drivers for Nvidia Card.
Try to run composition panel at a lower resolution .
Refer to this link .

.mov file plays great in QT and FC X, but only play video in Premiere. Audio want play in Premiere

.mov file plays great in QT and FC X, but only play video in Premiere. Audio want play in Premiere

Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
or
MOV is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
ADDED... this is a user to user forum, not Adobe support, so you need to be patient and wait for someone to answer... I deleted your two duplicate questions

I bought and downloaded the Movie Hannah on my iPad, but it only plays about 2/3 and freezes... Is there a way to re-down load?

I bought and downloaded the Movie Hannah on my iPad, but it only plays about 2/3 and freezes... Is there a way to re-down load?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Hi, my brand new iphone 4 will not play music through my music app but it will play videos through youtube and will play the sounds throught my games and will play text tones and facetime ect. what is wrong?

hi, my brand new iphone 4 will not play music through my music app but it will play videos through youtube and will play the sounds throught my games and will play text tones and facetime ect. what is wrong?

At least I'm not the only one with the issue. I was looking it up so see if others had the same problem and found a bunch of posts about it. I'm assuming it's not the phone then, it's the software. Should I bring it to the Apple Store? Replacing the phone seems stupid, because the phone isn't really the problem. It's the software! Maybe the iOS 5.0.2 will fix it??? I don't really want to wait though, it's a pain. If a lot of people have this issue it should get Apple's attention. They need to do something to fix it, ASAP!

Rewrapped AVCHD MTS files not playing correctly

I'm using a Panasonic HDC-TM700 camera to record 1920x1080 60p. The camera records to the AVCHD format which yields a .MTS file. Final Cut Pro X still does not support importing from this camera. I've tried the various tricks mentioned in these forums such as creating a camera archive, importing directly from the SD card, using Panasonic's AVC CAM restore tool, etc. Nothing has been sucessful, so it looks like it's back to re-wrapping the .MTS file to a .m4v file. To do this, I'm using the Rewrap2M4V apple script combined with ClibGrab as described in other discussions. My newly wrapped m4v clips play just fine in Quicktime Player. The movie inspector reports a FPS of 59.94 and a resolution of 1920x1080.
When I import these clips into Final Cut, however, I see two green or black empty frames about every 28-30 frames. This occurs when I'm previewing the clip from the event library and when the clip in in the timeline. The timeline is set to 1920x1080 59.94p, though I've tried 60p and saw the same behavior.
When I export the clip to a h.264 .mov file, I don't see the green or black blank frames, but the picture is garbled in those places.
For what it's worth, I've installed the updated QT codecs. Any ideas?

I don't know what conversion engine clipgrab uses, but i have had success with the old Final Cut Express using ffmpeg based software to re-wrap the .MTS files from my panasonic GH2. I use Media Converter (an ffmpeg front-end) and if you go to their presets page you'll find presets i made to do it. Give that a shot maybe. Another thing you can try to do if that still does not work is a 'standards conversion' of the re-wrapped video to ProRes in JES Deinterlacer.
good luck!

No sound when importing AVCHD MTS files into premiere cs5.5

Hello
I have footage that was shot with the sony nx sf-100 and it is ACVHD mts files.
when I import the files to the bin, it is being imported without sound (no sound track at all when dragged into the timeline).
The footage has sound - that has been confirmed.
I am working in an AVCHD sequence and I'm importing the files using the media browser.
There are many refrences to this problem online - but all give the solution of recompresing the videos in a new format, although every documentaion cliams that premiere is supposed to take AVCHD natively including sound.
Does anyone have a solution for this?
Thanks,
Oded

My apologies. I beleive I mixed up my versions for support. 5.5.x should support PCM audio. Thank you, Jeff.
I have confirmed that I am indeed getting audio with files from a Sony NEX FS-100 camera, with CS5.5.2 on my systems. Oded, would it be possible to send me a sample file that exhibits this issue for you?
Things to try are deleting your Media cache (Preferences > Media > Media Cache Database, click Clean button). Make certain that your copy of Premiere Pro is activated: check under Help menu you should see "Deactivate..." noted.
Thank you.

Adobe Premiere CC2014 AVCHD mts files no sound restricted Dolby encoder - solution?

I wanted to import mts files from a Sony NEX VG10 Video camera. They are AVCHD files = .mts. This works perfect in premiere Pro CS6. Also in my school in Bruges with Premiere Pro CC version 7 something. But with premiere Pro CC2014 (school in Brussels) I can import the files perfectly for video, but the clips do no have sound. Premiere gives a fault message: Dolby audio decode licensing restricted.
On the forum people say that for CC2014 Adobe doesn't pay licensing to Dolby and this is the reason. But this looks nonsense to me. Suddenly making a program useless?
Of course I can rewrap the files... But then I can as well stay with FCP and would be very much better of with AVID. So.... who can tell me and give a solution to this problem.
Thank you.
Joost.

I forgot to say... We use mac.

AVCHD .mts files imported but optimised files play fast in QT and FCPX 10.1.1

Similar Messages

Maybe you are looking for