Avchd sony sr11 problems importing it will not - help

i can see the mts files but they are sort of grey, no thumbnails and it never lets me select the file to import, what are the steps to follow and or what is up. tried full res and large size settings both, waited over 20 minutes for it to allow selection but gave up. have mixed res movies some 1920 some 1440 but no sd, some slow mo clips that are 240 frames per sec? problem? is there a third party software that does not require rendering to new for tgmat that will just work cause imovie08 is not compatable if you have to jump thru so many hoops. why cant i select the clips it sees thanks

thanks for joing in. may be a space problem or even a bad file, not sure , should work from what i have read. had trouble on ms machine too. will post back. thought someone else might have already run in to unable to select problem. guessing this means i could do it if there was not an issue. figuiring out the issue is problematic. later

Similar Messages

  • Having problems with Verizon iPhone 5 using excessive data. Verizon will not help can anyone give me advice? Have family plan never went over 8gb of data in 6 years, now avg 14 a month and are not using anything different other than having iPhone 5.

    Switched to iPhone 5 on July 31st.  Since then our data usage has doubled.  Verizon will not help find out what the problem could be, they claim they are unaware of a problem.  I told them to look on the customer support page and many have complained about the problem.  Now on the apple site I see it may be an apple problem.  Some one needs to fix this.  Apple you want us to use your products, please do t make it cost us more money just to do what we did prior without problems.  Prior phones were iPhone 4 and we never had issues and never went over 8 gb's for 4 phones.  Now we are doing 14.  Can anyone tell me what is going on.  Getting ready to stop using cell phones all together.

    Well you could Restore it from your backup and see if that helps. If it doesn't Restore it as new and manually add things back until the problem starts again.
    I would also suggest trying a different SIM.
    Without iOS 7 there is no way to isolate what is using the data.

  • I have a Macbook pro 2009 with Snow Leopard.  Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

    I have a Macbook pro 2009 with Snow Leopard.  Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

    It will make it easier to help you w/ your problem to know the  size and RAM installed.
    "Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
    What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
    I'd say Lion if your Garmin is compatible.
    Both Lion and Mountain Lion are downloadable from the Apple Store:
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    The OSs will get more resource hungry the higher you go.

  • Help!  I have an iMac 24" OSX version 10.6.8 my iphoto is having problems.  It will not open properly.  All I get is the little wheel going around and around.  My iphoto is iphoto'11 version 9.2.3(629.52)  What should I do to make it work properly?

    Help!   I have an iMac 24" OSX version 10.6.8.  My iphoto is having problems.  It will not open properly.  All I get is the little wheel going around and around.  My iphoto is:  iphoto'11 version 9.2.3(629.52).  What do I need to do to remedy this?  I recently installed InstallMac.  I don't want this on my computer.  I don't know how to get it off.  I'm afraid that is what scrogged my iphoto.  Can anyone tell me how to correct this situation?

    Re: iPhoto:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • SAP Adapter has a problem, SOD violations will not be checked

    Hi,
    In our ides server whenever i click save button in su01 i get the following error ,
    "SAP Adapter has a problem, SOD violations will not be checked !
    Please check with your system Administrator
    Technical Info:
    Error when opening an RFC connection "
    we didn't have this problem before . can anybody help me to resolve the issue
    Also I am getting this error only if I click save in su01. in other t code. I don't get this error
    Thanks in Advance
    Edited by: gajula jhansi on Apr 11, 2011 11:28 AM

    You need to restart your sap adapter in GRC front end from configurations tab-->Sap adapter >choose the one for your back end system> if it's grayed out or even green still, click on it and let it restart and turn green again.
    Then you go back to your backend ECC system and in SM59 , choose the RFC connection for the Risk Terminator (the one you have saved in the Risk Terminator transaction /VIRSA/ZRTCNFG in backend system).. and test the connection. It should pass the connection test if your adapter is working and set up correctly. Then when you do save in SU01 or make changes in PFCG and have Risk Terminator activated for the backend system, it will check the SOD violations against those transactions from RAR front end.
    If you don't want Risk Terminator to check for SOD violations in front end RAR, then you need to set your settings to 'NO' for all in the Risk Terminator transaction. You can get all this info in the GRC config guide for RAR and SPM area.
    Regards,
    Alley

  • Photoshop 11 continues to not load right away and continously freezes. How can I fix this problem as I've been informed that Adobe will not help me.

    Photoshop 11 continues to not load right away and continously freezes. How can I fix this problem as I've been informed that Adobe will not help me.

    This has been going on for months for me. Time to drop Firefox & go back to IE.

  • The import window will not expand to access the import button

    the import window will not expand past the cancel button. can not access the import button.

    Can you post a screen grab illustrating what you are experiencing.
    Tony

  • My email address got into hundreds of solicitors.  I now have 703 emails from all sorts of businesses.  Apple will not help since I am not signed up with their $79 support I cannot afford more bills.  Can someone tell me how to stop this, not unsubscribe

    How do I delete and stop all of the unwanted 702 emails that are coming into my acct on my iPad. Sure there are more coming now.
    Frontier will not help unless I agree to a costly protection.  Apple says I have to have their extra contract or pay for a one-time fee.
    I cannot use my acct on my iPad this way.

    Not something I would suspect Apple could help with. The most obvious solution is to,change your email address. You might also check with your email provider and see if there an any anti-spam settings on the server that would help.

  • My daughters ipod touch is disabled because of a wrong passcode.  I have tried many times to log onto to Itunes and it will not help without a passcode and is not recognizing the itouch as a device, but the USB is functional.  Do I need Itunes to fix this

    My daughters ipod touch has been disabled because of a wrong passcode.  After 2 days of trying to get into Itunes, it will not help without a passcode and is not recognizing it as a device even though the computer is recognizing the USB.  I know I have to do a complete recovery, but can I do this without Itunes (or Icloud)?

    You cannot do this without itunes on your computer

  • I'm trying to up grade the os but I keep getting the startup disk is full I ordered more memory I was told this will not help. What do I do?

    I'm trying to up grade the os but I keep getting the startup disk is full I ordered more memory I was told this will not help. What do I do?

    I think as drive capacities increase, the old 10-15% becomes less accurate.  The amount of free space you need doesn't really have anything to do with the drive size.  So, increasing your drive size shouldn't mean that you need to have more free GB (which using a % of drive space would mean).  You need free space to accommodate page outs (the amount of which would depend on how much RAM you have installed and how memory intensive the applications are), sleep images (again, this would max out at your total amount of RAM), and a bit to minimize fragmentation.
    With desktop drives commonly in the 2TB range today, it is certainly not necessary to have 200GB+ free in order to maintain proper operation.  I generally find about 30GB to be the minimum I'm comfortable with.  Mind you, I pretty much always have way more than that available.  But, if I'm working on a system and the amount of free space is at least 30GB, I would generally not site drive space as the cause of any performance issues.  I'd say that 30GB is a minimum for a stable system (with 8GB or RAM installed).  Of course at that amount, you would still need to free up space if you were to want to install or download any significant amount of data.
    With servers being more likely to run into the 16GB of RAM range, more storage would be necessary.  Most servers should be well stocked with storage, but the actual needs would vary greatly depending on what's being "served".
    The 10-15% thing came about when we used to talk about drive capacities in hundreds of MBs and RAM in terms of KB (not MB and certainly not GB).  More drive space is always a good thing, but as drive capacities continue to sky rocket, we don't need to dedicate larger amounts of storage on systems with the same specifications.  A set amount of space is required for proper operation regardless of the capacity of the drive installed.

  • I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone

    I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone know where I can go for help?

    You won't be able to install your original Acrobat 7 at all, or use your original serial number. The server which used to allow this was switched off.
    But assuming you have a compatible system, like Mac OS 5 or Windows XP, licensed users of Acrobat 7 can download a replacement and get a replacement serial number.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • I have old MacBook running OS 10.6.8 I was told in Apple Genius Bar that I need a code from apple support to upgrade to 10.7.   Apple support will not help because I am have their support plan.  Can some one help?

    I have old MacBook running OS 10.6.8 I was told in Apple Genius Bar that I need a code from apple support to upgrade to 10.7.   Apple support will not help because I am have their support plan.  Can some one help?

    hi Samberl
    thanks a lot for the fast reply.
    I was dragging folders from main folders on the laptop-desktop  onto the external drive icon - to copy them across....
    Your suggestion sounds very promising -  I didn't know about 'cloning'.
    Yes the idea is to backup the laptop -    I thought I would just move it all now, new - and then keep saving/dragging physically   across to the new drive myself each day or two...
    Would this be the sizeof the internal hard drive = c.500 gb  ?   =   under the HD icon on desktop is written  : 
    " 499.76gb , 311.5 gb free  " 
    I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
    I have found CCC [carbon copy cloner] googling - looks good.
    When CCC site says it backs up  the hard drive - would this  mean all my files  [over 100 gb] that are mostly  in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon,  would all copy across successfully [wherever they are in the computer ]  ?
    thanks again, hope you can clarify these things and then I will go for it. 
    It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
    Julie

  • Sony a7 mk2 ARW files will not import

    I have a Sony RX100 and LR 5.7 imports the ARW files ok, However I've just bought an A7 Mk2 and Lightroom will not import the ARW files from that camera. I've downloaded CameraRaw 8 so I can convert the files first and then import into LR, but it seems strange that I cant import and convert from withing LR itself.

    Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5856
    Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5857
    Use the links above to upgrade to LR 5.7.1 or if you have a Creative Cloud account subscription login to your account and check if there is a button indicating "install" available next to Lightroom and proceed to click the button and install the update.

  • Imported iTunes will not let me play or authorize my purchased music!

    Hi,
    I upgraded the hard drive in my trusty MacBook Pro, and then put my old HD in a usb enclosure and used Migration Assistant to transfer over my old stuff. The music I had from my CDs transferred over without issue.
    The problem is, the music I had purchased from the iTunes store. When I go to play these songs, I get the authorization window with the option to enter my Apple ID to authorize this computer. Well, I had already authorized this computer right after I transferred these songs to it.
    I originally had used my old AOL account for purchases etc. I tried that username and password. No luck, it tells me I have to update my account. (I have, before I had swapped my hard drive, updated my account when I bought an iPhone 4 and MobilMe, but we will get to that in a minute).
    So, I clicked 'update,' figuring I will simply enter my new information and this will all be over with, but no! I get a screen that says "Your Request Cannot be Completed. Make sure your computer's date is set correctly and that it accepts cookies from the iTunes Music Store. For detailed solutions to resolve this issue, click More Info."
    I clicked 'More Info,' which is of no help, as it takes me to a iTunes for Windows XP Windows 2000 support page with no solution that works. I set my Safari preferences to accept all cookies (something I don't want long term, but figured would do for this and then switch once I got MY music back.) Also, my date and time are set correctly. I scoured the help for a solution, but cannot find one.
    So, I repeated this process, clicked on a purchased song, and tried entering my updated ID and PW. I get a message window saying "This Computer is Already Authorized. Including this one, you have authorized 3 computers out of your available 5." And, the purchased music still will not play!
    So, I next de-authorized my computer and reauthorized it again. Which had no effect, as what I described above still occurs the same way and I cannot play some of my favorite songs which I did the right thing and paid for and now can only look at their titles wistfully.
    So, I am hoping there is someone out there who can help me get my groove back with a solution to this problem. Help please!
    Thanks,
    Grugi
    Message was edited by: Grugi

    this was a know problem with older ipods, I had to go to the apple store and they traded me up to a new nano
    I had the exact same problem, interesting, sometimes when you completely re-load the device, it wouold work for a couple of days, and then not play purchased songs.
    Go to an apple store and let them know about this, it is their problem to fix.
    I would guess, if you connected a nano, this would not happen

  • I have had LR4 since last August.Have just decided to start using it.I have an IMAC 10.9.3 version. Am trying to learn with "Classroom in a Book. Ton of  problems.Adobe will not help because it is to old and they no longer support. Can anyone tell where I

    Did anyone see the post I made about LR 4?Just in case I will post again. I have LR4 I bought last August and just now I am trying to learn this >I have "Classroom in  a Book" for LR4 lots of problems . I have a IMAC version 10.9.3. I tried different Adobe sites. They will not give me the Time of day because they say they no longer support this program. Can anyone here tell me where I can get support for this LR$ that Adobe no longer recognizes. Thank you My name is Jerry S. MY e-mail is [email protected] and phone number is 563-344-7910.

    Okay I will try. First I have lost pictures in catalogs and could not find again.I have tried reinstalling LR4 and when I do and reopen LR4 the same catalog appears in the panel and filmstrip and I have no idea how to get rid of that catalog and start over at square one like it was the frist time it was opened. That would be a big help and I think I start over and avoid the same problems.

Maybe you are looking for