AVCHD support - Does Lightroom 5 support the 60P 28MBPS setting ?

The link here says AVCHD is supported : http://helpx.adobe.com/lightroom/kb/video-support-lightroom-4-3.html
but there are many cases whereby other software (ie Aperture) says they support AVCHD but in reality not all settings/varieties.  Before I commit to a purchase, can someone actually confirm that the 1920x1080 with the 60P and 28MBPS setting on my Panasonic G5 camera will actually work OK on Lightroom 5, thanks a bunch.

Yes, download Lightroom 5.7
Mac Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7
Windows Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7

Similar Messages

  • OATS CPU does not support the SSE2 instruction set required to run JRockit

    Hello,
    I am trying to get the OATS agents to work on some injector machines, however, when I try to start them I get the following error:
    "[ERROR] Your CPU does not support the SSE2 instruction set required to run JRockit.
    Could not create the Java Virtual Machine."
    Is there a way to configure OATs to use the Sun JDK instead? I have the Sun JDK in my path and JAVA_HOME set accordingly, however that doesn't seem to make a difference. Alternatively, is there a workaround to this problem?
    Thanks,
    Michael.

    Hi Tab,
    In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
    http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
    One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
    If you have any feedback on our support, please click
    here.
    Regards,
    Elvis Long
    TechNet Community Support

  • 010SM: ...does not support the initial proposed set of capabilities...

              While I was testing a data extraction servlet that takes a sql statement from an HTML form document, I got the following errors in the jdbc log. I don't understand what the jdbc log entry is telling me.
              Here's my configuration:
              jdbc 20 connection with jConnect 5.2 driver
              Weblogic Server 5.1
              Perhaps you can help me.
              regards,
              Jackle
              SQLWarning: reason(010SM: This database does not support the initial proposed set of capabilities, retrying.) SQLState(010SM)
              SQLWarning: reason(010SM: This database does not support the initial proposed set of capabilities, retrying.) SQLstate(010SM) vendor code(0)
              java.sql.SQLException: JZ006: Caught IOException: java.io.IOException: JZ0EM: End of data.
              at com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:426)
              at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:2794)
              at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java, Compiled Code)
              at com.sybase.jdbc2.tds.Tds.logout(Tds.java, Compiled Code)
              at com.sybase.jdbc2.tds.Tds.login(Tds.java:359)
              at com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java, Compiled Code)
              at com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:190)
              at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:169)
              at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:122)
              at com.sybase.jdbc2.jdbc.SybDriver.connect(SybDriver.java:175)
              at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:149)
              at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:109)
              at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java, Compiled Code)
              at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java, Compiled Code)
              at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:330)
              at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java, Compiled Code)
              at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
              at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
              at java.lang.reflect.Method.invoke(Native Method)
              at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
              at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled Code)
              at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
              SQLException: SQLState(JZ006)
              registerDriver: driver[className=weblogic.jdbc20.jts.Driver,weblogic.jdbc20.jts.Driver@78bf9ff2]
              registerDriver: driver[className=weblogic.jdbc20.pool.Driver,weblogic.jdbc20.pool.Driver@64b39ff2]
              

    Reduce the complexity of the SQL statement until you do not receive the
              error. Add back the functionality until it breaks. At that point, you can
              see what feature that the driver/database does not support.
              Peace,
              Cameron Purdy
              Tangosol, Inc.
              http://www.tangosol.com
              +1.617.623.5782
              WebLogic Consulting Available
              "Jackle" <[email protected]> wrote in message
              news:[email protected]...
              >
              >
              > While I was testing a data extraction servlet that takes a sql statement
              from an HTML form document, I got the following errors in the jdbc log. I
              don't understand what the jdbc log entry is telling me.
              >
              > Here's my configuration:
              >
              > jdbc 20 connection with jConnect 5.2 driver
              > Weblogic Server 5.1
              >
              >
              > Perhaps you can help me.
              >
              > regards,
              >
              > Jackle
              >
              >
              > SQLWarning: reason(010SM: This database does not support the initial
              proposed set of capabilities, retrying.) SQLState(010SM)
              > SQLWarning: reason(010SM: This database does not support the initial
              proposed set of capabilities, retrying.) SQLstate(010SM) vendor code(0)
              > java.sql.SQLException: JZ006: Caught IOException: java.io.IOException:
              JZ0EM: End of data.
              > at com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:426)
              > at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:2794)
              > at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java, Compiled Code)
              > at com.sybase.jdbc2.tds.Tds.logout(Tds.java, Compiled Code)
              > at com.sybase.jdbc2.tds.Tds.login(Tds.java:359)
              > at com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java,
              Compiled Code)
              > at
              com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:190)
              > at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:169)
              > at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:122)
              > at com.sybase.jdbc2.jdbc.SybDriver.connect(SybDriver.java:175)
              > at
              weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connection
              EnvFactory.java:149)
              > at
              weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connection
              EnvFactory.java:109)
              > at
              weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.j
              ava, Compiled Code)
              > at
              weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java,
              Compiled Code)
              > at
              weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:330
              > at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java,
              Compiled Code)
              > at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
              > at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
              > at java.lang.reflect.Method.invoke(Native Method)
              > at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
              > at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled
              Code)
              > at
              weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
              > SQLException: SQLState(JZ006)
              > registerDriver:
              driver[className=weblogic.jdbc20.jts.Driver,weblogic.jdbc20.jts.Driver@78bf9
              ff2]
              > registerDriver:
              driver[className=weblogic.jdbc20.pool.Driver,weblogic.jdbc20.pool.Driver@64b
              39ff2]
              >
              >
              

  • Does Lightroom work within the Photoshop program?

    Does Lightroom work within the Photoshop program?

    Yes...and no. Lightroom can allow raw (and TIFF, PSD & JPEG) adjustments to an image all by itself without using Photoshop. But...you can take those adjusted images (adjusted using the ACR/LR processing pipeline) and then open those images into Photoshop for further image manipulation and retouching. So, it would be more accurate to describe Lightroom as a front end to Photoshop if the image adjustments can't be done completely in Lightroom. It's not an either or, it's a one then another sort of deal.

  • Does Netweaver 7.0 support the AL32UTF8 character set?

    We are running Netweaver 7.0 for a Vendavo solution running on Oracle 10.2.   We have created the Vendavo schema within the same database as Netweaver.  Vendavo documentation states the character set be AL32UTF8.  SAP sets the character set on Netweaver install to just UTF8.  Does anyone know if Netweaver 7.0 supports changing the DB character set to AL32UTF8?
    Thanks.

    Hi,
    Yes you can as AL32UTF8 is a superset of UTF8 - this is supported. Please check the following note.
    https://service.sap.com/sap/support/notes/456968
    The above note also discusses how to change database character sets.
    Also check the following FAQ SAP Note on Oracle Character Sets.
    https://service.sap.com/sap/support/notes/606359
    Moreover the SAP NW 7 installation sets the Oracle NLS to UTF8 which is find. Note NLS and Database character set is not the same,please check the following sap note for the same.
    https://service.sap.com/sap/support/notes/669902
    Hope this helps.
    - Regards, Dibya

  • Why does Lightroom disappear from the Creative Cloud manager?

    Today may be a special case.  Now I have "Photoshop CS6", "Photoshop CC", and "Photoshop CC (2014)" on my list of apps.  But Lightroom appears on the list of "try/install" as "try", even though I am paying for the Photoshop/Lightroom combination.
    In weeks past, Lightroom would disappear from the installed list, and would not be anywhere on the list.  I would have to quit the CC manager and restart it to have it rediscover my apps.  No other application ever does this, just Lightroom.
    Martin Fish

    Hi Martin,
    Sign out from the Creative Cloud desktop app. Click here to know how.
    Sign in back.
    Sarika

  • HT5409 AVCHD audio does not play with the video clip

    iPhoto does not import, or even see the clips, and when QuickTime played the clip off the card itself, no audio is present even though the inspector shows stereo.              

    Morning Remigijus Biciunas,
    Thanks for using Apple Support Communities.
    Some devices don't appear in the regular import view of iPhoto. You can still use AVCHD video from these cameras by dragging and dropping or menu-driven imports.
    For more information on this, take a look at this article:
    Using AVCHD video with iPhoto '11
    http://support.apple.com/kb/HT5251
    Hope this helps,
    Mario

  • Does Lightroom 6 correct the super slow cropping issues that a Retina iMac has with LR5?

    I've had huge timing issues with Lightroom 5 on a brand new, loaded, Retina iMac.  These are the worse when cropping and straightening.   Photos are RAW from Canon 5DmarkIII and Canon 7D.

    Hi,
    Have a look in the system.log file for a IOkit timeout.
    I had a problem with my Imac from purchase, it turned out to be a problem with the firewire port.
    If there is a IOkit Timeout during boot-up, check to see if your system profile can seethe firewire port okay(no warnings).
    If there is a problem with firewire, you can disabling it by moving all the IOFire*.kext file out of the
    system/library/extentions folder.
    Hope this helps,
    Steve

  • The iCloud id on my iPhone does not change to the new one set up with iCloud on my MacBook Pro Maverick

    I have recently upgraded to Mavericks and bought an iPhone 5s. Initially I used the id already registered with Apple but changed it after a few days having used it on both my phone and MacBook Pro. Once I changed my id on the website, my MacBook Pro is fine but my phone has not synched the new id although any changes I make to Calendar, Notes, Contacts, etc do synch between them - puzzling. How can I change the id on my phone - in Settings it does not appear to be possible.
    I am on OS 10.9.2 & iOS 7.1
    Many thanks for your help.

    Go to website.
    Change it back.
    You will have 2 minutes to delete iCloud from iPhone.
    Change it to new one on website and verify.
    Sign in new one on the phone.

  • Voice mail does not give me the option to set it up?

    When I touch the voicemail icon it dials directly to the voice mail.  There is no option to setup greeting or use speaker or delete or replay...

    Yes.  It is active and I am receiving messages.  The thing is that when I touch the phone icon and then the voicemail icon it does not show the Voicemail screen where I can change the greeting  or choose to listen by speaker or call back button option or delete button option..... It just calls the voicemail box directly.

  • Cat0-3750 upgrade. Error: system number 1 does not support the same feature

    I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
    Ios Image File Size: 0x00877A00
    Total Image File Size: 0x00B04200
    Minimum Dram required: 0x08000000
    Image Suffix: ipservicesk9-122-37.SE1
    Image Directory: c3750-ipservicesk9-mz.122-37.SE1
    Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
    Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
    Error: The image in the archive which would be used to upgrade
    Error: system number 1 does not support the same feature set.
    Any ideas?
    Chris

    I was having the same issue even with entering the following:
    archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    I noticed the image which was running on the switch was correct without the ".bin" at the end:
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
    I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
    3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!
    Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
    [OK - 24893440 bytes]
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
    Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    examining image...
    extracting info (100 bytes)
    extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
    extracting info (100 bytes)
    System Type:             0x00010002
      Ios Image File Size:   0x017BDA00
      Total Image File Size: 0x017BDA00
      Minimum Dram required: 0x08000000
      Image Suffix:          sm10g-150-2.SE7
      Image Directory:       c3kx-sm10g-mz.150-2.SE7
      Image Name:            c3kx-sm10g-mz.150-2.SE7.bin
      Image Feature:         IP|LAYER_3|MIN_DRAM_MEG=128
      FRU Module Version:    03.00.78
    Updating FRU Module on switch 1...
    Updating FRU FPGA image...
    FPGA image update complete.
    All software images installed.
    Worked for me, hope this helps.

  • Does Alertframework (ALM) support the SAP Office (Inbox)?

    Hi,
    The alerts are polled from the UWL of the Enterprise Portal, application-specific display programs, or the alert inbox. These display programs can be personalized due to the useru2019s needs. In addition, the users can receive alerts as e-mail, SMS, and fax, if these external methods of communication are configured in SAPconnect. End users can personalize their alert notifications, for example, create notification variants or determine a substitute.
    Integration
    Besides Email, can ALM send the notification to receivers' Inbox?
    How?
    Thanks,
    Miao

    another question:
    Does the ALM support the function to set email "sender" dynamically?
    From the API, it is no. I'd like to know if there is any possibility with other methods?
    Thanks,
    Miao

  • What is supposed to happen if the font for a control on the startup form does not exist on the system?

    Say you put a button on a form and dont change the font ie ms san serif, then the app is installed on a system that does not have the font ms san serif installed. Is it supposed to throw an error when the form initializes? Since this happens before any user
    code the error can go untrapped in the start up form and crashes to the system.
    I discovered it does this if you specify the font in the designer to be "Arial Narrow" and it is not installed. But whats funny is the error is not font does not exist, it is "Arial Narrow" does not support style Regular. Even though
    I set the font in the IDE for the control. How can I be setting it with the IDE to something that does not exist for the font I set (Arial Narrow is on the IDE system)?
    I have always thought that vb would just use a different font if the control font did not exist without an error. In my case it was a secondary form so the error was trapped. But, I don't see how to trap the error if it is the startup form.

    PS
    "I meant that you should set the buttons font to something like
    MS Sans Serif "
    What if ms sans is not on the system? Then you cant do anything.
    Maybe I am being picky but just sayin...
    I don't suppose you're being picky specifically although I think I got a headache attempting to do the below.
    I do think this is a bug though which you should probably report.
    However I tried this and it worked fine. Except I had to alter the Form1.Designer.vb file to do this. I tested this. I didn't test without this to see if I would get the exception you received.
    I downloaded a Font called Kingsthings Christmas from the second link in my post for links to download fonts. Added that to my systems Fonts and tested the code. Removed that from my systems fonts and tested the code. It worked in both instances.
    I suspect that the Font in the Form1.Designer.VB file for the New Font for the TabControl and TreeView would work with the default system font set to use 21.75! and font style regular but if the default system font didn't support both of those then an issue
    could occur obviously. So if somebody used Control Panel to set the default system font to something that doesn't support those two things then you will need to alter the code to detect what the default system font can use for those two settings
    possibly.
    Form1's code
    Option Strict On
    Imports System.Drawing.Text
    Public Class Form1
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    Me.Location = New Point(CInt((Screen.PrimaryScreen.WorkingArea.Width / 2) - (Me.Width / 2)), CInt((Screen.PrimaryScreen.WorkingArea.Height / 2) - (Me.Height / 2)))
    TreeView1.BeginUpdate()
    TreeView1.Nodes.Add("Parent")
    TreeView1.Nodes(0).Nodes.Add("Child 1")
    TreeView1.Nodes(0).Nodes.Add("Child 2")
    TreeView1.Nodes(0).Nodes(1).Nodes.Add("Grandchild")
    TreeView1.Nodes(0).Nodes(1).Nodes(0).Nodes.Add("Great Grandchild")
    TreeView1.EndUpdate()
    For Each f As FontFamily In New InstalledFontCollection().Families
    RichTextBox1.AppendText(f.Name.ToString & vbCrLf)
    Next
    End Sub
    End Class
    Form1.Designer.VB files code which you're not supposed to alter of course.
    Option Strict On
    Imports System.Drawing.Text
    <Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
    Partial Class Form1
    Inherits System.Windows.Forms.Form
    'Form overrides dispose to clean up the component list.
    <System.Diagnostics.DebuggerNonUserCode()> _
    Protected Overrides Sub Dispose(ByVal disposing As Boolean)
    Try
    If disposing AndAlso components IsNot Nothing Then
    components.Dispose()
    End If
    Finally
    MyBase.Dispose(disposing)
    End Try
    End Sub
    'Required by the Windows Form Designer
    Private components As System.ComponentModel.IContainer
    'NOTE: The following procedure is required by the Windows Form Designer
    'It can be modified using the Windows Form Designer.
    'Do not modify it using the code editor.
    Dim FontToUse As Font
    <System.Diagnostics.DebuggerStepThrough()> _
    Private Sub InitializeComponent()
    For Each f As FontFamily In New InstalledFontCollection().Families
    If f.Name.ToString = "Kingthings Christmas 2" Then
    FontToUse = New Font(f.Name.ToString, 24)
    Exit For
    Else
    FontToUse = New Font(SystemFonts.DefaultFont.FontFamily.Name.ToString, 24)
    End If
    Next
    Me.TabControl1 = New System.Windows.Forms.TabControl()
    Me.TabPage1 = New System.Windows.Forms.TabPage()
    Me.TabPage2 = New System.Windows.Forms.TabPage()
    Me.TabPage3 = New System.Windows.Forms.TabPage()
    Me.TabPage4 = New System.Windows.Forms.TabPage()
    Me.TabPage5 = New System.Windows.Forms.TabPage()
    Me.TreeView1 = New System.Windows.Forms.TreeView()
    Me.RichTextBox1 = New System.Windows.Forms.RichTextBox()
    Me.TabControl1.SuspendLayout()
    Me.SuspendLayout()
    'TabControl1
    Me.TabControl1.Controls.Add(Me.TabPage1)
    Me.TabControl1.Controls.Add(Me.TabPage2)
    Me.TabControl1.Controls.Add(Me.TabPage3)
    Me.TabControl1.Controls.Add(Me.TabPage4)
    Me.TabControl1.Controls.Add(Me.TabPage5)
    Me.TabControl1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
    Me.TabControl1.Location = New System.Drawing.Point(6, 32)
    Me.TabControl1.Name = "TabControl1"
    Me.TabControl1.SelectedIndex = 0
    Me.TabControl1.Size = New System.Drawing.Size(600, 183)
    Me.TabControl1.TabIndex = 0
    'TabPage1
    Me.TabPage1.Location = New System.Drawing.Point(4, 43)
    Me.TabPage1.Name = "TabPage1"
    Me.TabPage1.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage1.Size = New System.Drawing.Size(592, 136)
    Me.TabPage1.TabIndex = 0
    Me.TabPage1.Text = "TabPage1"
    Me.TabPage1.UseVisualStyleBackColor = True
    'TabPage2
    Me.TabPage2.Location = New System.Drawing.Point(4, 43)
    Me.TabPage2.Name = "TabPage2"
    Me.TabPage2.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage2.Size = New System.Drawing.Size(592, 136)
    Me.TabPage2.TabIndex = 1
    Me.TabPage2.Text = "TabPage2"
    Me.TabPage2.UseVisualStyleBackColor = True
    'TabPage3
    Me.TabPage3.Location = New System.Drawing.Point(4, 43)
    Me.TabPage3.Name = "TabPage3"
    Me.TabPage3.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage3.Size = New System.Drawing.Size(592, 136)
    Me.TabPage3.TabIndex = 2
    Me.TabPage3.Text = "TabPage3"
    Me.TabPage3.UseVisualStyleBackColor = True
    'TabPage4
    Me.TabPage4.Location = New System.Drawing.Point(4, 43)
    Me.TabPage4.Name = "TabPage4"
    Me.TabPage4.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage4.Size = New System.Drawing.Size(592, 136)
    Me.TabPage4.TabIndex = 3
    Me.TabPage4.Text = "TabPage4"
    Me.TabPage4.UseVisualStyleBackColor = True
    'TabPage5
    Me.TabPage5.Location = New System.Drawing.Point(4, 43)
    Me.TabPage5.Name = "TabPage5"
    Me.TabPage5.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage5.Size = New System.Drawing.Size(592, 136)
    Me.TabPage5.TabIndex = 4
    Me.TabPage5.Text = "TabPage5"
    Me.TabPage5.UseVisualStyleBackColor = True
    'TreeView1
    Me.TreeView1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
    Me.TreeView1.Location = New System.Drawing.Point(9, 229)
    Me.TreeView1.Name = "TreeView1"
    Me.TreeView1.Size = New System.Drawing.Size(704, 235)
    Me.TreeView1.TabIndex = 1
    'RichTextBox1
    Me.RichTextBox1.Location = New System.Drawing.Point(9, 475)
    Me.RichTextBox1.Name = "RichTextBox1"
    Me.RichTextBox1.Size = New System.Drawing.Size(702, 124)
    Me.RichTextBox1.TabIndex = 2
    Me.RichTextBox1.Text = ""
    'Form1
    Me.AutoScaleDimensions = New System.Drawing.SizeF(6.0!, 13.0!)
    Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font
    Me.ClientSize = New System.Drawing.Size(720, 606)
    Me.Controls.Add(Me.RichTextBox1)
    Me.Controls.Add(Me.TreeView1)
    Me.Controls.Add(Me.TabControl1)
    Me.Name = "Form1"
    Me.Text = "Form1"
    Me.TabControl1.ResumeLayout(False)
    Me.ResumeLayout(False)
    End Sub
    Friend WithEvents TabControl1 As System.Windows.Forms.TabControl
    Friend WithEvents TabPage1 As System.Windows.Forms.TabPage
    Friend WithEvents TabPage2 As System.Windows.Forms.TabPage
    Friend WithEvents TabPage3 As System.Windows.Forms.TabPage
    Friend WithEvents TabPage4 As System.Windows.Forms.TabPage
    Friend WithEvents TabPage5 As System.Windows.Forms.TabPage
    Friend WithEvents TreeView1 As System.Windows.Forms.TreeView
    Friend WithEvents RichTextBox1 As System.Windows.Forms.RichTextBox
    End Class
    La vida loca

  • Support for Russian Character Set

    What would you recommend as the NLS_LANG vaule for Oracle to support the Russian Character set. There are a few available like RU8BESTA. Which is recommended.

    Hi Ger,
    I need a little more information to make any suggestion. Is Russian the only language you intend to support? What is the client(s) OS that will be connecting and inserting data in the database?
    null

  • Does Lightroom care about camera color space settings?

    I am using a NEX 7.  Color space options on the camera are sRGB and AdobeRGB.  Does Lightroom care about the camera color space settings when it sees RAW files?

    Colorspace is used in-camera for creating the jpeg preview embedded in the raw file (and/or jpeg sidecar).
    The colorspace is embedded in the jpeg sidecar, and so Lightroom will respect it.
    The colorspace is *usually* NOT embedded in the raw preview (although in my opinion it should be). Its in the raw file as proprietary metadata.
    All camera manufacturer softwares respect the colorspace for initial raw preview, but Lightroom does not.
    (Lightroom doesn't attend to any proprietary metadata, except white balance).
    Cheers,
    Rob

Maybe you are looking for

  • How to delete record from table control in BDC?

    Hello friends, I am running a BDC program to delete records. I have file with following records and i got these records into t_itab. Material     Plant     Start date     End date     Cost MQ100001     S001     09/01/2008     09/31/2008     55.00 MQ1

  • How to append in an encoder created file

    I'm using XMLEncoders and XMLDecoders for storage of java objects. Currently I've tried on simple data types only. But the problem is if I want to operate on the XMLEncoder created file from two different programs, then it is giving errors. In one pr

  • Pls tell me difference between case and decode

    Hi all pls tell me difference between case and decode regards

  • May be answered, but can anyone confirm for sure?

    This question has had some responses so far, but can anyone confirm for sure, that with iWeb '08, you still need to publish to a folder if you are not publishing to .mac? What exactly is the "personal domains" feature, if publishing from within iWeb

  • How can we call WinAPI's from java... any idea... its urgent

    Hi all, I am facing a problem, I want to call Win API's form Java. any idea.. Any win API.. like GetUserNameA.... (it fetches current user logged in). Its bit urgent guys... i have always counted on u guys... Thx & Regards @mit