AVCHD to Blu Ray Standard DVD Workflow

Anyone out there taking AVCHD Footage into Final Cut Studio? Do you take your HD Footage and burn it to a Standard DVD in AVCHD format? What's your workflow? I can't seem to make a good disk!!
Thanks in advance.

Thanks for the link. I'd seen it before and was doing everything that he was, but wasn't coming up with good results. I had posted a slightly different issue on this forum and found the solution to my problem.
See this thread for more info:
http://discussions.apple.com/thread.jspa?threadID=2179309&tstart=0
Thanks.

Similar Messages

Best workflow for burning Blu-ray and DVD

Hi,
What's the best workflow for effciency sake for burning both a Blu-ray and a DVD of the same project?
Essientially I'd like to export and create a menu once, then be able to downrez to DVD. However, I'm not sure that is possible since blu-ray and DVD are differnt codecs.
Thank you

The only way that you can get acceptable re-scaling of menus is to go from BR to DVD, and do the editing in Photoshop. Simply re-scaling the menu here will not give acceptable results.
I usually copy the various button layers from the BR menu to a new DVD menu file created using the provided Photoshop preset. You will still have to do some manual re-scaling and alignment. The thing that has given me the most trouble over the years is round button highlights - a segment is often chopped off. Font sizes will probably need adjusting too.
Unless you are adept with handling layers and groups within Photoshop, it may be easier to start again.
Any attempt to convert within Encore is unlikely to produce acceptable menus in my experience.

Unable to play Blu-Ray or DVD through MediaSmart on HDX 18

My drive has the Blu-Ray symbol on it, so I know it's supposed to have Blu-Ray capabilities, but every time I put a Blu-Ray OR DVD in, MediaSmart DVD pops up and says "No disc loaded in drive." However, I am able to run DVDs through Windows Media Player. So, what's wrong with my MediaSmart? Is there another way to play Blu-Rays?

I have been having this problem for close to 10 months (since I bought my HP laptop). I didn't care initially because I could use other players to play regular DVDs and CDs. I was in a fix when I tried to watch my first movie in Blu Ray disc. I tried multiple installs and re-installs but couldn't get it to work. I however got to a point where it would say the "Disc is ready, hit the play button", but when I hit the play button it just flashed the screen (adjusting screen display) for a second and then did nothing. I finally called HP support and they walked me through regular install and install as per their process. When the initial instructions didn't work, I on my own did two things while on call.
1. I first Un-installed my antivirus software, just to make sure it doesn't interfere with any of the other activities being instructed by the support staff since they were related to drivers.
2. I had a Divx player and converter installed in my machine. Just on random thought of driver conflicts I went ahead and un-installed all the Divx related software. It asked me for a restart and bingo. When the machine rebooted, HP mediasmart DVD was able to play the Blu Ray disc.
I don't know which of the un-installs did it. My guess is it probably was Divx or a combination of both. I then asked HP support to stop going through rest of the process. He advised me to update the BIOS and software for fingerprint device which I did and it solved another problem for me. I saw the whole movie without too many issues. Once issue I found was when I paused the play using keyboard and resumed the sound went away. I then had to close and restart the movie. Based on above experience, I would advice anyone else having same problems to first un-install all the free DVD/CD/Blu Ray player software from the machine, then proceed with un-installing antivirus (if necessary at all. You can install it back again). I haven't tried re-running the blu ray disc after re-installing the anitvirus. I will re-post any problem here if I find any issue. That would also nail down the culprit.
Hope this helps so some of you.

FCP X fails to share to blu-ray or DVD, no chance to trash com.app...plsit from lion, what to do?

I burned some Blu-Ray before with my new FCPX, now I get a "Failed" message when I try to share both Blu-Ray and DVD to hard drive for an image or actually burn a disc. I saw one answer was to trash the com.apple.final...plist files but I do not know how to do it from the new Lion OS, any help?

Tom,
Thank you so much. It trashed the files and now FCPX is burning my Blu-Ray :-)

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output?

When I import my Sony video, which is in m2ts format, the file size is a few times larger. This affects the volume of clips for creating the blu-ray or DVD discs. How can I squeeze the file size without sacrificing the quality of output? Is there any other ways of achieving this?

wongrayd wrote:
Thanks. I do not have the experience on burning discs from iMovie for the movie after editing (ie for video discs players). It seems that i cannot find the relevant command in the tool bar for this purpsoe. Would you please show me the way?
The command is gone because iDVD has been discontinued by Apple. After Apple discontinued iDVD they removed the iDVD burning link from iMovie. I still use iDVD sometimes, only because I have an old copy.
wongrayd wrote:
You have mentioned about Handbrake as a converter. What is the RF no. (under Constant Quality) meant? It seems that the smaller the no. is, the better quality will be. What is the optimal no.? or should we use the Average Bitrate? Again, what is the best rate? Furthermore, which format is more suitable or the best: H264 or mpeg 2/4?
I don't know what RF means. When I have used HandBrake, I've used presets that apply to what I want to do, so I don't know the meaning of each individual setting. However, it appears that many of them are listed in the HandBrake User's Guide that is linked from the Help menu in the program:
https://trac.handbrake.fr/wiki/HandBrakeGuide
wongrayd wrote:
For iMac, except iMovie, what other software is the best for the amateur? I have read Photoshop. Can this support m2ts files and user friendly?
Photoshop is not amateur-level software, and although it can edit a video, it cannot burn a DVD. Unfortunately, because I still use iMovie, I haven't tried anything else. You might want to read the reviews of various DVD-burning applications in the Mac App Store.
And maybe another forum member will jump in and help us here!

Deal of the Day 6/10/13, Mamma Mia on Blu-ray and DVD

We've got Mamma Mia! on Blu-ray and DVD as part of our Deal of the Day offers for 6/10/13! Follow the links below to take advantage of this great pricing!
Mamma Mia! - Blu-ray Disc
Deal of the Day price: $9.99
Regular price: $14.99
You save: $5
Mamma Mia! - DVD
Deal of the Day price: $4.99
Regular price: $9.99
You save: $5
These prices are only available for 6/10/13, so act fast. Be sure to also view the rest of our Deal of the Day offers for 6/10/13 and sign up for email alerts so you never miss out.
Matt|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Hello outlawmen,
Our Deal of the day offers are only valid on their specified day and this offer was only good for 5/11/13. While the movie itself is still available, it would no longer be at the Deal of the Day price.
Sincerely,
Matt|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Upgrade to Blu-Ray Optical DVD-RW for HP DV-5

Ok, thanks to MumboDog my hard drive issues are fully resolved. Thanks MumboDog. Now my next question is I've been having problems with the button not opening my optical drive. I can bypass the button with the paper clip trick, but who wants to carry a paper clip with them?
So I was wondering if I could remove this drive and install a blu-ray optical dvd-rw for the HP DV-5? Anyone have suggestions on where to buy, model no., or any suggestions as to a temporary fix to my current situation. By the way, the drive shows up in the BIOS but its currently not reading any cd's or dvd's. Could I be missing a driver? I did install the LightScribe drivers, got all current updates and installed Windows 7.
Thanks in advance for any and all of your thoughts and suggestions.

Use device manager to uninstall the DVD drive, reboot and let windows reinstall it automatically, see if it works now.
The problem with upgrading optical drives in notebooks is the the tray bezel is unique to each model, and some are not removeable so you cannot transfer it to the new drive.
I use to buy generic optical drives from electronics retailers to replace broken ones in notebooks, take the old bezel off and transfer it to the new one, this way it looks like it belongs on the notebook like the original, but I have noticed they are no longer removeable on some models, so if you want it to look right you need to order it from HP.
USA
http://welcome.hp.com/country/us/en/contact_us.html
Everywhere else
http://welcome.hp.com/country/us/en/wwcontact_us.html

Best settings for highest quality results, Blu-Ray vs DVD

I am shooting AVCHD 1080p 60fps with a JVC GC-PX100, using a Windows 7, i7-2600 3.40Ghz., 8Gb.RAM, 1 TB HDD with PE11 and a Pioneer Blu-Ray writer drive.
I'm looking to find the best settings for replay on a 55" HDTV. I have tested both BD and DVD without seeing very much difference between the two as far as video quality is concerned,
but I want to make sure I'm using the right settings for the best quality on both drives. Can someone please offer a step by step settings procedure for both BD and DVD, also which do you
think is the better route to take between the two?
Also, I have noticed there is a ghosting image after letters/numbers on faster moving content (like railroad cars) on my video even before transferring it, can anyone give some insight to what that might be and if there may be a solution ??
Many thanks for your anticipated help.

Rikko
Thanks for the reply.
Referring back to your post 4.
Additional info: When I published my test video for DVD I chose “Computer” on the Publish+Share drop-down list, then chose MPEG, Presets: HDTV 1080p 29.97 High Quality.
Saved and burned to DVD. I also did the same choosing AVCHD Presets: MP4 – H264 1920x1080p 30. Saved and burned to DVD
Let us clarify. When the end result is "...burned to DVD" in either case, are saying that you take your saved file to DVD-VIDEO on DVD disc or AVCHD on DVD disc, using another Premiere Elements 11 project on Windows 7 64 bit.
My post numbered 1, contained the step by step for taking your 1080p60 Timeline directly to DVD-VIDEO on DVD disc or Blu-ray disc format on Blu-ray disc.
If you are going to introduce intermediates in your workflow (Timeline content saved to file and then burn to disc), then I would offer the following scheme
a. 1080p60 project preset (project 1)
b. 1080p60 Timeline saved to file via
Publish+Share
Computer
AVCHD
with presets = MP4 - H.264 1920 x 1080p30 (and then under the Advanced Button/Video Tab, customize the export settings for 1080p60 instead of 1080p30)
c. Import that back into Premiere Elements 1080p60 project (project 2) and burn to disc DVD-VIDEO on DVD disc, AVCHD on DVD disc, or Blu-ray disc format on Blu-ray disc..
This is another alternative interpretation to your saved and burned to DVD.....in one project, you are doing two different exports...one to a file saved to the hard drive and after than the burn to disc (be it DVD-VIDEO on DVD disc, AVCHD format on DVD disc, or Blu-ray disc format on Blu-ray disc). If this is the case, there is no "intermediate".
There used to be the discussion about HDV to DVD-VIDEO format on DVD disc - whether HDV file should be imported into the project as source or whether the user should downsize the HDV to DV widescreen in the camera before import into a DV Widescreen Premiere Elements project. As we getting into this type of question with your 1080p60 to DV widescreen?
Please review and consider. And, then please let me know if any of the above addresses your considerations.
Thanks.
ATR

PE 7 Freezes while encoding AVCHD to Blu-Ray

As thte title states, I have a movie comprised mostly of AVCHD clips. It is a pretty big movie, at close to 3 hours, and I am having trouble encoding it to Blu-Ray. I have tried several things - increasing the RAM allocation to 3 GB, turning off the screensavers and power savers, turning off antivirus scanning, booting into Windows 7 64-bit with nothing but PE7 installed and trying to encode from there, etc. and it freezes up every time. The last time it got to 93% and froze. I'm at a loss at what to do next except just maybe wait until a new version of PE comes out.
I can even downconvert it to a regular DVD DL and it worked fine. At this point, I'm not sure what to do. Anyone else having this problem?
I am mainly using:
Win XP pro 32-bit
2.4 GHz Core 2 Duo
4 GB RAM
NVIDIA GeForce 7900GS
LG GBW-H20L Burner
Oh, and when it crashes, the RAM usage is only at about 40%, so I'm not running out, and there are no error messages - it just freezes.
Mark

Three hours of AVCHD (which is challenging to work with anyway) is probably too much to work with.
You don't say how much free, defragmented hard drive space you have but, unless it's a hundred or so gigabytes, that too could be a challenge.
I'd recommend doing a test run with 1 hour, or even half an hour, of video -- just to make sure everything is working.
But the fact that when you downconvert everything works fine seems to indicate that you've just overwhelmed your system.

Settings For HDV to Blu-ray and DVD

What is the best strategy for avoiding unnecessary rendering and transcoding issues? I edit HDV or AVCHD (from a DataVideo DN-60) in Premiere Pro CS6. I want to output to multiple formats - DVD, Blu-ray and Flash from the same project. I'd like to maximize quality as well to fit project on disk.
I'd also like to know which format most easily transcodes for my purposes. I typically shoot 23.98 or 29.98 fps 1080p, but sometimes 1080i.
I assume Dynamic Link is the way to go, but it doesn't look like the resulting settings are automatic. For example, if I go into project settings after Dynamic Linking a PPro sequence, and choose Blu-ray, I would expect the transcode settings to match the imported project. If it does not, then what should I change the default settings to?

Let me clarify the intent of my original post. I have read in places that it is best to choose export and DVD project settings that match the original footage whenever possible to avoid rendering problems. So, if I shoot and edit HDV or AVCHD footage say at 29.98 fps progressive, then what corresponding settings should I use for DVD and Blu-ray?
I see that with 29.97 fps the progressive option is not available in the Blu-ray
presets. Should I not shoot progressive then at 29.97?
How do I maximize quality of the video while fitting on a single disk? The only way to do it automatically is to Dynamic link, which you advise against. If I manually set exports, then I must calculate all the sequence outputs from Premiere. What then should my priorities be? For starters, MPEG2 Blu-ray or H.264 Blu-ray? What should take precedence, bitrate settings or number of passes?
I am also considering render/transcode speed. How do the above settings affect speed?

My supermulti blu-ray cd/dvd drive will not play or burn dvds...only says no disc found...HELP?

I cannot play dvds or cds on my supermulti blu-ray dvd drive. hp mediasmart player says no disc found.....an hp support assistant troubleshoot found nothing wrong with the drive and several searches for drivers says that no updates are necessary in that area either.......i'm not sure what to do now.....

try this: http://support.microsoft.com/kb/314060

HDV to Blu-Ray and DVD questions!

So I shot a bunch of footage that I need to turn into a DVD and Blu-Ray. I have some questions regarding these 2 issues.
First of all, I captured all the footage HDV settings 1440 x 1080. I am using Final Cut Pro 5. I am having some issues with the footage trying to multicam edit. It's making me render it out, which takes about 8 hours for 20 minutes.
What is the best way to go from HDV back to DV so I can put it on DVD? Can I export straight from the HDV footage to mpeg2 or is there a different way I should go about it?
My next question is. For Blu-Ray video, how do I export the HDV footage in FCP so I can use it in Adobe Encore? Any help with these questions would be greatly appreciated. Thank you!

The easiest way to convert HDV to DV is to use the camera or deck to do this Down Convert.
Edit and export to Compressor for DVD.
Multiclip editing is not something I can help you with as I haven't had any success with it.
For Encore you could export as a self contained .mov then import into Encore. You might want to try working with Compressor first.
Good Luck
Z1

AVCHD to Blu-Ray - Audio Out of Sync

I just burned a test disc from FCP 7 to Blu-Ray using my Mac Pro's SuperDrive and, thusly, AVCHD. The video looks great on my 42" LCD (played from an LG Blu-Ray player), but the audio is slightly out of sync. I'd say it's about 10 frames or so behind the video. Anyone else experience this? Any ideas how to solve it?

Another thing to try is to make sure that your sequence is fully rendered before export. Not sure the level of your fcp experience, but making sure everything's fully rendered is not intuitive. If the thin lines at the top of the timeline are all blue, you're fully rendered.

Model # BDV-N8100W - Blu-ray Disc DVD Home Theatre System

Serial Number Location: At the rear of the unit.
Attachments:
Warranty_455717203.pdf ‏111 KB
BDVN8100W_mksp.pdf ‏250 KB
BDV-N7100W_N8100W_N9100W_qs_EN_ES.pdf ‏2891 KB
BDV-N7100W_N8100W_N9100W_install_EN_ES_FR.pdf ‏1200 KB
BDVN7100W_N8100W_9100W.pdf ‏5293 KB

I found that 32522 worked the first time when all others didn't.Set the volume lock as per the insrtuctions and wala!dickgoode wrote:
HELP ??? I cannot find a code that works between my COMCAST Infinity Silver/Platinum Remote Control and my SONY combination Blu Ray DVD Player and Receiver called the SONY BD/DVD Home Theatra System Model BDV-E500W. Can you help me find the programming code to program up Comcast Remote to control the functions of this SONY DVD Player & Receiver ??? Thanks so much !!!

Model # BDV-N7100W - Blu-ray Disc DVD Home Theatre System

Serial Number Location: At the rear of the unit.
Attachments:
BDVN7100W_mksp.pdf ‏238 KB
Warranty_455717203.pdf ‏111 KB
BDV-N7100W_N8100W_N9100W_install_EN_ES_FR.pdf ‏1200 KB
BDV-N7100W_N8100W_N9100W_qs_EN_ES.pdf ‏2891 KB
BDVN7100W_N8100W_9100W.pdf ‏5293 KB

I found that 32522 worked the first time when all others didn't.Set the volume lock as per the insrtuctions and wala!dickgoode wrote:
HELP ??? I cannot find a code that works between my COMCAST Infinity Silver/Platinum Remote Control and my SONY combination Blu Ray DVD Player and Receiver called the SONY BD/DVD Home Theatra System Model BDV-E500W. Can you help me find the programming code to program up Comcast Remote to control the functions of this SONY DVD Player & Receiver ??? Thanks so much !!!

AVCHD to Blu Ray Standard DVD Workflow

Similar Messages

Maybe you are looking for