Average price during good issue for a vehicle

Dear Experts,
I have a little doubt about how to manage valuation with vehicles, using VMS.
I understand that the standard VMS solution mantains a valuation type for each vehicle (for each batch for the specific model), am I right? .
We have a requiriment in my client, that the price calculated during goods issue (the cost) should be the average pice for each model, and it shouldn't be the cost for he specific vehicle.
Is it posible to manage it with batch valuation in VMS?
Could I deactivate batch valuation for vehicles in VMS? Or do we have any other choice?
Thanks for your help!
Best regards,
Ignacio

Hi Ignacio.
Batch management is required in VMS (http://help.sap.com/saphelp_dimp50/helpdata/EN/91/88c43ace7a3b46e10000000a114084/frameset.htm)
In which scenario your customer wants to have an average valuation?  Most of the vendors, in a sort of best practice of the industry, use batch valuation.
Regards.

Similar Messages

  • Automatic goods issue for outbound delivery, during the transfer order confirmation

    Hello,
    Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
    Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
    Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
    Thanks in advance.

    Hi Iiya
    Check the below setting, might be helpful

  • Override consignment price  determination during goods issue process

    Hi ALL,
    My requirement is that User is asking want to override consignment price  determination during
    goods issue process. Is there any BADI/User Exit or  Enhancement spot which can override the price value and in the
    database level during Goods issue.
    If yes provide me the enhancement details and where I can implement.
    I will very thankful to you all if I get your valuable input.
    Regards
    Subhasis

    Dear Laxman,
    Check these links,
    https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
    Automatic batch determination
    Re: how to make the batch determination process automatic
    Regards
    Mangalraj.S

  • Why decimal Places are allowed during goods issue and Goods receipt for mat

    Why decimal Places are allowed during goods issue and Goods receipt for material with unit of measure PCS.
    MY config allows consumption in decimal places.
    How to restrict this?
    Prem Nivas

    Hi,
    Please check in customizing UOM (T code-CUNI).
    In dimensions check the decimal point for the unit of measurement.
    Regards,
    Krishnendu.

  • Difference in GR price and goods issue price

    hi all,
    we are facing problem in difference in goodsrecipt price and goods issue price.
    material is maintained with moving average price.
    we do GR  (101) for full month and the last day we do goods issue for some quantities. (201 mvt type)
    while chekcing the material  price, goods issue price is less than the goods recipt price.( total value / total stock )
    what is the possibilities of the difference and where we can identify the changes.?
    price also not updated through MR21.
    regards,
    Vinay

    hi vinay,
    Please check the order prices for the material. Are you purchasing the material from a single vendor or multiple vendors? What is the price that you have maintained for each vendor in the info-records? If you have maintained different prices, the valuation of your material will keep changing with each GR since your material has price control V. During GR, the P.O. price is taken. During GI, the Moving Average price is taken from material master. When you do the goods issue at the end of the month, the Moving average price AT THAT POINT OF TIME  is taken for posting to the Consumption Account / Stock Account. Hence, you will have a difference in the GR / GI values. I suggest, after every GR, you go to MB03. Check the material document and the accounting document. Alongside, look at the Accounting View of the material and note the M.A. price. When you do the GI, note the M.A. price.
    Revert back if not clear.
    Regards,
    Rahul.

  • MPN Manufacturer batch determination during goods issue

    I am from pharma industry and my business runs with batch management, MPN features.
    Scenario:
    I have 3 different finished product P1, P2 and P3. All three finished products use raw material R1.
    But, I have restrcition like, when I am manufacturing P1 product I can only use R1 of batch from manufacturer M1.
    For P2 material we can use R1 batch from manufacturer M2 only.
    For P3 material we can use R1 batch from manufacturer M1 and M2.
    Now, I have maintained the BOM CS02 batch classification for three differ FGs P1, P2 and P3 with relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    In COB2 T-code I am mainmtaining strategy type CO02 - Order type/Plant/Parent material with child relation ship. Here also, I am maintaining relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    Now, when I am creating process order in COR1, I am getting in case of P1 order R1 material batch determination only batches from M1 manufacturer.
    Same as for P2 material process order R1 material only batches for detrmination from M2 manufacturer.
    Same as for P3 material process order R1 material batch determination option from M1 and M2 only.
    Now, if I don't go for batch determination through Process order and in stead of that if I want the batch determination during goods issue MIGO 261 movement against order, the above manufacturer level control we can't put.
    As in MBC2 T-code, we have standard batch determination and search strategy for material, plant and movement type.
    But, here we can't maintain any parent child relationship.
    Now, can you please suggest how I can control manufactuer batch detrmination as per above strategy during Migo goods issue.
    Through any standard settings we can do or, any exits required?
    Gurus please suggest!

    Dear
    You can do this by using FM CO_WB_BATCH_DETERMINATION or VB_BATCH_DETERMINATION function module.
    here you can sort the batches and compare the Batch results with the batch search strategy.
    Regards,
    R.Brahmankar

  • Automatic batch determination during goods issue

    Hi,
    We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction.  Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
    Thanks & Regards,
    N. Laxman

    Dear Laxman,
    Check these links,
    https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
    Automatic batch determination
    Re: how to make the batch determination process automatic
    Regards
    Mangalraj.S

  • Automatic Batch Determination during Goods issue of Production Order

    Hi,
    Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
    I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
    Thanks and Regards
    Enrico

    Dear Enrico
    It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
    Configuration Required for your above issue are as follows :
    1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
    2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
    4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
    Create Condition Tables
    Create Access Sequences
    Create Strategy Types
    Batch Search procedure definition
    Batch Search procedure allocation and check activation
    Define Selection classes
    Define sort rules
    Maintain Batch Allocation Strategy Number Ranges
    All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
    5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
    6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
    7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
    Refer the below link for your farther reference :
    http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
    Hope this will be useful
    Regards
    JH
    Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM

  • Batch determination based on fifo during goods issue

    Hi All,
    My client requirement is that system should propose automatic batch during goods issue based on goods receipt.
    I have activated batch wise split valuation.
    I have maintained  characterstics with MCH1 table and HSDAT.
    Assigned to class and class is assigned to stratergy type.
    Created sort sequence and sort rule ascennding.
    Assigned this to stratergy type.
    Maintained condition record also.
    During goods issue to production system is not proposing the batch based on gr date.
    System is not stopping me while making goods issue with other batch.
    Please guide to fix the above issue.
    Regards,
    Venkatesh

    Split valuation has nothing to do with this problem.
    I hope you do not just require the sequence for physical goods issue  to be FIFO because your year end valuation will be FIFO method, as this is not necessary for FIFO valuation.
    IMG > Ligistics general > batch managment > batch determination > Allocation of batch determination schema and activation >...
    here you set the box for batch check active, which means if a batch is entered manually  then this batch is checked against the batch determination and an error is issued if the wrong batch is entered.

  • How to allocate cost variances during goods issue in sales process?

    Hi all,
    In China GAAP, cost variances ( variance between standard cost and actual cost) should be capitalized to balance sheet at month-end.
    Q1: Could I settle the cost variance to a B/S account instead of P/L account? What's SAP or your recommendation?
    Q2: if we settle the cost variances to a B/S account, How could we allocate the production cost when post goods issue for sales order? i.e
    Dr: COGS
    Cr: cost of finished goods
    Cr: production cost (B/S account, cost variances by proration of sold)
    Please advice.Thanks in advance
    Regards,
    Alex LIU
    Message was edited by:
            Shuping Liu

    Hi,
    All variances between Standard & Actual cost should be settled to a P/L A/c as these are similar to Purchase Price variances on Raw Material purchases.
    If you are valuing your Finished Goods @ Standard cost, then the difference between the Standard & the Actual cost should be debited or credited to a Price or Cost difference P/L A/c either at the time of doing the GR of the Production or at the time of posting the Goods Issue for Sales Order.
    The balance in the Cost difference accounts needs to be finally posted to profitability segments in COPA.
    Regards,
    Assign points if useful.

  • Error during goods issue-Posting period not open

    Hi ,
    I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
    Thanks,
    Hari.

    Hi,
    Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
    So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
    Hope it helps. Please reward if useful.
    Thanks & Regards
    Sadhu Kishore

  • DESADV is not generated during Goods issue from VT02N.

    Hello,
    DESADV is generating during goods issue from VL02N.
    But DESADV is not generated during Goods issue from VT02N.
    Any idea what was missing?
    I maintained the variant of RV56ABST for Delivery message with output type LAVA and Medium 6 (EDI).
    Thanks,
    Venkat

    I got reply from SAP. It is as follows:
    Please goto tcode VL10CUC. For Profile 2000, please check whether
    indicator "No OutputDet." is flagged.
    Please unflag that indicator and then retest.
    Please read note 1410599 for more inforamtion.
    Thanks,
    Venkat.

  • Goods issue for Individual PO

    Hi friend,
    when doing third-party "Individual PO" (item category group BANC, item category TAB) , do we do a Goods Issue?
    If so, what transaction for Goods Issue do we use (MIGO, MIGO_GI, MIGO_TR, MB1A, VL01) ? What Movement Type
    gets triggered when we do a Goods Issue for "Individual PO" ?
    Also, in the Sales Order(VA02) -> Procurement tab, the Schedule Line is CB which is tied to Movement Type 601 (tcode VOV6).
    Does this mean that the Goods Issue transaction i must use is VL01? In tcode OMJJ, it shows allowed transaction for
    Movement Type 601 is VL01.
    Can anyone provide some clarification on this?
    Thanks so much.

    X = customer
    Y = my company
    Z = vendor
    Based on my understanding, third-party 'Individual PO' is slightly different than the regular third-party
    PO process. In regular third-party PO process, X orders goods from Y, Y order goods from Z, then
    Z sends the goods directly to X, Z invoice Y, then Y invoice X.  Thus, this process, i know that there's
    no need to post a Goods Issue like you said.
    However, in the 'Individual PO' process (from what i've read),
    Z would send the goods to Y instead of sending it  directly to X. Then Y sends the goods to X after
    receiving the goods from Z.  Here, i would think we would need Y to post a Goods Issue (when Y is sending goods to X).  Because when i do a Goods Receipt during the 'Individual PO' process,
    transaction MB5B shows that the plant(i'm assumping it's Y's plant) shows "Total Receipts = 5,
    Total Issues = 0 "  and my inventory g/l account also gets Debited. Thus, i wonder if Y posting a Goods Issue to customer X would then result in "Total Receipts = 5 , Total Issues = 5"  in transaction MB5B
    and hopefully my inventory g/l account gets Credit as well.
    Perhaps i'm confusing "Goods Issue" with outbound delivery VL01N?
    Is there a difference between Goods Issue and Outbound Delivery?
    Thank you.
    Your reply has been very helpful.

  • FM MM integration - Budget Duplicated during goods issue

    Hi,
    Budget is getting duplicated during goods issue
    Following is the process fallowed:
    Process steps
    T.code
    FM A/c Assignment Update
    Remarks
    Purchase requisition
    ME51N
    Commitment item/Fund/Fund Center
    Budget Consumed
    Purchase requisition Release
    ME54N
    Commitment item/Fund/Fund Center
    Purchase Order
    ME21N
    Commitment item/Fund/Fund Center
    Budget Consumed – PR Reference
    Purchase Order Release
    ME29N
    Commitment item/Fund/Fund Center
    Goods Receipt
    MIGO
    Commitment item/Fund/Fund Center
    Budget Consumed – PO reference
    Material Reservation
    MB21
    Created with reference to WBS Element
    Goods Issue
    MIGO
    Commitment item/Fund/Fund Center
    Budget Duplicated during goods issue (Note: No Purchasing document reference is updated in line item)
    Invoice Receipt
    MIRO
    Payment
    F-53/F-58
    Thanks and Regards,
    Ravindra Kutnikar

    Hi,
    This is a standard SAP behavior. You may assign any DUMMY commitment item in FM derive for Consumption G/L. Create a derivation rule based on G/L and wherever you dont want budget control, put dummy commitment item. Goods receipt and issue are two different flow. As you said, fod goods issue, there is no reference of corresponding goods receipt. Thats the reason why this happens.
    Regards,
    Sudeep.

  • Report for Goods Issued for a Project

    Dear Friends,
                           I want a report for a goods issued for a project.can any body convey the T Code Please...
    Regards,

    use mb51 and select q-special stock and enter wbs no. for which you want to see the details.
    if you have more than one wbs then also you can paste no.s of wbs in mb51
    regards

Maybe you are looking for