Average salary for 12 months start from a specific date

Hi Expert,
If we want to calculate the  average for past 12 past month, starting from a past date, any idea how to achieve this?
E.g.  I would like to have the average for past 12 months, starting from  01.Nov 2014,  i.e. the required periods are Nov 2013 to Oct 2014
Thanks

Go through below link you may get an idea.
Payroll processing - Calculate average 6 month Basic Salary
Regards
Venkatesh

Similar Messages

  • Product Revenue over several months starting from a different date

    Hi,
    I have a question regarding product revenue. You can indicate for how many months certain opportunities generate revenue, right? Is this visible in the reports and is is it also possible to indicate the date when this opportunity will start taking place? Which variable should I use?
    Any suggestions are more than welcome!
    Thanks in advance
    Kind regards
    Vincent

    Hi Vincent,
    If you are reporting at opportunity level:
    If you have an opportunity without any associated products, the 'Expected Close Date' defines when the Opportunity is due to close and when the revenue will be recognised within your sales pipeline. You'll notice at this point the field Date.Date should match the 'Expected Close Date'
    If you are reporting at product level:
    When you add a product to your opportunity the Opportunity Product.Start/Close Date field indicates when the revenue for that particular product starts. If you populate the # Periods and Frequency a new period is added each time accordingly (A new date.date). For example, you add a product with a frequency of monthly and a # periods of 3. The product is set to £100 of revenue per period. You report would be as follows:
    Product Date Revenue
    A 01/07/2009 £100
    A 01/08/2009 £100
    A 01/09/2009 £100
    To find the date the opportunity starts you need to search for the Minimum Start Date out of all of your products.. You can use something along the lines of: MIN('Start/Close Date' by 'Opportunity ID'). To find out when it ends just replace MIN with MAX. To find the duration you can check the difference between the Min and Max dates, you could do something like: TIMESTAMPDIFF(SQL_TSI_DAY, MIN('Start/Close Date' by 'Opportunity ID', MAX('Start/Close Date' by 'Opportunity ID'). This returns the duration in days.
    The syntax above isn't correct, you'll need to substitute the exact field names within the code but it should give you a good idea.
    Thanks
    Oli @ Innoveer

  • How to let " i " of a for loop to start from a "X"

    Hi,
    how to let " i " of a for loop to start from a value "x" where x is a variable?
    Thx
    Message Edited by starfish on 10-19-2007 06:00 AM

    Hi starfish,
    use it like this:
    If this doesn't fit your needs you should attach an example of what you really need!
    Message Edited by GerdW on 10-19-2007 01:15 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    I.png ‏2 KB

  • Should PSE12 installed for 9 months start asking me to sign in as trial software?

    Should PSE12 installed for 9 months start asking me to sign in as trial software?

    CS6 or Creative Cloud Reverts to Trial Mode
    http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  • Can date search help start from a particular date?

    Hi All.
    We have an application where there are 4 date fields.
    These dates can range in past as well as future.
    After selecting one date, others should start from that date.
    But by default, it always takes the system date as starting point.
    Can the date search help start from a particular date?
    Thanks in adv.

    Hi ,
    u can set the initial dates u want by setting the attributes values to which it is bind  . for eg in WDDOINIT of the view..
    hope this will help u ..
    Regards
    Yash

  • Alphabetize column starting from a specific row

    I'm creating a document where i have a header and under the header i have names and numbers. In one row I have a title for "Names" (C1) in the next column, within the same row, "Phone Numbers. " (C2). My question is; how can I arrange a column in alphabetical order starting from a specific row and not the whole table. Thanks in advance.

    PeterBreis0807 wrote:
    Select the cells in the row or column that you want to sort:
    Inspector > Table > Table > Edit Rows & Columns > Sort Ascending/Descending
    It will only do the cells you have selected and leave the rest as is.
    Peter
    Within the Table Inspector are two buttons at the top, Table and Format.
    Peter

  • Share calendar from a specific date

    I am spending three months in the US visiting family. While I am here, I'd like to share certain calendars with my family members (doctor's appointments, social engagements, etc.), but don't want them to be able to see every such appointment I've had going back several years. When I start sharing a calendar, is it possible to only show it starting from a particular date? Or for a specific date range? I know I could create an extra calendar to use just for this, but I'd rather not have to do that if possible.
    Thanks!

    Hi,
    The SearchQuery parameter specifies a search string or a query formatted. You can limit your search to specific types of files, such as "kind:email".
    Here is a related article which can help you for your reference.
    Advanced Query Syntax
    http://msdn.microsoft.com/en-us/library/aa965711(VS.85).aspx
    Here is a related thread for your reference.
    http://social.technet.microsoft.com/Forums/exchange/en-US/1f6cc2cd-b5fe-483d-aea7-d8fa20937614/error-cmdlet-searchmailbox?forum=exchangesvrgenerallegacy
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Depreciation for additions to start from the following month

    Hi Gurus,
    Have situation in depreciation posting, When acquisition happens depreciation has to start from next period on wards (Dep not to post in Acq period) this is working fine and good. (period control maintained as 11 for Acq)
    In the same way it has to apply for Additions if any happens for existing Acquisitions. Period control set as next month 11 for additions, but system making the posting in acquisition period itself including catchup of previous periods from oredinary dep starting.
    I want make the system to start depreciating dep from the following period rather than acquisition period for Additions and catcup dep also post in this from Ordinary depreciation start date .
    Example of Issue:
    Acquisitions:
    Acquisition happend in Period-01, dep started from next period "02"
    This working fine.
    Addiotions:
    Using the above example
    Addition happend in period-05, Dep started from-05 including the catch up dep of periods; 02,03,04,05.
    By right the depreciation posting has to starts in the following Perios 06, has to consider Catchup amounts also.
    Any help on the above are appreciated most.
    Points are available
    Thanks in advance,
    Vyas

    Hi Milosavljevic,
    On the above system behaviour is right, but we have to understand like below:
    What ever posted the Depreciation amount in the acquissition month it belongs to accumilation depreciation of the addition of asset ( from ordinary dep start date to untill acquissition period).These happend bcoz of catchup, the real depreciation was started from the following month onwards..
    Hope this understanding made me clear...
    If u able to find any thing better pla keep share..
    Others plz comment on this for better understanding.
    Thanks,
    Vyas

  • FM for getting MONTH name from DATE.

    Hi all ,
    We have a requirement to get Month name from the DATE,e.g IF date is 01/01/2008 we need a FM which can generate month name as 'JANUARY'.
    \[removed by moderator\]
    Thanks and Regards
    Kiran
    Edited by: Jan Stallkamp on Jul 30, 2008 4:26 PM

    Hi,
    Here is the code u required...
    REPORT  ZASHU_MONTH_NAMES_GET.
    data:r_code type sy-subrc.
    data:mnames type standard table of T247 with header line.
    CALL FUNCTION 'MONTH_NAMES_GET'
    EXPORTING
       LANGUAGE                    = SY-LANGU
    IMPORTING
         RETURN_CODE                 = r_code
    TABLES
        month_names                 = mnames.
    EXCEPTIONS
      MONTH_NAMES_NOT_FOUND       = 1
      OTHERS                      = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    write:/ mnames.
    Thanks & Regards
    Ashu Singh

  • How to start from a specific point on the timeline

    I have a horizontal list of image thumbnails, there are 21 thumbnails and only 7 are visible at one time and scrolls back and forth. It works fine.
    However, when I choose an image that is not in the first seven, say the 8th image, the page loads and the thumbnails goes back to the beginning images (undesirable). When the 8th image page is shown I would like the thumbnails to start at the eigth image, NOT from the beginning again.
    I had the animation positioned to the eight image for the start, with the first 7 off to the left and the second 7 off to the right. But when I saved and loaded it into the page, it just starts from the begining.
    How can I start the thumbnails from a specific desired position, such as the 8th image or the 15th image depending on the page?
    Thank you for any help.
    Anthony

    Hi Anthony,
    Thank you for your post.
    It would be better if you share any link or actual composition with us.
    Regards,
    Devendra

  • View ADSI properties for an AD object from a specific DC

    Hello all,
    What I'm wanting to do is to view the ADSI properties of an active directory object by querying a SPECIFIC DC. My plan is to use this information to check whether adprep has replicated to all DC's in the domain.
    For example, the following command gets me the ADSI information for an AD object from some DC for Domain1:
    [adsi]'LDAP://CN=ActiveDirectoryUpdate,CN=ForestUpdates,CN=Configuration,DC=Domain1,DC=net'
    However, I would like to get this information from a SPECIFIC DC, not just from any DC. I have also been tampering around with get-adrootdse, but am unable to determine how to drill down under a specific "naming context" object (like to return
    the "cn=activedirectoryupdate,cn=forestupdates" object under the configuration naming context object like the command above):
    Foreach($namingcontext in (Get-ADRootDSE -server DC1.Domain1.net).namingcontexts){
    get-adobject $namingcontext -Properties *
    Anyone have any ideas how I can use the [ADSI] adapter or get-adrootdse to return specific AD objects from a specific domain controller?

    Nevermind, I believe I found my answer:
    http://blogs.technet.com/b/heyscriptingguy/archive/2005/05/17/how-can-i-access-active-directory-on-a-specific-domain-controller.aspx

  • Report for - All Status Messages from a Specific System

    
    I would like a report that is based on the console query “All Status Messages from a Specific System”. I have tried to take the SQL Query from the smsprovider.log but with no luck. So there is where my SQL knowledge ends. Do any of you maybe already have this
    report or could help me create one?

    You could use v_StatMsgWithInsStrings as an alternative. 
    Torsten Meringer | http://www.mssccmfaq.de

  • How to get subordinate org units for a given org unit within specific dates

    hi,
    How to get subordinate org units for a given org unit within specific dates

    Use the following Func module ..
    HRWPC_RFC_STRUCTURE_GET
    *--Get the sub org.unts for the given selection.
        CALL FUNCTION 'HRWPC_RFC_STRUCTURE_GET'
          EXPORTING
            ROOT           = root_org   <-- Give the Org unit 
            EVPATH         = 'O-O_DOWN'
            BEGDA          = s_date-low
            ENDDA          = s_date-high
          TABLES
            T_OBJEC        = t_objec
            T_STRUC        = t_struc
          EXCEPTIONS
            NOTHING_FOUND  = 1
            INTERNAL_ERROR = 2
            OTHERS         = 3.
        IF SY-SUBRC <> 0.
          MESSAGE i000 WITH 'No Sub Orgunits for ' s_objid-low.
        else.
    *--Prepare final sub org.units tabl.
          loop at t_objec.
            if t_objec-objid ne s_objid-low.
              it_orgunit = t_objec-objid.
              it_orgunit-begda   = t_objec-begda.
              it_orgunit-endda   = t_objec-endda.
              APPEND it_orgunit.
            endif.
          endloop.
        endif.

  • I have an IPA2 wifi 3g working fine with wifi up for 3 monthes then from two weeks it get connection but after 1 minutes stop to serf/download with signal and connection always present. With the same router are still connected others 3 pc working!

    I all, 
    the scenario is the following:
    WIFI connection with TISCALI operator. Encryption made by WPA2 EAS with router SITECOM or tested also with another router DIGICOM with WPA TPK.
    From December up to end of March the IPAD2 working perfectly serfing and downloading.
    By two weeks it has a very strange behavour without have changed any configuration on IPAD or network: 
    with WIFI turned on it discover about 4 different ntw among them the mine, I successfully authenticate with psw the my ntw,
    the IPAD2 start to run with Safari without problems, but after about 1 minutes, it stop to serf or download and answer that the Server cannot be reached or the page cannot be open, at the same time the signal is present on the icon of WIFI and it is strong.
    This problem is systematic: If I dissasociate the ntw and then authenticate again I start to serf again for 1 minutes (more or less) and then it stops again, this occurs every time I authenticate the ntw after a disassociation.
    I made some test changing the encryption from WPA2, WPA and also without encryption but the result was always the same, after about one minute the server seems to be for the IPAD2 no more reachable while the others PC and netbook connected to the same router continue to serf/download without problems!
    I also tried to change the router with a DIGCOM that I did not use generally, but the behavour is always the same.
    Since the IOS was the 4.3 revisin, I made the upgrade by means Itunes to IOS 5.1 succesfully installed.
    But unfortunatelly all test repeted have had the same negative result with the same behavour!
    Yesterday I tried to do the complete restore of the System but the tests had the same rsult. 
    I really don't know how to proceed, the problem started suddenly without any action from my side....is there someone that can help me?
    Thanks Massimo

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Display three prior months starting from current month

    Hello All,
    I came across the requiremnt:
    The report looks like:
    2014-Jan
    2014-Feb
    2014-Mar
    2014-Apr
    2014-May
    2014-June
    2014-July
    2014-Aug
    2014-Sep
    2014-oct
    2014-Nov
    2014-Dec
    A
    122
    233
    233
    233
    233
    233
    233
    233
    233
    233
    233
    233
    B
    22
    33
    33
    33
    33
    33
    33
    33
    33
    33
    33
    33
    C
    33
    33
    33
    33
    33
    33
    33
    33
    33
    33
    33
    33
    D
    333
    3333
    3333
    3333
    3333
    3333
    3333
    3333
    3333
    3333
    3333
    3333
    The requirement is to display the prior 3 months ,current month, next 3 months.
    Assume that current month is SEPTEMBER, the report should look like:
    2014-June
    2014-July
    2014-Aug
    2014-Sep
    2014-oct
    2014-Nov
    2014-Dec
    A
    233
    233
    233
    233
    233
    233
    233
    B
    33
    33
    33
    33
    33
    33
    33
    C
    33
    33
    33
    33
    33
    33
    33
    D
    3333
    3333
    3333
    3333
    3333
    3333
    3333
    Share your thoughts.
    Thanks

    Hello All,
    I got this resolved using the below formula to get either prior 3 months or the next 3 months from current date:
    3rd month from current date:
    =LastDayOfMonth(RelativeDate(LastDayOfMonth(RelativeDate(LastDayOfMonth(RelativeDate(LastDayOfMonth(CurrentDate()); 1));1));1))
    Prior 3rd month from current date:
    =ToDate(FormatDate(RelativeDate(ToDate(FormatDate(RelativeDate(ToDate(FormatDate(RelativeDate(ToDate(FormatDate(CurrentDate();"MM/yyyy");"MM/yyyy");-1);"MM/yyyy");"MM/yyyy");-1);"MM/yyyy");"MM/yyyy");-1);"MM/yyyy");"MM/yyyy")
    and used these objects to restrict my date field(date object between "Prior 3rd month from current date:" and
    "Prior 3rd month from current date:"
    Thanks,
    Vijay

Maybe you are looking for