AVerMedia Sound Showing Up Problem In 2.5 But Shows In 3.1

Hello Reader,
I am currently having trouble with Adobe Flash Media Encoder 2.5 displaying AVerMedia's sound input, but when I run Adobe Flash Media Live Encoder 3.1, the AVerMedia sound input shows up.
This is off topic but may help. I also use Virtual Audio Cable to split incoming audio. Before I installed AVerMedia, Virtual Audio Cable sound input I created wouldn't show up in FME 2.5, but it would show up in FMLE 3.1. Since I've installed AVerMedia, Virtual Audio Cable sound input finally shows up in FME 2.5. I have tried just splitting AVerMedia's sound through Virtual Audio Cable, but it doesn't show up in there either.
Thank you for any help you can give me, anything help is greatly appreciated!
Jeff

Plus+ Addition To Above
I'm not looking for solutions like, "just use FMLE 3.1," I'm looking for a fix so I can use it on FME 2.5. If you can't provide a reasonable answer in my set boundary, don't post.

Similar Messages

  • Sound Blaster Audigy Problem

    Ok I am finally stumped.
    Specs
    KT800Neo
    Athlon 64 3200+
    512MB 400Mhz DDR
    2 x 120GB Segate HD
    AIW 9800 Pro
    Win XP Pro Sp 1
    Sound Blaster Audigy Platinum
    MSI 52x32x52 CD-RW
    TDK DVD Recorder
    I have tried a million ways to get this stupid soundcard to work, and to no avail.
    I downloaded the newest drivers from soundblaster.com and it says it can't even detect the audigy however it shows up in my unknown device detecter.  I tried other Audigy drivers that have been unified for 5.1 plat & audigy plat.  Same results.  I then went to my old install CD that came with the sound card and it works.  However my live drive is not being enabled for some reason.  I have tried hooking up a 5.1 Live Drive and nothing as well.
    I don't have any sound drivers for anything onboard releated installed.
    I tried the Kx Drivers for giggles and they installed and even got closer with my Inspire 6.1's working a bit better, however live drive still not working correctly.
    My 1394 Net Adapter 1 & 2 are not loaded (drivers) ! mark by the both of them, they tell me to run the trouble shooter 2 says the device drive couldn't load due to old install being in the system, however I have removed these devices before and tried to do something.
    ATM I really need to get this sound card functional so any suggestions are appreciated.
    Thanks

    First time in my life a motherboard worries me before I start playing with it.  I have been waiting for my K8T Neo to arrive for two weeks and had time to read numerous reviews and forum.
    I validated almost every piece of hardware I’m using, including the sound card (Sound Blaster Audigy Platinum) against the list of hardware tested in MSI’s test report.  My sound card was supposed to be supported but we all know the story…
    Anyway, I was pleased when I booted for the first time my PC (after disabling the onboard sound) to succeed where many of us failed.  I even managed to install Windows XP SP1 without any trouble.  I also installed all the latest versions of the drivers, except for my Audigy, for which I installed the driver that came on the accompanying CD.  I had no trouble with the stereo sound.
    Trouble came when I tested the surround sound.  I experienced the same thing as goretexpretzels: no sound from the rear channels…  I then updated with the latest version of the drivers/mixer but same crap.  
    I will perform some tests and try with a non-SP1 version of XP to see if it resolves the problem, but I sincerely hope that MSI will come out with a BIOS patch or a workaround before long.
    I’m already starting to regret for not having stayed with Abit after all those years of reliable computing…

  • My ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

    my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

    tmplHi pranoop,
    If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • MSI ex600 sound headphones&speakers problem

    Hello all I have MSI ex600 and i have problem with my sound
    When speakers playing some music and i want hear it in my headphones its problem because speakers playing away
    So i hear music on headphones and speakes too
    I try find some solution (and its many problems with this stuff) but for me didnt work
    Some information of me Sound card :
    Sound(a)   : 82801H ICH8 Family HD Audio Controller module: snd-hda-intel
    [root@SilentHill ~]# lsmod | grep snd
    snd_seq_oss            33408  0
    snd_seq_midi_event      7936  1 snd_seq_oss
    snd_seq                55936  4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device          7956  2 snd_seq_oss,snd_seq
    snd_pcm_oss            42400  0
    snd_mixer_oss          17024  1 snd_pcm_oss
    snd_hda_intel         374568  3
    snd_pcm                82312  2 snd_pcm_oss,snd_hda_intel
    snd_timer              22536  2 snd_seq,snd_pcm
    snd_page_alloc          9232  2 snd_hda_intel,snd_pcm
    snd_hwdep               9096  1 snd_hda_intel
    snd                    57320  15 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
    soundcore               8096  1 snd
    [root@SilentHill ~]# cat /etc/modprobe.conf
    # /etc/modprobe.conf (for v2.6 kernels)
    # alias wlan0 ndiswrapper
    # --- BEGIN: Generated by ALSACONF, do not edit. ---
    # --- ALSACONF version 1.0.15 ---
    alias snd-card-0 snd-hda-intel
    options snd-hda-intel index=0 model=5stack
    alias sound-slot-0 snd-hda-intel
    # --- END: Generated by ALSACONF, do not edit. ---
    That was my last stuff what i tried (options snd-... in modprobe.conf)
    Thanks and sorry for my bad english

    Add this to your modprobe.conf :
    options snd-hda-intel model=3stack-6ch
    It will add a headphones switch to your alsa control which if you disable will mute the onboard speakers.
    Works on my MSI vr600

  • Continuity sound - my last problem!

    Everything seems to be working fine except one silly last thing:
    I can place a call using my mac mini if i plug my iPhone headset in. the graphic shows that the mic is receiving sound, and I can hear it fine - but the third party I have called cannot hear me - this is obviously something very simple I have missed - any clues where to look?

    In my case it was my Toneport GX - looks like it wasn't relinquishing control of audio when asked

  • "New in iTunes" newsletter contents received in iPad email will not produce sound.  Any ideas as to why?  If I go into the iTunes program, I get sound without any problem.

    "New in iTunes" newsletter contents received in iPad email will not produce sound for music samples.  Any ideas as to why?  If I go into the iTunes program, I get sound without any problem.

    Amazing! I'm a dance instructor and am doing the exact same thing as you - and not seeing what I need on my iPad Air ... I can't believe there has been no reply on this! I also can't believe there isn't an easy way of seeing track info in the iPad or iPhone but I've spent hours searching and am not finding anything

  • Using iDVD, I've no problem creating a slideshow, but I want to add three seperate sound files, in this case speeches I've got in iTunes. I want to create three individual buttons/sub menu to access them individually from the photos. Can anyone help

    Using iDVD I've no problem creating a slideshow, but am having problems trying to add three seperate sound files in this case three speeches that I hold in iTunes. I want to be able to access them individually and seperately from the photo slideshow. Can anyone advise if this can be done and if it can, how I go about creating the seperate menu and buttons.

    If you'd like to integrate the speeches with the slideshow, I'd do that in iMovie where you'll have more control over the timing.  Use chapter markers at the beginning of each speech so the viewer can jump to a particular speech (note that chapter markers advance the viewer to a particular spot -- the viewer keeps watching the rest of the video until the end of everything or until they use the remote's menu button).
    If you're just wanting the speeches to be on the DVD so people can listen to the speeches after seeing your slideshow, you could:
    - use iDVD or iMovie to make a "slideshow" with just 1 image matching the length of a speech.
    - create three submenus and use the speeches as menu music.  Here's a (random) video on creating submenus:
    http://www.youtube.com/watch?v=DlhQSb_D5kc
    John

  • So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't

    So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't work. I don't know what to do!!

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • TS3716 My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    Hey, Thanks a lot.  It took quite a bit of time to resurrect this ipod.  I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new.  This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted.  Finally, it recognized my ipod and started to download each song.  It took awhile as there was 602 songs, but finally it works.  Yea!!!  I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information.  This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone.  Take care, Karen

  • Just buy my macbook last week, and the problem is i cannot start my macbook and is making are beep beep sound. And is become warm. But when I connect to a charger is can start like normally.  What I'm need to do so? Thank You.

    just buy my macbook last week, and the problem is i cannot start my macbook and is making are beep beep sound. And is become warm. But when I connect to a charger is can start like normally.  What I'm need to do so? Thank You.

    Since you are covered by warranty, I would take it to your nearest Apple store immediately. There might be a problem with the RAM. And, you have 14 days to return the machine, so if it is not an easy fix, you might want to consider returning it for another machine.

  • I recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

    i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue continues, take the device to Apple for evaluation and possible replacement.

  • Skype Robotic Sounds & Voice Delay Problems

    Hi
    I've recently downloaded the latest version of Skype. Although others can hear me very clearly (and have no problems with other Skype users) the sound on my side comes through as garbled and robotic noises.
    Any idea what steps I can take to try and troubleshoot this? My internet connection is fine and I have no other programmes running in the background.
    Thanks
    Nick

    Hi all,
    I am having a similar problem with my Mac Air computer... Sometimes, when I run the skype and try to talk with someone, the person that is trying to hear me cannot... My voice appear as a robotic and Its impossible to have a conversation... The other person cannot hear anything that I am trying to say... At the first time I thought is a memory problem... But without a background program and anything, the problem continues...
    Could someone help me on it?
    Thaks a lot.

  • I had to reboot my iMac, it froze... When I went to reboot it started up as usual... Made power sound, showed apple logo (white screen)... And pin wheel started after 3 to 4 mins., went tblack screen with error messages. Rebooted 5x, won't go paspinwheel

    I had to reboot my iMac, it froze... When I went to reboot it started up as usual... Made power sound, showed apple logo (white screen)... And pin wheel started after 3 to 4 mins., went to black screen with error messages. Rebooted 5x, shot off power source, disconnected external devices... Now won't go past pinwheel... Since it does not go to black screen, I cannot convey error messages... Please advise what I could try... Thank you... I have an iMac 2009... Upgrade operating system to new system this spring... Don.

    It is guitardad's again... I read past topics on this issue... As I am not overly computer savvy, I want to be careful that I don't mess things up further... Of course the extended warranty is done... There is talk about booting from the system disc...  I'm not sure if this is the first thing to do or not... Can the support community, advise me on what logical steps I should take ( in order) or direct me to a website and/ or you tube video that walks one safely through the processes... Once again thank you for reading and offering your advice... I am on fixed $$$ so I'm trying to avoid calling apple, unless I have no options and/or the suggestions do not resolve the issues... Tx again Don.

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • HT2693 The sound will no longer come through my headphones on my iPad I've tried several different headsets.  The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. Please

    The sound will no longer come through my headphones on my iPad I've tried several different headsets.  The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. This is the new ipad with retina display and is only 2 months old and otherwise works fine. Please help!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPad. Nothing will be lost
    Reset iPad: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPad for a refurbished one for this price. They do not fix yours.
    iPad Service Answer Center                 
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPad Repair - iFixit

Maybe you are looking for