AVFoundationCF.dll error message at launch after updating to iTunes 10.1

Hey,
I did About>Check for updates and installed the 10.1 update and now whenever I try to open iTunes I get the following error:
The procedure entry point AVCFAssetTrackIsExcludedFromAutoselectionInTrackGroup could not be located in the dynamic link library AVFoundationCF.dll
I have tried downloading the full itunes 10.1 64bit installer from the web and installed that but it still shows the same error.
How can I fix this?
Message title was edited by Host

Had the same problem and this worked for me.
This is for Windows XP and may work for others but I don't know for sure.
I checked my Apple Application Support version under the Add Remove programs and it was 1.3.2
I uninstalled it.
I used WinRar to unpack the iTunesSetup.exe then I installed the AppleApplicationSupport.msi file.
Everything work after that.
Hope this helps.
PS This happened on the last upgrade to iTunes as well so...

Similar Messages

  • Missing MSVCR71.dll Error Message During Launch

    I just wanted to pass along an error message that I have found the solution to and have passed onto Adobe through the bug submission process.
    I have discovered a QuickTime Component that causes Adobe Encore CS5 to give an error message during launch.  The Error message states “The file MSVCR71.dll could not be found. Please reinstall Adobe Encore to resolve the problem” (Well, it is something really close to that.  I did not write down the error message before fixing the problem).  There is an “OK” button below the message to continue loading Adobe Encore.
    The error message is only displayed if all other CS5 programs are closed.  During my findings, I discovered that if you open Adobe Encore CS5 through Premiere Pro CS5 or After Effects CS5 by using Dynamic Link, the error message will not be displayed.
    The QuickTime Component that causes the error message is “XiphQT”, which is used to play Xiph formats in any QuickTime based application.  The Component can be located here: http://www.xiph.org/quicktime/
    When installing the latest version of the program “Juicer” from digital juice, the QuickTime Component is installed.  Juicer will run without the Component, but gives a message that it is missing.  I have removed the Component since I use Encore to a much greater extent.
    To remove the XiphQT Component from QuickTime, you must remove it manually because when QuickTime is uninstalled, the Component is left behind and will be a part of future installations of QuickTime.
    While the error message displayed during the launch of Adobe Encore CS5 is not detrimental, it can be frustrating, so I hope this may help others that receive the error message from above.  I should also note that I am using Windows 7 Home Premium.

    Greetings,
    My solution was attributable to my firewall (Microsoft Defender) blocking TCP connections to QuckTime.  Here's the steps that resolved my problems on CS5, Windows 7, 64 bit:
    Control Panel
    Windows Firewall
    Advanced Settings
    Outbound Rules
    New Rule...
    Program/Next
    This program path:  (use Windows Explorer to search)
    c:\Program Files (x86)\Adobe\Adobe Bridge CS5\msvcr71.dll
    Allow the connection
    (Leave checks Domain, Private, Public)/Next
    Name Description: (whatever you like - will display at top of Windows Firewall Advanced Security Outbound Rules)
    Good luck,  Michael

  • [Solved] 'New' error messages during init after updating initscripts

    After updating to the latest initscripts, I got some error messages during init that I hadn't seen before.  They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled.  The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
    In any case, I downgraded and found that the errors were nothing new.  I'm just curious if the appearance of the errors during init was by design or a happy accident.
    Last edited by alphaniner (2011-08-01 17:07:30)

    alphaniner wrote:
    karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
    http://projects.archlinux.org/initscrip … 328fbaf2e7
    http://projects.archlinux.org/initscrip … 42dfeca8c2
    I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
    You need to reboot.
    After you do, run
    tail /var/log/boot
    Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
    [karol@black ~]$ tail /var/log/boot
    Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
    Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

  • Error messages... after updating iTunes

    When I plug my ipod into iTunes an error message appears that says my ipod maybe corrupt, you may need to restore this Ipod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod. This happened after I just updated to the newest version of iTunes... what do I do to fix it without restoring it?

    "If the only copy is on your ipod, you're hosed."
    True-dat! I own three USB mp3 players. I have stayed away from "syncing" players for just this reason. My daughter has a Redi player that is supposed to be able to sync with WMP and iTunes, but iTunes doesn't recognize it as a sync-able device (on her Mac or PC) and the Mac won't even recognize that it's plugged in.
    Bottom line: You need to 'restore' the iPod in order to use it (sync with it). That means anything you don't have backed up will be lost.

  • Odd error message that started after update to Mountain Lion

    Ever since updating to Mountain Lion, I get this error message every now and then:
    Nothing in particular seems to cause it, and there isn't a server to which I'm trying to connect. My computer is a mid 2010 MacBook Pro
    Can someone tell me what this means in the first place and how I can fix the problem?
    Thanks!

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

  • I get an error message when trying to update to Itunes 8.2 on my mac osx

    I downloaded the update and it failed during install, saying there were 'errors' with the install.
    Can anyone please help?

    I'm having a similar problem. Using software update, iTunes 8.2 begins to download. It gets to about 41 megabytes and then times out. I get various error messages including that I'm not connected to the internet, and the directory didn't have the right permissions, etc.
    I don't really use iTunes that much, but I use my iPhone ALL the time and would like to upgrade my iPhone software. Unfortunately, I have to have iTunes 8.2 to do that.
    Is anyone from Apple listening?? There seem to be multiple posts about this problem. This is a very un-Mac-like problem.
    Thanks

  • HT201210 Can someone help me with an error message I get when updating to itunes version 6?

    I get the error message 'itunes could not back up the iphone because the back up was corrupt or not compatible with the iphone' when trying to update my iphone 4 to itunes v6.0.
    What do I do?
    HELP!
    Thank you

    Read http://www.justanswer.com/cell-phones/6izkg-restore-corrupted-iphone-backup-file .html

  • Error message when try to update to itunes 7.02

    Hi,
    I'm trying to update my itunes on my iMac G5 but whenever I try to install the update it comes up with
    ' itunesX cannot be installed on this computer. Please quit iTunes before performing this update'
    I know that OS 10.3.9 is required and that is the system that I'm running on so I'm stumped.
    I'm extremely frustrated as I've previously managed OK when updating for the families other ipods, now I've bought my husband the 2G shuffle I can't even get the update to get it to work!

    Make sure all apps are closed completely then click on the blue Apple (Upper Left hand Corner) Go to Software updates..
    That will update itunes for you.

  • Error message when launching updated iTunes

    After updating to iTunes 11, I've been unable to launch iTunes on my computer. (I'm using Windows 7 Home)
    When I try to open iTunes, I'm shown an error message that looks like this:
    Any idea what could be wrong? I've tried uninstalling iTunes and all its components, re-starting the computer, and re-installing but I still have the same error. Also, I've reparing to no avail.

    Try again. Use Control Panel > Add/Remove or Programs & Features to uninstall:
    Apple Application Support
    Apple Mobile Device Support
    Apple Software Update
    Bonjour
    iTunes
    QuickTime
    Reboot, delete the iTunes folders in C:\Program Files and/or C:\Program Files (x86) if they still exist, then reinstall iTunes using an account with administrator rights. Hopefully this time it will work correctly.
    tt2

  • Here are the instructions on how to fix the newest update problem with the .dll error message:, Here are the instructions on how to fix the newest update problem with the .dll error message:

    Go to My Computer, Uninstall Programs, and uninstall in this exact order :
          Itunes
          Apples Software Update
         Apple Mobile Device Support
         Bonjour (my system required a reboot on this one)
         Apple Application Support
    Reboot your computer, go to the official Itunes website (make sure it's the Apple Itunes Website and not some other one!), and reinstall Itunes. 
    I got the same .dll error message after the reinstall, but my Itunes was downloaded successfully and I was able to Sync my phone. : )
    Good luck to you and God Bless! 
    (Sad that we have to come to the Discussion Forum to figure this all out instead of Apple taking care of their business and helping us out, huh?)

    Someone else said they did a system restore to a previous update, and then a java update and that worked for them, saying they were going to stick with the earlier version of itunes until they get the bugs out of the new one.  I t tried restores and that didn't work for me either, but maybe it will work for you.  Good luck and I hope you get it working soon.. 

  • Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

    macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. 

    I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
    This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
    After making your backup try the following:
    Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
    Launch the App Store, click the "Store" menu, and sign in with your AppleID.
    Open the main page of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

  • After updating my itunes per the update notice I received a run-time error R6034 message. Now I am unable to use iTunes. What can I do to repair this error?

    After updating my iTunes per the update notice I received a run-time error R6034. Now I am unable to access iTunes at all.
    Can someone tell me how to correct this problem?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS5376 I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions above and now I can't get past the Service 'Apple Mobile Divice failed to start. Help!!!

    I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
    V/r "TRACER"
    CDR Harold W. "TRACER" Valentine, SC, USN

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • TS1369 since downloading updates for itunes I get MSVCR80.dll error message every time I try to access itunes?

    Since downloading updates for itunes I get MSVCR80.dll error message every time I try to start i-tunes. can anybody help please.

    Hello aristilus2,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing and reinstalling iTunes for the issue you described.  The following article has steps to do this, and I recommend removing iTunes and all related componenets as outlined in the article:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    Are you trying to update via wifi or connected to your computer?
     Cheers, Tom

Maybe you are looking for