AVG Not Recognized on Network Magic --Red Alert

How do I correct the red alert on Network Magic which says I have no antivirus installed when I just put on the new version of AVG? Now I have got Avast on the desktop and installed a new version with no red alert about it. Is AVG not a good antivirus? (Yes, I decided to try it on the laptop while keeping Avast on the desktop. Just wanted to see if there was any difference.) Will I need to uninstall AVG and put Avast on the laptop to keep this alert from being there? Thanks for any help! Susan

Network Magic is still being sold but Cisco is providing no support for it. I am still finding new uses for it in mapping and checking out my fairly complex home network. If it was updated and given some bug fixes it would be nice, and make me feel a lot better about Cisco. But because they've abandoned it and also the WRT610N router, I have finally stopped buying new Cisco products. While my 610N has buggy (IMHO) firmware, and always runs very hot due to poor ventilation, and has poor range since it no longer has external antennas like earlier models. I'd love the performance of the latest models but I won't take the chance.
(Mod note: Edited for forums compliance.)

Similar Messages

Trend Micro Anti-Spyware not detected by Network Magic

Network Magic reports that anti-spyware is not installed. Trend Micro Titanium is installed and running but not detected by Network Magic. Any help is appreciated.
    Network Magic Version installed: 5.5.9195.0
    The type of connection to the Internet is DSL
    The Brand of Modem is Motorola
    The Brand of Router is Linysys, Model is WRT310N V2 and hard-wired
    The Connection in use on the problem computer: Ethernet Port through M-Board
    Operating system is Windows Xp Home, Service Pack Level 3
    Software Firewall in use: Windows Firewall
     Trend Micro Titanium Anti-Virus Program / Spyware Program is actively protecting computer

Henry4324 wrote:
I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop.  The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Hi Henry4324,
I never heard of Vista 7 Home Premium.
Please publish a link to this operating system. Thanks. You may have a bootleg copy. In which Network Magic isn't going to work correctly.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

3rd party antivirus and antispyware not detected by Network Magic

I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop. The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Solved!
Go to Solution.

Henry4324 wrote:
I have Norton Internet Security and PC Tool Spyware doctor installed on my laptop. The operating system is Vista 7 home premium. 2 Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts refer to the programs that come with the operating system. It does not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.
Hi Henry4324,
I never heard of Vista 7 Home Premium.
Please publish a link to this operating system. Thanks. You may have a bootleg copy. In which Network Magic isn't going to work correctly.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Old computer not working with Network Magic

Hi I am having issues activating my license for Newtwork Magic on one of my home computers the desktop. I am using Network Magic Pro Ver. 5.1.9005.0-Pure 0 There are a total of 3 computers on the network. 2 are Dell Laptops with Home Vista. The third computer is a Dell desktop Precision 330. The desktop is running Windows XP Pro, Ver 2002 SP3, Pentium 4 1800MHZ. I have cable internet, Surfboard modem, a D-link router DIR-655. The desktop has a D-Link DWA-552 XtremeN adapter.
I have installed and un-install Network Magic 4 times but I still recieve the same message and yes i ran a clean disk, manually deleted files and restarted the computer everytime. The message I am receiving is: "The Licensing server could not be contacted. Please make sure you have internet connection and try again."
I am at this time using the desktop to send this message so yes I am connected to the internet but Network Magic is not acknowledging the connection. On my computer, a laptop, Network Magic indicates the desktop is on the network but a alert states that Network Magic is not installed.
Thank you

Basics from the User Guide are restart, reset, restore from backup, restore as new device. Have you gone through ALL these steps? What exactly HAVE you done to troubleshoot your issue?

Why isn't my macbook pro 10.6.7 not recognizing my network automatically?

My macbook pro 10.6.7 is not recognizing my home network automatically and instead sings me on to another network when I open my mac. How can I correct this? it wasn't doing this before.
thank you.

Matrix
In system prefs you can go to network, you will see airport listed, go to the advanced setting and make sure remember networks you have joined is checked. You can also remove networks you do not want your Mac to join. You can also check to automatically find networks. As well, you can reconfigure your network by choosing the assist me option.
Joseph

HT3728 TIme capsule not recognized on network

Hi
I set up my Time Capsule and did the first back-up with Time Machine and then decided to see if I could make Time Capsule go wireless -- it worked -- so I unplugged Time Capsule and moved it to a different location, off the desk and now Time Capsule is not recognized by the network. Has anyone else had this problem?

How is the TC connected to the network now and how was it connected before you moved it??
Do you still use internet via the TC? Is it working for internet connection but not backups?
What mode is the TC in.. ? Router, bridged or extend wireless.. join wireless?

Not recognizing wireless network

I have a new macbook pro (2 months old). Initially, it had no problems recognizing my wireless network. However, today it is no longer able to recognize any wireless networks. Wireless is still working with my iPhone/iPad. I tried rebooting and no luck. Any thoughts?

Hey jedediah,
EDIT: I read your post again and it looks like your roommate may have turned on Internet Sharing. This means that your computer is like a hub for sharing your internet connection with wired clients.
Check in System Preferences>>Sharing>>Internet Tab, and it should say Internet sharing is off. If Internet Sharing is on, try switching it off, and see if you get some sort of connection.
I'm not sure this will work, but the arrow over your airport icon makes me think it's Internet Sharing.

Windows XP not recognizing wireless networks

I recently upgrade routers from an old motorola router (about 5 years old), to a new airport extreme. I have a desktop that is running windows 7 and is hardwired into the airport extreme. and i have two ipod's that connect to the airport extreme. However it is my laptop (an old sony viao vgn-fs550) that is running windows xp (sp3) that cannot connect to the airport extreme. I tried the "fix it" solution center from microsoft but it wont download correctly, i get an error, so i tried to fix manually and it still doesn't work, when i go to "view wireless networks" there is nothing there. i got frustrated to the point that i reinstalled windows and for a brief minute i was able to view all the wireless networks in my area, including the airport extreme and the "guest network". but i could not connect to either of them. and then the "view wireless networks" would just vanish.
Is it just that windows XP *****? because if upgrading the laptop to windows 7 will fix this problem I will. But I would still like to know why XP won't allow wireless networks. From what I see online this is quite a problem with windows XP.

As a side note regarding my not being able to view wireless networks using windows xp on my laptop. I am investing in an airport express so i can access the internet on my ipad 2 while traveling. My "new" question is if i can use the airport express to "fix" my problem of my laptop running xp (sp3) not being able to view wireless networks? Would the airport express act like a "new" wireless card for my laptop and therefore will be able to connect to my airport extreme without any problems and without having to upgrade the laptop to windows 7?

C6150 All In One is not recognized over network

My printer works fine for printing over the network. My problem is that I cannot initiate a scan to computer, or initiate from within HP solution center. I can access and interact with my printer directly via the web browser interface. The HP driver install and HP home network diagnostic utility all find the printer OK on the network, but the diagnostic utility keeps saying that software is missing that is necessary to run the printer over the network. I have uninstalled all HP software, then downloaded the full version of the latest HP software suite and installed it - all OK except now when I try to run Solution center it no longer even gets to the main menu - an error message comes up and says no HP devices were found and quits. When obtaining software from the HP site I was careful to specify XP as the OS and have not tried anything that does not have XP listed as compatible.
I still can connect to it directly and print. I have looked at every possible driver that HP has on the site. I have run the scan diagnostic - It verifies the connection OK but when it gets to the driver section of the test it crashes and a Windows error message comes up and says it has encountered a problem and has to close.
I am running XP Home with all of the updates installed.

Hi,
seeing as you can acces the printer via the browser, so directly from its ip adress the connection is ok. What in these cases is most likely is that there is something on your computer blocking HP software ability to check out the network. Most likely something like a firewall or virusscanner.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Iphone not recognizing 5Ghz network

my iphone 4s does not See my Airport Extreme 5Ghz network.Any suggestions or reccomendations would be greatl appreciated.

iphone does not support dual band. it only woks on the 2.4Ghz band. make sure that your router is set to broadcast the 2.4ghz channel as well.

Photosmart C6380 not recognized on network by Windows 7

Photosmart C6380 worked great on Windows XP computer. It could be accessed through the network from several XP and VISTA computers. Installed a Windows 7 64 bit computer. It could not print to the networked printer on an XP computer. Installed the printer on the Windows 7 64bit computer and could print to it from the Windows 7 computer it was attached to. Could not print to it from the XP computers. Have downloaded latest HP drivers for Windows 7. I have seen a number of people complaining about the same problem in Microsoft forums. They have not been able to solve the problem. I downloaded an HP network test program to the XP computer and it does not see the HP printer on the Windows 7 computer. XP OS does see the printer and adds it but it doesn't print.

There is a detailed solution to this problem found on How to Geek at the following link:
http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/
This covers both file sharing and print sharing.
Although I am an HP employee, I am speaking for myself and not for HP.

Wi-Fi not recognizing any networks

So I have a wireless network set up at my house. However, my ipod will not seem to recognize my network no matter what I do. Under the Wi-Fi settings, its always saying "Choose a Network..." and never seems to find anything. I was out and about with it, and it seems my ipod doesn't recognize/find any networks out there! Anyone know a solution to this issue?

blueburst4 wrote:
Ok so i do have the wifi address. And ive tried resetting everything and it is still not working. I'm stuck!
If the tips in the articles linked above did not resolve the issue, you can try restoring the iPod and setting it up as a new iPod.
If the issue persists after restoring the iPod, make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
http://www.apple.com/retail/geniusbar/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
-Jason

Safari and Mail not recognizing IP/network after picking up new WiFi?

Very strange behavior that has happened numerous times - and I can't figure out what is going on. The situation is that when I travel to school and connect to the wifi network there, I'm having issues with Mail (5.1) and Safari (5.1.2). Network CP shows me an IP address and appears all is well - however Safari does nothing (no msg that I'm "not connected to the internet") and Mail just displays the triangle with exclamation point inside ...next to each mailbox. Interestingly, I can open up Firefox and go on my way. So why is Firefox able to 'see' the internet (Dropbox and other apps are fine too) yet Mail/Safari is having issues?
Here's what I've done:
Quitting/re-opening Safari: Safari icon bounces in dock for a minute, literally, and never opens. Now I go to try to open it again and it doesn't even try to open - no bounce, nothing (it's actually in "not responding" mode according to the force quit box). So I force quit, re-open and it goes right back to that same behavior - not responding. Have to restart to get it to act normally again.
Mail won't even quit. I have to force quit - every time that this happens.
Anyways, I can't tell if this is MB Air specific behavior, given its wifi troubles (which I have continuously whether at home or school) - or if this is purely an OS/software issue.....or a combination?
Anything else I can do to help troubleshoot, let me know. Thanks in advance.

Very strange behavior that has happened numerous times - and I can't figure out what is going on. The situation is that when I travel to school and connect to the wifi network there, I'm having issues with Mail (5.1) and Safari (5.1.2). Network CP shows me an IP address and appears all is well - however Safari does nothing (no msg that I'm "not connected to the internet") and Mail just displays the triangle with exclamation point inside ...next to each mailbox. Interestingly, I can open up Firefox and go on my way. So why is Firefox able to 'see' the internet (Dropbox and other apps are fine too) yet Mail/Safari is having issues?
Here's what I've done:
Quitting/re-opening Safari: Safari icon bounces in dock for a minute, literally, and never opens. Now I go to try to open it again and it doesn't even try to open - no bounce, nothing (it's actually in "not responding" mode according to the force quit box). So I force quit, re-open and it goes right back to that same behavior - not responding. Have to restart to get it to act normally again.
Mail won't even quit. I have to force quit - every time that this happens.
Anyways, I can't tell if this is MB Air specific behavior, given its wifi troubles (which I have continuously whether at home or school) - or if this is purely an OS/software issue.....or a combination?
Anything else I can do to help troubleshoot, let me know. Thanks in advance.

Fast backup on FireWire not recognized when network connected

I have a MacBook Pro that I've Time Machine backed up on a FireWire drive. I've now connected that FireWire drive to my Mac-Mini that I use as a home server so I can do network backups.
I've shared the drive on my home network, Time Machine on the MacBook Pro recognizes the drive but the backup I made when connected directly is no longer recognized.
How do I get TM to make use of the existing backup? The alternative will be delete everything and start a new TM backup over the network which could take days.

Neither one recognizes it....The playbook is the only thing that acknowledges that it is plugged in. I have re-installed the blackberry software on the mac and still nothing!? I thought it was weird that the iMac didn't even recognize it being plugged in. I am going downlaod the DM for my mac laptop and see if I can get it to recognize it.

Networking with a PC, Not recognizing the network.

Have a network set up at home with a few PCs and a mac. Sometimes my network will show up in the network window, but then some other times it won't. Is there a way to fix this?
Thanks for the help!

Make sure your Mac is using the same workgroup as the PCs. Run the "Directory Access" program in /Applications/Utilities. The offical help document is: http://docs.info.apple.com/article.html?artnum=107137
You might have to upgrade to Tiger. It has better support of Windows networks.

AVG Not Recognized on Network Magic --Red Alert

Similar Messages

Maybe you are looking for