AVI file does not show video

My camcorder uses AVI format. When Quicktime launches, the video is not seen, but only the sound is heard. This also happens with RealPLayer. Can anyone help?

Download this component, it's free:
http://www.perian.org/
Now you should be a happy camper....

Similar Messages

When filtering by keyword and using "Edit In" with Photoshop, edited file does not show up in list

When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett N

There are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR.

Par file does not show up in iView

Hi,
I created a small project and exported as PAR file via system admin -> support -> admin console -> portal runtime -> upload .
The file is loaded into the server but when I go to create a iView based on this PAR file my PAR file does not show up as an available option. Am i doing something wrong or missing a step?
thanks
Salim

https://www.sdn.sap.com/irj/sdn/collaboration
Please find the new link.
Thanks
Subramanya

An swf file does not show up in the website even though you can see it in preview and publish

I created a swf file from a mov file in Adobe Encoder. Thge movie shows up in Muse in both the preview and publish mode.
Does not show up in the webstie. The html file is in the assets foder and the swf file is in the image folder and the space is blank.
When i encoded the .mov file I saved it as FLV. Web 1920 x 1080, 16 x 9 5.4 Mbps is the setting for Flash Web Video when i encoded the file.

To see all the History and Cookie settings, select:
* Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
* Tools > Options > Privacy > History: [X] "Remember download history"

Song plays in iTunes, but file does not show in Finder

Bizarre issue. My 26,000+ song iTunes Library lives on an external LaCie drive. All the songs play fine in iTunes (and I can hear the drive spin up when I go to play them). However, for a few thousand of the songs, the song's file is not in the physical location where iTunes shows it to be.
An example is below... these are two song file locations from the 'Master Tune Library.xml' exported from iTunes. Both of these files
show in iTunes, and they both play just fine from iTunes (no exclamation mark next to the song names). Yet only the first file (one ending in 1219.mp3)
is at that location. The one ending in 1249.mp3 does not show in that location, either via Finder, or via Terminal.
From Terminal I get no results from "find /Volumes/LaCie500 -name espace_20101103_1249.mp3" (without the dbl quotes) But if I run the same command for the 1219 file, it does find it in the expected location. Really stumped as from where iTunes is playing ...1249.mp3.
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1219.mp3
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1249.mp3
Mac Mini
Mac OS X 10.5.8
iTunes 10.5
iTunes Media folder location is /Volumes/LaCie500/myTunes Both options underneath for "organize" and "copy files ... when adding to Library" are checked.
Thanks!

Try using EasyFind utility to reveal the files.
Are you absolutely positive those files exist? You have verified with iTune's summary view thatthe files is what you think it is?
Show In Finder will usually not only open the directory but also leave the actual file highlighted.

The capture window in Premiere Pro does not show video feed from Beta SP

Dear Sirs
The capture window in Premiere PRO CC with blackmagic 4k extreme (Desktop Video 10.1 for Windows) does not show a live video feed in, from analog beta sp, It works only in media express.
Can you help us?
Thanks
Alessandro

Starting from a fresh new win7 installation, all problems solved
Bye
Alessandro

Concatenated PDF file does not show all content.

When I concatenate 2 single page pdf file into one pdf file, the concatenated page does not show all the content. It misses the last line on the 2nd page.
However the thumbnails view shows the missing line correctly.
Also, if I view the concatenated pdf into another pdf view, it shows the content correctly.

Upon further research in the merged pdf file, it appears the merged pdf file has 2 references to the same field "UFE_ISSUE_DATE".
If I edit the pdf file in the text editor and change one of the field name to "UFE_ISSUE_DATE_TEST", then the pdf gets rendered correctly with date value shown correctly!
So, we decided to use 2 different field names in each of the individual pdf for this field only.
But, what causes confusion is that we do have several other fields with same field name in each of the individual pdf file, but upon merge they appear correctly. Searching for such field name in the merged pdf file via text editor, I can see only 1 reference. Not sure, why this particular field "UFE_ISSUE_DATE" has 2 references in the merged pdf file.
Any one has any thoughts?

Deployed par file does not show as an iview create option

Hello Experts,
I modified the com.sap.portal.runtime.masthead par app and deployed it to the portal as myCustomMasthead.
I see the par file in under the Support Workset in the portal, but when I'm in content admin and try to create an iview from the deployed par file template, the option for the deployed par does not show? Do I need to request basis to bounce the J2ee engine? What might be wrong?
Any advice will be appreciated.
Regards,
MM

Hi Nishant,
Yes the file exists under ROOT/WEB-INF/portal/portalapps.
And I am not using iview from template option, I am using iview from par file option.
I did not deploy the par file from NWDS, I created the par file in NWDS and then manually deployed the par file using the par uploader tool in the portal.
Do I need to do anything in the portalapp.xml file? This is what my portalapp.xml file looks like:
<application>
<application-config>
    <property name="ClassLoadingPolicy" value="5.0"/>
    <property name="DeploymentPolicy" value="5.0"/>
    <property name="AuthenticationPolicy" value="5.0"/>
</application-config>
<components/>
<services/>
</application>
Then there is also another portalapp.xml in the dist folder that has all this SAP stuff inside it. The top line says not to modify the file.
I bounced the J2EE Engine but it didnt fix the issue.
MM

XML configuration file does not show entry for PI_BASIS for PREPARE

Hello SAP Gurus,
We are doing ECC 6.0 SR3 upgrade including EHP3 SP3
We generated XML configuration file for EHP3 from MOPZ
But during XML file does not contains any information for PI_BASIS target level or source level
current level is 2006_1_620
We tried that XML file in PREPARE during EHP_INCURSION phase
but failed all time.
Let me know what we have to generate XML file with proper information including PI_BASIS
Even PI_BASIS not appearing in MOPZ list for selection, its surprising for us.
Any idea/direction would be highly appreciated.
Thanks,
Amit Lal

Hi,
I forwarded my query to AGS Dev support, They verified Solution manager and found no problem since it was up to date SPS15 ST400
Problem was in SAPup, they provide the lastest sapup tool that was again released for this specific problem. See notes for SAPup with keyword EHP
thanks,
Amit

Avi file does not have the same resolution as image file?

I'm using LabView with an IEEE-1394 camera and I set up the camera to record at a resolution of 1280 x 960 and can snap images and save them at that resolution from Measurement and Automation Explorer, but when I record avis using LabView, they have a resolution of 720 x 480 even though the images being written to the avi are 1280 x 960. I have had this same problem trying to make new videos from the original in which I extract a part of the image and write it to a new avi file... even though the extracted image is something like 620 x 300, when I play the avi (or get avi info), it says the avi has resolution of 720 x 480. I've tried creating an IMAQ, then using the set image size sub-VI to set the image to the size I want and the image shows up with the right resolution but the resulting avi has the wrong resolution, so my sub-videos are distorted. Is there some way to set the resolution of the avi other than by writing an image of that resolution? I'm using the compression filter DV Video Encoder... would that make any difference?
Thanks!
Kelly

Hey Kelly,
As far as the different codecs that are available, it all depends on what type of filter you want to use. They vary so widely that it is hard to say that one is better than another. Also, it depends on what type of compression that you want to use will also determine which codec you will want. Some use lossy compression and some use lossless compression. With lossy, you will lose some data when it compresses, but lossless will not. Lossless on the other hand will produce large data files, as it can only compress a certain amount without losing data.
One thing that you might want to consider is using some of the Vision functions to track changes in pixel values from one image to the next. There are a lot of different processing that you can do on your images before you store them to file by using the NI Vision functions. Other than that, you might have to just play around with the different codecs to find which one will work best for you.
Let me know if you have any further questions or concerns. Thanks, and have a great day.
Regards,
DJ L.

Nokia Multimedia Player does not show video in 3gp...

PC Suite 6.85.14.1 - latest Windows Vista When trying to play 3gp files recorded by Nokia N70, Nokia Multimedia Player only shows green video screen with moving vertical stripes, but not actual video image. Sound is played normally. I tried alternative player (VideoLAN VLC) and latter displays video without problems (unfortunately this player does not support 3gp sound so I would appreciate either correction of this problem or indication of good player supporting 3gp).

14-Dec-2007 10:25 AM
sidream wrote:
PC Suite 6.85.14.1 - latest Windows Vista When trying to play 3gp files recorded by Nokia N70, Nokia Multimedia Player only shows green video screen with moving vertical stripes, but not actual video image. Sound is played normally. I tried alternative player (VideoLAN VLC) and latter displays video without problems (unfortunately this player does not support 3gp sound so I would appreciate either correction of this problem or indication of good player supporting 3gp).

Filtering - DENY (bong-file) does not show/work

I have a very simple filter setup with only 2 entries, so 99.99% of the Internet gets blocked.
The custom Deny HTML page I have setup does not display on the clients computer when going to a page not in the allow list.
What am I doing wrong?
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
# Use only forward slashes in pathnames--backslashes can cause
# problems. See the documentation for more information.
Init fn="flex-init" access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->vars.p2c-cl% %Req->vars.remote-status% %Req->vars.r2p-cl% %Req->headers.content-length% %Req->vars.p2r-cl% %Req->vars.c2p-hl% %Req->vars.p2c-hl% %Req->vars.p2r-hl% %Req->vars.r2p-hl% %Req->vars.xfer-time%"
Init fn="init-proxy" timeout="300" timeout-2="15"
Init Test="C:/Sun/ProxyServer40/proxy-server1/config/Test.url" fn="init-url-filter" Test2="C:/Sun/ProxyServer40/proxy-server1/config/Test2.url"
<Object name="default">
AuthTrans fn="match-browser" browser=".*MSIE.*" ssl-unclean-shutdown="true"
PathCheck fn="url-check"
PathCheck fn="url-filter" allow="Test" bong-file="C:\\DENY.html"
ObjectType fn="block-ip"
Service fn="deny-service"
AddLog fn="flex-log" name="access"
</Object>
<Object name="file">
PathCheck fn="nt-uri-clean"
PathCheck fn="find-index" index-names="index.html"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service fn="send-file"
</Object>
<Object ppath="ftp://.*">
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve"
</Object>
<Object ppath="http://.*">
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve" method="*"
</Object>
<Object ppath="https://.*">
Service fn="proxy-retrieve"
</Object>
<Object ppath="gopher://.*">
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve"
</Object>
<Object ppath="connect://.*:443">
Service fn="connect" method="CONNECT"
</Object>
<Object ppath="connect://.*:563">
Service fn="connect" method="CONNECT"
</Object>The one odd thing. If the page i am viewing is using frames in the HTML code and there is a link to a page not in the allow list, the main frame that the link would display in does correctly show the deny html page. However, as said before, a simple request to say http:.//www.sun.com for example shows the browser's built in forbidden page.
Thanks

What ever default page the browser has for forbidden pages.
Like these:
[http://www.msexchange.org/img/upl/image0641086263614188.jpg|http://www.msexchange.org/img/upl/image0641086263614188.jpg]
[http://www.wictorwilen.se/WindowsLiveWriter/HTTP403ForbiddeninaSharePointsitewhenadd_D274/image.png|http://www.wictorwilen.se/WindowsLiveWriter/HTTP403ForbiddeninaSharePointsitewhenadd_D274/image.png]
[http://blog.stealthpuppy.com/images/cs/1000.14.124.403Forbidden.png|http://blog.stealthpuppy.com/images/cs/1000.14.124.403Forbidden.png]

Avi h264 will not show video

Hi all, I am completely baffled at the moment. I am running 2 systems, both with adobe premiere elements 10 and full content packs. I have also installed k-lite codecs pack on both machine. One is a dell i5 lptop and the other is an i7 tower. I am editing the same set of videos, I have copied a set to my desktop and have another set on my laptop. The issue is this:
On the laptop I open premiere, get media and select the avi file I want to edit, the file appears and you can see the image of the video file. It is then OK to work from and edit.
On the desktop, I open premiere, get medi and select the avi file I want to edit, the file appears but this time there is no image just the audio sign. I try to put it intot he video timeline but it only imports the audio.
I have been stumped all night. Why will it work on one machine and not the desktop?
Please can someone help me with this?
The format is h264 mpeg-4 (part 10)
Cheers
Darryl

If you are the person who I direct here from the PPro forum, the answer is the same
H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115

Correctly installed Firefox Flashplayer (v10.1.53.64) does not show video in Firefox (v3.6.7) under Windows XP, Vista, 7

Hi all,
I am experiencing this mysterious flash player video rendering problem on my website www.cc-exotic-home.com (see tag cloud box with animated text on the left side "Ihre Suchbegriffe").
Using Firefox version 3.5.x and older on all operating systems the tag cloud video is running w/o problem. As soon as I use a 3.6.x Firefox version (with a correctly installed flash player plug-in version 10.1.53.64) the video is not showing anymore, even though the Firefox plug-in seem to be up and running.
I experience this problem ONLY in Firefox...all other browsers are fine (latest version of IE 8.0, Safari, Chrome, Opera).
Can anyone help me with this strange problem...?? I couldn't get any useful help at the Adobe Support Forum...
Here's the page source code:
Ihre Suchbegriffe
Your expert help is highly appreciated!!!
Regards
SABRY
== This happened ==
Every time Firefox opened
== I access website www.cc-exotic-home.com (tagcloud box left side "Ihre Suchbegriffe")

Hi weater15,
I am running on v 3.6.8 already...and it didn't solve my problem... thanks for your suggestion anyway...
Are you running on an Windows OS ? I still can't understand why people from outside Germany seem to be able to view the content in firefox 3.6.x and many users in Germany experience the same problem as I do...it's so strange...

PDF file is not opening in ipad mini,pdf file does not show any containts in file ,tried all options , please suggest solution

Hi Friends
i am not able to read some of the important pdf from ipad mini,pdf is opening but not showing any containts,i tried all suggestion priviously given in discussion forum (reinstallation,formatting,system upgrade,mailing pdf document )
can any one kindly suggest solution for above problem ?

Try and install free Adobe Reader to save and read your PDF files.
https://itunes.apple.com/sg/app/adobe-reader/id469337564?mt=8

AVI file does not show video

Similar Messages

Maybe you are looking for