Avi file FCP2

In FCS2 what is the best way to convert an avi file shot in 16:9 to match media shot in 4:3 dv. I don't have access to the original footage, and a vast amount of footage from different times is being used however it is all captured correctly. How would I go about converting it, removing the blacked out "letter head" bars, and scale it for the best possible quality? This is the file info
Filename: Fashion Show & Chosen Show 01
Duration: 00:17:55:20
Average Data Rate: 3637k/sec
Video Track 1 (3.6 GB)
Duration: 00:17:55:20
Frame Size: 720 x 480
Color Depth: 24-bit Color
Codec: DV/DVCPRO - NTSC at Medium Quality
Frame Rate: 29.97 fps
Average Data Rate: 3512k/sec (117k/frame)
Audio Track 1 (Stereo, 131.4 MB)
Duration: 00:17:55:20
Average Data Rate: 125k/sec
Format: 16-bit, Stereo
Sampling Rate: 32.000 k

Select one of the affected videos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder Window should open with the file selected. Does it?

Similar Messages

Quicklook no longer working with AVi files in 10.7

Howdy,
Mysteries abound! Updated to 10.7, and ever since, I have been having two problems:
1. AVI files no longer open open using QuickLook; all I get is is the AVI icon, and the "Open in VLC" button.
2. The icon preview for AVI files is no longer displayed as well; only the generic VLC icon shows (and yes, I have the "Show icon preview" box cheeked in the Finder preferences).
Is anyone else having the same problem? Does anyone know how to remedy this? Thanks in advance! (^_^)

Flip4Mac (installed) and Perian (installed) provide this support. As a matter of fact, I can play AVI and WMV in Quicktime 10.2 and 7.6.6. It's the Finder or the QuickLook subsystem what has a problem.
Besides that, having those QuickTime components installed, there are no problems in a new installation from scratch in a nother disk. But I'm trying to avoid that and to restore in Mountain Lion part of the functionality of my Mac under Snow Leopard.
There should be a preference, cache, temp file or something like that that is impeding QuickTime or the Finder to access the necessary components to preview and quicklook AVI and WMV files.

Playing inserted avi files in Adobe Acrobat 9 or later

A user has inserted avi files into Adobe and it always worked up to version 8.1.
Any version later than that, the avi files will not play anymore.
Is there any way to make them play or will all his files need converted to another source?
Converting them all to a different format would be quite the task as there are many videos involved.
Thanks, Jeff

You can't edit Excel files in Adobe Acrobat.

I can't open .avi files in Photoshop CS5

I used to be able to open .avi files in Photoshop just fine, but I’ve just tried opening one again after a couple of months and I can’t. It’s just black blankness. I have no problem with .mp4 files, but unfortunately, most of the videos I'm trying to make gifs out of are in .avi format.
Is it because I've updated QuickTime? Or is it that Adobe CS no longer supports .avi files? It says here that Photoshop CS6 supports the .avi format.
My specs:
OS X Mavericks 10.9.4
Photoshop CS5.1
QuickTime Player 10.3

I used to be able to open .avi files in Photoshop just fine, but I’ve just tried opening one again after a couple of months and I can’t. It’s just black blankness. I have no problem with .mp4 files, but unfortunately, most of the videos I'm trying to make gifs out of are in .avi format.
Is it because I've updated QuickTime? Or is it that Adobe CS no longer supports .avi files? It says here that Photoshop CS6 supports the .avi format.
My specs:
OS X Mavericks 10.9.4
Photoshop CS5.1
QuickTime Player 10.3

Unable to play Cineform avi files in Premiere Pro CS3

I am using Cineform NeoHD version 5.3.2 to convert the MXF files from my Canon XF300 into Cineform AVI.
Then I import these AVI files into Premiere Pro CS3 and here is where the problem begins.
Premiere is unable to play these Cineform files. All I get is about a second of audio, and a still frame of the video. This happens both in the source window, and also on the timeline.
The Cineform AVI files play perfectly fine when using Virtualdub for playback, but Windows media player behave just like Premiere.
Everything worked fine a week ago. Premiere appeared to use something called "ffdshow" to play the Cineform files, and I could edit without any trouble.
A few days ago, when I tried the same, that's when the problems came. Whenever I hit Play button in Premiere, a popup window came up, saying Premiere wanted to use ffdshow, and the options was "never", "no once", "yes once", "yes always".
When everything worked a week ago, I had to use the "yes always" option.
Now, it does not matter which option I use, Premiere will not play the Cineform files.
I did not make any changes to my computer between the day everything was okay, and when the problem appeared.
A Cineform representative suggested "ffdshow" is the troublemaker, so I uninstalled ffdshow and removed any traces of it I could find, but the same problem still exist.
Then I uninstalled Cineform NeoHD
Uninstalled and reinstalled Production Premium CS3 suite
Reinstalled Cineform NeoHD
Still same problem, nothing has changed.
It does not matter if I use 50i or 25p source files.
My system: (Laptop)
Windows Vista ultimate 64-bit
Intel 2,66GHz quad core CPU
4GB ram
Nvidia Geforce 8800M GTX
3x internal 7200rpm harddrives set up with raid-0
Anyone else experiencing this?
Any ideas what might be wrong?

dont know , but this stuff might fix your prob.. overwrite whatever ffdshow screwed up...
cfrepair utility:
http://www.siliconimaging.com/DigitalCinema/SiliconImaging_support.html
cineform codec (neo player)
http://estore.cineform.com/NeoPlayer.aspx
never used the cfrepair thing..but did install neoplayer which gave me the codec to use cs3 with cf raw files ( sample of cf raw at the si 2k site -- avi ext )
ps.... to keep overhead down on my computer I took the resulting cineform "player" out of my startup directory....as it wants to run in background when you install it...no need for that for my purpose of just getting the codec

Quicktime doesn't open AVI file with Perian installed

I have installed Perian but Quicktime X doesn't open AVI files for a week. I have repaired permissions. But Quicktime only plays the AVI file if I reboot the Mac. VLC always plays the file. The AVI codec is XVID. Quicktime doesn't play other formats such as FLV. I have deleted .plist files, com.apple.QuickTimePlayerX.plist. I have found other files(com.apple.QuickTimePlayerX.plist.0GH3f31, com.apple.QuickTimePlayerX.plist.0h9MBzV...) that I deleted also. Any idea? Thanks

And now ... surprisingly I view AVI files in Quicktime without Perian.
QT has very limited AVI support (file type and a few older codecs) built in. Most common codecs use by Windows users, however, require the additional support provided by Perian. If the AVI files are now playing in QT without Perian, then simply check the Inspector, Properties, or Info window to see which codecs are in your AVI file and you should be able to tell if they are among those supported "natively" by QT. Also note that this regaining of the ability to play your files may indicate a component conflict of some sort may have existed previously.

No link to the local .avi files after exporting Crystal report as .pdf

Hello all,
The overall scenario is like-
My application fires a query on SQL Server database and result of that query is stored in a Dataset. This dataset is set as a datasource to the Crystal report. Now some, records (returned by the query) have .avi files(i.e. Event Videos which are stored on the local hard disk) associated with them. I have stored these .avi files in a specific path on local Hard disk say "C:/EventVideos/*.avi" .   I used a special format in these avi files name. (like - "EventVideo_1.avi" (This is for 1st event), "EventVideo_5.avi" (This is for 5th event)etc. to identify which avi is for which event. All events do not have avi files associated with them)
      Now, I take one Text Object in crystal report. Using it's Format editor created a formula for hyperlink as -
      "file:///c:/EventVideos/EventVideo_" + {DataTable1.EventID} + ".avi" .
EventID is the field of dataset which has ID's (like 0, 1, 2, 3, 4 etc) of all resulted events. It is of a String data type.
     Now when I export, my report as .xls, .rtf, .doc, I can open the avi files. When I bring cursor on this Text Object, cursor get change to Hand and after click on it avi file start to play.
     But if I export it as .pdf, it does not contain the link for avi files. When I bring cursor on this Text Object , it does not change to Hand, and after click on it nothing happens. No video play.
I stick to this problem. What should be done in this case?
Appreciate your help.
Thanks in advance.

duplicate - please do not post multiple times

I was wondering if i plug a hard drive into my apple extreme will i be able to play avi file from it via an apple tv?

I am in the market for a TV media player. I have a lot of videos and photos on an external HDD and i would love to be able to play them on my big new TV. I have been thinking about buying a "Buffalo home theatre" or a "WD TV Live". BUT..... I would like to stick to my Apple products and so was wondering if ...
a) You can plug a HDD into an Apple Airport Extreme. I currently have an Airport Express but want to upgrade.
b) If i plug a HDD into an Apple Airport Extreme, would I then be able to Access the avi and mkv files from my HDD and play them through Apple TV.
Does that make sense?
I wish the apple TV had a usb port, that would solve my problem.

Welcome to the Apple Community.
Yes you can plug a drive into an extreme, but the Apple TV will not play AVI (with noted exception) or mkv files.
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Unable to open AVI files in Photoshop CS6

Unable to open AVI files in Photoshop CS6
I am running PS6 and want to open and edit AVI files. When I try to do that I get an error message saying "the video file cannot be opened" . This seems to apply to ALL avis - yet I can open and edit MP4, MMV etc. I installed Gspot to track whether it was a codec issue and when I try to open ANY file I get this error message : "Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec. This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers. It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow. GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem. The codec was tentatively identified as: C:\Windows\system32\imaadp32.acm Unknown video codec #11" I have NO idea where to go from here. I see a site to download the "imaadp32.acm" codec but what about the "Unknown video codec #11". What the heck is that and what do I do about it. Any help would be appreciate, Cliff
ps I should add that the avi files DO open and play in Bridge. I have the latest Quicktime. Everything is up to date and PS and the computer is otherwise working perfectly !

Thanks Curt and 'Mylenium'
I did re-set the prefs - but to no avail
I checked and my graphics driver and audio is all up to date.
No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
Cliff

How to deal with scratchy sound in AVI file from BetaCam masters

Recently, I got out some BetaCam edit masters of videos I produced in the 1990s. The university instructional technology center transfered the masters to Mini-DV tape, then made AVI files from the Mini-DV tapes. The AVI files sound fine when I play them from my hard drive, but when I use the AVI files in Premiere Pro CS4 and 1.5, the sound is scratchy--sort of like a scratchy record. So then I got the Mini-DV tape and decided to import the program, playing it on my Canon GL1 camcorder and capturing it in PP CS4. But the sound is even worse. Please advise. These programs are too important to not be able to convert them to YouTube and DVD formats.

If things work OK in "programA" but not in "programB" (B being Premiere) that is usually a codec issue
AVI is simply a wrapper... what is the codec?
The first question at the end of this link has a link to the free GSPOT to find the codec
First, work through all of the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of that link

How to store .avi files on a DVD

I have FCP 3 and a Mac G4. I edit short video clips for a "webumentary" www.cavebiota.com and send the files to a webmaster in another state. The webmaster prefers .avi files which I can supply on a CD if the clip is less than 650MB. Some clips, though, are bigger than the capacity of a CD and I would like to store them on a DVD. The problem is that the DVD program on my computer won't accept .avi.
I don't want it to end up as a DVD movie, just for storage like a CD-ROM
disc.
There's a technique known as DVD-RAM that is used to store 9.4 GB on
special DVD-RAM disks
But I'm fairly sure there's a simple way to do it on regular DVDs.

Unless I'm missing the point here, you don't need any additional software to burn a data dvd.
Insert blank DVD. If any dvd burning software opens, close it.
Drag file to DVD icon.
File>burn disc.
Treat it just like a humongo cd.
Gobble gobble.

How can I edit .avi files in FCPX?

What's the best way to convert .avi files so they can be edited in FCPX and then "shared" with iPad and Apple TV2? Definition of best meaning least amount of time and effort without noticeable degradation of quality. I'm an advanced amateur photographer with increasing interest in video but limited knowledge of the technical aspects.
Now shooting HD with a DSLR camera but have over 100 hours of home/family video taken with Canon GL1 (mini-DV tape) then captured using Sony Vegas Pro. Captured files are .avi, NTSC, 29.97, 720x480, interlaced, 15 minutes or less duration.
Re-capturing original DV tapes to FCPX would be very time consuming. Don't know why but Vegas Pro 8 running on my older PC (Windows XP) refuses to render out to any of the QuickTime presets including uncompressed. Have Adobe Premiere Pro CS5.5, FCPX and Compressor running on new iMac.
My "trial and error" approach isn't working. Main problem seems to be with de-interlacing. Have converted .avi files to ProRes 422 using both Adobe Media Encoder and Apple Compressor. Interlacing "jaggies" are apparent with both when edited in FCPX. Jaggies can be eliminated using combinations of "progressive" field order and "blend frame" output option but this results in artifacts and/or noticeably soft image. Best results so far are by converting .avi to ProRes 422 using Adobe preset (lower field first) then using Apple Compressor's "Apple Device: SD for iPad …" output preset to convert the ProRes 422 to .m2v. Still seems a little fuzzy on iPad but maybe my eyes are just wearing out from all the hours I've spent on this problem.
Thanks in advance for your time and any help you can pass along. The more I work with FCPX, the better I llike it.

MPEG-4 isn't nearly enough information. There are many other factors that determine whether it will work in FCP. Many MPEG-4 files can be imported and optimized directly into the application.

How can I change the default video conversion applied when I copy an AVI file from my PC to my Android HTC One M8 phone?

Here's the situation...
I have an Android HTC One M8 phone which I connect via USB cable to my PC, then I use Windows Explorer to drag and drop an AVI file from my PC onto a target folder on the phone. When I would do this after I had first purchased my phone a message box
would come up with the heading "Convert and Copy" and ask me "Do you want to convert <filename> before it's copied to your device?" and give me the options "Yes, convert and copy (recommended)" or "No, just
copy Your file will be copied, but might not play on your device."
If I chose to convert it converted the file to MP4. No problem, that's what I wanted.
The problem I now have is that after doing some work with other video applications a while ago where I was outputting WMV files I now find that the default conversion for the above described copy from PC to Android phone now converts files to WMV.
I simply want it to go back to converting video files copied to my phone as MP4, but I can't seem to find where I can set this!
It appears that the copy/conversion process in Explorer is being handled in the "Portable Devices Shell Extension" dll - WPDSHEXT.DLL
Can anyone tell me what I need to do to set the default video conversion back to MP4 ???
Thanks

Thanks Rob.
I actually had no clue what the core problem was caused by. So it's Windows itself...that helps some.
I'll resubmit there. It might actually have saved time for it to simply have been moved to there instead of off-topic, though I suppose you have to follow protocol.

I have AVI files that I need to be MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I have AVI files that I need to convert to MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....When I have the files open in QT Pro do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I strongly recommend you use compressor to do the conversion (if it will open the files - since quicktime will open them, it will more than likely do it.
Compressor allows you to customize presets and save them and apply them to multiple files. Although the interface may seem daunting, it's actually pretty simple.
Even if you can edit the avi in fcp, it's not a good idea. Liable to cause problems down the road.

I would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players...thank you

i would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players..also is it possible to upload store boughten dvds/bluerays to my macbook..if so does anyone know how one would do that ? im just getting used to this mac and i do love it but alas i am comp stupid hahaha...thank you

Toast Titanium by Roxio.

Avi file FCP2

Similar Messages

Maybe you are looking for