AVI file video plays too fast, but audio and noted length correct

I have a one minute AVI file. Premiere correctly says the frame rate is 29.97 and it is 60 seconds long. But when placed in the time line the video plays at about 6x speed and is finished in 10 seconds. The audio keeps playing for the correct 60 seconds. I rendered it and no change. Any ideas?
Thanks - Bruce

Does Streamclip allow you to choose between Type 1 and Type 2 DV AVI? If so then you want Type 2 in your conversions.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

Video playing too fast

Don't know if anyone else has this problem but for some reason I was and I seemed to find a weird work around. I had an AVI, divx codec, ac3 audio that the video was playing WAY too fast but the audio was fine. Well, seems that Quicktime is getting the frame rate screwed up and when I opened it, if I immediately to to "Movie Properties" to look at the frame rate it will play fine. If I try to play it and then look at the properties it won't play right. Almost as if it has to find out what the frame rate is at the beginning. Very weird but a bit of a work around for now. Hopefully this will be fixed. It was using Perian to play it.

I have experienced a similar quirk, with several different videos, including .m4v clips that I have downloaded or created myself. The problem doesn't occur when previewing the movies in the Finder, nor when playing them in iTunes. However, if I open the files with QuickTime, the video plays faster than normal, but the soundtrack plays at the original rate! I tried your solution of opening the Movie's Properties first, and it does seem to work. Of course, this is only a workaround for now. Obviously, something needs to be tweeked in Leopard or Quicktime —most likely both— to eliminate the quirk entirely. I am very surprised by this problem because one would think that Apple's own software products would be more compatible than third-party programs! Yow...!

Videos play too fast on ipad - sounds like super high speed mini mouse

We just bought the ipad and when we play videos on vimeo or youtube they play at an ultra high speed like the fps is messed up - it sounds like a record being played too fast
Is this our ipad or a setting - we are worried because we do not see the problem listed anywhere else.
Thanks!

Have your rebooted/restarted your iPad? you do that by pressing the Home and power/sleep button at the same time until the slider to power off the iPad appears. Slide the slider and when screen activity stops depress the two buttons again until the Apple logo appears. When the iPad completes rebooting try again to see if that solved your problem.

Microsoft 2000 OS, all videos playing too fast, what to do?

Have MS 2000 Professional OS
All online streaming videos (like youtube) playing too fast, extremely annoying rushing "chipmunk" effect.

Word is getting around on the internet that Apple has basically stopped monitoring and moderating these forums. Expect to see this sort of thing increasing. If Apple isn't going to keep a lid on trolling like this then they had better just shut the forums down. It won't take long for these forums to be totally overrun by Mac bashers, trolls, and Windows fanboys. There's something about the Mac that scares them and makes them feel insecure.

Drop zone video playing too fast

I am building a Motion title sequence with a drop zone for video. I placed it into FCPx as a connected clip (purple timeline box), and associated the video under it to the drop zone. It all works except the video dropped in plays super fast, far out of sync with the audio below. Not sure why.
My FCPX timline, source footage and motion file are all the same frame rate, 23.98. Any ideas?

Where can you place a marker en set the project loop end. Because can place a marker and then go to edith marker. But i see no list as above?
1. Deselect any objects in the Timeline. Select Mark/Markers/Add Marker. If that menu item is not available, make sure there are not layers selected in the Layers window.
2. A timeline marker will be created at the playhead. When the playhead is on that marker, the Edit Marker menu item will become available.
3. Select Mark/Markers/Edit Marker. This brings up the dialogue where you can Name, Comment and select the marker type. Choose Project End Loop from the Type menu, then click OK.
4. Drag the Marker to the end of the timeline.
Adrie, I have not encountered your problem with freezing drop zones. In the past I have had many drop zones playing simultaneously, so it should work. If you suspect that you have a bad install, you should probably reinstall it before troubleshooting any further to eliminate that possibility. I am running a fresh install of 5 on a system that has never had 4 on it.
Where did you find that tutorial? do you have a link.
Ripple Training - Motion 5 - Rigging and Publishing

Exporting for DVD - exported video plays too fast

Hello helpful people!
I'm fairly new to Premiere - but familiar with Final Cut. Using Adobe Premiere Pro CC v8.1 on a MAC. I have a video that was shot in 1080p, and I picked sequence settings to match (or so I think).
The video looks great in Premiere, and I need to create DVDs to send to the UK (I'm American), and they will have to be able to play in a standard dvd player over there. My understanding is that PAL would be the wiser choice for encoding. I'm trying to keep the export simple, and I've exported it multiple times using both PAL and NTSC, and while the audio files are fine - for both PAL & NTSC the video files are significantly shorter than the actual film, and plays in a sort of fast-forward effect. In Premiere, the film plays at 17 minutes, but when I open the exported .m2v files they are only playing at 14:33, - or one that I finally (somehow) got up to 15:00 minutes. That 15 minute one I got from not tweaking the settings at all - on the previous ones, I had read somewhere to increase the bit rate and use VBR Pass 2 for better results. However 2 minutes off is still a big problem.
Below are screenshots of the sequence settings, and the most basic export settings I've used - example of the NTSC.
Any help is hugely appreciated! Thanks

I personally consider QuickTime the bane of video production whose use needs to vanish from the landscape quickly and permanently. Give VLC a try instead.
VideoLAN - Official page for VLC media player, the Open Source video framework!
I say just go ahead and author the disk. Chances are good it'll work correctly.

Plug in videos playing too fast in Safari

Whether it's youtube, the Fan vids on the Comcast page, or Quicktime videos, they are all playing twice as fast as they should be, with chipmonk sound to go with it... please help.

Hello,
Go to your System Preferences/QuickTime/Streaming. Where it says: Streaming Speed click:
Automatic.
See if that helps...
Carolyn

FLV sometimes plays too fast

Hi,
Can any one help how to resolve the issue some flvs play too fast but same flvs play normal most of the time. I am using NetStream class to play the flv.
here is play method I am using and link of demo and entire source.
private function play():void
if(btnPP.label == "Play"){
stream.resume();
else
stream.pause();
Please see this link : http://ec202.classicinformatics.com/demo/cropper/
Thanks in advance,
Prem

Green Kiwi wrote:
> Could be. I used a piece of free software from
1and1.co.uk (they host my site)
> its called Prism Video Converter. Never used it before
but was very simple. So
> simple that it never even talked about encoding.
>
> I do have flash 8, but I've only had it about a week and
don't really know
> what I'm doing. I know that it can convert video into
FLV format. Do you think
> I should try converting it through Flash 8 instead?
I think you should give it ago, the Flash Encoder is straight
forward
from what I remember.
Steve

Xha1 24F footage Video plays fast but Audio is normal. PPro 2.0

Hey Gang, I am having some trouble with my 24f footage from my xha1 into PPro 2.0. I have installed the canon F presets and imported footage using the 24f setting but when I play it back in the timeline my video/audio is out of sync. Even when I export it nothing changes. My video is playing to fast, but my audio is normal. I have played around with unlinking footage and trying to find the correct video speed, with no luck. I have also tried using the footage on 30f timelines with no luck either.
I have looked around for the answer but nothing of this particular issue has come up.
Any thoughts?
Much appreciated.

Apart from the much better job done by freeware like HDVSplit or shareware like Scenalyzer, than has ever been delivered by Adobe for $$$, it is worth noting that all HDV cameras, like the H1, A1, G1, Z1 and all the other models available, have one thing in common. They all use a tape recording mechanism.
People often forget that this tape mechanism runs at a pre-defined speed, enabling 50Hz (PAL) or 60Hz (NTSC). Nothing else. Even if you set your camera to 24P or 24F or whatever other settings are available in the camera, the tape speed is not changed. The tape runs at the same speed regardless of your camera settings. Keep that in mind when capturing.

FLV inserted to page no probs but plays too fast!

I've used the Insert Flash Video feature on dreamweaver 8 to
add a video clip to one of my family web pages
www.nzgreens.me.uk/house
It has up loaded and plays, but is far too fast.
We've moved to New Zealand and it's for our family and
friends in the UK to view. Please please please can someone tell me
why it would be playing too fast?

Green Kiwi wrote:
> Could be. I used a piece of free software from
1and1.co.uk (they host my site)
> its called Prism Video Converter. Never used it before
but was very simple. So
> simple that it never even talked about encoding.
>
> I do have flash 8, but I've only had it about a week and
don't really know
> what I'm doing. I know that it can convert video into
FLV format. Do you think
> I should try converting it through Flash 8 instead?
I think you should give it ago, the Flash Encoder is straight
forward
from what I remember.
Steve

Audio book plays too fast on the ipad - how do i fix it?

audio book plays too fast on the ipad - how do i fix it?

While I don't listen to audiobooks on myh iPad, the following might apply in your case:
When you navigate to the player controls in the iPod app, in older OS's, and perhaps still in the Music app in iOS 5, you will see a variable speed control on the right hand side of the scrubber bar. Sequential taps on that change the speeds.
This does appear in spoken content only, I think, as I see it in podcasts all the time. It's not there for video or music content, so I'd expect it to appear for Audiobooks as well.

When sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

when sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please email me details and I'll add them to the User Tip.

The video picture is hang but audio keeps playing

We are using FMS3.5 for VOD streaming. It’s spotted that when we are using Flash Player Version = WIN 10.0.42.34/10,0,45,2, it is encountered that the video picture is hang but audio keeps playing after our commercial break point. we will first pause the video content and then use the same object to play the instream ad. After that, the video is resume when instream ad complete.
Thanks for helping!

Hi,
Can you pls pass me the client side code?
Need to check if you are doing the right thing.
Let me know the type of VOD and ad contents you are using.
You can write me at [email protected]
Regards,
Janaki L

Music/audio plays too fast

using a new laptop (this compaq) and installed itunes. All music/audio, whether from a CD, or itunes or the audio from a website, plays too fast. I've tried lots of things -found a page in the support section (tried all except the driver thing) -- ANY THOUGHTS?? THis is driving me crazy and can't do anything w/ my ipod except listen to what's already on there!

You may want to check your soundcard output in QuickTime. See this post for directions on the process: http://discussions.apple.com/message.jspa;jsessionid=aXxb7IZbMDPmI_4E?messageID=814726&ft=y&#814726
And this Article: iTunes and QuickTime for Windows: Songs and other audio don't play correctly
And before you do any of the above, make sure that you have all the recent Windows Updates from windowsupdate.com. Make sure you have the latest drivers for your particular sound card, and make sure you have the latest DirectX installed. Any of these could also cause this problem without QuickTime being the culprit.

Streaming audio plays too fast on car stereo

Streaming audio plays too fast on car stereo with iPhone 4S

how do you play it on the car stereo?
because if it's using the 3.5mm headset connector or even the analog out from the pin30 then it's
100% the same sound output from the phone as it provide a headset

AVI file video plays too fast, but audio and noted length correct

Similar Messages

Maybe you are looking for