.AVI glitches after import

First I should mention that everything I say in this post is something I did with only the most vague understanding of what I'm doing.
I imported an .AVI, which plays fine everywhere else, and in the playback in Premiere and after exporting the video glitches out to where the frames will get mixed up with some lasting a full second overlayed over other frames. I'm sure there's a word for that. The audio is flawless, though.
So I did some Googling around and found that it might be due to a missing codec, and after downloading G Spot and analyzing the file it said that I was missing the Microsoft Video 1 codec required for it. After more Googling and installing every codec pack that wasn't filled with malware, I came across the ffdshow decoder, which I then ran and used to enable the aforementioned codec in both the video decoder and the VFW configuration. I thought that would surely take care of it and booted up Premiere again, where after another import the video was still glitching.
Here's what G Spot and ffdshow say right now-
And again, I know what these things mean on the most superficial level so if I have to do anything fancier than check a box I could probably use the talking-to-an-old-person version.
And if this question has already been answered somewhere I haven't come across it after an hour and probably a hundred tabs of searching.

>footage recorded from my computer
Does that mean you are using Screen Capture Software?
If yes... some reading that may help (ALL notes, since you did not specify your screen capture software)
Some of these notes are for Premiere Elements, but may help with PPro
Fraps & Elements http://forums.adobe.com/thread/871095
-and more Elements http://forums.adobe.com/thread/943772
-and yet more Elements http://forums.adobe.com/thread/967201
Camtasia http://forums.adobe.com/thread/836800
-and http://forums.adobe.com/thread/775288
-and http://forums.adobe.com/thread/453044
-and http://forums.adobe.com/message/3202148
Techsmith codec http://forums.adobe.com/message/3692768
-and http://forums.adobe.com/thread/1046914?tstart=0
BB Flashback http://forums.adobe.com/thread/1074014
XSplit recorder http://forums.adobe.com/thread/1160940
Elgato http://forums.adobe.com/thread/1163126 w/picture
Dxtory http://forums.adobe.com/message/5172056
Bandicam read #10 http://forums.adobe.com/thread/954394

Similar Messages

Blu-Ray 5.1 DD SS Audio Glitch after import into Encore.

Working on burning a full length blu-ray with two audio track options (stereo audio, 5.1 DD SS) I'm not having any problems connecting menu's or burning. After the initial burn everything was working flawlessly except when I played the video with the 5.1 DD track I noticed the audio would glitch at certain parts. The glitch sounds like a CD skipping (i.e the speaker would say Bubble and it would sound like Bu-Bu-Bubble) the audio doesn't go out of sync when this happens, it's small and the video keeps playing but it's still noticeable and an issue.
Both audio tracks are one complete track, no cuts or seperate clips. The 5.1 track is .ac3. The stereo track is mixed from the 5.1 track and doesn't have the glitch at all. I've gone back and checked the source audio and haven't noticed any transients or spikes at the places where it glitches. The problem occurs when I pull it into encore. Even before burning the audio will error inside the timeline preview. I'm not transcoding the audio or video at all as I have manually compressed the video already. Everything is perfect except for this glitch and I'm all out of ideas of what Encore is doing to the audio to create the skipping glitch any thoughts or ideas would be great. Hope i've given enough information. I'm new to the forum so please let me know if i've left anything out or missed any etiquette.
My system:
Encore CS4
FCP 7
Mac Pro 2 x 2.93 GHz Quad-Core Intel Xeon
12 GB Ram
10.6.6 OSX

CalebMonroe wrote:
neil wilkes wrote:
the_wine_snob wrote:
To Encode the DD 5.1 SS AC3, what program did you use, perhaps the SurCode plug-in for PrPro?
What is the Bit-Rate of the DD 5.1 SS AC3?
What is the brand of the blank media?
Good luck,
Hunt
Most likely he used Apple's Compressor, Bill - the system specs state FCP7 is being used.
Bitrate is a valid question though.....this should be no higher than 640kbps (and IMHO certainly no lower - DD sucks at the best of times)
Sorry for the long reply back guys. We had the audio work for this project outsourced so I had to await details to your questions. The bitrate is 457.67 kbps so the bit rate shouldn't be causing the issue. The audio was completely pre mixed in Pro Tools and they just sent us a ready to use .ac3 file. Hope this helps!
CAleb
Hey Caleb.
Thanks for the details -and that is probably your problem.
457.67kbps is nothing like DVD-Video compliant, and almost certainly not BluRay compliant either.
For BluRay, you should be using 448 or preferably 640kbps.
DVD uses either 448 or 384kbps Dolby Digital, and the figure you are giving is extremely odd, looking almost like a VBR encoding which DD should never, ever be. Using 384 gives you unidirectional content above 10kHz (IE, mono) and 448 gets it all the way up to around 14 or 15kHz before it goes unidirectional. In all frankness, there is no good reason at all to use Dolby Digital as it sucks - badly - and all BluRay players are required to decode at the very least DTS Core Audio (1536kbps) which is fully discrete all the way to 20kHz.
I think whoever you outsourced this to got the DD encoding wrong - simples!

AVI with ac3 import problem

hi
sorry for my bad english
0.avi opens in adobe premiere pro cs6 without any problem.
mediainfo result for 0.avi:
General
Complete name                            : C:\Users\User\Desktop\****\0.avi
Format                                   : AVI
Format/Info                              : Audio Video Interleave
File size                                : 232 MiB
Duration                                 : 18mn 52s
Overall bit rate                         : 1 722 Kbps
Video
ID                                       : 0
Format                                   : MPEG-4 Visual
Format profile                           : Advanced Simple@L5
Format settings, BVOP                    : 1
Format settings, QPel                    : No
Format settings, GMC                     : No warppoints
Format settings, Matrix                  : Custom
Codec ID                                 : XVID
Codec ID/Hint                            : XviD
Duration                                 : 18mn 52s
Bit rate                                 : 1 261 Kbps
Width                                    : 720 pixels
Height                                   : 304 pixels
Display aspect ratio                     : 2.35:1
Frame rate                               : 23.976 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.240
Stream size                              : 170 MiB (73%)
Writing library                          : XviD 65
Audio
ID                                       : 1
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 2000
Duration                                 : 18mn 52s
Bit rate mode                            : Constant
Bit rate                                 : 448 Kbps
Channel(s)                               : 6 channels
Channel positions                        : Front: L C R, Side: L R, LFE
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Stream size                              : 60.5 MiB (26%)
Alignment                                : Aligned on interleaves
Interleave, duration                     : 32 ms (0.77 video frame
but when i import 1.avi it gives error:
the file contains an unsupported audio format.
mediainfo result for 1.avi:
General
Complete name                            : C:\Users\User\Desktop\****\1.avi
Format                                   : AVI
Format/Info                              : Audio Video Interleave
File size                                : 67.2 MiB
Duration                                 : 4mn 27s
Overall bit rate                         : 2 106 Kbps
Video
ID                                       : 0
Format                                   : MPEG-4 Visual
Format profile                           : Advanced Simple@L5
Format settings, BVOP                    : 1
Format settings, QPel                    : No
Format settings, GMC                     : No warppoints
Format settings, Matrix                  : Custom
Codec ID                                 : XVID
Codec ID/Hint                            : XviD
Duration                                 : 4mn 27s
Bit rate                                 : 1 500 Kbps
Width                                    : 704 pixels
Height                                   : 384 pixels
Display aspect ratio                     : 1.85:1
Frame rate                               : 23.976 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.231
Stream size                              : 47.9 MiB (71%)
Writing library                          : XviD 64
Audio #1
ID                                       : 1
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 2000
Duration                                 : 4mn 27s
Bit rate mode                            : Constant
Bit rate                                 : 384 Kbps
Channel(s)                               : 6 channels
Channel positions                        : Front: L C R, Side: L R, LFE
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Delay relative to video                  : 32ms
Stream size                              : 12.3 MiB (18%)
Alignment                                : Split accross interleaves
Interleave, duration                     : 32 ms (0.77 video frame)
Audio #2
ID                                       : 2
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 2000
Duration                                 : 4mn 27s
Bit rate mode                            : Constant
Bit rate                                 : 192 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Stream size                              : 6.13 MiB (9%)
Alignment                                : Aligned on interleaves
Interleave, duration                     : 32 ms (0.77 video frame)
and when i extract video and ac3 file from 1.avi with avidemux then i can import them separately. but after importing audio and video in timeline audio length not same with video.
the length difference in the image:

Hi,
I don't have GraphicConverter and since it is shareware and money is tight right now, I tried to find a freeware image converter on the internet for the Mac. I didn't. I remembered that I have Photoshop Essentials. It came with my Canon scanner. I installed it and looked to see if it had a converter of some type in it. I saw that you can import a file, work with it and then save it to what you want. I thought that I had already done that with the Nikon files. Anyway, I tested it. I imported one of the Nikon images into it and saved it as a jpeg- even though it appeared to be a jpeg already. Bingo! It worked. It imported into my video editing program. I selected two other files from the Nikon shots and did the same thing. I change the name of the picture and then save it as a jpeg in Photoshop Essentials 2. The two files imported into my video editing program. I then went to the two original Nikon files that I had imported into Photoshop Essentials 2 and changed the names of them- leaving the jpeg extension on to see if they would import, they did not. So, as you said, there must by some kind of Metadata with those files. Bringing them into Photoshop Essentials 2 and saving them as jpegs fixed it. Because of what happened, I just went through my approx. 4,000 pictures and selected about 1,400 again for a new family DVD. I created folder and exported 1,446 jpeg pictures into it. Then I opened by video editing program and imported the folder. All 1,446 pictures came in. I didn't try it with FCE and iMovie, since I the program I regularly use is Adobe Premiere. I may try it later, but I am pretty confident that if the pictures can be imported into Adobe Premiere, they can also be imported into FCE and iMovie(unless there is a number limit.)
All this has taken place over several days. I am glad that it is figured out.
Thank you for the help.

Audio out of sync AFTER importing

Hello, how are you?
I've been searching for a solution for a while, but I can't seen to find any.
The thing is... I've been capturing some gameplay footage, with files that last an hour or even more.
When I watch the files in any player (Windows Media Player, VLC, Media Player Classic) they play fine, the audio and the video seems to be on sync and OK.
But after I import to Adobe Premiere, it just gets out of sync. Even when I watch in the Source Monitor, before dragging to the timeline.
It looks like there is a problem when conforming the audio.
But even the time duration is different from the original, there is some frames or even seconds of difference inside Premiere.
And this happens with different codecs, AVI (from FRAPS), H.264 (with AAC audio and MP3)...
I've tried cleaning the cache, deleting the software and reinstalling again, converting - everything.
Some are saying this is a recurrent bug on Adobe Premiere. Isn't there any fix or something that I could do?
It's really strange that the problems only occur AFTER importing. Outside of Premiere is fine, so there is no problem with the capture, right?
I would really appreciate if someone helps me. Thanks a lot!
PS: I have Adobe Premiere Pro CS6.
Intel Core i7
12 GB RAM
GeForce GTX 580
HD 2 TB 7200RPM

My problem is a bit different, though just as irritating. I can't believe Adobe hasn't fixed this given how long since the original post has been up here. I capture satellite programming from a professional c-band satellite every week. I use good old fashion Quicktime to capture 30 minute programs for later broadcast. Our job is to capture the video from the satellite, clip the commercials at the beginning and end of the program and then export a clean version as an MPEG2 file. Quicktime provides two capture settings: high (which provides a very large ProRes file in 16bit stereo) or medium (which provides a manageable H264 file in AAC stereo). Both are Quicktime files.
While I don't have sync issues with the ProRes file, the file that is captured using H264 and the AAC stereo gets pushed out of sync by just enough frames to make it necessary to fix. This is adding about 2 to 3 hours of studio time each week to our production given we have to process about a dozen of these files. Viewing the original quicklime files using the newest version of quicklime or the old Quicktime program and most other video players yields a perfectly in-sync experience; it's just when it's imported into Premier Pro CC 2014 that the sync. problem appears. One solution that has worked is taking the master file and exporting it again as a .dv file, but this actually takes longer than fixing the sync issue within Premiere. My guess is it may be the AAC audio process that may be the problem.
We only started using Premiere a few months ago and are already re-evaluating whether we should return to FCP. We were really like most of the Adobe apps within Creative Cloud, but we use Premiere to much to put up with such a major flaw. I do wish Adobe would monitor some of these forums; they have no idea how customer service plays a key role for future software purchases.

JVC Everio Audio Quality After Import

I filmed quite a bit of video using my companies JVC Everio in full HD 1920x1080. The camera natively shoots in .tod format. I flipped it to .avi using AVS Video Converter. Both files play fine in VLC player, and they look just fine. After importing into premiere, the videos will barely play, and are super laggy. They video doesn't match up to the audio in the source window at all. I'll set in and out points, and only the video will go to the sequence in the timeline. Once I drag the audio and match it up to the video i just dragged, the audio doesn't match. I have to manually fix it. Even still, the audio sounds HORRIBLE. Again, it sounds just fine in VLC player, it's only after I import it that it made a womans voice sound slightly deeper, and just terrible quality. Am I doing something wrong in the import? Are there some sequence settings I need to change? I can fix most of the video problems, I can even deal with manually adjusting the placement of the audio and video after each insert of video from the source moniter, but I simply cannot deal with the loss of quality from the audio. Please help, I'd love to provide any additonal information about the system or project settings.

You sir are a genius.
Hahaha... not a chance.
http://www.google.com/#hl=en&output=search&sclient=psy-ab&q=.tod&oq=.tod&gs_l=hp.3..0l4.18 38.3447.0.3618.4.4.0.0.0.0.165.323.3j1.4.0.les%3B..0.0...1c.1.5.psy-ab.xjJp2fSHMjE&pbx=1&b av=on.2,or.r_qf.&bvm=bv.43287494,d.b2I&fp=73136f47513e4cd6&biw=1053&bih=834

Help Needed : Video Glitch after exporting from Premiere Pro CC

Hi all ,
            I have been experiencing this issue for sometime now. I occasionally encounter a video glitch after exporting a video from Premiere Pro CS6 or CC. Sometimes it happens in my NLE timeline , which I have to remove the affected clip that has the glitch/flicker problem from my bin and re-import the clip from my original source, which solves the problem.
             However , the worst part is when the glitch/flicker happens when I have already exported the video when everything seems fine in the timeline of Premiere . My sequence settings do match with the clip . This issue happens intermittently as I always have to hope for the best when the video exports.
Here is an Example of what I mean, the glitch/flicker happens at 3:28 of the music video.
             Hopefully those who have the same issue can share how to troubleshoot this problem . Thank you.
Regards,
Elias Lo

what i did was install final cut pro. I dont have an answer for this but it finish my problem , how i came up with this idea well i have the new mac pro cilinder that looks like a trash can 64gb memory and all the toys to work fast but again the mov files cannot be seen in the desktop cause premiere and mac and windows and all this ******** they fight about , and i also have your problem big time o pn every export.
i have instal final cut onmy older slower imac and i can see everything and the export are perfect
so i just did that and its perfectly fine basicaly final cut does something that makes ur computer and adobe read all kinds of files frames format.   i try to explain this to this adobe premiere enginners but they just say uuuuhhhhh

Can not refresh snapshot changes after importing data of master site

Hello !
I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
thinks in advance!
(exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
(imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
null

You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
HTH,
-- Anita
Oracle Support Services
null

Apex Application not working after importing to my apps schema...

Hi friends,
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends.
As this is my urgent requirement in my project..Reply me ASAP...
Thanks in Advance..
Regards,
Harry...

First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Hard drive glitches after battery replacement... normal?

Hello, I have a 4Gen 20gig ipod with click wheel and I just replaced the battery myself last night.
I then plugged it into my computer to sync and it was recognized by windows, but not by iTunes, the hard drive would whir, then click and then try again, then stop. I figured it was just that the battery wasn't charged enough yet, so I let it charge overnight.
In the morning it synced fine. I was then playing it in the car, and some songs would appear, then the hard drive would whir, click a couple of times, then skip on to the next one. After a couple songs it started playing them normal. After skipping a few and the hard drive spun to load more music into the temporary memory, it would whir, click and then skip the song, then whir click and skip that one too... and it kept doing it. Then I reset it, and it kept showing the apple symbol, then the Exclamation and folder icon, then tried restarting again. After trying to reset itself 4 or 5 times, it finally succeeded.
I read a few threads on here, gave the ipod a gentle nudge on the right hand corner a few times, and now its playing and I haven't had any symptoms yet for about an hour.
Is this normal for a hard drive on an iPod to glitch after a battery replacement? I had no such problems when I had the other battery in it, so it's hard to believe that the hard drive is going bad exactly at the same time I changed batteries. It is the right battery for the right iPod, anyone else experience this or have any words of wisdom or comfort?

rsherid wrote:
Pretty fast and non-stop, even when I'm not working. Could it be dirty? Is there a way to clean it?
Does the Apple store charge just to look at something?
Even if the noise was a dirty hard drive you can't clean the innards of one. You cannot even open one. Well you can, once.

Problem on CLOB datatype after import

I got problem and call to Oracle support and they use DUL for extract data from datafile to dump file and I import everything is done and no error but when I check in CLOB datatype that have space(blank character) separate each character see below
Original
Oracle
After Import
O R A C L E
So the application cannot execute those data.
Anyone have solution how to fix this problem?
Thanks,
Taohiko

if you use a direct insert you are restricted to 4000 characters.
You can put your value in a varchar2 variable and that allows you to insert up to 32767 characters.
declare
my_clob_variable := rpad('x','X',25000);
begin
insert into my_table(my_clob_column)
values(my_clob_variable);
end;

My imported backup html files from another computer do not show up after import

I am currently transferring files from my macbook pro to a pc netbook. I already exported my firefox bookmarks via an external drive and accessed the html file on my new netbook. After importing the html on firefox on my new netbook, the bookmarks do not show up on my bookmark list.

Please see this article on how to move your bookmarks and settings from one computer to another: [[Moving your Firefox bookmarks and settings]].
Caution: Restoring bookmarks from a backup will overwrite your current set of bookmarks with the ones in the backup file.

Cannot edit chapter names in iDVD after importing movie from iMovie

I have no trouble customizing iDVD (version 5.0.1) menu page after importing iMovie directly (instead of going to QT as interim step). But the names of the chapter markers are file names for video clips, title pages and transitions. The iMovie help says to change the names in the space next to the 'thumbnails' of chapters found in iDVD. THERE ARE NO THUMBNAILS. And there is no way I could find, using menu options or clicking on the chapter frames shown in 'map' mode to type in anything.
There are other problems, like getting rid of the default "Travel Cards' stuff...like I can drop a still photo in for a custom background, but the default 'celluloid design' banner still rolls up in previw mode. If you can also help with that, great. But the main thing right now is getting these chapter names change.

VJK,
You are the third person who has taken a crack at this. I don't know if you read my last reply which detailed the situation. But if you did and the 'menu' you refer to is the main menu page, that is not the problem; I can change text there. I am talking about the submenu for 'Scene Selections', which I have only been able to access via map mode.
In map mode I cannot highlight the names. Period. Can't do it no matter where I place the cursor or carefully click.
In preview mode, when the Scene Selection sub-menu page appears whenever you drag the cursor over a chapter name it automatically highlights so any clicking will either do nothing (if a real careful click, trying to highlight text and not trigger off play of the movie chapter) or just start play for the movie chapter.
So...how does this newbie get to the 'menu' you mention where I can click on a chapter name in order to type new text?
You will be able to change the names in the menu, but
depending upon your mouse, etc, it can be a little
particular.
Place the cursor at the very beginning of the word
you want to change. Click once .. this should hi-lite
the word. Click again, it should make the word go
blue (or in a blue box) then you can delete and
re-type.
Be sure to save the proj
I have found that even after saving and successfully
burning the project, if I return to it later the
changes seem to have gone away ... so if you go back
to it later, just double check that everything is
kosher

How do delete photos from iphone after import to new photos app?

With iphoto (or aperture which I own), after importing photos I was always asked if I wanted to remove the photos's from my phone. With the new photo's app I don't get that option, and I certainly don't want to delete 1200 photos by having to individually select each one on the phone. Any ideas?

You should ask on the forum that Apple told you to use for Beta software discussions. This isn't the place. The moderators will likely soon remove your post.

Spoken work files will not play even after importing/converting?

I have some audio files recorded on my Android phone with the basic recording app and the files play when I press the spacebar to preview them in Mavericks. However, after importing them into iTunes using various import settings, including the podcast spoken word ones, they just will not play. When I double click on the file it looks like it is about to play, the apple icon at the top switches to what looks like a progress bar, though it is different from other tracks that do play, and then it immediately switches back to the apple icon and does not play.
Any ideas of anything I can do?
Thanks.

I've found an issue with movies when the audio is IMA format. Is that the format of your audio?

Could not able to see my customized BP after Importing

Hi
I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
I did not deleted the Standard BP from PCD/Migrated Content
After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
I could not able to see the Customized BP in PCD.. , Whether that Standard BP should be deleted before Importing
What is the Default location it stores after importing?
Plz help me to solve this issue its very urgent.
Regards

Hi Sanjay,
There is no need to delete the Standard BP from PCD/Migrated Content.
After customizing the business package and storing the content in your own folder, you have to add all objects to new transport package(by right clicking on main folder)then export it and download the epa to your local system.
After importing the epa in some other portal, BP will sit under same path you have specified while creating business package(PCD).In sense, it will create the same PCD structure when you import epa in some other portal.
You might have done some mistake while creating transport package and exporting it to your local system. You might not have added all object to new transport package.
Hope this is of some help. Do write back in case you need further clarification
Cheers
Ruchi.

.AVI glitches after import

Similar Messages

Maybe you are looking for