AVI not playing in Premiere timeline, but exporting ok.

I've imported an .avi into Premiere and I cannot get it to play in the timeline. The scrub bar moves, but the video doesn't move, so I cannot see what I want to edit. If I export a section of the video, that exports just fine. Not sure if this is a codec, camera or other issue, but we have been using Premiere with a lot of different video and have not run into this problem. Any suggestions?

Yes, that 22KHz mono Audio is odd.
When you Imported this Clip, did you wait for the Conforming of the Audio to compete? There is a little progress bar at the lower-right. With long Clips, or slow machines, this might take a while, so one must be patient.
Everything else looks good to me, as well.
Like Harm, I'm curious as to the source of this footage.
Good luck,
Hunt

Similar Messages

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

Photoshop Edited Video Not Playing In Premiere Pro

Hi All
Apologies if this thread has been repeated elsewhere but I am getting pretty deperate in trying to sorth this problem out.
I am creating a remastered project of my Sister's Wedding video and I want to touch up a few frames in the video usinf Photoshop.
Here are the steps I did:
1) I have created a new Photoshop (PSD) file within Premiere Pro with the same frame size/rate etc.
2) I then import the wedding video into the PSD doucument in photoshop which creates a video layer.
3) I search the frames that require repair and edit using the tools in PS.
4) Then Save the the file in PS.
5) I move back to PPro and Import the PSD file into the project panel. As there was only one video layer, I selected 'all layers'.
6) I move the PSD file to the timeline and press play and the program monitor just shows the last frame I edited in Photoshop even though the sequence is over 90 minutes long! The playhead moves but just a single frame shown on the monitor.
Am I missing something here? I know you can have a Photoshop/Premiere Pro workglow and do all the edits or filtering, transitions necessary and it will automatically update in Premiere Pro, but this simply isn't working as I'd expect.
I am an amateur user of these applications and being partially sighted probably doesn't help either, so any help would be gratefully received.
Thanks in advance
Dave

Hi Dave,
Haven't touched up any video in Photoshop in a couple of years, but the last step is definitely to export as VIDEO from PS, which will be an .MOV file. A .PSD file is not video
EDIT: Just Googled "how to edit video in photoshop", tons of tutorial vids come up right away
Thanks
Jeff

Flip Video and .avi not playing clean in FCP

Customer gave me 10 flip videos which I imported - they cam in as .avi files. When I play them in Quicktime they are smooth. When I play them in FCP 7 there is some pixelation and jumping around (not playing smooth). I did create the .avi file as a .mov files using Quicktime and reimported into FCP. The new .mov file still plays the same with all the pixelation.
Read some threads but I'm still a little confused as to what steps to take next.
Bottom line - I want the .avi file to play smoothly within FCP
What am I missing - thanks for your help!
Shelley

I opened the .AVI file within the program. Then in the menu File menu within the program selected export as a Quicktime move. The specifics on the next screen I kept as default accept I increased the Quality to 100%. The default compressor was - Apple Motion JPEG A. That seemed to do it without any other tweaking for me.
I hope that helps.
Shelley

Not playing in the timeline on playback

New HD camera. Capturing fine. But not playing the timeline back in the camera. Did the whole refresh A/V devices and view..external video...all frames.
Am I missing something in FCP?
d

YOu are missing nothing. Can't do it.
#25 HDV external Monitor Viewing
Shane's Stock Answer #25 - HDV external Monitor Viewing
To view HDV on an external monitor you are going to need to purchase a capture card, like the ones Decklink or AJA offer. They will both play out HDV in real time. The catch is that you cannot view this on a regular TV or NTSC monitor. Since this is HD, an HD monitor will be needed.
HDV cannot be played out of FCP via Firewire because it's Long GOP structure is too taxing on your processors to spare the system resources needed to drive an external monitor.
The best option you have is the Matrox MXO...$1000.
Shane

ITunes will not play movie on PC but will on AirPlay

Since upddating to the new iTunes software (10.0.1.2) I haven't been able to play back any movies that I have purchased on iTunes on my Windows 7 Pro computer.
I thought that maybe my database was currupt so I created a new libary on the computer and started fresh and downloading my music and my movies that I have previously purchased.
I still cannot play a movie on my Windows 7 Pro PC.
When I click on a movie, it looks like it opens the movie on the screen, the playback controls appear and you can move the timeline and see / move the different chapter names on where the movies is at.
The screen remains black and you do not see the sound.
I tried turning on Airplay and that worked playing the movies from my PC to my Apple TV so that confirms the movie file is okay.
I have tried turning off in QuickTime the Direct3D Accelleration and alos putting Quicktime in Safe Mode(GDI Only) but it still will not play.
Any help would be appreciated. Thank you in advance.

I just tried downloading a previously purchased TV show and it works so maybe its just movies.

My ipod is not playing through my headphones but plays out loud

My ipod is playing music out loud but will not play through

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
Apple Retail Store - Genius Bar

Adobe AIR not playing sound from swf, but Flex-app in browser does. Why?

Hi
Why won't Adobe AIR play the sound in an swf animation I've got? It plays perfectly as an Flex Application in a browser.
This works good (Animation is shown and sound is played):
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:SWFLoader id="testLoader" source="niceview.swf">
</mx:SWFLoader>
</mx:Application>
This does not work: (Animation is shown BUT sound is NOT played):
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="500" height="400">
<mx:SWFLoader id="testLoader" source="niceview.swf">
</mx:SWFLoader>
</mx:WindowedApplication>
I started out loading the swf from the filesystem, which is what I want to accomplish, but in this test the "niceview.swf" is located inside the source folder and therefore sandbox-violations should not be the issue here, right?

A little bump.
I still haven't found any solution to this.

Video will not play on iPhone 3GS but plays on old edge iPhone

I apologize if this has already been answered, I looked several pages deep and did a search and found nothing that helped.
I synched my new iPhone 3GS (version 3.2.1) and added movies but they will not play, only the audio works. I can play them on my computer on iTunes and I can play them on my old iPhone (edge), but not on the new one.
Usually I see a block of green, and sometimes it is just black.
I am able to play YouTube videos in Safari.
I have tried the advance option to convert video to iPod or iPhone and it says it is already in the correct format. I have tried everything I could find in the forum and nothing.
Any ideas?
Thanks in advance

Hi I have the same problem and have found no solution - did you get anywhere it's driving me nuts!

My shuffle will NOT play protected AAC files but will play ripped AAC files

When I download a playlist to my Ipod Shuffle all files appear to transfer OK, but only the regular AAC files (the ones from my CD's) will play (i.e. the protectet AAC files will NOT play). If I create a playlist with only protected AAC files purchased from Itunes, NOTHING will play.
Yes, I've run updater (latest version).
Yes, I've reset to factory defaults.
Yes, I'm using the latest version of Itunes
Yes, These songs play fine on my Windows XP PC.
Yes, I've "deauthorized" and "re-authorized"
Yes, I've deleted all my music files and restored them.
Basically, I've got a MP3 player (Yes, I know I'm actually playing AAC files)
Any Ideas!!! Has anyone seen this before?

Hi,
Check the iPod hardware properties. Make sure that the iPod shuffle is connected to computer.
1. Right-click My Computer and click Manage.
2. Select Device manager.
3. Then select Universal Serial Bus controllers.
4. Right-click USB Mass Storage devices and click Properties.
5. Click the Details tab.
Check for the string of numbers if it is 000a.2700.FFFFFFF then send the iPod shuffle for service. http://depot.info.apple.com/ipodshuffle/
http://docs.info.apple.com/article.html?artnum=302110
or take it back to the place from were you brought and ask for a replacement.

.avi video clip audio not working in premiere pro but play is windows media player

Hi all,
Using .avi video files. They play fine in windows media player. In premiere pro, the video plays fine, but there is no audio. When moved to a sequence, it builds an audio track, but it is silent. Any help is appreciated.

AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

AVI vids not playing on integrated Intel but play on AMD

If i pull the power cord from my new Macbook Pro 15(2011) and Play most of my movie/video files (avi) regardless of quicktime player or VLC it shows a black screen with sound only.
If i put in the power cord and it auto switches to the AMD chip they play perfectly fine...
Anyone else seeing this behaviour? Any solutions or fixes?

can't think of any reason especially, but for whatever encouragement its worth my own MBP is working just fine with 5.1.2 and multiclips

AVI file imports into Premiere Elements but not Premiere Pro CS5.5

I tried to import an avi file into Premiere Pro 5.5, only to get the message: "Unsupported format or damaged file." The weird thing is, I have no problem importing the same file into Premiere Elements 1.0 and Premiere Elements 3.0. From the message boards, I somewhat understand that avi is a container and that there are actually 1000s of different formats within that "avi" label. Anyone know why PE is more capable than Pro on this task? Any solutions?
Geoff.

Well... what is inside that AVI file?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen
shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Not playing video premiere elements 7

I'm starting out with a .AVI file captured on my Nikon D300s. I have premiere elements 7.
When I open the video (before any editing in Premiere) in Windows Media Player, everything is fine - I have audio and video. Same thing when I open in QuickTime - everything is fine.
I opened in premier elements, and the video plays fine. I edit the video, save and go to "Share". I select PC and choose the MPEG option.
The preset is NTSC DVD Standard.
When opening the Advanced option the Export video & Export Audio options are checked. In Mulitplexer I have DVD selected.
When I Save this and then go to open the file in Windows Media Player, the audio plays but no video. When I try to open this in QuickTime I get:
Error - 2048 Couldn't open the file video1.mpg because it is not a file that QuickTime understands
If I save it as a windows media it opens in WMP just fine with audio and video.
Why can't I save this as an MPEG?

I just did a test Share to MPEG, at your settings, and the Quality set to 5. Everything worked perfectly in WMP 11, VLC Player and MediaPlayer Classic HC, and I got the same error in QT Pro 7.5.5, that you did.
Here is my G-Spot screen, with the file in it:
How does G-Spot see your file? If you look to the lower-left, you'll see some squares with numbers. I'd hit the Video Render button #1 "Vid," and look to the right for messages. Then, hit #2, and look for messages. If no messages, hit #3 to play in G-Spot's little player.
Good luck,
Hunt

Urgent. Issue with converted .mov files to avi not working in Premiere.

I am trying to import video files that I have converted from .mov to .avi through OjoSoft Total Video Converter and anytime I try to put a file into the work area, the video goes to Video 1, and Audio goes to Audio 4. When I try to play it I get no audio, and the video jumps from frame 1 to frame 2.
Does anyone know a good converter or know the best way to convert and what filetypes to do so? They work converting them as MP4 video files, but I like avi's better.
I have tried converting the .mov to mpeg4 and H.264 (Both with audio as MP3). They will play in Windows Media Player after convert but not in premiere...
I am running Premiere CS4 on Windows7 with no direct codec packs installed. I opened a video/audio file that I worked on before with no issues...video/audio run flawlessly in Premiere.
Please help!

What are the codecs in the original MOV files and what are the codecs after conversion? Use GSpot to identify them.

AVI not playing in Premiere timeline, but exporting ok.

Similar Messages

Maybe you are looking for