Avi plays in Windows Live Movie Maker but probs in Quicktime and Premiere Pro
Hello,
I'm completely new to Premiere Pro and am trying to edit a recording of a webinar for work. I have it in both .avi and .wmv formats but can't import either into Adobe Premiere Pro CS6 or CS5.5. They both play in Windows Media Centre, Windows Live Movie Maker and Windows Media Player, but the audio is corrupted and no images appear when I play in Quicktime with the avi and when I try to play the wmv in Quicktime it says the file is not in a format that Quicktime understands. When I try to import either into Premiere Pro I get the error message "Unsupport format or Damaged File". I've used Gspot to determine that the codecs I need are installed and am at a loss in terms of what to do next. I've spent literally hours on this and would dearly love some help. Can anybody shed light on my problem? With many thanks in advance. Shan
Hi Jim,
It said 0x0055 MPEG-1 Layer 3, 44100Hz 128 kb/s tot , Stereo for the audio
and H264, H.264/MPEG-4 AVC for the video.
Thanks for looking at this for me.
Similar Messages
-
Mini-DV Capture to Windows Live Movie Maker
I captured video from my mini-dv cam (GL2) in FCP but my editor uses Windows Live Movie Maker. What is the best way to get video captured using Final Cut Pro into a format that Windows Live Movie Maker can work with?
Here are the file formats WLMM supports:
Windows Media Video (WMV) files
.wmv
Windows Media files
.asf and .wm
AVCHD files
.m2ts and .m2t
Apple QuickTime files
.mov and .qt
DV‑AVI files
.avi
Microsoft Recorded TV Show files
.dvr-ms and .wtv
MPEG‑4 movie files
.mp4, .mov,.m4v, .3gp, .3g2, and .k3g
MPEG‑2 movie files
.mpeg, .mpg, .mpe, .m1v, .mp2, .mpv2, .mod, and .vob
MPEG‑1 movie files
.m1v
Motion JPEG files
.avi and .mov
Can Compressor do any of those? Which is the best? What settings should I use in compressor to process 500GB of footage on my MacBook so that it takes only a few hours and produces the highest quality audio/video possible and results in less than 5GB of footage at the end?
I know I will lose quality. My requirements are simply 500GB to 5GB, best quality possible, WLMM compatible, process time in compressor on a MBP < 6 hours. Please tell me the suggested settings. Thank You. -
Can I export to Windows Media 1080p with same quality as Windows Live Movie Maker?
I am looking to replace Windows Live Movie Maker, because of the following:
it keeps crashing
it has occasional problems with audio sync when I use MTS source files
it has very limited editing features (especially inability to increase audio levels for a clip)
However, I would like to still render to 1080p Windows Media files for archiving. Does anyone know if there are settings I could use in Premiere to export to 1080p and get equivalent quality to WLMM? I have failed to find a combination of settings in Premiere that doesn't mess up the video with horizontal lines during motion. Here is an example:
When I use the 1080p export setting in WLMM, the video comes out looking essentially the same as the original MTS files, like in this snapshot:
However, I have failed to find any settings in Premiere Elements that will give an equivalent result. Below is a snapshot from the Windows Media file I exported from Premiere:
And these are the settings I used:
My Equipment:
Canon Vixia HF200
Windows 7 x64
AMD Phenom II x4 945 3Ghz
4GB RAM
300GB 10K RPM HDD
ATI Radeon 4800 Series
Premiere Elements 8 trial
Thanks,
-RobynHi Steve,
Thanks for the response. I did go back and verify the project setting, and I think I was originally using the wrong project settings. This is what I'm using now for the project:
And then to share, I went to Personal Computer -> WMV, and selected these advanced settings:
Unfortunately, I still see the jagged horizontal lines like the original screenshot I posted. I tried playing with other video export settings (constant bit rate, at 8,000 and 20,000 also), and with variable constrained/unconstrained output. I'm really at a loss for what is going on. I did confirm that it doesn't have the horizontal lines if I encode to MPEG, but the WMV problem persists. -
PE 8 crashes when opening project after loading Windows Live/Movie Maker
Have a new HP computer with Windows 7 and plenty of RAM/ROM. Loaded all the updates for Windows, PE 8.01, ATI, etc. but still crashed when I open a project. It worked fine for the first 2 weeks, then I loaded Windows Live/Movie Maker and now PE 8 is unhappy. Seems like lots of crashing issues but can't find this particular one. Reload PE 8? Remove Windows Live/Movie Maker? Thanks if you have some help.
The only thing I can think of is that Windows LIVE/Movie Maker is runnin
g like messenger and Office LIVE and that would be disturbing for
PE8... You can enter the pro
ccesses with ctrl-alt-del and kill the Movie Maker proccess manually (in the handler) in that case and you would not need to uninstall it but repeat killing the proccess every time for PE8.
Otherwise uninstalling LIVE Movie Maker should be fixing it if I take a guess, and I wonder doesn't you have Windows Movie Maker in the computer from start, why would you need/want Windows LIVE Movie Maker (at least my Vista has Movie Maker preinstalled)? -
Anyone tried to ZAV Windows Live Movie Maker?
Have found this useful on how to just install Movie Maker:
AppDeploy > Package Knowledgebase > Windows Live Essential 2011
Any advice.
Thanks
Markmarklw,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Export from Windows Live Movie Maker to iTunes
Anyone know an easy way to convert videos created in Windows Live Movie Maker to an iTunes compatible format?
Hi frostytosh,
I agree with MisterX. This can be done with Windows Movie Maker and its not very tricky. Just have a look on this Youtube tutorial video.
Also check the Windows Live page about Movie Maker with interesting article about the different features:
http://explore.live.com/windows-live-movie-maker -
How to stop audio from sputtering on Windows Live Movie Maker
I hope that I'm asking this in the right place. If not, if someone could direct me to the right place it would be greatly appreciated.
The video and audio in some of my videos are sputtering and spitting even though the sound is correct when I listen to them directly on the computer (not in MM.) If I split and delete all but a few seconds (:15 or so) off of the original video
it's "almost" okay in MM, but the longer the video, the bigger the problem. (More sputtering, longer pauses, video freezes but audio is fine, the whole thing is slow, etc...)
I have a combination of clips from an android (MP4) and iPhone (MOV) files that I am editing together.
I am using Windows 7 Professional and installed Movie Maker a few weeks ago. I can't tell which version I have, but assume it's the latest since I just downloaded it.
I've tried the FixIt link from some other suggestions in posts about the same problem, but it says there's nothing to fix. I don't understand what codec is.
Is there something simple I can do to smooth out the sound, or should I just use YouTube for the editing? (I plan to put this up on YouTube anyway.)
Thank you in advance for a speedy reply. (I originally asked this on August 22 in the Microsoft Community forums, but it FOREVER to get a reply from the moderator. He was giving good instructions, but I can't wait 48 hours to get a reply to a
question I have about his instructions.)Hi,
As the issue is specific with Movie Maker , you may contact Microsoft Movie Maker Forum
for further assistance on the issue:
Contact -Microsoft Movie Maker Forum:
http://www.windowsmoviemakers.net/Forums/ShowForum.aspx?ForumID=2
Please revert for any clarification on this or any Windows issue. We will be glad to help you.
Roger Lu
TechNet Community Support -
Windows Live Movie Maker will not work
After downloadng Windows Essentials and the WMM I received this error message
Windows cannot access the specified device path or file.
You may not have the approprate permissons to access
the item
Tried downloading again as administrator with no success.Hi,
I agree with
arnavsharma to run the WMM as administrator to see the results.
Also, I suggest you use Process monitor to capture the events when you repro this issue.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
If you find any file or registry key with access denied error, try following guide to fix it:
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
You can also upload the saved process file into file service like Onedrive and share the link here for our research.
Kate Li
TechNet Community Support -
Class not registered -- Window Live Movie Maker
If I attempt to launch a message of "Class not registered" is displayed. What could be a solution?
Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many similar scenarios. If the issue still persists, please feel free
to reply this post directly so we will be notified to follow it up. You can also choose to unmark the answer as you wish.
BTW, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Juke Chou
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedbackhere.
Juke Chou
TechNet Community Support -
Transfer Windows Live Movie to ITunes.
I have created a movie using Microsoft Live Movie Maker which has been saved on my PC as a (*wmv) file. When I try to copy to ITunes is comes up with a barred sign. As far as I can see the file is not protected.
iTunes supports only mov, m4v and mp4 formats. You need to get a third party software to convert.
-
hello
I just buy a iphone 5C of opportunity for united state (I live in France), but iCloud is block and I don t have the coordinates of the former owner.
how can I do?The iPhone is Activation Locked. Without the AppleID and password of the original owner the iPhone is useless. Ask for a refund.
-
iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen
Did anything happen to prior to your phone acting this way? It sounds like your screen is dead, but it is hard to say without knowing what what the cause.
1) was this a gradual problem? Did the phone screen start dimming a couple months ago and now has degraded or after some event (known or unknown to you), the phone started behaving this way.
2) Can you give more specifics on the problem? You said you have a black screen, but also you can see what you're doing on screen. Is the screen just really dim? Is the screen completely black? Does anything else besides attempting to reset the device cause it to flash white? -
Can you use Windows Live Mail to send/recieve iCloud email and share contacts or can I just use iCloud email on my PC without use Live Mail? I want to use one email adress, one contact list and one calendar. I want to be able to have access to all this on my iphone and pc.
You can only use Mail, contacts and calendars will not work, for that you need Outlook.
-
Can anyone tell me if i can make a virtual car accident in premiere pro cc
Can anyone tell me if I can make a virtual car accident, in premiere pro cc
You could do the reverse trick.. Start with two cars directed at each other and back up quickly. Then reverse the footage to make it look like they are coming at each other. Add some effects in After Effects and you could probably make a believable scene.
Here's a short I made back in school that uses this - The Camera on Vimeo It's towards the end. I'm not sure if this is what you are looking for but that's one approach.
-Tim -
Firefox is my default browser and since the most recent Firefox update I have been unable to click through links I receive from Windows Live Email to the Firefox browser, but it works if my browser is set to IE9?? I have checked the defaults settings and both are fine, so Any explanations or ideas on how to solve this?
Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
Run the Network Diagnostics assistant.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 7
Reset the System Management Controller (SMC).
Maybe you are looking for
-
Memory trouble on Mac Pro 2009
Problem description: i have 24 GB of ram but the machine constantly loads up on inactive memory. leaving me with very little free memory. i was thinking of upgrading to latest OS but unsure since i noticed this issue. Below is the info I got from run
-
Reg: How to Configure internet for solaris 10 in x86 32 bit
Hi, I am new to Sun Solaris can any one help me detailed step of how to configure internet for standalone pc. Thanks in Advance Thanx MA
-
Error with Render Multiple Frames
I have this problem before and the only solution I had was to reinstall the WHOLE system and it was fixed that way (but manually install Adobe CC). The problem is the next: After Effects doesn't render anything if I have "Render Multiple Frames Simul
-
Can't figure out how to center text in text box
I've made a text box over a line. How can I center the text in the text box? Please advise. Thanks
-
E-Mail notification issue with date
Hi All, i am facing following email notification issue, could please clarify. E-mail notification that was sent to employee this morning, March 17, 2009, but actually the email is dated February 3rd and refers to the January timecard, but she receive