AVI shows all green when played

Hello,
So I'm a user of quicktime pro and Toast 7 (w/divx codec for QT) and I've recently aquired an AVI file of a tv show I like but I can't seem to watch it. Everytime I do try in both QT and DivX players the screen shows all green and is real short (about 10 seconds). When I get the info on the file it shows as the right size for the full file and everything. I know this isn't too directly related to QT only but any help will do. I don't think the AVI file is bad.
iBook G4 Mac OS X (10.3.9)

And what if the files can be played with VLC and not with QuickTime? VLC says they are in XVID format.
QuickTime does not natively handle XVID. You need a third-party codec to handle that format. Unless you absolutely need to play XVID movies with QT for some reason, I'd suggest you just stick with VLC Media Player. If you need to use QuickTime for some reason, though, there is a project developing an XVID codec for QuickTime here; I don't know how well it works.

Similar Messages

TS3276 Web through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro, but no my iMac. Connection Doctor shows all green lights.

Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

Recently I purchased a tv show on iTunes when playing it through apple TV it constantly renders while playing

Recently I purchased a tv show on iTunes, when playing it through apple TV it constantly renders while playing on the Samsung tv which takes forever too watch.
Hope someone can advise if I am doing something wrong.
My laptop is directly under the tv however my modum is in another room so it is operating through Wifi.
Thank you

Restart all devices and the router to see if it helps. May or may not.
If you Purchased in iTunes on the laptop ensure you are playing back on AppleTV via the Computers icon not under the main TV Shows icon which will reload from the web.
I would move the laptop away from the TV in case it's causing interference to teh wifi though clearly an AppleTv might have the same issue but is designed to sit next to the TV.
If you were playing via Computers and it's still slow you could connect an ethernet cable between AppleTv and laptop, keep wifi on the laptop for internet via the router, and enable intrenet sharing over ethernet in System Preferences > Sharing so AppleTV can do an internet authorisation. Hopefully restarting iTunes/router will just do the trick though.
Do you have any non-Apple security software eg NetBarrier, if so try disabling to see if it was detecting AppleTV as an intrusion threat due to multiple connection attempts.

Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

TS3276 I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights.

I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

I don't see "Show all Bookmarks" when I attempt to organize my bookmarks.

The first step to organizing bookmarks is: Click the Bookmarks button and select Show All Bookmarks to open the Library window. I don't see "Show all Bookmarks" when I attempt to organize my bookmarks. My desired end result would be folders followed by individual bookmarks.

@Cuddlebug27
You clearly won't be able to import from something that no longer exists.
Do you perhaps have two computers? If you had Chrome on both and signed in to synchronize them at some point, then you could get your info over from the second device. Otherwise you really can't import from a browser that isn't there.
Also if you usually ran Chrome signed in with an email account, you could try downloading it again and see if your info comes back when you '''Sign in to Chrome''' with that account.

Why does my airport base station show all green lights but doesn't connect to the internet?

I have an Airport Express Base Station that has been working beautifully up until this morning. For no apparent reason (changes in ANYTHING), I cannot connect to the internet through it. Here's the situation:
The light on the airport is solid green.
Aiport Utility shows all is well...the base station shows up, with green light, IP address, etc.
Network Diagnostics shows "your connection to the internet seems to be working correctly."
Connecting the modem directly to the computer via ethernet cable works fine...internet humming right along.
Connecting the modem to the base station doesn't work, even though all green lights and "all systems go" diagnostics.
Wireless access via iPhone and iPad not working, either, so definitely not computer-based issue.
No changes have been made to anything. I'm running 10.6.8 on a 2007 MacBook Pro.
Can anyone help?
Thanks,
Nancy

Hi Bob,
Thanks for responding.
Does that IP address start with 169, or something else?
The IP address starts with 10.0...
Does this mean that the iPhone and iPad can connect to the wireless network....but not get to the Internet?.....or.....does this mean that the iPhone and iPad cannot connect to the wireless network at all?
They can see and connect to the wireless network, but aren't connecting to the internet, just like my computer. Sorry for not being clear about that.
Can you look on the side of the AirPort Express to locate the model number? Hard to see, you may need a magnifying glass. Starts with an "A" followed by four numbers, as in A1264, or A1084, for example.
The model number on the Airport is A1392.
Any insights based on this info? Thanks for your help.
Nancy

How to show all regions when opening piano roll?

hey,
I want to be able to see all events in all regions when opening (not toggling!) a piano roll. I just switched from version 5 (yes, 5) to 9. It used to be like this: you deselect all regions and then just open the matrix editor (that's how the piano roll was called in ancient times).
If I do this in 9, the piano roll shows nothing. If I select all regions and open the PR, it shows only one. If I select one region, open the PR and then go back to the arrange window and select all regions it does show all info in the PR but this is a bit of a not-very-efficient work around.
Anyone any idea?
grtz
Janco

double click a region, then highlight the ARRANGE window and type command + a. It is essential to choose all regions this way not as you mentioned by choosing all by hand. Remember that when you doubleclick a region Logic highlights the PIANOROLL. So you have to highlight the arrange window by clicking on the bar just below the main tools or in other words, just above the ruler (I don't know the exaqct word for it but I hope you know what I mean.
Message was edited by: samplaire
Message was edited by: samplaire

How to show all data when using more than one parameter?

Hi All,
I used a query like this to show the data in a report:
select col1, col2 // col1 and col2 are columns of tabale tab1
from tab1
where
tab1.col1 =
(case when :P_COL1 IS NOT NULL then // :P_COL1 IS A USER PARAMETER TO EQUAL COL1
:P_COL1 ELSE tab1.col1
end)
AND TAB1.COL3 =
(case when :P_COL3 IS NOT NULL then // :P_COL3 IS A USER PARAMETER TO EQUAL COL3
:P_COL3 ELSE tab1.col3
end)
The problem is when I run the report with paramters values or not, It shows the data which is not null for both col1 and col3.
That is when the value of col1 or col3 is null the report would not return that record!
I want the report to show all data not only values which is not null!
How to do this?

Rainer,
That where clause will fail when col1 in the table is null and the parameter has the dummy value. Consider the following:
variable p_col1 varchar2
exec :p_col1 := 'yourdummyvalue';
select
from
     select 'yourdummyvalue' col1 from dual
     union all
     select 'other' from dual
     union all
     select null from dual
     union all
     select 'X' from dual
) tab1
where nvl(tab1.col1,'yourdummyvalue') = nvl(nvl(:p_col1,tab1.col1),'yourdummyvalue')In this case, the query returns the row with null and the row with 'yourdummyvalue', where only the row with 'yourdummyvalue' should be returned.
You must do something like this:
where ( :p_col1 is null or ( :p_col1 = tab1.col1 ) )That one is the simplest and does not need a dummy value. Here are some other more complicated examples:
where nvl( :p_col1, 'yourdummyvalue' ) = decode( :p_col1, null, 'yourdummyvalue', tab1.col1 )or this:
where nvl( :p_col1, 'yourdummyvalue' ) = nvl2( :p_col1, tab1.col1, 'yourdummyvalue' )In the last 2 cases, it will not matter if the dummy value exists in the data, but they are unnecessarily complex.
Kurz

Show All Option when Exporting Flash

I've made my project and build a flash file out of it. I was wondering if there is an option in Encore to have the "Show All" option selected as default when viewing the project in Flash Player. I didn't know if it was something simple that I'm missing or if I have to find somone who knows how to actually use Flash to do it, but just looking to choose the "Show All" option instead of the "100%" option when viewing in Flash Player. Thanks.

I don't do flash, but what does it say in the user guide?
CS5 User Guide - Right click PDF link to save to your computer
http://help.adobe.com/en_US/PremierePro/CS5/Using/index.html
http://help.adobe.com/en_US/Encore/CS5/Using/index.html

IPhone doesn't show all music when I connect to network in iTunes

Hi
In iTunes Preferences on my Mac I've ticked the button to make all my music available over the network.
When I use the Share option in iTunes on my iPhone it doesn't show all the music on my Mac. Is there something else I should set to make this work?
Thanks
Flybridge

PUSH

Why does my screen show all windows when mouse moves

When moving the mouse my display shifts to showing all open windows. Why is this happening all of a sudden?
Have checked Disk Warrior and restarted, but it keeps doing this!

What should be in each spot??
Whatever you use the most. As an example I'm right handed to I set the button on the right to Seconday Button so I can take advantage of the menus available for going back a page, reloading a page, etc., when right clicking.
I use the left button to switch between Applications.
It's just a matter of what works best for you

K9N2 SLI Platinum shows all green, but no video output

Ok, here goes - I hope you guys can help me...
I built a new setup last night, using the following components:
AMD Phenom 9850 Black Edition 2.5 Ghz Socket AM2+ 125W Quad-Core
K9N2 SLI Platinum
OCZ Reaper HPC 240-Pin DDR2 SDRAM DDR2 1066 (2 x 2GB)
eVGA GeForce 9800 GTX (G92) 512MB 256-bit GDDR3 PCI-Express 2.0 x16 HDCP Ready
Seagate IDE Hard Drive 120GB (not sure of model)
Windows XP Home Edition SP2 installed
Antec Earthwatts 650 - voltages follow:
Min Max
+5V 0.2A 25.0A ±5％
+12V1 0.5A 22.0A ±5％
+12V2 0.5A 22.0A ±5％
+12V3 0.5A 25.0A ±5％
-12V 0 A 0.5A ±10％
+5VSB 0 A 2.5A ±5％
+3.3V 0.1A 25.0A ±5％
I build the board, mount all components, then power on - board LEDs cycle through pattern, then land on all green. There is no video output at all during this process. I tried the PCI-E card, the onboard DVI, the onboard DVI without the video card installed.
During boot, I hear a beep that may be a long (sounds like a faint "power on" beep), and then two fainter beeps in quick succession. They don't seem to be in connection with one another.
During the boot, there is also little to no activity from the hard drive. The board reaches all green, then I hear the CPU fan spin faster, and the hard drive activates, then the board flashes to all red, and the reboot sequence begins again.
I've tried removing memory, seating just one stick, and swapping out for a second stick. The fact that the board reaches all green makes me think that everything is seated properly and functioning, but the fact that there is no video output (hence no way to access BIOS) is obviously troubling, plus the incapability of booting.
Questions - the 8-pin ATX power connection had a cover over four of the eight pins - why is that there? I connected an eight pin to the connector, should I have left the cover in place and just used a four?
I realize that using an older hard drive from a previous build is not the best idea, but I'm hoping it shouldn't be a factor this early in the boot process.
I have not flashed the CMOS yet - would that have any effect on the boot process? Again, getting to all green is promising, but the subsequent return to all red is... not.
I've looked through the forum as best I could, but didn't see any issue where the board got to all green, and then backtracked when starting up.
Any help you guys can provide would be greatly appreciated...

Hello!
Don't worry about the hard disk for now. You will need a new installation of Windows, but that would be next step.
9850 needs the latest BIOS version. http://global.msi.com.tw/index.php?func=prodcpu2&prod_no=1443&maincat_no=1
Use the MSI forum tool. https://forum-en.msi.com/index.php?topic=116721.0 Impossible of course! Ask the store to update BIOS for you, or find an earlier, simpler compatible processor friend.
The single beep is a power-good signal. The two fainter ones are probably USB things attached.

Mail Group shows all members when preferences is checked

Hello
MacBook air Yosemite 10.10.2 Mail 8.2
In preferences when I UNcheck the box "When sending to a group, show all member address"
the compose window display the group correctly but when I send it shows all the member address in my send folder as well as the recipient ???
thanks for your help

Try using the BCC field as a workaround.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Mail Feedback

AVI shows all green when played

Similar Messages

Maybe you are looking for