AVI Thumbnails Always White in Bridge CS5 on XP - how to fix?

All AVI thumbnails are showing up as white on XP - any idea what might cause this and how it can be fixed? Other formats e.g. MOV show up properly e.g. showing thumbnail as a frame from the movie.
Thanks
Richard

Video thumbnails may or maynot show depending on the extension. Some AVI work and others don't. It all depends on the codec required. There have been many complaints about this and it is hoped that Adobe will continue to work on the problem.
My only workaround is to do a frame grab and save as jepg. Then use stacks to have the jpeg as the "cover" picture.

Similar Messages

I have a canon MP610 printer and it is always offline and i don't know how to fix it. I have a mac lion.

I have canon mp610 printer connected to my mac lion pc...It is always offline and i don't know how to fix this problem.

Does File > Work Offline has a check mark when that happens?
You can try to create a new Boolean pref with the name network.manage-offline-status and set the value to false.<br />
Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean pref.
Name: network.manage-offline-status
Value: false
See also http://kb.mozillazine.org/about%3Aconfig

I had greyed out wifi, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

i had greyed out wifi on my iphone 4s, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

HT201263 my ipod has a white screen and i dont know how to fix it!

After extensive googling with no sucess, I am at my wits end. My iPod touch 4th gen is displaying nothing but a white screen. I tried sliding to open and I could hear the locking clicky noise that most often accompanies it. I have factory restored it but that still left the white screen. I have also tried the simply "turning it on and back off", in which still doesnt work and I dont even see the apple logo. Help Please!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT1338 My phone is not updating I have enough meme pry but when it starts to update it always says error can anyone tell me how to fix that problem

some one help me

If you are trying to update to IOS 7, it appears Apple's download servers are 'overwhelmed' today. I couldn't download the newest iTunes update or IOS 7 and there are a lot of discussions today about not being able to download.

Since updating to 5.1, my phone will not turn off or on. Black screen with white apple icon. Any idea how to fix?

I don't know if I have a 4 or 4s.

The latest version is 5.1.1. If you are trying to update to 5.1 that is your problem; it can't be done.
As your phone is "stuck" follow the steps here: http://support.apple.com/kb/HT1808
It doesn't matter if you have a 4 or 4S, but you can easily check by entering its serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do

Nikon Df Nef File Thumbnails not showing in Adobe Bridge CS5

HI,
I am having trouble getting NEF thumbnail to show in Bridge CS5, but only from the Nikon Df. All other, older, NEF files are showing up without a problem
I have installed the latest updates (Camera Raw etc)
I would appreciate any advice on getting this to happen.
Thanks
BD

Ok thanks for that, at least I wont be chasing my tail.
I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

How can I uninstall Bridge CS5 after purchasing Bridge CS6

Hi,
I have downloaded photoshop CS5 trial. It came with Bridge CS5.1. Now, I have subscribed to Adobe Cloud with Photoshop and bridge CS6. But I still have Bridge CS5.1. How can I uninstall it please ?

You need to uninstall PS CS5.1 and then reinstall CS6 to fix file associations.
Mylenium

Adobe Bridge CS5 Thumbnail

We are using Adobe Bridge CS5. How do you display the lens used to take the photo (70-200mm, 17-40mm, 400mm, 24-120mm, etc.) on thumbnail before editing?

In Basic there is still a lot to wish for in Bridge but in all honesty since CS4 Adobe has not shown much interest in developing it further and adding new features many wished for.
You can always add your wish for new features using the Photoshop family .com page, the more that wish the better chance it eventually get realized, but beware, don't hold your breath…
That said, while it seems logic in your workflow it is also a fact that not all lenses are capable of producing the needed metadata, nor is it standardized info

Bridge CS5 - weird goings on with thumbnails...

Hi, I'm using Bridge CS5 and raw images from a Minolta Dynax 7D.
Initially I thought the problem was just that thumbnails weren't being updated after an edit in Camera Raw, but its a bit more complicated than that.
If I view my thumbnails through folders (explorer type view), CR changes are seen immediately in Bridge (as I would expect!).
If I view my thumbnails through a saved collection, CR changes are not seen in the thumbnail unless I then make some other change with Bridge - give/change a label or star rating for example - or switch to Folder View - or choose Clear Cache for Selection from the pop-up menu. Not only are the thumbnails not updated, if it was a first time CR edit, the icons above the thumbnail that show a CR change are not displayed either until one of the above is done.
This is so weird, please don't tell me this is by design!
I have Camera Raw version 6.3.0.79; thumbnail options are set to Always High Quality.
Thanks in advance for any help.

function(){return A.apply(null,[this].concat($A(arguments)))}
Curt Y wrote:
To keep you cache in good working order I recommend you compact the cache occasionally to get rid of the junk.
Thanks for your repsonse Curt Y, sadly it doesn't solve the problem.
I've played around with various cache settings in CR and BR and although purging it does force the thumbnails to be re-drawn in any view, subsequent changes when viewing through a Collection aren't shown. Compacting the cache appears to do nothing.

Bridge CS5 - creating thumbnails takes forever

I aleady read about Bridge CS5 being extremely slow. Yes, on my system it sometimes is slow, too. Sometimes it takes AGES to start up (not always), and the most annoying part is, it also takes AGES to create thumbnail previews even of a handful of JPEGs. (about 20 Seconds for 5 JPGs at about 2700x2200 size, 1MB each). Not to mention that CS4 Bridge was much, much faster (speed wasn't an issue at all).
The interesting part: There is neither much disk activity nor CPU activity. So WHAT is Bridge waiting for?! It's just sitting there doing nothing and the little wheel on the lower left corner keeps on spinning.
This is mind boggling.
So there isn't any process "stealing" all the time, it's seems like Bridge is waiting for some kind of event or something.
When I click forth and back through the folders, sometimes the thumbnails appear faster (seems like re-selecting the folder triggers something)
Is there anything that can be done about that? I mean, I have TONS of images to browse through, but "browsing" is almost impossible this way.

Ninarama wrote:
I aleady read about Bridge CS5 being extremely slow. Yes, on my system it sometimes is slow, too. Sometimes it takes AGES to start up (not always), and the most annoying part is, it also takes AGES to create thumbnail previews even of a handful of JPEGs. (about 20 Seconds for 5 JPGs at about 2700x2200 size, 1MB each). Not to mention that CS4 Bridge was much, much faster (speed wasn't an issue at all).
The interesting part: There is neither much disk activity nor CPU activity. So WHAT is Bridge waiting for?! It's just sitting there doing nothing and the little wheel on the lower left corner keeps on spinning.
This is mind boggling.
So there isn't any process "stealing" all the time, it's seems like Bridge is waiting for some kind of event or something.
When I click forth and back through the folders, sometimes the thumbnails appear faster (seems like re-selecting the folder triggers something)
Bridge isn't THAT slow. There's something wrong with your PC.
First, some basic questions: what generation processor has it got, and how much RAM is installed? How much free disk space do you have on each volume? Have you got up-to-date drivers and Windows updates? What do you use for anti-virus, and is it current?
If it's just sitting there with no disk activity, how do you know there's no CPU activity? How technical are you? If you're a bit techy, you could check resources with Task Manager, and try watching Bridge with Sysinternals' Process Monitor.
When you revisit folders in Bridge, it will use its own image cache, so it should be faster.

60D images not showing a thumbnail view in Bridge CS5..ideas?

I am having trouble seeing images in raw format from a 60D Canon in Bridge CS5. I have an iMac using OS X 10.9.4..any ideas why I can only see the white file, but can see all images in raw from 5D, 7D, 40D...etc. No updates show up as available on my computer or on the Adobe site. I just can't figure it out!
Thanks for your help.
-Alli

Make sure your ACR (Adobe camera Raw) plug-in is fully updated. That camera model has been supported since Adobe Camera Raw 6.2.
DO NOT rely on the Adobe auto updater to tell you that there are no updates available. It's totally unreliable in CS5 and earlier versions. The Adobe updater team overseas did not get their act together even halfway right until CS6.
Go into the About Plugin > Camera Raw… menu item in Photoshop to see what version of ACR you have. In CS5, ACR should be at version 6.7, more precisely at 6.7.1.
If you are already updated to ACR 6.2 or higher, then go to the Tools menu in Bridge and Purge Cache for the offending folder(s).

White Balance NOT Synchronizing in Bridge CS5

Instead of LR3 I use Bridge CS5 and the camera raw tool for my edits (it's all the same tools and runs faster.) ANyways, a strange problem i noticed recently after SEVERAL job edits.. I noticed the white balance was not the same on all my files. THIS IS A HUGE *** PROBLEM FOR ME! I tried everything but for some reason Bridge is not synchronizing the white balance, even if I just have white balance selected.. I need to have all my files the same.. I doesn NOT work in the camera raw module and it does NOT work when you right click, go to settings, copy settings and then paste settings..
Any one else experienced this?
I have ACR 6.1 installed

Is the WB As Shot, perhaps? Synchronizing As Shot as your WB does exactly that, sets the WB to whatever the camera was set to, which if it is Auto WB in the camera, then the Temp/Tint values will be different for each photo. If you want all the WB settings to be the same Temp/Tint values you must change the WB to Custom or use one of the built-in WB selections that has a constant set of Temp/Tint numbers.
What I usually do is modify the As Shot WB to something slightly different by changing the Tint value and then set the Tint value back to what it was if necessary, which will make it say Custom instead of As Shot, and then synchronize with this Custom value.

No thumbnails for some .mov files Bridge CS5

I'm using Bridge CS5 to organise some video which has been digitised from a sony camera in File Maker Pro X. My operating system is Mac OS X. I have Quicktime player 10.1 and have just checked for updates.
Some of my .mov files show thumbnails which can be watched in Bridge. Other folders just show the thumbnails as black rectangles - these can be watched in a pop up window but not directly in the Bridge preview panel.
The files were all digitised in the same way and recorded on the same camera so should be the same format.
After looking at discussions on here I have tried updating QuickTime and clearing the cache but no dice.
Any suggestions?
Thanks,
Claire

That is odd that if it was recorded on same camera they are different. I do know that the thumbnail is a complex issue. A little foggy on this as it has been awhile, but if you get a black thumb it is the way the marker of the first frame is recorded. In some cases this shows a black frame. Hope this gives you some clue to do a web search for the real answer.

Can't view Powerpoint 2007 thumbnails in Bridge CS5 (Win 7)

I can view 2003 (win) files (saved from Powerpoint 2007) as thumnails in Bridge, but thumbs for 2007 files (*.pptx) are not generated.
Any ideas?
Windows 7
Bridge CS5.5 (4.1.0.54)

I have seen screenshots with PPTX thumbnails visible. I believe these Bridge thumbnails appear on WinXP installs so I'm thinking there is a Win7 aspect to this...
Using a Mac with CS6 I tried a pps, ppt and a pptx file and all of them only show as Powerpoint icon and none have a thumbnail with preview of the content.
Also tried it with Apple Keynote, the Mac PP equivalent and here I checked the option to include a preview of the file but same result, just an icon of Keynote application.
Looking at the file type associations their is neither support for Powerpoint not Keynote so it does not seem possible.
The screenshot from your memory is probably manipulated or you suffer from good memory like we all seem to do every now and then...

AVI Thumbnails Always White in Bridge CS5 on XP - how to fix?

Similar Messages

Maybe you are looking for