.avi to dvd using QT pro??

I know it is possible to convert an .avi file to dvd using quicktime pro, but I can’t remember what you convert it to?? I want to take a bunch of .avi files and put them on a dvd I can watch in my home player.

QuickTime Pro doesn't export to the MPEG-2 format so it doesn't make DVD's
Your profile says you're using a Mac.
Export your .avi to DV Stream (.dv) format (make sure you can play them with QT first).
Use iDVD to burn your DVD. It will convert your .dv file into the MPEG-2 format used on DVD's.
If you don't have a built in DVD burner you may be able to use a Firewire external. Check before you buy to be sure it is compatible with iDVD software.

Similar Messages

  • AVI to DVD using iDVD cuts off sides of the movie

    I have various avi movies and while trying to burn them to DVD using iDVD I have been experiencing the following problem: The left, right, top and bottom of the movie are cut off (imagine putting two layers of duct tape on you screen making your screen smaller and then watching a movie on it).
    I have a widescreen TV and have tried both the widescreen and standard format with little success. The only difference in on the standard version I can see the entire menu (in the wide screen version, oddly enough, the screen is cut off).
    Is there something on iDVD I can do to adjust the ratio to shrink the movie to fit the screen, or do I have to format the movie somehow before bringing it into iDVD.
    I appreciate any advice or help anyone can offer.

    The problem with that is the green screen I get if I add it to the slide show.
    That's the first time I've heard of that. Thanks for the feedback. There's are two possible workarounds if you want to try them:
    1 - open the movie in Quicktime Player and export as full quality DV and use that in the slideshow.
    2 - if you've installed Perian on your Mac uninstall it, save the iDVD project as a disk image and see if the green is still there or not.
    There's a third way, with Quicktime Pro and an Applescript, to mask the movie so that it will be in the TV Safe area. If you find you want to try post back.
    OT

  • PPT to DVD using Quicktime Pro

    I am trying to transfer a Powerpoint slide to a DVD. I had heard it could be done using Quicktime Pro. I have made the PPT a .mov and can get it to open in Quicktime, but the animations and timing does not transfer. A 5-second PPT is coming out as 17 seconds long. How can I fix this?

    QuickTime Pro doesn't export to the MPEG-2 format so it doesn't make DVD's
    Your profile says you're using a Mac.
    Export your .avi to DV Stream (.dv) format (make sure you can play them with QT first).
    Use iDVD to burn your DVD. It will convert your .dv file into the MPEG-2 format used on DVD's.
    If you don't have a built in DVD burner you may be able to use a Firewire external. Check before you buy to be sure it is compatible with iDVD software.

  • Can you burn an AVCHD DVD using Premiere Pro 4.1?

    Alright I've been hunting the forums and net for a few hours on this one question.
    I import my AVCHD video files using Sony Picture Motion Browser for the HDR SR-12 using the full HD setting (1920x1080i) I then pull these into Premiere 4.2.1 and have created an edit, my question is, it possible to output to an AVCHD DVD i.e. a standard DVD-R with the AVCHD edit on it from Premiere/Encore?
    It's easy to burn clips straight to AVCHD DVD using Sony PMB, but not an edited file.
    I realize there are no menus possible if you do it this way, but I have an AVCHD capable DVD deck and an HD Capable screen and would really like to see how this looks. Anybody know any tricks or workarounds for this? It seems that this would be sadly lacking if it was not possible or simply an effort to force one to adapt the entire workflow to Blu-Ray for HD content which I am not prepared to do.
    I am assuming that if you could export the same file type that came in (i.e. AVCHD .mts files) that you could then have Sony PMB burn it to AVCHD DVD but I haven't figured out how to export it as such as there is only Blu-Ray output options.
    Any help, tips or tricks would be appreciated!!!!
    Regards,
    DSW

    Answering myself here for the benefit of anyone else trying to solve this problem.
    I have been pulling my hair out trying to solve this problem for the last 48 hours of utilizing AVCHD footage at AVCHD quality. I finally did find somewhat of a work around, but it requires Adobe PP CS4.2.
    There is a plug-in here:
    http://www.mainconcept.com/site/prosumer-products-4/mpeg-pro-hd-7850/features-7861.html
    Which will actually output your edit as an AVCHD file. You can then burn this straight to an AVCHD using Nero 9 and keep the highquality level of your clips and not need Blu-Ray. The DVD player will need to be AVCHD capable, but I just bought one of those for $40 as compared to the $200+ of most Blu-Ray players.
    Or if you want to be really sneaky, you can transfer it back onto your camera and play it straight to your TV using the HDMI cable.
    Hope that helps anyone stuck with the same problem.
    Regards,
    DSW

  • Burn avi to dvd using idvd

    i dont have idvd, i dont even have a mac so this may be a really stupid question, but is it possible to convert an avi file and then burn it to dvd using idvd?
    for example if a had a film in avi could i put it on a dvd to watch on a dvd player?

    It is possible to put an .avi video on DVD, but it has to be converted into DVD format (which is mpeg-2). Another wrinkle is that .avi is a so-called "container" format and it is more or less difficult to convert .avi files depending on the format (codec) inside the container.
    iDVD is fairly limited in the types of video formats it can convert (the latest version is the most flexible). If you have a very specific video you're wanting to convert, and thinking about buying a Mac, you could take it to an Apple store and see if iDVD recognizes the format. Alternatively, try visiting a Mac user group and see if they can be of assistance.
    John

  • Burn DVD using Premiere Pro 2.0

    I use premiere pro
    2.0 on my PC with Windows 7.  I can edit and save a video project, but I can't burn it to a DVD.
    Is there a burn program in 2.0, or is there another burning program that will accept premiere
    pro 2.0 projects?  I can import video segments into the Microsoft DVD burning program in
    Windows 7, but it will not accept a Premiere Pro project.

    If the issue is that PrPro does not see your burner, there might well be other programs "hooking" the burner. Do you get any error messages?
    If Win7does not see your burner, then it is likely that either the firmware, or the driver used, are out of date - or both.
    If Win7 does see the burner, then what you will need to do (depending on the answer to the first question), would be to Burn to Folder from PrPro. Then, use the free utility, ImgBurn, to do the physical burn to disc.
    Good luck,
    Hunt

  • Best quality HDV to DVD using Premier Pro CC to Media Encoder CC and Encore

    I have been struggeling to create a decent looking DVD from my HD video.  I am a newbe.  And I have read many, many forum posts trying to learn the best practice and have come out even more confused.  Many posts are back in 2009 and I don't think they apply.  Some recommend dynamic link which does not appear to be an option for me.  So I am hoping to get a clear answer to my problems.  I am including alot of info because I don't know what is really important.
    I have 2 types of video that I am merging into my sequences.
    Sony:
    Format                                   : AVC
    Bit rate                                 : 11.5 Mbps
    Maximum bit rate                         : 16.0 Mbps
    Width                                    : 1 440 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 29.970 fps
    Scan type                                : Interlaced
    Scan order                               : Top Field First
    JVC:
    Format                                   : AVC
    Bit rate                                 : 16.3 Mbps
    Maximum bit rate                         : 17.0 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 29.970 fps
    Scan type                                : Interlaced
    Scan order                               : Top Field First
    I set my sequence in Premier Pro CC to
    AVC-Intra 50 1080i
    29.97 fps
    1440 x 1080
    HD Anamorphic 1080 (1.3333)
    30fps Drop-Frame Timecode
    Hopefully I set up my sequence correctly???
    Dynamic Link is not available to me, so I export the sequence.  This is where i get confused.
    I export to MPEG2-DVD.  Preset NTSC DV Wide
    Some forum posts say to tweek the video setting for better quality, this is what I have read:
    quality to 100
    minimum bit rate  4
    target bitrate 6
    maximum bitrate 7
    click maximum render quality
    Since my source has upper field order but PP defaults to lower field order, should I switch to upper?
    I encode in Media Encoder. 
    In Encore, I have my dvd settings:
    MPEG-2
    720x480
    29.97 fps
    Lower fields first  (should this be upper??)
    I have an i5 processor, 8G ram, I am using Mecury GPU accelerator.
    I listed a lot of stuff and I appologize.  I just think the quallity I am getting isn't there.  With these setting and what I am doing, is this as good as the quality gets?
    Help

    Use a 1920 x 1080, 30i sequence for the editing, not 1440 x 1080.
    Start with the MPEG2-DVD option and the NTSC DV Widescreen preset.  Change the Quality to 100.  Change the Field Order from Lower to Upper.  Change the Min, Target and Max bitrates to 5, 7 and 9 respectively.  If you have hardware acceleration turned on, export away.  If you're running in Software Only mode, check the Maximum Render Quality box and then export.
    Bring the resulting video and audio files into Encore for authoring.

  • How do I convert MP4 file to AVI or MOV using MacBook Pro (2010)

    I am 10.6.4 new user on a new MacBook Pro. This is my first Mac computer.
    I want to convert a MP4 video file to AVI or MOV file type. How would I do this on my new Mac? Documentation says I have Quicktime X, but I cannot find Quicktime X on my system. When I try to load Quicktime 7 Pro, my system says I have Quicktime X and cannot load Pro. Apple websites say Pro version will allow me to convert the MP4 files. Anyone have any experience or ideas on what I should do? How do I find Quicktime X? Will it do the conversion for me? Thanks

    Use MPEG Streamclip, or open the QuickTime Player from the /Applications/Utilities/ folder, installing this software if needed.
    (53722)

  • Create a DVD using Premiere Pro and Encore - delay between audio and video (in ms)?

    I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
    Is this even possible with Premiere Pro / with DVDs in general?
    My sequence settings in Premiere are:
    DV PAL, 25 fps, 720x576 (16:9), D1/DV PAL Widescreen, lower field first, Audio: 48000 Hz
    My DVD settings in Encore are:
    MPEG-2 (MainConcept MPEG-Video), 720x576, 25 fps, lower field first, Widescreen 16:9 (1,458), Bitrate VBR, 2-Pass, Min 1,5 MBit/s Target 4 MBit/s, Max 9 MBit/s, GOP: M-Frames 3, N-Frames 12, Audio: Dolby Digital, 192 kbit/s

    I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
    Is this even possible with Premiere Pro / with DVDs in general?
    Frame accurate is the best you can achieve and that means 33 milliseconds at best.

  • How to burn AVI on a DVD using iDVD

    Hello folks,
    I have a number of old movies in AVI format. I can play these without any problems in QT on my Mac - I have Perian installed and Flip4Mac.
    I open iDVD, then create a new project, add the AVI file, then iDVD starts crunching the file for a while (about one hour or so, depending on how long the movie is), then, when it's about to start burning it on the disk it quits with an error message saying something about 'error at multiplexing'.
    I even tried to convert my AVI file into MOV (with this: http://www.macxdvd.com/mac-video-converter-pro/?run.mxconverter ) but I still have the same issue.
    I know that I can burn it directly to a DVD using other programs (like Toast) but I am not willing to spend some more money for it. Ont he other hand, I want to add chapters and a simple menu, so that I can skip back and forth when needed.
    To be noted that other projects coming from my camcorder are OK.
    Any idea on how can this be acomplished?
    Many thanks in advance for your help.
    L

    Assuming the movie is not copy protected, you might have better luck with this free download from apple's web site before adding the file to iDvd:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    An AVI is a container, not a format; no single component or method will work for all AVIs
    If you need help using mpegstream clip then simply use the search field on the upper right corner of this page.
    Hope it helps but if not just come on back.
    Message was edited by: SDMacuser

  • I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

    I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down  command+optoion+p+r and still nothing???
    Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

    Unless your iMac is still covered by AppleCare, get an external DVD burner.
    You can get perfectly good ones from Amazon for less than $40.

  • How do i burn a dvd using final cut pro x

    how do i burn a dvd using final cut pro x?

    Use the Share button at the far right end of the Toolbar or File>Share>DVD.

  • Would I use Premiere Pro for making a DVD?

    I am looking to put my graphic design porfolio on a DVD.  I want to have an interactive DVD with a menu where user to pick which area of design they want to explore and my resume itself.  Then when they pick a piece...I want to have the information page to pop up first then the user have the ability to pick the piece where it will enlarge on the screen or vice versa.  It's all still pieces, no video.  Then I want to author the DVD.
    However, I am not sure which Adobe programs to use to do this DVD.  I was thinking of using Premiere Pro CS4 and Encore??  Am I correct?
    I need direction and advice!!  Thank you!
    Rachel

    Web or Internet functions on a DVD
    Macromedia Director http://www.adobe.com/products/director/ for mixed content

  • What compressor settings settings are best for 1080i  to output to DVD using DVD Studio pro?

    What compressor settings settings are best for 1080i  to output to DVD using DVD Studio pro? I used FCP 6, exported using Quick Time.

    DVDs are only SD. There was at one time HD-DVDs, which DVD SP and Compressor can make, but HD-DVDs will only play in Macs and, now obsolete HD-DVD players. HD-DVDs will not play back in standard DVD players or Blu-Ray players. If you want to make a "DVD will be played on DVD player for TV" disc, your only choice is SD.
    If you want HD video on a disc, then you want Blu-Ray. You will need a Blu-Ray burner (Apple does not make a Blu-Ray burner so you will have to buy a third-party Blu-Ray burner), Blu-Ray discs and software that will make a Blu-Ray disc. That could be the latest version of Compressor, or FCPX, or Toast, or Encore.

  • I used to shoot video in my Powershot S3 IS (MVI_.AVI) and load it into iPhoto, I used quicktime pro so I could convert it for emailing to family members.  That was when I was running Leopard now with Mt. Lion nothing works.  Videos do not open at all?

    I used to shoot video in my Powershot S3 IS (Format MVI_.AVI) and load them into iPhoto, I used quicktime pro so I could convert for emailing to family members.  That was when I was running Leopard now with Mt. Lion nothing works.  Videos do not open at all.  Any simple suggestions, I am not real keen on iMovie Productions and not real certain how they compress for emailing attachments.  Something simple here that I am missing?  Thanks so much.  I am a grandpa trying to share with family members far away (quickly & simply).

    I am surprised that Apple did not build a converter into Mt. Lion.
    Apple does have a converter built into Mountain Lion. It is call "Quicktime." However, in order to use this converter, you must first make sure the compression formats are playback compatible with QT. Basically, there are three levels of QT compatibility. The lowest is "Playback." These file can be played by QT but may not be conversion or edit compatible with QT. The second level is QT "Conversion" compatible. These files are playback compatible and can be converted to other compression formats using QT. "Edit" compatible media files are "Fully" compatible with QT since the can be played, converted and/or edited by QT. The main problem here is that AVI is a "legacy" file format that has not been officially supported by Microsoft for more than 11 years when it was replaced by Windows Media multimedia file/compression formats. Many of the original compression formats used in AVI files have never been transcoded for the Mac platform, use beyond system 9, or use beyond PPC platforms. In addition, some commonly used AVI codecs are proprietary or use non-standard (hybrid) profile and level combinations. In short, there is little wonder that Apple has been distancing itself from this outdated file type as it re-writes and upgrades its own QT structure to support more standardized, more scalable, more modern high definition file types and compression formats. It is really unfortunate that users continue to use this outmoded file type simply because it is freely available, easy to use, or they are simply too lazy to move on to a more modern or more efficient file types and/or compression formats.
    I tested Wondershare Video Converter Ultimate for the Mac, which seems to be the "state of the art".  I may be purchasing a new camera which might create a whole new set of variables.  This program seems to cover all bases and is great for novices.
    There are many third-party apps available if you wish to search for them. Many are even available in the App Store. Most do their job well and it is usually a matter of personal user preference as to which is best.
    HandBrake seems more suited to folks with more experience and knowledge.
    I mentioned Handbrake primarily because it is free and easy to use when you employ the included conversion presets options. (The TV options can normally be used for almost any situation depending on the source file and output requirements.) It is also excellent for more experienced users, but has a somewhat limited choice of output options as it does not access the user's system QT codec component configuration.

Maybe you are looking for