Avid Unity with Adobe Premiere Pro CC and After Effects

Has anyone used Avid Unity for media with Adobe Premiere Pro CC? I'd like to hear some feedback as we are working on doing that right now, and I'd like to know what the hurdles or pitfalls might be.

Open System Preferences > Mouse and/or Trackpad.
Adjust the speed.
If that fails, try running the combo updater.
OS X Mavericks 10.9.3 (Update (Combo)
http://support.apple.com/kb/DL1746

Similar Messages

How to properly configure a graphics card for Adobe Premiere Pro, SpeedGrade, and After Effects?

Alright, so I have the following system configuration:
2 NVIDIA Geforce GTX 970s
5960X CPU
MSI X99 Gaming 7 Motherboard
32 GB DDR4 RAM
256 GB and 1TB Samsung 850 Pro SSDs
Basically, although I have the whole system built together, I'm unsure how to check and know whether or not Adobe Premiere Pro is actually using the graphics card or not. I know that it has to be using some of it, otherwise it wouldn't launch properly (as I discovered from a recent experience.) However, I don't know if there are, perhaps, certain settings within the NVIDIA control panel that should be configured so that Premiere Pro can use the card to its full potential. Here is an example of what I'm talking about:
In other words, these are (I'm pretty sure) all of the default settings that the control panel applies to Premiere Pro. However, I'm not sure if there are any settings in here that I need to change or not. So what I'm looking for in a response to this question:
What settings, if any, should I change for Premiere Pro (as well as other adobe applications that can utilize all the strength of the GTX 970)?
How can I check the GPU activity to know that it's being used during a render? (For example, I can check the CPU utilization with the Task Manager while I render to see that it's being utilized to 100%).
If, perhaps, something else goes wrong and even with the right settings, let's say the card still isn't being fully utilized, what other settings might I have to change to make sure that the GTX 970 is being fully used by Adobe Premiere Pro/After Effects/SpeedGrade CC 2014?

If you want a benchmark to measure the performance of Premiere Pro's utilization of your: disk system, GPU and CPU use our Premiere Pro BenchMark (PPBM)
When you finish running the test and then run the script, you will get this report
This happens to be the result of my laptop (with SSD drives and a GTX 765M GPU)
The disk performance is self explanatory.
Number 2 is a seven layer very complex timeline with heavy CPU and GPU assistance, without GPU hardware acceleration (CPU only) it would take greater than 1350 seconds.
Three above is a measure of a exaggerated timeline using many, many GPU MPE accelerated effects and features that will use a GPU at 99% load (54 seconds above) and a CPU only export of the same timeline (802 seconds).
If you want to compare your results to others you have to register on the PPBM7 site to see the results.
EDIT! I corrected the number in 2 above originally I said 900 seconds but really it was greater than 1350 seconds

XDCAM HD workflow with Adobe Premiere Pro CC and Macbook Pro

Hi folks,
I have an assignment for a TV production to secure and convert the data (mxf files XDCAM HD 422 1080i 50 / 50 Mbit/sec with 8 audio channels) from Sony XDCAM camcorders (PDW-700) for postproduction.
The producer wants me to convert the mxf files during production to Apple ProRes 422 (HQ) for faster and smooth editing during postproduction.
I'm not sure about the final output yet, but I guess it will be either 720p50 or 1080i 25, since the production will be broadcast and as far as I know this is the standard for HD on German television. It is also not clear which NLE will be used for editing (usually one of the producers edits their projects with FCP, but this time they've got their hands full and are still looking for someone to outsource postproduction.
Unfortunately, my Macbook is getting fixed as we speak, so I can't try things out.
Since this is the first time I'm doing this workflow, could someone please check if I got everything right?
1. Can someone please confirm that I can actually convert the mxf files using AME CC to Apple ProRes 422?
Or do I need to install any other tools/converters for this task? Does MPEG streamclip do the job? Any other freeware?
2. When converting to Apple ProRes422, the producer suggested to deinterlace the footage (1080i 50) to 25p, if 720p or 1080p I have to find out tomorrow since our conversation got interrupted this afternoon.
In my opinion this doesn't make sense, though. First, if output to 1080i 25 it has to stay interlaced anyway. Second, in case the output will be 720p 50 I would edit the footage either natively or in Apple ProRes 422, but leave deinterlacing until the very end when outputting to the final format. This way I could use an advanced deinterlacer, e.g. the one from Magic Bullet Suite, rather than just checking some deinterlace box in the export settings for Apple ProRes 422.
The reason the producer suggested to deinterlace right away when using an intermediate like ProRes was that she and the client got irritated by the jagged lines from the interlaced footage when editing the last project with the same requirements on a progressive display.
3. What would be the best solution to tackle this issue (jagged lines) during editing?
As I said my Mac is getting fixed, so I have no way of trying things out,and I usually edit DSLR footage which is progressive anyway.
But if I remember correctly I can switch my monitor between 1080p and 1080i. This should do the trick, shouldn't it?
4. Can I keep all of the 8 audio tracks when converting to ProRes using AME CC ?
5. Is ProRes422 (HQ) really necessary, or is the regular quality sufficient for this kind of job?
6. Let's assume the whole project would be edited within Adobe Premiere Pro CC and system specs as stated below:
Since Adobe Premiere Pro CC has native support for XDCAM HD is there any advantage of using an intermediate like ProRes at all?
How smooth is native editing with XDCAM HD in Premiere Pro CC? I don't think there will be more than 3-4 video tracks in use...
Thanks for your help!
working with
Adobe Premiere Pro CC and Adobe Media Encoder CC
Apple MacBook Pro
Intel Core i7 Quad Core Prozessor
2.3 GHz and 6MB L3 Cache
16 GB RAM 1600MHz DDR3,
256 GB SSD
Intel HD Graphics 4000 512MB + nVidia GeForce GT 650M with 1 GB GDDR5 RAM

Thanks Jim! I knew there must be a reason xdcam is widely uses for eng aquistion :) I think they used FCP 6 or 7 on their last project... So what about monitoring interlaced footage on a progressive screen? Any advice on that? Is there a converter built in to APP CC that deinterlaces in realtime when monitoring interlaced sources on a progressive screen? And would you agree that deinterlacing source material is best left right before outputting?

Premiere Pro CS5 and After Effects CS5

Hi I'm fairly inexperienced when it comes to Adobe products. I was wondering whether Premiere Pro CS5 and After Effects CS5 can be used together, for instance Premiere Pro to do the basic editing and After Effects to do some more advanced stuff before importing the clip back into Premiere Pro for exporting the film.

Yeah.

Premiere Pro CC and After Effects CC work slowly together - much worse than CS6

Premiere Pro CS6 and After Effects CS6 worked together really well. I could have both programs open and make a change in After Effects, then go back to Premiere Pro and see the changes pretty quickly. Since upgrading both to CC, I can't jump back and forth and see the changes quickly. I literally have to hit Enter and render the After Effect clip after every freakin' time I make a change to it in order to see it without any pauses or jumpiness in the playback. CS6 worked great. I can't express my disappointment in the Creative Cloud "upgrade". So many things are SO MUCH WORSE!!! Adobe you have to fix this stuff.

The speed of the connection is dependent on your hardware and the type of comp you have in AE.
I haven't noticed any significant performance difference between the two versions (I've also been heavily using dynamic link since CS6 ).
Some comps will play fine in Premiere, some comps will need rendering. I generally render the clip in Premiere, as opposed to AE.
If the same comp from CS6 is behaving significantly worse in CC, then you might be on to something, but it is most likely a bug isolated to your hardware config and not a general CC issue.

Premiere Pro CC and After Effects CC - Dynamic Link of an .aep not working - Stalls during import

I have been trying to import an .aep file into Premiere Pro CC from After Effects CC. As suggested, I import the file. The dynamic import window appears. It states connected to file along with the import files ... dialogue box. It stalls there.
I have been working off my network and have all the files collected on my machine.
My workaround to get me to deadline was to render my clips from AE and import them. Importing the .aep would make more sense from efficiency and workflow.
Thank you

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Does Adobe Premier Pro CS6 and After Effects CS6 support the graphic found in the new late 2012 27" iMac?

Hi there guys! I´m very, very, VERY close to buy a full configuration iMac (the late 2012 27" model) but I have reed in different forums that Adobe Premier Pro CS6 and other applications from Adobe such as After Effects DO NOT support the graphic cards found in the new iMacs....
is this true??????
i really wouldn´t understad the logic behid the decission of picking a graphic card that is not supported by one of the leading video editing sofrware used today.... specially when this computer is suppoused to be an Editing Animal....
I hope this rumor is not real..... then I can be just... really happy and get my new desktop computer and work, work, work, work
thanks for your attention

Hi there Daniel, thanks for paying attention to this subject. Today I got an answer from Larry Jordan from his blog (I believe he is one of the "videoguys" from http://videoguys.com and he said that actually adobe does not support those GPU that we will find in the new late 2012 iMacs. However it seems there is a way to make that work out.....
here is his review on his new iMac, at the very botton you will see comments from people and his answers... one of the last coments is mine regarding this subject, this is what I asked and his answer:
mGabo Jan 18, 2013 08:50Hi there Larry, I reed in your other post on your iMac that Adobe didn´t support the Nvidia graphic cards found in this model, I have been asking in forums about this and people say Adobe does supports them……Do you know if Adobe now works fine with these cards?
Larry Jan 18, 2013 11:10When I contacted Adobe about this a couple months ago, just after the release of the new iMacs, I was told that Adobe did not support the graphics card at that time. There is, however, a workaround, which I’m hoping to write up this weekend.Larry
mGabo Jan 18, 2013 12:28 oh! great Larry! please post the link of that article so I can follow that!many thanks
here is the link of this article: http://www.larryjordan.biz/app_bin/wordpress/archives/2084/comment-page-1#commen t-7853
so far I haven´t find anyone who can expalin to me how can I get these Nvidia GPUs working with adobe premier and aplications alike from adobe.

Adobe premiere cc 2014 and after effects cc 2014 crash on launch

Firma con problemas:
Nombre del evento de problema: APPCRASH
Nombre de la aplicación: Adobe Premiere Pro.exe
Versión de la aplicación: 8.0.0.169
Marca de tiempo de la aplicación: 536f4f89
Nombre del módulo con errores: ImageRenderer.dll
Versión del módulo con errores: 8.0.0.169
Marca de tiempo del módulo con errores: 536f2c18
Código de excepción: c000001d
Desplazamiento de excepción: 00000000001f5382
Versión del sistema operativo: 6.1.7600.2.0.0.256.1
Id. de configuración regional: 3082
Información adicional 1: 0b2d
Información adicional 2: 0b2df4702c3fc6489bf922fb8e966350
Información adicional 3: fa9f
Información adicional 4: fa9f59f642d335ee71c6667e52000d39
Lea nuestra declaración de privacidad en línea:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0c0a
Si la declaración de privacidad en línea no está disponible, lea la declaración de privacidad sin conexión:
C:\Windows\system32\es-ES\erofflps.txt
Firma con problemas:
Nombre del evento de problema: APPCRASH
Nombre de la aplicación: Adobe QT32 Server.exe
Versión de la aplicación: 8.0.0.169
Marca de tiempo de la aplicación: 536f4f05
Nombre del módulo con errores: ImageRenderer.dll
Versión del módulo con errores: 8.0.0.169
Marca de tiempo del módulo con errores: 536f3004
Código de excepción: c000001d
Desplazamiento de excepción: 001e5353
Versión del sistema operativo: 6.1.7600.2.0.0.256.1
Id. de configuración regional: 3082
Información adicional 1: 0a9e
Información adicional 2: 0a9e372d3b4ad19135b953a78882e789
Información adicional 3: 0a9e
Información adicional 4: 0a9e372d3b4ad19135b953a78882e789
Lea nuestra declaración de privacidad en línea:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0c0a
Si la declaración de privacidad en línea no está disponible, lea la declaración de privacidad sin conexión:
C:\Windows\system32\es-ES\erofflps.tx

Hi,
Please refer to the help document below:
CC applications close immediately after launch
Regards,
Sheena

Erratic performance / missing footage with Premiere Pro CC and After Effects CC 2014 dynamic links

Hi all,
I briefly touched on this amongst a host of other issues I has having while cutting my last project.
Unfortunately I never heard anything from anyone regarding my issues with the Dynamic Link system.
I had to bite the bullet and export (2-4K RAW) chunks of my last project, out of premiere using a Quicktime animation codec. This added an extra week to the post production process (which I did NOT get paid for).
I'm also a bit frustrated because it pushed the project past the deadline. Though the client was understanding, they were far from thrilled and it reflects poorly on me.
Anyhow. Project complete, on to the next-
This time, I'm using mostly footage shot from an FS700 in AVCHD. I figured maybe the RED footage was somehow too much for the program to handle with my specs, however I am having the same issue as last time.
I'll select a clip, or group of clips, go to replace with after effects composition, and sometimes they all make it, and often times they don't. The clips were shot within a couple minutes of one another and no settings were changed on the camera.
I've noticed sometime's the media will show up in the timeline, but not appear on the monitor (as pictured below). Other times the name of the clip will appear in the comp, but there will be nothing on the timeline OR in the monitor.
Never had this problem in CS6.
Adobe or anybody, please help! This is absolutely killing my workflow, and costing me time and money.
Here are my specs:
I'm running Adobe Premiere CC 2014 v8.1
Freshly installed Windows 7 Professional SP1 PC Desktop
Freshly installed Samsung 1TB SSD running my OS and Adobe CC
Intel Core i7-2600k CPU at 3.4GHz (8CPUs) - Watercooled
16GB Ram (3gb allocated for other programs)
Nvidia GeForce GTX 570 4GB GDDR5 - 3.40.62 Drivers installed
Pulling media from 2x 3TB Seagate Barracuda 7200RPM drives, striped at RAID 0
In this case pictured the second two clips in the sequence linked into AE, but the first wont show up in my monitor.

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

AMD FirePro D500 and Premiere Pro CS6 and After Effects CS6?

My company just recently purchased the new 2013 Mac Pro with the AMD FirePro D500 graphics cards. Everytime I try to open After Effects CS6 I get a GPUManager Sniffer Result Code: 3 error and Premiere Pro CS6 sits on the splash screen indefinitely. Does Adobe not play nice with the new card? Am I out of luck?

In effort to fix the problem while waiting for a response I unstalled both AE and PP CS6 but not I can't seem to reinstall them from anywhere.... so I don't know what version of After Effects I have/had.
My operating sysem is OS X 10.9.2 (13C64) . My graphics card information is:
AMD FirePro D500:
Chipset Model:          AMD FirePro D500
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          3072 MB
Vendor:          ATI (0x1002)
Device ID:          0x679e
Revision ID:          0x0000
ROM Revision:          113-C3861J-687
gMux Version:          4.0.11 [3.2.8]
EFI Driver Version:          01.00.687
As far as CUDA, I originally had an iMac that was using Time Machine and that is how I transfered my stuff over to the new Mac Pro. It had CUDA on there...

Premiere Pro CS5 and After Effects CS5 crash after splash screen

Im am fed up with this ive done everything i can and no one seems to know whats wrong, i installed CS5 on my macbook and imac i7, and they both worked for a while but then suddenly my imac i7 cs5 stopped working and kept crashing, my macbook continues to work just fine, ive even done a system reinstally and reinstalled os x and yes it would work for a little and then stop, they both have the same programs, whats weird is when i create a new user with admin privileges on my imac it would work fine but i deleted some files in the main account trying to fix the problem and no it wont work in the second account so here i am doing a system reinstally one last time. i called adobe they were no help at all literally, i called apple they did as much as they could i mean apple really made me feel like they tried, so here i am can anyone help?

Ok so i figured it out, the problem is my downloaded fonts from the internet. What sucks is that adobe cs4 applications ran perfectly fine with them, but now cs5 doesnt . I uninstalled my downloaded fonts and guess what?! it worked! I wonder why cs4 starts up with no problems with the same fonts and cs5 cant, thats just stupid...

I'm having trouble downloading Premiere Pro CC and after effects

I am using the cloud however the requested software is not showing up.please assist me.

Adobe's MINimums http://www.adobe.com/products/premiere/tech-specs.html
-Programs won't display if they will not install on your computer
-http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html
This is a user to user forum, I think you need Adobe
Adobe contact information - http://helpx.adobe.com/contact.html
Adobe Knowledgebase http://www.adobe.com/support/
Help for Download & Install & Setup & Activation http://forums.adobe.com/community/download_install_setup
Next link has a "Chat Now" button near the bottom
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ? Any solution * Advance Thanks

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ?
Any solution * Advance Thanks

FCP X will import into separate clips every time it detects a scene change (as when you stopped and started recording in the camera). There is no option to avoid this, as far as I known.
You may try importing from camera using Quicktime Player X and then bringing the imported file into FCP X.

Export multichannel mp4/h.264 with Adobe Premiere Pro CC

Dear community,
we currently test the Adobe Premiere Pro CC trial (German) on a Windows 7 Professional PC.
However, we are not succentful in exporting a multichannel mp4/H.264 clip.
We haven't found an answer on our issue so far, so I hope that this question was not answered several times before in this forum.
If we chosse the H.264 exporter, we cannot select a multichannel audio export (only mono, stereo, 5.1).
In contrary, if we select the Quicktime exporter, we are able to export our sequence with a 4 channel audio master with 4 mono tracks, but we can only export it with a DVCPro Codec in a mov container.
If we try to select a HD H.264 preset we get an error alert stating that the preset contains a not compatible video codec.
What are we doing wrong?
Thanks for every suggestion.
Thanks in advance
André

Thanks for your thoughts, Richard.
Your are right, we currentky use the Adobe Premiere Creative Cloud version.
We managed it to solve at least the error message. It was caused because Quicktime was not installed together with the Adobe Premiere Pro / AME setup on our computer.
After we installed Quicktime 7 manually, we can select a Quicktime/H.264 preset without any problems within the exporter settings.
However, the Quicktime/H.264 export dialog seems to only allow a mono or stereo audio export. No multichannel-audio export.
This possibility is only displayed in Richards case, if we select the Quicktime exporter and an Uncompressed Video or DV preset.
Our question to the Adobe developer guys is the reason behind this limition? Other video authoring prograns can export a mp4 with H.264 Codec with multichannel AAC without any problems.
How can we do this with Adobe Premiere Pro (not necessarily via Quicktime)?
André

Avid Unity with Adobe Premiere Pro CC and After Effects

Similar Messages

Maybe you are looking for