Avinaptic,a powerful video file (and DRF) analyzer for testing

AVInaptic is a program with a simple GUI that analyzes file type AVI, ASF / WMV, MP4/MOV, Matroska (MKV), OGG, GMOs and FLV, and shows a lot of information on the technical characteristics (useful in predicting whether the movie will be read by their player stand-alone). It also allows you to make simple changes on the fly, set delays (or advance) on all audio tracks and edit the FourCC allows you to remove any trace in the files (video, audio, subtitles, attachments);. Italian author site but you can choose english in the program. Site translated here.
http://fsinapsi.altervista.org/ (italian)
http://forum.doom9.org/showthread.php?s … c&t=123076
# Contributor:Xemertix <arch88(at)katamail(dot)com>
pkgname=avinaptic
pkgver=20071118
pkgrel=1
pkgdesc="a powerful video files analyzer"
arch=('i686' 'x86_64')
license=('GPL')
depends=('sqlite3' 'gmp' 'gtk' 'libjpeg' 'libpng' 'file')
[ "$CARCH" = "x86_64" ] && depends=('lib32-sqlite3' 'lib32-gmp' 'lib32-gtk' 'lib32-libjpeg' 'lib32-libpng' 'lib32-file')
url="http://fsinapsi.altervista.org/"
source=(http://fsinapsi.altervista.org/code/${pkgname}/${pkgname}-fixed.tar.gz
avinaptic.desktop)
md5sums=('d5f3ba28fe0e005ebb38bd8725f89932'
'64e5d6855e5957e7cd266198abcd5324')
build() {
cd $srcdir
# Program
install -D -m 755 ${pkgname}/avinaptic $pkgdir/usr/bin/avinaptic
# Freedesktop compatibility
install -D -m 664 ${pkgname}/icone/avinaptic.png ${pkgdir}/usr/share/icons/avinaptic.png
install -D -m 664 avinaptic.desktop ${pkgdir}/usr/share/applications/avinaptic.desktop
# Documentation
install -d -m 775 ${pkgdir}/usr/share/doc/avinaptic/
install -D -m 664 ${pkgname}/testi/* ${pkgdir}/usr/share/doc/avinaptic/
Screenshot
Note:Avinaptic is a 32-bit program.For 64bit installations i've included lib32-file in the archive.The program is available in both english and italian.
Current Issues:
Only the analysis of .mkv files is not working properly on my 64 bit installation..avinaptic shows garbaged hex output data.Maybe an incompatibility with something..other video files are analyzed correctly.
http://www.datafilehost.com/download-3a701c57.html
Last edited by Xemertix (2009-05-22 19:44:15)

s3kt0r wrote:Question: Since I don't actually use any icons (ratpoison user), I can just comment out the line which calls for avinaptic.desktop, right?
Yes.
edit: Installed ok, no problems with matroska, no problems with output, im on 32b though.
thanks
The output with mkv files looks like that for me:
[ About file ]
Name: trailer2.mkv
Date: 16/05/2009 12:39:32
Size: 6,337,145 bytes (6.044 MB)
[ Generic infos ]
File type: data
[ Hex dump ]
00000000: 1a 45 df a3 01 00 00 00 00 00 00 23 42 86 81 01 |.Eß£.......#B...|
00000010: 42 f7 81 01 42 f2 81 04 42 f3 81 08 42 82 88 6d |B÷..Bò..Bó..B..m|
00000020: 61 74 72 6f 73 6b 61 42 87 81 02 42 85 81 02 18 |atroskaB...B....|
00000030: 53 80 67 01 00 00 00 00 60 b2 3e 11 4d 9b 74 40 |S.g.....`²>.M.t@|
00000040: 3d 4d bb 8b 53 ab 84 15 49 a9 66 53 ac 81 df 4d |=M».S«..I©fS¬.ßM|
00000050: bb 8c 53 ab 84 16 54 ae 6b 53 ac 82 01 37 4d bb |».S«..T®kS¬..7M»|
00000060: 8d 53 ab 84 1c 53 bb 6b 53 ac 83 60 af 41 4d bb |.S«..S»kS¬.`¯AM»|
00000070: 8d 53 ab 84 11 4d 9b 74 53 ac 83 60 b0 f3 ec 01 |.S«..M.tS¬.`°óì.|
00000080: 00 00 00 00 00 00 93 00 00 00 00 00 00 00 00 00 |................|
00000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
This report was created by AVInaptic (18-11-2007) on 21 mag 2009, h 09:41:13
I need some arch64 tester

Similar Messages

My complaints and Questions MP4 M4V video files and other complaints

My complaints and Questions MP4 M4V video files and other complaints
I have been scratching my head as to how to fix my problem and I found some answers and some questions along the way. First of all, I have a video that should be correctly formatted for my iPod. Its specs are:
Kind: MPEG-4 video file
Size: 19.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 12:25 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 360 kbps
Video Dimensions: 352x264
Video Codec: H.264
F:\File\AnotherFile\A3rdFile\TheMovieFileInQuestion.mp4
Wow that was a chore. Apple! Let us drag copy and paste our info tabs information so we don’t have to type all this stuff when we are having trouble. **another problem and suggestion** right there.
Ok, back to the problem of the forum.
From what I can see from http://www.apple.com/ipodclassic/specs.html this file falls in line of everything required in order to be able to play on my iPod. It plays in iTunes fine but will NOT sync with my iPod. I get an annoying message that states, “Some of the Songs and videos in your iTunes library, including “BlaBlaBlaiPondFixYourJunkBlaBlaBla”, were not copied to the iPod “My iPod” because they cannot be played on this iPod.” Why oh why can iTunes play this video file but my iPod cant. Especially when the specs on Apple’s website say it can.
So that was bugging me for a LONG time until I found my “Create iPod or iPhone version” option in the “Advanced” heading. Thank goodness this made my files playable on my iPod. Extremely LONG wait though. I know that other programs convert it in ½ the time. But times not to important as long as it gets done, (would be very convenient if it was faster though **Problem and suggestion**)
Ok, now that I have used the “Create iPod or iPhone version” option it has slowly but surly converted my video. Ok, here is my main problem, the new file which is the result of the conversions information is as follows:
Kind: MPEG-4 video file
Size: 35.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 1:28 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 658 kbps
Video Dimensions: 352x264
Video Codec: H.264
C:\File\WhyIsThisNewFileInMyMusicFolder\TheMovieFileInQuestion.m4v
So basically it has made my file bigger *not a bonus in my book* greatly increased my Bit Rate *another interesting feature*, and I think the biggest change it has changed it from an .mp4 to an m4v.
Why does it need to be an .m4v I could have sworn some of my videos were or are in mp4 which shouldn’t matter anyway because I was under the impression that iPods could play mp4 files. So that’s my biggest complaint and question. Why can my 80GB classic iPod not play my MP4 files and why am I forced to convert them??
This conversion also creates 2 files in iTunes when I am done which is annoying because I have to go into my files info and look to see what file is the mp3 in order to remove it. Very annoying I can open my iPod options and see the files and some are faded (the ones it can not play) why can’t I remove them from that area.Suggestion Apple please make files that cannot be played on my iPod stand out some how for easier cleaning Suggestion. Thank you.
Speaking of cleaning iPods, when I moved my entire library to an external drive I was faced with a terrible problem. “This file could not be found, would you like to locate file”, I was faced with this annoying message at least 600 times. Now I am glad that iTunes has a little “!” mark to show dead links so that you do some minor cleaning, Good Job iTunes No compliant there. However iTunes has no way of selecting all the broken files for major cleaning (like in my case). Going through and deleting over 600 files 1 by 1 is extremely time consuming and annoying. **Suggestion Apple please add more cleaning features for organizing iTunes**.
Ok, speaking of organization now, another problem that appeared when converting my video files was that it put my new videos into the location where I have all my songs (my external hard drive) why can’t it put the new files in the locations of the original file? I have my computer highly organized and my original files were in that drive in that folder for a reason. If I could open my original file and skip the conversion, my iTunes would go to that specific folder to access the file which is fine. But now these new conversion files are elsewhere taking up space and disorganizing my computer. True I can go into the new location and move the files to where I want them (original location) but I don’t think I should have to hunt them down, copy, move, delete ect etc for all these files over and over. Very annoying, time consuming and should be unnecessary. **Suggestion Make file creation and location more customizable, and user friendly, your customers will love you for it**.
Well since I have gotten into Apples iTunes and iPod problems that I have had to face I might as well bring up one or two more problems and suggestions. About a month after purchasing my iPod a sibling bought one as well. His however is way more convenient then mine. I suppose he has a 5th gen. so here is my question: why does he have a search option and I don’t!!!! Why does he get more features every so often and I don’t?! Why can’t Apple write some software for us classic guys which got the iPods going! It’s very annoying when I have to spend more time looking for the song then I spend actually listening to it, when he can pull his up in like 3-6 seconds? I highly doubt the hardware between our iPods is that dissimilar and even if they are why cant software be written for us. **Suggestion treat all your customers good not just the newer ones, and make some more features for the classics like me and my iPod.” We will be grateful for it I promise.
Ok, I am almost done. Let me just recap my questions, I know my post is kind of lengthy.
#1. Why can’t my iPod play MP3 video files? And why do I have to convert to almost all the same settings except changing it from an mp4 to an m4v. according to Apples own site I should be able to play .m4v .mp4 and .mov files!! Note: remember iTunes plays them fine but my iPod will not.
#2. Would be much more convenient to be able to copy the information from the windows in iTunes so that problems and trouble shooting would be much easier. A little check on off options in iTunes advanced settings would be terrific.
#3. Why is the conversion so slow? Please speed it, you have the power. Convenience is the thing that sells products.
#4. Files that cannot be played on the current iPod need to be easier recognized for simpler cleaning.
#5. Also make an easier way to select all dead link files for faster cleaning, deleting, etc. This one is important.
#6. Make a user friendly way to change where my files are going to end up once I convert them for iPod more options and better customizable settings are need.
#7. One of the most important is ADD A SEARCH OPTION. I and we classics will LOVE Apple for it.
For you readers, I apologize for the long post, and any grammatical errors you might find throughout it. These are problems that I have faced with these programs and hardware and I wanted to make sure they got acknowledged and hopefully addressed. Any information about why I cannot play MP4 Video files on my iPod would be the best. If anything in my post gets answered that’s the one I want most. Will save me a lot of hassle.
Thank you all and I look forward to your suggestions and comments. All are welcome and appreciated.
Sincerely,
Bond, James

Was playing with iTunes and thought of another suggestion! Let us play files in iTunes from an iPod! A friend or sibling should be able to plug his iPod into my computer open iTunes and play any of the files there. Many times I have wanted to show a movie clip or video to a friend, and I have the dock so I can do it on my T.V. but play it on their computer in their iTunes forget it. That would be a very nice feature as well so we can watch our movies at maximum size or listen to music on a better sound system, just another suggestion that would be nice. Thanks

I had this video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder.

I had a video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder. I've tried to undo the action. No luck. I wasn't running my Time Machine. So, I can't go back. Help. It's the only copy of this video.

I've tried to undo the action.
How?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
it's the only copy of this video.
Where did you get the video from?
From the pic I noticed that the folder is 841.9mb. What's inside? Or what happens when you click on it?

Imported a video file and there is only audio.

Imported a video file and there is only audio. It was originally captured from VHS onto a PC. It took over 24 hrs to import the 4.24 GB mpg.
Is there something I need to do since it was a mpg from a PC?

I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
Good luck, and happy editing,
Hunt

Is it possible in java to extract audio from video file and ...

Hi,
Is there any API in java for creating DVD video from Normal TV and extract audio from video file and convert MP3 to WMA file. What about java Media Framework and Java 3D API?
If it is notpossible in java which will be the next option. Vc++?
Please help me.
Thanking in advance.
From,
Vinod A

lol
If all you want is to create a backup of some file you can do:public class Foo
    public static void main(String[] args) {
        Foo f = new Foo();
        f.createBackup("something.xls");
    public void createBackup(String inFile) {
        FileInputStream in = null;
        FileOutputStream out = null;
        try {
            in = new FileInputStream(inFile);
            out = new FileOutputStream(inFile + ".bak");
            int read;
            while ((read = in.read()) > -1) {
                out.write(read);
            out.flush();
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
        } finally {
            if (in != null) {
                try {
                    in.close();
                } catch (IOException e) {
                    e.printStackTrace();
            if (out != null) {
                try {
                    out.close();
                } catch (IOException e) {
                    e.printStackTrace();
}

After saving project upon reopening one of my video files and it's corresponding audio is red

After saving project upon reopening one of my video files and it's corresponding audio is red (both are offline). Attempts at relink result in a warning that the audio will be deleted (which is does when tested).
This project is based on a multicam sequence (2 video files) and using Pro CC (latest Cloud build).
Anyone come across this and/or have a solution? Thanks in advance.

Appreciate your assistance and guidance Mark. Yes, I am a newbie on this forum - and fairly new to premiere pro though have used elements since version 4. I'll answer your leads below.
First off, some bookkeeping & jargon matters:
"you reported the file extension (.mts) but not the codec of the video therein. AVCHD?"
.mts files are Sony AVCHD files. filmed with Sony NXCAM NXU5 camera.
"re: the version you're on, rather than simply stating "the latest," it helps to report the exact version numbers as shown in the About box. That not only avoids any confusion today but also aids customers who come upon a thread months from now."
Version is 7.2.0
"you refer to "rendering" to a new format. I know that "render" is the right term in some NLEcosystems, but with Premiere we distinguish between rendering and exporting/encoding. Rendering is reserved for creating preview files for smoother playback within PPRO, whereas exporting/encoding covers writing a sequence out to an output clip."
My bad - I exported/encoded the sequence to a new output clip.
Now back to our regularly scheduled troubleshooting. Three questions:
did you start this project in CC7.1 and then update to 7.2/7.2.1 along the way?
I started this in 7.2.0
are either of the clips in the multicam sequence spanned?
I don't know what "spanned" refers to
I gather that you created the multicam sequence via the new workflow in the Project panel: select the clips, right-click>CreateMulticamSourceSequence. Am I right?
Correct
If so, please create a new sequence, set the timeline to insert sequences as individual clips (via the left-most button under the timecode control), add the multicam sequence to the new sequence, and post a screenshot of the timeline.
Now all of a sudden I am able to open my project file(s) as before with no problems.... very curious.
I did this and then could not find my multicam sequence.... so no screen shot... BUT what happened?
thank you for your guidance with this.

How to get video file and iTunes Extra to show as one file in iTunes?

When I purchase a movie in iTunes with iTunes Extras, after the download is finished in the "Movies" and "Genres" view they appear as one file. You click on the cover, it opens, shows the "Play iTunes Extra" button as well as a small Play arrow button next to the title to play the movie directly. Only in "List" view do they appear as separate files.
How can I achieve that for my own iTunes extra? I tried giving the .ite the same XID as the movie file but that didn't work, they continue to appear as separate files in iTunes and the little play button when expanding the iTunes Extra doesn't work obviously. Anyone can tell me how this is done?

Ok, I finally figured it out... there is 2 files that play a critical role in this
first is manifest.xml
in this file ensure that the library_item type string references the xid for your video file, and it has to be a proper xid. The iAd Producer manual explains how to create one if it does
example:
<library_item type="video" local_id="feature" xid="TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC" name="Your Movie"/>
second file and even more critical is iTunesMetadata.plist. There is a couple of strings in there that lace the iTunes Extra to the film and vice versa
<key>itemId</key>
<integer>987654321</integer>
<key>itemName</key>
<string>Your Movie - iTunes Extras</string>
The first is a unique 9 digit number that identifies your iTunes Extra file, the second is the name of the file that should follow the convention "Your Movie Title - iTunes Extras"
<key>playlistId</key>
<integer>123456789</integer>
<key>playlistName</key>
<string>Your Movie</string>
This is what ties it back to the movie file, we will come back to it later where in the movie MetaData you need to place this 9 digit string
<key>xid</key>
<string>TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC_ITUNES_EXTRAS</string>
This is the convention in how to properly xid your iTunes Extra, it is your movie's XID with "_ITUNES_EXTRAS" added to the end of it
<key>Name File</key>
<string>Your Movie - iTunes Extras.ite</string>
<key>associated-adam-ids</key>
<array>
<integer>123456789</integer>
The first is self explanatory but the second is again this 9 digit number that you will need to place into the meta data of your movie. It is what will make iTunes lace the two files together
<key>xid-asset-mapping</key>
<dict>
<key>TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC</key>
<array>
<integer>123456789</integer>
</array>
<key>TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC_ITUNES_EXTRAS</key>
<array>
<integer>987654321</integer>
</array>
</dict>
This is the last critical piece, it laces the two files tigthly together. Now the 9 digit number counting down from 9 is part of the unique ID of the iTunes Extra, the 9 digit number counting up from 1 needs to be put into the metadata of your movie. The annotation type for this is "contentID".
That's pretty much it. If you did it right your files will now appear as one file in cover view just like a movie bought in the store.
The easiest to do this right is to grab the manifest.xml and iTunesMetadata.plist from an iTunes store movie and copy paste and edit it for your purposes, which is what I did.
Cheers everyone!

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

HT204382 I just bought Quicktime MPEG - 2 to play MPG video files and still doesn't work. any suggestion?

I just bought Quicktime MPEG - 2 to play MPG video files and still doesn't work. any suggestion?

Please note:
If your Mac has OS X Lion, MPEG-2 functionality is built in and the QuickTime MPEG-2 Playback Component is unnecessary.
QuickTime MPEG-2 Playback Component for Mac OS X - Apple Store (U.S.)

Mp4 video files convert to QT for import

I have mp4 video files and I'm trying to import them into FCP but they are unrecognizable. What is the best way to convert them?
J

Probably DV-NTSC or DV-PAL depending on where you live.
What is the delivery mechanism?
x

File and printer sharing for Microsoft Networks on Windows server 2008

Hi Expert,
I found that the properties of File and printer sharing for Microsoft Networks service disabled after I install the windows server 2008 64bits. I tried to install that service via adding the file and printer sharing services in the properties of local area connection, but it doesn't contain any service in the popup box. Also, no such service file available in the disk when I tried to install the service from installation disk of windows server 2008 64bits. Is the file "sacsrv.dll" corresponding to the service name of file and printer sharing? I found it is in the directory of "Windows\system32". I have no idea about where is the problem? Do I miss some components? Please tell me what can I do for it? Thanks!
Best Wishes,

Do any experts know the reason of this problem? Thanks!

Script to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks

Hi, I am trying to find a way of using a batch file or vbscript to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks on a Network Interface Controller.
I've done some searching on the internet and I can see some suggestions to locate the Setting ID of the NIC and then remove the value from the "Bind" string under "HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Linkage" and "HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Linkage"
I tried this but it didn't seem to uncheck itself from the NIC properties under NCPA.cpl
Can someone help me?

http://social.msdn.microsoft.com/Forums/vstudio/en-US/b0407073-07bc-462b-9de9-7295be5fa183/disable-file-and-printer-sharing-for-mircorosoft-networks?forum=csharpgeneral
¯\_(ツ)_/¯

How to uncheck File and Printer Sharing for Microsoft Networks by Command!!

Dear everybody,
I meet a problem with my System now, and I need your help!!!
As mentioned in title, I need uncheck on File and Printer Sharing for Microsoft Networks by Command for Security purpose.
Could you show me the way to do it by command line
I think GPO can solve this but My Boss want to do it by command line
Thanks for your help!!!

netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes
netsh advfirewall firewall set rule group="File and Printer Sharing" new enable=Yes
To disable these functions in Windows, use the same command and replace 'Yes' to 'No' in the above commands.

X301 "File and Printer Sharing for Microsoft Networks" removed at re booting (XP SP-3)

Even if I run the “Network Identification Wizard” (under System properties/Computer Name) to join a Workgroup, the box ‘File and Printer Sharing for Microsoft Networks’ remains unchecked. If I ticked it manually, it remains checked for the current session, but it is unchecked at booting.
The same occurs with the Windows Firewall (I am running that from Symantec). I switch the Windows Firewall off, but after rebooting, it appears selected again!.
This happens only with my brand new ThinkPad X301, which came with Vista. The package included a kit to convert to XP, but this installed a ‘naked’ XP, which required downloading from Lenovo and Windows about 1Gb of files (bad service, Lenovo guys!).
I wonder which “safety” issue of the X301 causes this, but how can I stop this happening? (It does not occur with any of my two old ThinkPads, also running XP SP-3 and Lenovo software).
Solved!
Go to Solution.

See -> http://www.vistax64.com/vista-networking-sharing/72537-file-printer-sharing-turned-off-reboot.html Here is the text. Re: File and Printer sharing turned off on reboot
I FOUND MY SOLUTION!!!
In my case, it was in Lenovo's "ThinkVantage Access Connections" applet. It
is additional security that is applied at the CONNECTION level.
Here is how I fixed it:
1. Double click on the ThinkVantage Access Connections applet in the
notification area.
2. Click on the MANAGE button on the toolbar
3. Select the SSID where you want File Sharing to work, and click EDIT
4. Click on the ADDITIONAL SETTINGS tab
5. Next to "Network Security", click the SETTINGS button
6. The first option in Security Settings is "Disable file and printer
sharing". UNCHECK this box. Click OK for 3 levels of dialog boxes, then
close Access Connections
Although these directions are specific to ThinkPad notebooks, the same
principle may apply for other manufacturers' connection managers.
Best of luck!

File and Printer Sharing for Microsoft Networks is missing

I have a Server 2012 Hyper-V VM that is missing the File and Printer Sharing for Microsoft Networks. When I try to Install the service it is not listed. The only service listed is Windows Network Virtualization Filter driver. I have the install media but
I don't know where the driver would be located. I'm hoping someone can tell me where it is located.
Update:
I am trying to run Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server but it's not working and it's giving me this error.
Enable-NetAdapterBinding : No matching MSFT_NetAdapterBindingSettingData objects found by CIM query for instances of
the ROOT/StandardCimv2/MSFT_NetAdapterBindingSettingData class on the CIM server: SELECT * FROM
MSFT_NetAdapterBindingSettingData WHERE ((Name LIKE 'Ethernet')) AND ((ComponentID LIKE 'ms[_]server')). Verify query
parameters and retry.
At line:1 char:1
+ Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (MSFT_NetAdapterBindingSettingData:String) [Enable-NetAdapterBinding], C
   imJobException
    + FullyQualifiedErrorId : CmdletizationQuery_NotFound,Enable-NetAdapterBinding
Vincent Sprague

Ok, fixed it, I found the netserv.inf file in c:\windows\inf and tried to use it to reinstall File and Printer Sharing. However File and Printer Sharing was not listed. I copied the netserv.inf file from another Server 2012 VM and was able to install File
and Printer Sharing using the copied NetServ.inf. After rebooting the server I was able to access network shares on the server.
Vincent Sprague

Avinaptic,a powerful video file (and DRF) analyzer for testing

Similar Messages

Maybe you are looking for