Avoid Country code in CRM

HI All,
I am facing issue with Automatic addition of country code to the Phone number which we recieve from Interface. Our client wants Users themselves will add country code and we should disable automatic addition of country code based on Country. I went to Setting under IMG--Sap webapplication server-Set Country codes there I tried to remove country code but then it was disabled for all interface. My problem is for particular interface they want to disable it but for other interface then want CRm to add country code. Can anyone help me with this.
Many thanks,
Ashutosh

Hi Praveen,
There was nothing much we did in CRM. We had XI so we decided to handle it at XI level. Even if CRM adds country code to the number while sending it back XI will chopp off country code and send it to interface.
Regards,
Ashutosh

Similar Messages

AT THE TIME OF CRETION OF BP IN CRM HOW GET COUNTRY CODE ATUMATICALY DISPL

hello friend my requirement is at the time creation of bp in crm with instead of manually selection in country code system want pick automatically and display as a display field (not editable to change)
HOW IT IS POSSIBLE and what are things need to do this.
if any one knows please reply
bindhu

Hi Bindhu,
1. You are able to see country field populated by default since for your user the parameter LND has been set to a default value.
To check the same go to transaction SU01, put your username and enter. Select tab Parameters, in column Parameter Id there must be an entry for LND and default value must be assigned to it.
You can also see the same in System-> User Profile --> Own data.
2. The field is in display mode because of field groupings.
In transaction SPRO
SAP Implementation Guide -> Cross-Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Field Groupings
For one of the option here Address: Country must be set to display. e.g Configure Field Attributes per Activity
Here choose Create, for dataset Addresses, field group Address: Country must be set to display. If not check in others.
If the above 2 are not found, even Badis can be responsible for the same.
Wish this helps.
Regards,
Shalini Chauhan

Add country code to phone number automatically

Does iCloud Contacts have the ability to add the country code automatically in front of phone numbers:
e.g. if a phone number is stored as (212)555-3270; does iCloud have a batch update option where it can convert the number to +1(212)555-3270; The user may allow this automatically OR ask to be prompted.

Is there a way for me to automatically add the country
code before the phone number for all the contacts
that do not have it?
First, you must have stored somewhere what country each phone number is for. Without this, no automatic method will work.
The obvious place is in the "country" field of each Address Book entry, but keep in mind that you can have multiple addresses & multiple phone numbers for each contact, & it is possible one contact could have addresses and/or phone numbers in more than one country. This makes the problem much more difficult, particularly if there are different labels for different ones of each. (IOW, you could have an "office," a "direct," a "mobile," & a "home" phone, & a "work," a "home" & maybe even a "cabin" or "2nd home" address, not necessarily all in the same country or with an obvious address/phone relationship.)
You also would need to test each phone number to make sure it did not already have a country code entered (to avoid double codes), & some way to mark or otherwise handle entries without a country entry in any address field, with uncertain address/phone relationships, etc.
It is possible to do all this with Applescript, but frankly, even if you already knew a fair amount about scripting, it would probably take you longer to write, debug, & verify the results of applying the script than it would to go through 300 entries by hand, particularly if you use the search box or smart groups to go through the contacts one country at a time.
However, no matter what you try, you can guard against data loss by backing up the Address Book before you start (File -> Backup Address Book) & restoring from the backup if something goes wrong.

County Code and City Code in CRM

Hi Guru,
We are having big issue now. Our CRM is fully integrated with ERP, our user want to have the county code and city code in CRM customer master creation. Seems these two fields are not available in CRM, please advice.
Rgs, Michelle

Hello Michelle,
IN BP Transaction code if you expand the Addess Tab you will find "City/State/ZIP Code"
Here you will get City code.
You can use ZIP Code to map the Country code.
Regards,
Rajendra Sonawane

How to find out the user Country code in flex

Hi all,
I want to find out the country code, to load dynamic localization swfs.
example : my swf file name
en_US_res.swf
by using capabilities.langueage am getting the local user langueage, am not able to find the locale country code. please help me out
Thanks!!

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How can I use iCloud-keychain if i can not find my country in the country code list?

How can I use iCloud-keychain if i can not find my country in the country code list?

Welcome to the Apple Community.
If your country code does not appear in the list…
Go to System Preferences > iCloud > Keychain and enter your Apple ID password (Settings > iCloud > Keychain, from a mobile device)
Select the ‘Create Different Code’ option. (Mobile devices only)
Select the advanced option and choose whether to create a random code or no code, selecting the later allows syncing across devices but not with Apple’s servers.

Satellite L750D - Cannot register warranty due to country code

Unsure if this is an appropriate question BUT...
I am trying to register my L750D Notebook for warranty and it will not accept my country code.
I live in Australia so the country code is 61. I live in South Australia - code 8 and my phone number is 83xxxxxx.
So I have tried to put the code in as 61 then 8 then 83xxxxxx but it will not accept it.
Would anyone know what I am doing wrong?
I have also tried about 30 other ways of doing it?
Kind regards
Felicity,

Hi mate
Did you try to register the warranty on the right Toshiba page?
Please check this Toshiba Australia warranty registration webpage:
http://www.mytoshiba.com.au/support/warranty/statements
Please post feedback!

CUCM 8.6.2 Generating CSRs With Incorrect Country Code

Hi folks, I'm running CUCM 8.6.2.25900-8 on a single cluster (1x pub, 4x sub). My CA certs for the tomcat service are due to expire shortly so I've generated CSRs for all the servers and submitted them to our provider. All but one of the requests went through with no issues but one failed because the CSR specified a country code of 'US'. We are in the UK and the four other servers all generated CSRs specifying C=GB.
Examining the current tomcat cert or issuing "show web-security" on the command-line of the server who's CSR failed also show 'C=GB'
Looking at the 'set web-security' command it appears that I cannot change the country code.
Why is the server generating CSRs with 'C=US'?
How do I change this behaviour such that they are generated with 'C=GB' instead?

Surprisingly, it has made it all the way to 10.5(x) with the same info and the same error...
I did found a method to change it via root access, and you might not require root access, but I can't tell for sure as I would need to look at exactly what the contents of the file that TAC changes, but apparently it's just the platformConfig.xml that they need to change and reboot.
If that's the case, using the utils import config using pretty much all the same info, except the country, would end up with the same outcome.
Again, not 100% sure but theory says that should do the trick, you can run that thru TAC if you open the case and see what they think about it.

How can I make local calls without using a country code when it's in my Contacts?

The phone numbers in my Contacts all contain country codes because I do a lot of travelling.
An example of this might be:
+1 (229) 123-4567
+44 (0)12 345 6789
+31 (0)10 2345 6789
I have an unlocked phone so when I travel, I usually pick up a local SIM and use that to make calls.
The problem I have is that when I am abroad and select a phone number from my contact list it doesn' work. For example, if I select a contact with the number:
+31 (0)10 2345 6789
A voice-recording comes on saying that the number I had dialed was incorrect.
But when I dial the number manually:
010 2345 6789
It works.
In the US I do not have this problem because for some reason, the phone knows whether the +1 is needed or not. I'm sure if it uses it at all when you're in the US. When I dial internationally from within the US, the number dialing works fine.
So this problem only occurs when I'm dialing locally in the country I'm in while travelling outside the US.
Anyone have any idea of why this is happening and more importantly, what I need to do to fix this? I would hate to have go and change all my contact numbers and get rid of the country codes. If I ever have to call those numbers internationally, I'll need to manually add the country code back in.
Very annoying!
Advice anyone?

If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789

How do I add the country code to all contacts when it did not previously appear?

I just moved from the US to the UK and purchased a new iPhone 4S. When my contacts migrated from Outlook to the iPhone they did not include the country code in the US and therefore all contacts numbers are now listed incorrectly. How can I add the country code to hundreds of contacts painlessly?
Thanks in advance.

International Assist is activated. Upon further review this appears to be a case of the original country codes not being added when the contact list was constructed. iOS has not figured this out and thus when changing countries I've been forced to add the country codes to every contact record manually. Disappointing and very labour intensive. If only Apple allowed for a macro that simplified the mass change.

How can I call contacts from my list without the country code that is registered with that contact?

I have all my contacts registered with a country code. When I want to make calls from my iphone, I do not want the phone to dial the country code, but only the area code. How can I make that happen?

Your 3G backup contains your contacts already, you don't need to sync them to Outlook or anything just restore the backup file from the 3G onto the 4S and you should be good to go.
This kb article should help:
http://support.apple.com/kb/ht1414

Not able to create a customer master record with US as the country code

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is *NO JURISDICTION CODE* COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
I have checked the field in the account group(OBD2) but tax code is in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message,
but when I tried checking the settings for a different company code's customer data base (us in county code)
I can see that there is a number mentioned in the address tab under tax jurisdiction field (beside time zone) which is not populating for this company code.
So, do anyone know where exactly we mention this number so that it populates in that field of address.
Hope am clear.
hope to receive a solution
thanks & regards
vinila

Hi,
You need to maintain the JURISDICTION CODE for country US. This JURISDICTION CODE code mainatanance purely FI/CO part.. it depends on the country's tax procedures.. Better take the help from your FI/CO consultant..
Menu path for Defining tax jurisdiction code
IMG -- Financial accounting -- Financial accounting global settings -- tax on sales and purchases -- basic settings -- define tax jurisdiction
reward if helps
Muthu
Edited by: Muthupandiyan on Mar 14, 2008 11:09 AM

I recently moved from the US to Sweden and all my contacts are saved with their international country code prefixes. I keep getting text message errors when I send a text, but the contact info is stored correctly for each. How can I fix this?

I receive an error message that adds the country code again. I tried it with no country code and the area code included but I still receive an error message. It only does it sometimes and not to all Sweden contacts. There is no obvious reason why it does it to some but not others. Does any know what the problem is and how to fix it? Thank you!

Only other thing I can suggest is to reset your phone. This won't touch any data or settings:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

T-code in CRM 5.0 for component detail ? ( corresponding to bsp_wd_cmpwb)

Hi,
How are you?
I need a help If anyone who has worked on CRM 5.0.
In CRM 5.2/CRM 7.0, particular component detail can be seen through u2018BSP_WD_CMPWBu2019 transaction code.
What is corresponding transaction code in CRM 5.0? Through u2018BSP_WD_WORKBENCHu2019 tcode it ask for bsp application and shows all the views.
For particular view (say Add printer), how can I see corresponding component detail in CRM 5.0.
Thanks,
Amit

hi,
you can see the View name as Tool Tip, if you add the parameter CRM_ICWC_TEST with value 0x23456789 to your user(Tx: su01).
after adding the parameter, put the cursor on Header names, then it will show the view name as tool tip.
regards
Ismail

Creation of new country codes - Serbia.

The business user is not able to find country code for Serbia in production system.
We are currently using SAP ECC 6.0.
I have refered the SAP note no 603152 for creating country code .
Their are two alternatives available to fix it:
1. Manual creation of country code in the system. We need to maintain additionally the currency also in the system. Note: I do not know the implication of manual creation of country code in SAP sytem. As Country codes are used by many tables.
2. If we need new country codes for country settings of Serbia.
Then it can be done by using new SAP Basis (Netweaver) releases from release SAP_BASIS 710 or appropriate support pack. Then country precustomised setting of serbia can be done by upgrading support pack of basis.
The above alternatives are available. As country code is an important aspect & maintained at client level.
Please let us know which alternative would be suitable, Why.

I would recommend the basis way.
If you go the manual way - Go to T Code OY01.
Thanks,
Nandita

Avoid Country code in CRM

Similar Messages

Maybe you are looking for