Avoid Livecache Lock during process chain execution

Hi All
I have a situation where the DP planners in Asia geographies have a lockout in planning books due to process chain exceutions in US evening time.
Have you come across any such situation where lock out due to process chain execution can be removed/reduced
It will be really helpful if you can provide some inputs on this

Hi Vijay,
Probably you have a program to lock all users. You can contact your ABAP team, to change the code, so that the user group maintained in a table (Z) to be excluded out of locking.
We have this type of program in our project, but your code might be different from ours.
Let me know if you want further information...though I cannot share the entire code with you.
Regards
JB

Similar Messages

Process chain execution error

Hi Experts,
I used to run Process chain on daily basis.During Process chain execution time ,R/3 server was down as a result Process chain is not executed at initial stage itself as a result i got yellow color symbol at one process(Infopackage-delta load).
I triggered that process by FM RSPC_PROCESS_FINISH as a result all the successive Processes executed successfully except triggered Process(InfoPackage).
One of the Expert suggested me to check job ,TRFCS which i failed to trace.
The Process(Infopackage-deltaload) which is in yellow color later turn into Red color.
Now I trigger process chain by "Repair" option as result i got duplicate at that process which is very common apart from that i got duplicates in all successive processes also. Lets say that A and B are successive Processes where as A1 and B1 are duplicates
A A1
B B1
After second successful Process chain execution including Infopackage i found links between A and B,A1 and B1.
Apart from this i found cross link(X) between the above links.
I checked records in all DSO in Process chain which contains two records with numbers in both records at that day where as infopackage containing two records one with red color symbol and other with number.
My question is as infopackage is deltaload is there any effect in getting duplicates in successive processes as they are executed two times in a day.
Thanks&Regards,
narasimha.

Hi Narasimha,
If the Infopackage is set to Delta then there is no chance of getting duplicate records, Delta will bring only the changed/New records. if you have any dought you can check the data in PSA level...

Help! about process chain execution status

hi:
we nearly have one problem about the process chain execution status,
when error occured during process chian execution, we fixed it in time,
however, even the error repaired, its status still showed yellow, and this
stop the subsequent process to excute.
Any body who can provide some help to solve this problem? thanks in advance
and looking forward to one reply.

Hi ,
Try this method
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like
described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Regards,
Ravi

ALEREMOTE LOCK at Process chain level

hello experts,
Please suggest me to resolve this ALEREMOTE LOCK at process chain level.
Because of this the chain is failed at different process levels.
the below mentioned is the job log.
Job tarted
Step 001 started (program RSPROCESS, variant &0000000464318, user ID ALEREMOTE)
Object requested is currently locked by user ALEREMOTE
Entire chain now has status 'R'
Process Generate Index, variant Generated from LOADING ZPAK_3TLYNXGWP514GLCXQ33XDE has status Undefined (instance )
Process Execute InfoPackage, variant PC : Quotation NA to Pipe has status Undefined (instance )
Process Start Process, variant Start Hist and Pipe load has status Completed (instance 4B15FK2YHXC7EW1D221A4EHIM)
Process Local Process Chain, variant 6660 ZSDC2ABC has status Successfully completed (instance 4B14MFS6APTW94XB79A4MSTV2)
Process Delete Index, variant Generated from LOADING ZPAK_3TLYNOIAKRPCQAO2X0DLN4 has status Successfully completed (instance DIDX_4B16EOQH4JK3BMJ41536QIHPQ)
Process Execute InfoPackage, variant PC : Quotation NA to Historical has status Successfully completed (instance REQU_4B180R5J6D8OIIEK0S9K0OH0U)
Process Generate Index, variant Generated from LOADING ZPAK_3TLYNOIAKRPCQAO2X0DLN4 has status Successfully completed (instance INDX_4B18Q9XP4GQZLL7LXGI5JYFXQ)
Process Delete Index, variant Generated from LOADING ZPAK_3TLYNXGWP514GLCXQ33XDE has status Undefined (instance DIDX_4B18CADCFC1SL10FHBFZ7ZINI)
Termination of chain has been reported to meta chain 4B154CLBHDTKWHZEYFNE6RWOE
Job finished
Additional information::
For the fisrt month - Error occured in block load infopackage
Message text:Process Execute Info Package, variant PC: Quotation NA to Pipe has status Ended with errors (instance REQU_49OKKAVXV8WM75XY9268J
Second month - Error occured in block load infopackage(same as last month)
message text:Process Execute Info Package, variant PC: Quotation NA to Pipe has status Ended with errors (instance REQU_4ACQBCYASM88BVNSCWVG6
Fourth month - error already in the first load
Message text:Process Execute InfoPackage, variant PC : Quotation NA to Historical has status Ended with errors (instance REQU_4APCZRLE8E4BAY0
Fifth month - error in the "delete indexes" step
Message text: Process Delete Index, variant Generated from LOADING ZPAK_3TLYNXGWP514GLCXQ33XDE has status Ended with errors (instance DIDX_4B1.
Thanks in advance
Edited by: S MB on Sep 9, 2008 12:01 PM
Edited by: S MB on Sep 9, 2008 2:29 PM
Edited by: S MB on Sep 9, 2008 2:31 PM

Thanks for replies.
Its a issue related to Transaction data(No master data is in these PC loading).
Any body let me know is there any TCode available in BW to see all jobs which are running on a specific CUBE / ODS.
I mean...How can we come to know the jobs(all jobs in a same time) which are running on a perticular CUBE/ODS?
Instead of SM12 & SM58
Thanks in advance.
Edited by: S MB on Sep 10, 2008 7:32 AM
Edited by: S MB on Sep 10, 2008 8:02 AM
Edited by: S MB on Sep 10, 2008 8:08 AM
Edited by: S MB on Sep 10, 2008 10:58 AM

How to follow process chain execution history

Hello All;
I need to follow all process chain execution history, is there any way to follow a process chain execution for example over a week ?
Example :
Day 1 PC failes
Day 2 PC success
Day 3 ...
Day 4 ...
Day 5 ...
Regards
Anis

Go to tcode RSPC and open your process chain and select log view icon .
check the logs as follows

Error in Process chain execution.

Pls, i'm getting the following error with my process chain.
Error TEXT : *************** From HERE ***********
WARNING 914 *** EEWO0914W An internal error has occurred. Either the joblog or the job protocol for the following job does not exist:
Job name: !1
Job ID: !2.
+++ EEWO1016I The Process Chain has been stopped:
Error Text : *************** Till HERE ***********
What is process chain doing : The process loads data from legacy (oracle db) into ODS and then splits data into 2 cubes, with ODS activation, drop indexes, create indexes, delete PSA at proper places. The PC is called from a maestro job (TWS Agent : Tivoli Work Scheduler agent). The TWSA simply calls the PC with no processing at it's end.
Fyi, When i look at the BW logs, the PC is a success (green), with all data loaded successfully. In the last step of the PC, i'm creating a txt file (0 byte file) on the server. Even this file is created with correct time stamp (as per log).
However the TWS reports back the above mentioned error.
The last message, just before the error is :
07/24/2010 17/46/37 RSM1 797Start InfoPackage ZPAK_3XYD134H7BSESPB0MRTCGHNOE
For the past few loadings, this behaviour has been consistent. Could anybody give some lead on this.
Regards,
Nagendra.

Hi,
Please implement the following two notes to your system:
1460640 Correction: Synchronous run turns red during log refresh
1396417 Correction: Status "Red" if request does not exist yet
As the execution of the chain goes well on the backend, and the issue
is only reported by the 3rd party program, please get in contact with
the supplier of the TWS. Normally the external schedulers like uc4 using the
rspc_api_chain_start to start the process chains, and the function
module RSPC_API_CHAIN_GET_STATUS to receive the current status
information about the corresponding runs.
Thanks & Regards,
Vipin

Subject: Continue Process Chain Execution Despite a Process Type Failure

My process chain is made of several process types; process type 1, process type 2, etc.
Generally if a process type fails, e.g., process type 1 failed, subsequent process types are not executed.
1. Is it possible to continue to execute process type 2 despite errors in type 1.
2. If process type 2 was an ABAP program, is it possible to get in this program whether process type 1 was success or failure because I want to do certain things only if process type 1 was a failure,

Hi,
Here are my answers,
1) Is it possible to continue to execute process type 2 despite errors in type 1.
It is possible to execute subsequent process even if the process fails.
when you are developing the process chain, whilee connecting processtype1 and processtype 2, a popup appears with three optionhs "success", "failure", "always".
select "always" in your case.
If you are asking about the process chain already developed, go to edit mode, removelink between process1 and process2 and follow above steps.
*2) If process type 2 was an ABAP program, is it possible to get in this program whether process type 1 was success or failure because I want to do certain things only if process type 1 was a failure *
let me assume that you want to run programA if process1 is succesful and programB if process1 fails.
include programA in process2 and ProgramB in process3
connect process1 to process2(ProgramA) and select "success" n the popup
connect process1 to process3(ProgramB) and select "failure" in the popup.
hope this helps you,
please let me know if you need any more information.
Regards,
Sri...

Process chain execution using program

hi,
i want to run process chain 10 times using a program.
can any one tell me how to write a program in pc in order to run the chain 10 times.
any example of running the process chin using program .any nice code will be really useful
please suggest me.
i will assign points

Hi Venkat,
Go to SE37 input CHAIN F4 then you will get various function module that can be used for process chain.
IN you program call the function module RSPC_CHAIN_EXECUTE_REMOTE pass the required parameters and exceute.
Test throughly in DEV system before moving to PRD. I have not used this earlier.
Hope this helps.
PV

Raising an alert at the end of process chain execution

Hello ,
I have a requirement, where I have to raise an
alert(not an e-mail) in Alert Server at the end of data loading process through a process chain.
Is there solution for above requirement?.
Regards
MB

Hi ,
Thank you for taking time and answering my question.
I have found a solution to raise the alert at the end of loading a target through process chain.
Solution :
There is no out of the box option to raise the alert from process chain.
SAP has given a SALRT_CREATE_API function to raise the alert. We have used this function with "ABAP process type" in process chain to raise the alert.
Madhukar

Suspending process chains execution

Hi All,
How do we suspend process chains running for a given period of time.
We have some process chains scheduled to run daily and some only on weekends.
Is there a way to suspend the process chains for sometime and then resume then. I do not want to unschedule them and reschedule them which is painful. Is there a simple way of suspending and resuming the process chains. Please clarify.
Thanks
Karen

Hi just create a programm using RSPC_API_CHAIN_SCHEDULE FM and schedule process chain as per your requiremnt.
or... use this way which is copied from this forum..
Schedule process chain
Your problem can be solved by creating the factory calender ID mentioning only saturday and sunday in the tcode SCAL. Im not sure whether you will have access to this tcode. You can create it with the help of Basis team if you dont have authorization.
Steps for creating factory calender ID mentioning sat and sunday only
1. Goto SCAL Tcode
2. Select Factory Calender and then click on change
3. Click on create to create new factory calender id
4. Give Factory Calender ID (EX : ZS) and give description
5. Select Holiday calender ID
6. Uncheck all days expect saturday and sunday.
You can make use of this factory calender id in the process chain scheduling job.
Steps:
1. Open the start variant of the process chain
2. Click on define scheduling details
3. Select other period option from period values in the start variant of the process chain and define every 30 mins.
4. Click on Restriction and Give the factory calender id (ZS) which you created in the scal so that the process chain can be executed only on saturday and sunday

RPE-01008 & RPE-01009 during Process flows execution

Hi,
I run a daily process to refresh my warehouse. This process is made up of a fairly large process flow package that calls up to 40 processes. I often get the RPE-01008 & RPE-01009 errors. Like I was advised previously, I checked the <OWB_HOME>log directory and got the following extract:
22:48:03 [66718] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
22:48:03 [66718] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.PLSQL'
22:48:03 [6F1474] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
22:48:03 [6F1474] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.PLSQL'
22:48:03 [66718] PLSQL callspec: declare l_env wb_rt_mapaudit.wb_rt_name_values;function bool_to_char (val boolean) return varchar2 is begin if (val is null) then return null; else if (val) then return 'true'; else return 'false'; end if; end if; end; begin l_env(1).param_name := 'AUDIT_ID'; l_env(1).param_value := 711240; l_env(2).param_name := 'OPERATING_MODE'; l_env(2).param_value := '3'; l_env(3).param_name := 'MAX_NO_OF_ERRORS'; l_env(3).param_value := '50'; l_env(4).param_name := 'COMMIT_FREQUENCY'; l_env(4).param_value := '1000'; l_env(5).param_name := 'AUDIT_LEVEL'; l_env(5).param_value := '2'; l_env(6).param_name := 'BULK_SIZE'; l_env(6).param_value := '50'; ? := MAP_BILL_CLIENT_LINK.main(p_env=>l_env);end;
22:48:04 [6F1474] PLSQL callspec: declare l_env wb_rt_mapaudit.wb_rt_name_values;function bool_to_char (val boolean) return varchar2 is begin if (val is null) then return null; else if (val) then return 'true'; else return 'false'; end if; end if; end; begin l_env(1).param_name := 'AUDIT_ID'; l_env(1).param_value := 711248; l_env(2).param_name := 'OPERATING_MODE'; l_env(2).param_value := '3'; l_env(3).param_name := 'MAX_NO_OF_ERRORS'; l_env(3).param_value := '50'; l_env(4).param_name := 'COMMIT_FREQUENCY'; l_env(4).param_value := '1000'; l_env(5).param_name := 'AUDIT_LEVEL'; l_env(5).param_value := '2'; l_env(6).param_name := 'BULK_SIZE'; l_env(6).param_value := '50'; ? := MAP_FLAG_SUBTOTALS.main(p_env=>l_env);end;
23:15:03 [5DD521] java.lang.OutOfMemoryError
<<no stack trace available>>
23:15:03 [5DD521] report_execution_result auditId=710262
23:15:04 [5DD521] java.lang.OutOfMemoryError
<<no stack trace available>>
23:15:05 [5DD521] oracle.wh.runtime.platform.service.controller.RecoveryInProgress: RPE-01008: Recovery of this request is in progress.
at oracle.wh.runtime.platform.service.controller.AdapterContextImpl.initialize(AdapterContextImpl.java:974)
at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:770)
at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:76)
at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
at java.lang.Thread.run(Thread.java:484)
23:15:06 [5DD521] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
23:15:06 [5DD521] oracle.wh.runtime.platform.adapter.rtp.AbortedDueToSystemFailure: RPE-01009: Completion of this task could not be completed due to an earlier system failure.
at oracle.wh.runtime.platform.adapter.rtp.NativeExecutionAdapter.execute(NativeExecutionAdapter.java:22)
at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:63)
at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:76)
at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
at java.lang.Thread.run(Thread.java:484)
23:15:07 [237368] AuditId=710262: Request completed
23:15:10 [237368] AuditId=711260: Processing execute request
23:15:11 [3508DA] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
23:15:11 [3508DA] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.PLSQLProcedure'
I see it is an out of memory error. Please how do you suggest we handle this error?
I will really appreciate as prompt answer as it is impacting on timelines.
Thank you.
Warmest Regards,
Ademola Rotimi,
EDW, MTN Nigeria.

I see the out of memory error which suggests that the runtime service is running out of memory. You can try to increase the memory allocated to the RTS.
To stop/start the runtime services manually, please execute stop_service.sql or start_service.sql from <OWB HOME>\owb\rtp\sql directory. You must run this from the runtime repository DB user. To check the status of the runtime service, please use the service_doctor.sql script in the same directory.
To increase the runtime memory, first stop the service by running stop_service.sql from the runtime repository schema, then editing the file <OWB HOME>\owb\bin\win32\run_service.bat (for Windows systems) or <OWB HOME>/owb/bin\win32/run_service.sh for unix systems. In this file, please change the parameters at the bottom. Instead of:
${JAVAEXE} -Xms64M -Xmx256
put
${JAVAEXE} -Xms256M -Xmx1024
or as much as the platform memory allows.
Regards:
Igor

Process Chain remote execution locks up (All Dialog Processes used up)

Hi,
We have the following task at hand. We kick in BW process chain execution via RFC from our R/3 system using the function described below. What happens is that the process chain does get kicked in the remote BW system, but it quickly locks up. System monitor says that all dialog process have been utilized. So, basically it gets stuck in the beginning of the process chain. Is there anything I can do to prevent this from happening?
Here is the function call:
This function triggers execution of process chain
(on the remote BW system)
CALL FUNCTION 'RSPC_API_CHAIN_START' DESTINATION p_rdest
    EXPORTING
      i_chain             = p_pchain
I_T_VARIABLES       =
      i_synchronous       = 'X'
I_SIMULATE          =
I_NOPLAN            =
    IMPORTING
      E_LOGID             = gv_pchain_logid
    EXCEPTIONS
     failed              = 1
     OTHERS              = 2
Thank you,
AG
Message was edited by:
        AG

How many work process did you configured in SOLMAN, what is the action that CSMUSER is busy with?
I think CSMREG is a communicatino user to satellite agents and check the RZ21--> AGENT status.
Regards
SM

Authorizations setting for running the process chain

Hai
Iam planning to run the process chain for loading the data into ODS. But i dont have authorization for it.
so what are the authorizations i need to run the process chain in my system. And how can i set all those authorizations to my user-id. I have all authorization rights .
Pls let me knw
kumar

Hi,
Authorizations for Process Chains
Use
You use authorization checks in process chain maintenance to lock the process chain, and the processes of the chain, against actions by unauthorized users.
·        You control whether a user is allowed to perform specific activities.
·        You control whether a user is allowed to schedule the processes in a chain.
The authorization check for the processes in a chain runs when the system performs the check. This takes place upon scheduling or during synchronous execution. The check is performed in display mode. The check is performed for each user that schedules the chain; it is not performed for the user who executes the chain. The user who executes the chain is usually the BI background user. The BI background user automatically has the required authorizations for executing all BI process types. In attribute maintenance for the process chain, you can determine the user who is to execute the process chain.
See also: Display/Maintenance of Process Chain Attributes ® Execution User.
Features
For the administration processes that are bundled in a process chain, you require authorization for authorization object S_RS_ADMWB.
To work with process chains, you require authorization for authorization object S_RS_PC. You use this authorization object to determine whether process chains can be displayed, changed or executed, and whether logs can be deleted. You can use the name of the process chain as the basis for the restriction, or restrict authorizations to chains using the application components to which they are assigned.
Display/Maintain Process Chain Attributes
Use
You can display technical attributes, display or create documentation for a process chain, and determine the response of process chains during execution.
Features
You can display or maintain the following attributes for a process chain:
Process Chain ® Attribute ® ...
Information
Description
( Rename)
You can change the name of the process chain.
Display Components
Display components are the evaluation criterion in the process chain maintenance. Assigning the process chains to display components makes it easier to access the chain you want.
To create a new display component, choose Assign Display Components in the input help window and assign a technical name and description for the display component in the Display Grouping dialog box that appears.
Documents
You can create and display documents for a process chain.
For more information, see Documents.
Last Changed By
Displays the technical attributes of the process chain:
·        When it was last changed and who by
·        When it was last activated and who by
·        Object directory entry
Evaluation of Process Status
If you set this indicator, all the incorrect processes in this chain and in the overall status of the run are evaluated as successful; if you have scheduled a successor process upon error or always.
The indicator is relevant when using metachains: Errors in the processes of the subchains can be evaluated as unimportant for the metachain run. The subchain is evaluated as successful, despite errors in such processes of the subchain. If, in the metachain, the successor of the subchain is scheduled upon success, the metachain run continues despite errors in unimportant processes of the subchain.
Mailing and alerting are not affected by this indicator and are still triggered for incorrect processes if they have an upon error successor.
Polling Indicator
With this indicator you can control the response of the main process for distributed processes. Distributed processes, such as the load process, are characterized as having different work processes involved in specific tasks.
With the polling indicator you determine whether the main process needs to be kept until the actual process has ended.
By selecting the indicator:
-         A high level of process security is guaranteed, and
-         External scheduling tools can be provided with the status of the distributed processes.
However, the system uses more resources; and a background process is required.
Monitoring
With the indicator in the dialog box Remove Chain from Automatic Monitoring?, you can specify that a process chain be removed from the automatic monitoring using CCMS.
By default CCMS switches on the automatic process chain monitoring.
For more information about the CCMS context Process Chains, see the section BW Monitor in CCMS.
Alerting
You can send alerts using alert management when errors occur in a process chain.
For more information, see Send Alerts for Process Chains.
Background Server
You can specify here on which server or server group all of the jobs of a chain are scheduled. If you do not make an entry, the background management distributes the jobs between the available servers.
Processing Client
If you use process chains in a client-dependent application, you can determine here in which client the chain is to be used. You can only display, edit, schedule or execute the chain in this client.
If you do not maintain this attribute, you can display, edit, schedule or execute the process chain in all clients.
Process variants of type General Services that are contained in a process chain with this attribute set will only be displayed in the specified client.
This attribute is transported. You can change it by specifying an import client during import. You must create a destination to the client set here in the target system for the import post processing (transaction RSTPRFC) The chain is activated after import and scheduled, if necessary, in this client.
Execution User
In the standard setting a BI background user executes the process chain (BWREMOTE).
You can change the default setting so that you can see the user that executes the process chain and therefore the processes, in the Job Overview. You can select the current dialog user who schedules the process chain job, or specify a different user.
The setting is transported.
The BI background user has all the necessary authorizations to execute all BI process types. Other users must assign themselves these authorizations so that authorization errors do not occur during processing.
Job Priority
You use this attribute to set the job priority for all of the jobs in a process chain.
Hareesh

Incorrect data after activating the request through Process chain.

Dear SDN chaps.
Today morning. I encountered a strange issue in DSO..
I have DSO which is updating from the AL11(application server) flat file.
While i am loading it to PSA there were no issues and after loading it to the DSO there is no issue and its passing through the routine and the data is populating properly in NEW data Table .But after successful activation of the request through process i am getting the wrong records in active data table.
Then i deleted the request and reran it manually i mean triggered the DTP and ran the manual activation surprisingly accurate records are coming through manual process..
I am just wondering why it is not working through process chain and why it is showing incorrect records through process chain execution and how it is showing accurate records through manual uploading process..'
Could some one please help to come out from this..By the way mine is SAP BI 7 SP20 &SP05 for BW 7.01
Thanks
K M R

Hi Pra
Thanks for your response..
We are doing PSA deletion and then we are uploading the data to PSA as well as DSO.
Now the issue is not in the part of loading we are facing the issue in Actiation of request if i am executing the activation through process chain it is sucess but the values are incorrect. If i am doing the manual activation it sucess with correct data.
Even i tried with a new chain but still i am facing the issue.
Surprise thing is in new data table the data is perfect in both the ways like manual upate and Process chain update only during activation i am getting incorrect record in the active data table..
Appreciate your help on this....
Thanks
K M R
Edited by: K M R on Jul 9, 2010 11:09 AM

Process chains time outs and hangs with no error msg - in SP13

Hi all,
We are having all kind of weird problems after we patched our system with SP13. Our process chain time outs and hangs, but surprisingly we never get any error msg. And scarier part is, the problem seems to be intermittent. PC runs fine on some days and hangs on some.
Further analysis into the dump as below
Termination occurred in the ABAP program "SAPLRSSM" -
in "RSSM_SLEEP_DEBUG".
The main program was "SAPMSSY1 ".
In the source code the termination point is in (Include) program "LRSSMU39".
This refers to an issue that appears to have been addressed by OSS Note
934648(meant for SP8). This notes also indicates to populate RSADMIN table to
exclude "RSSM_SLEEP_DEBUG". Not sure if this note is valid for SP13? However we went ahead and populated the RSADMIN table.
So now we have no clue whats going on and where to fix the issue.
As per SAP suggestion we applied the following notes:
0000653996 Analyzing lock situations
0000893563 Correction: Deadlock on completion of a remote chain
0000994007 Corrections: Deadlock with external status query
0001005481 Correction: Process successful, but there is no instance
0001047174 Correction: Incorrect scope when locking in process chains
0001051957 Correction: TIME_OUT during dialog confirmation of processes
0001083660 Report for error stack analysis
Nothing seems to help us. And SAP suggested a few options, which we implemented to no rescue.
Im sure that many of the customers have applied SP13, and want some feedback from them, if this is happening in their systems too?
If so, how did you fix this issue?
Or this situation is unique to us?Please note that no settings were changed as of SP13 to that of what they were in SP12(unless it is a side effect of the patch itself). Everything worked fine with SP12 and is still working on the BIP system. All the problems are in BIQ patched to SP13.
Any pointers or insight would be appreciated. We have a customer msg open with SAP, and going back and forth, but nothing seemed to work as of today.
Thanks,
Voodi

Not sure which OSS helped us get past the issue, as SAP asked us to apply a ton of notes. But along which the notes, SAP has some suggestions for us, which we think did the magic. After the implementation of the suggestin we never faced the same issue again. The suggestion by SAP:
move the process chain callback in a batch job by executing
program RSSM_TRACE_SWITCH and selecting the flag "verifcation
of asynchronous processes - execute in batch".
Lemme know if this doesnt fix the issue, I can give all the notes that SAP asked us to apply.
Message was edited by:
voodi

Avoid Livecache Lock during process chain execution

Similar Messages

Maybe you are looking for