Avoid multiple paths rpd part II

Hi,
after resolved "Multiple paths" problem, i explain you subsequent error message that Administration tool gives me.
I have following mapping:
I have following tables:
Entity (DIMENSION) - Entity_Relationship (DIMENSION) - HFM_Inventory (FACT TABLE) - HFM_Inventory (ALIAS) (FACT TABLE), HFM_Financial (FACT TABLE), HFM_Marketing (FACT TABLE) - HFM_Receivables (FACT TABLE).
My mapping in Logica Business Model is:
Entity -> Entity_Relationship
Entity -> HFM_Inventory
Entity -> HFM_Financial
Entity -> HFM_Marketing
Entity -> HFM_Receivables
Entity_Relationship -> HFM_Inventory (ALIAS)
When i link Entity_Relationship -> HFM_Inventory (ALIAS) , Global Consistency gives me following error:
Logical Table HFM_Financial has no a proper primary key defined. But in my opinion it's obvious because it's a fact table and not a dimension. What is wrong in my mapping?
Thanks
Giancarlo
Edited by: 832596 on 12-mar-2011 4.19

Hi Diney,
thanks for your reply. Following your suggestions, error message is disappeared, so i believe your reply was right. But now i have another problem that i explain in another post. I hope you can help me even in it
Thanks
Giancarlo

Similar Messages

Avoid multiple paths rpd

Hi,
i've following problem. I've 3 tables: A , B, C. In my Business Model Diagram they are mapped as:
A->B
A->C
Now i must insert an additional mapping B->C.
When i save rpd it gives me following error:
Multiple paths between A and C. How can i avoid this cycle?
Thanks
Giancarlo

Hi Diney,
thanks for your reply. Following your suggestions, error message is disappeared, so i believe your reply was right. But now i have another problem that i explain in another post. I hope you can help me even in it
Thanks
Giancarlo

3-1674105521 Multiple Paths error while using Bridge Table

https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
Teik

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

THIS SUCKS!!! Re:Multiple paths in FILE_DATASTORE path attribute

After 6 hours of struggle I managed to solve my problem. Everything was due to a stupid mistake (or incomplete documentation of intermediaText) on Oracle's part:
1. Pasted from Oracle8i interMedia Text Reference - Datastore Objects:
You can specify multiple paths for path, with each path separated by a colon (:). File names are stored in the text column in the text table. If path is not used to specify a path for external files, Oracle requires the path to be included in the file names stored in the text column.
2. Pasted from Oracle intermedia Text Manager online help:
Multiple paths can be specified for
path, with each path separated by a colon (:).
This is wrong at least on Windows based OS's. Fortunately, when everything else failed I tried with a SEMI-COLON (;) and worked. Go figure...

Please ask questions (or post statements) about Oracle Text (formerly interMedia text) in the Oracle text forum. Oracle text experts monitor the Oracle Text forum, you will get a quicker, more expert answer there.

Best way to achieve multiple paths with quizzes using Captivate 6?

I’m looking for the best way to achieve multiple paths and quizzes using Captivate 6.
Here is the scenario: The learner watches general slides 1 – 3 and then chooses between Path A, Path B, or both paths combined. If they choose Path A then they watch the A portion only and take the A Quiz only. Same happens for Path B and for the two paths combined. The learner would only have to go one path to complete the course.
What I’m finding is Captivate only has one Quiz results page (even if you create two separate quizzes, it merges them). I was trying to avoid having three separate projects for the same module to keep it simple. I see if I have three separate projects I could use the Multi-SCO Packager to merge them for use on my Moodle LMS. But wait, I don't have the elearning suite, so I don't have access to the Multi-SCO Packager...
My question is: What is the best approach way to accomplish this goal? Any recommendations?
Message was edited by: austingina

Captivate 6 has Branch Aware quizzing. Turn on that option in Quiz Settings and then your Quiz Results page should only show results for the branch your user visits.

DAQmx in Event structure / avoid multiple events

Hi all
I've started creating program for acquisition and analysis of data . I don't have much experience in LabVIEW, but it's important to me to start creating this application in good way. Can you give me some advice about things below?
I prepared template with Event structure, based on some article .
First question is how exactly place DAQmx blocks in it. Now they are all on one state of case structure "test", but I'm not sure that's correct because most of the example on NI side have initialization (like sample rate, number of saple) outside of the loop? It's important to make it possible to change parameter between measurements.
Second. How to avoid multiple events. In example: button TEST is pressed, measurement is taken. This measurement take a long time. I've started bored, and some other buttons (maybe TEST ) accidentally were pressed. When measurement is completed it would be good idea to destroy this events associated with accidently pressed buttons. It is possible to do it? What's the best way when there's a lot of buttons(when analysis part of program will be added)?
Best Regards
PS. sorry about my english
Attachments:
pgm.vi ‏33 KB
Enum_Events.ctl ‏5 KB

Dear Finch!
Welcome to NI Forums!
My first advice regarding your code would be to use shift registers instead of Queues as your state storage, since (as you've said) there is no reason to store multiple events that have happened. The state machine design pattern, which I strongly recommend in this scenario is built into LabVIEW, you can use it as a template if you go to the New.. menu.
Please check out these materials for further discussion about state machines.
You are correct in that most of the DAQmx VIs can be placed outside of the loop, only DAQmx Read (the function we actually use more then once) must be placed inside the loop, the rest can stay out. If you want to modify some parameters (like Timing) mid-execution, you only have to stop the task, set them, then start it again.
This can be easily done in a different state, which can execute only when some parameters have changed.
Also, if you want your user to be unable to interact with certain controls while the test is being taken, you can programmatically disable them with a Property Node.
Please get back to me if you have any other questions.
Best regards:
Andrew Valko
NI Hungary
Andrew Valko
National Instruments Hungary

How to avoid multiple DataConnections with LCD ES2

Hi, we are just starting using the data connections to connect via a database with LiveCycle Designer. It seems we are missing something important regarding to manipulation of data from the PDF.
At first we have tried to apply a INSERT command to our first table and be able to browse through the items in the database. We are able to browse through the database only before we have inserted something.
If we insert an item and then try to browse through the database with (Next, Previous, Last or First) it will crash and have an error of the following :
(Next, Previous, Last or First) failed. Multiple-step operation generated errors. check each status value [ID:@11]
So then we have decided to create a second data connection which would have each of the column in the database except for the ID which appears to make everything crash.
E.G.: Table_1
DataConnection1 --> ID, Field1, Field2, Field3, Field4 SELECT Command connection
DataConnection2 --> Field1, Field2, Field3, Field4 INSERT Command connection
Seems like we can't have a SELECT and INSERT in the same DataConnection because with those 2 different connections it works fine....
Then we are trying to show multiple data's in a table which is linked with the ID of the Selected ID in DataConnection1.. To show the data is all fine using a 3rd connection for that Table_2, then we are making sure a blank row is always there at the end of the table to be able to add this new entry to the database with a Add button to INSERT into the Table_2... Unfortunately we do not have a 2nd connection to that table because we cannot link those fields with the database for the purpose of a multiple entry view.
We have tried to make a 2nd connection for the purpose of the INSERT but it doesnt work at all.
We are basing ourselves on the sample provided by Stefan Cameron in his blog http://forms.stefcameron.com/2006/12/18/databases-inserting-updating-and-deleting-records/
I am wondering if we are using the right functionalities and if it is the simplest way to work with databases...
If anyone can help, it would be greatly appreciated!!
Thanks in advance!
Mag

Don't forget to activate the RESOURCE_LIMIT parameter, which default is FALSE :
alter system set RESOURCE_LIMIT = true;
Laurent, I had a similar problem some time ago : I didn't want to avoid multiple access, but only control who was doing what. That's because moving from Client/Server to Web the TERMINAL column in V$SESSION becomes useless.
I tried your solution, but I had to give up with it, because in my Forms9i application some forms call Reports, which generate a new session.
I decided to use DBMS_APPLICATION_INFO, and this is satisfactory for my requirements, but I'm interested to discover other solutions.
P.S. with my solution I'm able to limit accesses, because in the CLIENT_INFO string I put, among other things, the
application user, so I can control if an user is already connected. The problem is that existing applications have to be modified .....:-(

Using multiple refinement web parts on the same page but have them hidden until needed

I have a search results page that has several different Core Results web parts on it (each is connected to a different result source). all hidden by tabs using the HillbillyTabs interface
http://www.sharepointhillbilly.com/Lists/Posts/Post.aspx?ID=42
unfortunately you cant share a refinement web part across multiple results web parts. So I am left trying to figure out how to hide several refinement web parts and only show the active refinement webpart when the result source tab is selected.
The template im using is an OOTB standard search results template with the refinement panel on the left navigation zone and the core results web parts configured in the main content zone.
Scenario:
Search text box passes query to multiple results web parts on a page. Only one results web part is displayed at a time (active tab). The refiner for the active tab shows and displays its refiners in the navigation panel.
There are multiple refinement web parts in the navigation panel associated with each core results web part in the main content zone. These refiner web parts are configured with custom refiners.
the results page displays just one results web part at a time via tabbed interface.
I am trying to figure out how to make the refiner web parts show and hide depending on which tab is selected.
Any help pointing to someone thats already attempted this would be appreciated!
Eric

Hi,
For your issue, you can consider using SharePoint Search Navigation which can achieve a similar feature but not on the same page.
Search Navigation allows users to move quickly between search experiences listed in the Navigation. Navigation is displayed in the Quick Launch control on search pages, and can also be shown as a drop-down menu from the search box.
For more information, you can refer to the blog:
http://blogs.technet.com/b/tothesharepoint/archive/2013/11/13/how-to-add-a-customized-search-vertical-to-your-search-results-page-in-sharepoint-2013.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Photoshop file exports multiple paths to illustrator

I'm brand new to illustrator but have noticed than when i place a Photoshop tiff file, it sometimes imports multiple paths with the image -- some of which
do not show up in photoshop. For instance, I have a file with two objects with paths, I crop to one image in photoshop, then save. When I import that single image cropped file to illustrator, FOUR paths show up instead of one -- i.e. I have the two paths of the original photoshop image plus duplicates of the same, all in the same file. I've noticed this happens on all my files that originally had multiple images even though they had been cropped to just a single image.
Anyone know how to fix this, or better yet, what the heck is going on?

We did not get your screenshot, use the camera icon left of the smiley face.
Did you try Milleniums suggestions, you may have cropped this adn have a clipping path that is off the canvas taht you are not seeing.
To flush this out, I would select the good path you have in photoshop, cut this, delete all paths in your phothsop document, then paste the path in your clipboard, name it, set it to your clipping path.
I personally never use clipping paths for final, as they make my knockouts look unnatural, and too hard edged. I mask my layers(in a grouped set), cause then I am getting my background knockout out at 300 dpi (bitmapped CT resolution), rather than a razor sharp 3386 dpi(LW resolution). You may be working on a web project so this may not affect you as much, but just wanted to note this finer point as many people nowadays never worked on a Scitex/Crossfield/Hell so don't realize this is what is happening.

How to avoide multiple duplicate entries in adress book?

How to avoide multiple duplicate entries in adress book? I can add the same contact name and number more than twice and the phone isn't warning me at all!!! I's quite a heck for me.

not possible from inside AB AFAIK. but you can do the following. in finder open the folder /users/username/library/application support/address book/metdata. switch to the list mode and sort by date modified. quicklook the vcards at the top to see which ones they are.

How to avoid multiple call to function:

In our datawarehouse we have a huge receipt row table where all metrics ar stored in the local currency. On top over that we have views which calculate metrics to the desired currency.
So basically all views looks like this
select geo_region,
product_group,
customer_group,
metric1 * (select get_exchange_rate(currency_id) from dual) metric1,
metric1 * (select get_exchange_rate(currency_id) from dual) metric2,
metric1 * (select get_exchange_rate(currency_id) from dual) metricx,
group by..
As we have about 20 metrics we notices that the function is called 20 times per row.
Is there really anyway to avoid that? Shouldn't it be it's just the exact same call with the same in-parameters over and over again.
We've tried with local sys_context and the performance is better but the call to the context is still performed 20 times. Any Ideas?

Can you avoid multiple function calls? Maybe, if as in your example all the function calls values are computing the same result. If they operate on different columns then you'll have to perform the function call anyway.
Either way you should be able to eliminate the (near as I can tell) pointless subquery from dual
You might be able to avoid the repeated function calls if the values are always the same. If every computation you could save the function call (and subquery!) by doing it once and then using assignments after the initial query using variables after the initial query, perhaps using NULL in the query as placeholders to select into a record - something like
select inital_region,
         product_group,
         customer_group,
         metric1 * exchange_rate(currency_id) metric1,
         null metric2,
v_metric2 := metric1;
...Message was edited by (fixed typo):
riedelme

Export multiple paths to illustrator

Photoshop CS5
Is there really no way to export multiple paths, on multiple vector layers, to Illustrator in one go?

What did you do to get that option to be available? I don't see it. All I see, in the "Export paths to file" dialogue is the path I currently have selected. But I have many vector layers I want in Illustrator (which I've already one by one copy/pasted into Illustrator, but I still want to know).

Servlet classpath: multiple path

Is it possible to have multiple path in a servlet classpath (not in the java
          class path) ?
          How do you do it. ?
          Jean.


Yes, it is possible.
          1) on NT, use ";" as classpath seperator.
          2) on UNIX, use ":" as classpath seperator.
          Cheers - Wei
          Jean Kunz <[email protected]> wrote in message
          news:8b531n$q4m$[email protected]..
          > Is it possible to have multiple path in a servlet classpath (not in the
          java
          > class path) ?
          >
          >
          > How do you do it. ?
          >
          > Jean.
          >
          >

Service Contract Determination - Multiple sold-to-parties

Hello Gurus,
Can anyone help me on understanding this:
We know that in standard configuration, the sold-to party in the service contract and in the business transaction must be identical.
But It is possible to change someting so that we can assign a service contract to multiple sold-to-parties?
There must be a workaround to do this. Does anyone tried it?
Thanks and regards,
Bruno Garcia

Hello Ashwin,
We're using IC Webclient at our customer Call center. We register all contacts made in Interaction Record document, and all service requests in Service Ticket Document.
What we're trying is to define the same SLA agreement for all sold-to-parties partners. We did all configurations relationated with service profile, response profile, product and service contract.
However, SLA calculation only works if the sold-to-party partner of service ticket is the same that in the service contract. So that's why we put this question here.
We already tried to use CRM_SERVICE_CONTRACT and CRM_SRV_SLA_CALCTIME BAdI's, but no luck: they also seem to depend on this verification.
What we're trying to do is to skip this verification. We need to calculate the SLA for all service ticket, no matter what sold-to-party partner is.
Do you think this is achievable?
Thanks in advance,
Best regards

Multiple Sold-to-Parties in Organizational Model

Dear All,
I've made an Organizational Model with multiple Sold-to-Parties. With that the same amount of Distribution Channels and Divisions have to be maintained, which i have done.
The problem now is that i can't seem to maintain the relation of those Distribution Channels and Divisions with the Business Partner in the Sales area Data of the Sold-to-Party in transaction BP. I can only choose between the original Sales Organization, Distribution Channel, and Division.
The only thing that has changed is that it isn't called Distribution Channel 01 / Division 01 anymore, but the name i gave it. That is the strange part too, since that's done in the same transaction where i've added the other Distribution Channels and Divisions too.
Hopefully anyone can tell me how the Distribution Channels and Divisions i've added will show up in the Sales Area Data in order to link them to the Sold-to-Party.
Thanks in advance,
R.Kunst

Hi Gun. and Jay.
Thanks for both of your reactions, you're both thinking in the same direction as I am, and where I think we should look for the solution to this problem...
Gun: You've understood me right and yes, I've already tried exactly what you've told me, but that doesn't work somehow.
What I mean by the line you didn't understand is this:,I've made changes to the Distribution Channel and Division that were already provided by SAP, and those changes show up in the Sales Area Data. The Divisions and Distribution Channel I've added don't show up though. So i know I've changed the settings in the correct Transaction, but they still don't show up.
Jay: I've also tried what you're telling me, because I think that should be the right way too, but that didn't work and I don't know why...
Hopefully we can find an answer to this together since I've already heard from more people who have encountered the same problem.
Best Regards,
Reinier Kunst
NewColutions B.V.

Avoid multiple paths rpd part II

Similar Messages

Maybe you are looking for