Avoid multisession for one client for security reasons

Is there a way to prevent multiesion on a weblogic server (cluster)
Regards

What do you by preventing multisession? Do you mean session replication in
cluster?
please clarify.
-utpal
"avargas" <[email protected]> wrote in message
news:[email protected]..
>
Is there a way to prevent multiesion on a weblogic server (cluster)
Regards

Similar Messages

WRT110: I want to create an access rule for one client for one application during one time period

I have a problem with one of the clients on my LAN which is running uTorrent to detriment of everyone else. It saturates the pipe. I have been unable to prod this user into bothering to tweak their settings to throttle bandwidth back and so have resorted to an access rule on the router which kicks that MAC address off during a particular time period during the day. But as irritated as I am about this slacker sense of outrageous entitlement, kicking them off entirely seems a tad heavy handed even for me.
So, In the router I can create a rule per MAC address and specify time. But is it possible to limit this to denying uTorrent ONLY? And if so what port or port ranges would I use.
Alternatively I already use a QoS setting for one of my VoIP TA's. Would I gain anything by degrading the application indirectly by creating a QoS = LOW for that port range? Again, I don't really care about any other application, just uTorrent and just that client. How much degradation is there really in setting QoS to LOW?

Well it wont make much difference, when you enable QOS service on your router. Yes it is possible to Deny uTorrent application from your Router. When you are Under "Application and Gaming" Tab, Under "Blocked Application" you will find "Application Name" , "Port Range" and "Protocol" so you need to input under Application Name "uTorrent" and under port range you need to input the port number which uTorrent application use and then under protocol select "Both" and click on ADD. Then again in Application you will find uTorrent , select and click on (>>) right arrow so it will block that application on your Router. By doing this it will block uTorrent from your Router.

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

Good evening would it be possible to get back a free license for one month for adobe photoshop cc because I went on vacation and I have not had the opportunity to test it?

Good evening would it be possible to get back a free license for one month for adobe photoshop cc because I went on vacation and I have not had the opportunity to test it?

Hi tay-fun@livefr,
We apologize however it's not possible to reset the trial however you can try and use it on a different machine with a different Adobe ID (if possible).
-Ankit

I bought Photoshop CC for one year for 599 rub/month and today bought CC and Ligtroom for 299 rub/month. How I can stop agreement for 599 rub/month?

I bought Photoshop CC for one year for 599 rub/month and today bought CC and Ligtroom for 299 rub/month. How I can stop agreement for 599 rub/month?

Please see Return, cancel, or exchange an Adobe order -
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

Looking for NNTP client for iPhone

looking for NNTP client for iPhone!!!
thanks and please help. when I use Windows Mobile I can use NNTP client.

Hey all.
I'm actually the developer of that app--and as Irish John points out it was originally an app for the jailbroken devices.
However, I'm currently in the process of writing it for 2.*, and hope to have it out in the coming weeks. It will be free, or very close to it.
If you're interested in being informed of when this happens, feel free to star this issue: http://code.google.com/p/inewsgroup/issues/detail?id=56 .
If you have any questions/comments/thoughts/feature requests, feel free to email me at [email protected] .
Take care .

Hello CS Community: I am about to renew my cloud subscription for one year. My current subscription is for one user for both Mac (and) PC. When I pay for this, how do I know I'm getting a subscription for both my MAC and PC? It's not clear what is being p

Hello CS Community: I am about to renew my CS cloud subscription for one year. My current subscription is for one user for both Mac (and) PC. When I renew, how do I know I'm getting a subscription for both my MAC and my PC? It's not clear what is included in the purchase. I'm choosing the 49.00 a month package. Any insight would be much appreciated.

Hi ShearLine,
The Creative Cloud subscription is not OS specific as it's licensed via your Adobe ID.
You can purchase a single subscription and use it on 2 machines irrespective of it being Windows or Mac.
Regards,
Rave

Hi, my free trial license has expired, and I am wondering if it's possible to only pay for one month for after effects without locking for a year with monthly fee. I only need this for a project that is ending next week.

Hi, my free trial license has expired, and I am wondering if it's possible to only pay for one month for after effects without locking for a year with monthly fee. I only need this for a project that is ending next week.

Creative Cloud Plans
https://creative.adobe.com/#plans

Audible Alert for one IMAP Email (security alert)?

i tried a search for this and i assume i know the answer but i am hoping perhaps someone has a workaround.
i have set up vitamin D (so far it is pretty fantastic on the demo) which allows me to get an email alert when there is activity/motion in front of my integrated iSight. i am about to set up something more sophisticate which I assume also allows for an alert via email (not sure if it allows for a text message alert or not).
is there some way to get an AUDIBLE alert for one email account? i would really like to be able to be alerted in some way that there way activity for security reasons but i really don't want to be a slave to checking my email every time something comes in.
any ideas?
THANKS

You can't set a different notification sound for each family member but If you designate the people that you want notifications from as VIP, I think it might be possible to get notifications from family members only.
Launch mail and tap the blue "I" in the VIP section. Tap "Add VIP" in order to add the family members to the VIP list that you want to include. Then tap "VIP Alert" to automatically go to the notifications area of the settings app. Set you preferences in there for the family members. Then go to Settings>Notitication Center and turn off the audible notifications for all other mail.
The setting states that whatever you set for VIP alerts will override the other mail alerts, so I am taking that to mean that what I am suggesting is possible to do.

One client for ABAP+Java

Hi,
In my PRD system (ERP 6.0 ABAP+Java), users may run via SAPGUI & access cProjects via web. Now I'm wondering that I should whether use 2 clients or just one. If using one client only, should I use client 001 or I can use another I like?
Btw, what are advantages & disadvantages of having 2 clients and the same for using 1 client only?
Thanks,
Toan Do

You can get more details about SAP Standard clients here:
http://help.sap.com/saphelp_nw70/helpdata/en/7e/c8189452c511d182c50000e829fbfe/frameset.htm
and client copy procedure over here:
http://help.sap.com/saphelp_nw70/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
Regards,
Siddhesh

Rfc for one client

hai all, iam using adaptive rfc model.I need to know if the rfc created in one clients be accessible from another client.
Thanks N Regards
Sharanya.R

Sharanya,
As far as I know RFCs are client independent but the the data is not. So lets say if you have RFC called ZRFC_GET_USERDETAILS available in client 100 of your backend the same will be available for client 200 as well.
Also if you created your model by connecting to client 100 and would want now to get data from client 200 you don't need to change anything in frontend. All you need to do change the JCo Settings in Web Dynpro Content Administrator.
I hope i got your point.
Chintan

Web Page Tree View Not Working for One Client

Hello all,
I have one client who is suddenly having problems with the "Tree View" in Web Pages. He clicks it and nothing happens, so he can only view pages by List View. Also, when he clicks the pagination at the bottom of List View, nothing happens. However, he can still use the Next/Previous and First Page/Last Page arrows - they work, but it takes forever to find a page since it's a very large site.
He logged in on a co-worker's computer, and did not have the problem. He's running Windows XP, and it happens in both FF & Chrome. He updated flash and java, and disabled all his extensions and it still caused the problem.
Has anyone else seen this? I'm at a loss as to what to do. He's the only one within the organization that is having this problem, and of course, he's the one who uses ABC the most. He's super frustrated.
Thanks!

Okay, it turns out the problem is when the client is logged in in French. When he switches his account to English, the problem goes away. When he logs in on his computer with a co-workers username, it works in English, but not in French. When he logs in at the co-worker's computer with either his or her username, same thing - it works in English, but not in French.
So, there is something wrong with French UI.

Group policy template for Novell Client for Windows 7

Does anyone know if there is a group policy template for the Novell Client for Windows 7? I find it really hard to believe that Novell has not yet released one, but I cannot find one anywhere. We use ZCM 11.2, and I really need to be able to send out settings for the client via a group policy.
By the way, I am also posting this on the Novell Client forum, but since this is also a ZCM thing, I am hoping I might get some feedback here.
Rick P

Two recent/new resources are available for the Novell Client 2 SP3 for Windows:
Cool Solutions AppNote: Novell Client 2 SP3 for Windows: Registry Settings
Novell Client 2 SP3 for Windows: Registry Settings | Novell User Communities
Cool Solutions Tool: Group Policy Administrative Template for Novell Client 2 SP3 for Windows
Group Policy Administrative Template for Novell Client 2 SP3 for Windows | Novell User Communities

How to approve the request only for one time for human task in BPM Worklist

Hi All,
I'm having a requirement where i have made the hierarchy in the .task file where in created two users for which i need an approval in a hierarchical manner. But when i'm approving the request from worklist app for one user and the request is going sucessfully to the second user and if i approve it over there it once again coming to first user where i have approve it once again to get the request processed. how to get request processed only for one time when it is approved. Do we need to customize anything
If you did it can anybody can share thoughts on this please. Your help is highly appreciated.
I am not able to see the rejected request at all. where to see the rejected request.
Regards,
CH

Hi,
Following are the some important points you should understand about ESS Leave Request Workflow
1. The Visualization ( how should it appear in UWL and what should happen when you click on a particular workitem) is defined in SWFVISU. Check for TS12300097. Generally, it invokes com.sap.xss.hr.lea.appl/LeaveRequestApprover Java WebDynpro application. Just check whether you are able to get the correct Leave Processing application called when you execute your workitem from UWL?
2. In general it should have option to process the leave request either approve/reject. When the leave request gets approved/rejected the status of the Leave Request document gets changed ( in workflow it is &REQ.STATUS&
3. There is a need to schedule a background job for program RPTARQPOST which will pick up all the documents in APPROVED status and creates an absence record for the same.
4. Apart from schedule job as mentioned above, you also have to schedule a background job for program RPTARQEMAIL, which is basically used to send e-mails for all the documents which are yet to be approved to correct manager.
as you say , you can not see Approve/Reject options from UWL, it looks to me that correct javawebdynpro application is not being called for this task. Just check this !!
Good Luck !!
Regards
Krishna Mohan

Avoid multisession for one client for security reasons

Similar Messages

Maybe you are looking for