Avoid Patch 27 for 2005A SP1 - upgrade immediately to Patch 29

The server threw an exception.
The server threw an exception.
The server threw an exception.
You will see this for every synch module, and it could possibly lock up B1 database, causing UI to freeze when doing an update or add.
The fix is to move to Patch 29 immediately, that is if you are on Patch 27.
If you aren't on 27, then stay right were you are, if it's not broke don't fix it.

You may check this thread to get more info regarding the upgrade:
Upgrade to 2007A SP01 PL05 HF2
Actually this question belongs to System Administration forum.  Please post the similar question there and close this one.
Thanks,
Gordon

Similar Messages

  • Installed the Java patch for MAC yesterday and immediately could not get adobe reader to show pdf files...have troubleshot and can't seem to remedy ...ideas?

    I have used the Firefox troubleshooting guides, no good. The Java patch is enabled and shows when I check applications. However when I run Firefox plugins it still shows the java plug in is outdated and need to be updated immediately.

    OK, I went to the Firefox knowledge base article you cited and followed the directions with the exception that in the drop down menu I choose Adobe Reader for PDF files rather than the plug in default that apparently was set by the Java patch. Problem solved !!!!!!! Thank you so much for taking the time to get me back to the basic place I needed to be to correct this issue. YOU ROCK!!!!

  • Can not find solaris 64 9.0.1.5 patch for repository installation

    Hi,
    I found in oracle10gAS installation guide that I need to apply patch 9.0.1.5 or later in order to use an existing oracle 9 database for my repository. The problem is that I can not find oracle db 9.0.1.5 patch for solaris 64bit. The latest patch for solaris 64 is 9.0.1.4. Does anyone know if I can use the 9.0.1.4 patch or where I can find 9.0.1.5?
    9.0.1.5 only exists for solaris 32 versions.
    Thanks

    Hi giorgio santandrea,
    I am also facing the same error, could please tell me how you resolved that error?
    Thanks & regards,
    Manpreet Johal

  • Patch for HTMLB Handling of Internet Explorer 7

    Hi,
    My project is using <b>Portal NW04s SP9</b>. When I logon to Portal using Internet Explorer (IE 7), javascript error "_htmlMessageBar is undefined" came out and all the function links such as Help, Personalize, Logout are not function at all.
    I read the <b>SAP Note 990763 - HTMLB Handling of Internet Explorer 7</b>, and glad to see that, this issue can be fixed by applying <b>Patch 4 for NW04s SP9</b>.
    However, I am not able to get Patch 4 for NW04s SP9 in SAP Service Marketplace! I downloaded and deployed the <b>Patch for PORTAL 7.00 SP09</b> (Patch Level 10 - which I think is the most relevent patch) to my Portal Server. Bad luck, same problem still exists.
    Is there anyone has downloaded and applied the Patch 4 for NW04s SP9 before?  Can you please tell me where can i get this patch?
    Thanks a lot,
    HauChee

    Hi Nitin,
    Thanks for your reply.
    Finally, I found the correct patch file under <b>SAP Support Portal -> Download -> SAP Support Packages -> Entry by Application Group -> Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 2004S -> Entry by Component -> Enterprise Portal -> PORTAL FRAMEWORK 7.00 -> #OS independent -> Patch for PORTAL FRAMEWORK 7.00 SP09</b>. Click on the <i>info</i> link, you can check out the patch info, and you will find out that, it included the <b>HTMLB Supports IE7</b> in patch level 4.
    Anyway, thank for your suggestion and I appreciate that.
    Thanks,
    HauChee

  • Upgrade for SBO 2005A SP1 PL 43 to SBO 2007A.

    Hi All
    I would like some assistance with the procedure to upgrade from SBO 2005A SP1 to SBO 2007A.
    Which patch level must I use or I can just go straight to 2007A SP1 patch level 5 from SBO 2005 SP1 PL43?
    Thanks
    Bongani Dlamini

    You may check this thread to get more info regarding the upgrade:
    Upgrade to 2007A SP01 PL05 HF2
    Actually this question belongs to System Administration forum.  Please post the similar question there and close this one.
    Thanks,
    Gordon

  • ABAP and Kernel Patches for Upgrade and Conversion in 4.6C

    Hi,
    We are in a process of upgrade and unicode conversion for the source release 4.6C (Kernel  46D_EXT Patch 2225).
    "Combined Upgrade&Unicode Conversion Guide"  for "SAP Basis 4.6C u2192 SAP NetWeaver 7.0 application Server ABAP Unicode Including Enhancement Package 1 Support Package 01 - 06" , In Software Requirements step,  it says
    "3. Import 4.6D Kernel patch 2326 from SAP Service Marketplace according to SAP Note 19466"
    We wanted to know whether "IT IS ABSOLUTELY NECCESSARY TO GO FOR THE KERNEL PATCH 2326".  We dont have "EBCIDIC code pages" in our MDMP system.
    We need to know  becauase we are also doing OS migration from AIX to Sun and this step will add to our production downtime.
    Please advice what are the other causes we should go for the kernel 2326.
    Regards

    Hello Mr. Nils Buerckel,
    Thanks for the reply.
    We wanted to be very sure whether we should used Kernel 46D Kernel patch 2326 (As it is specifically mentioned in the SAP CU&UC guide and in SAP Note 867193, It is mentioned that  "This patch contains enhancements that are required to execute the "INDX Analysis" scan)
    OR
    Can we go for the latest kernel patch avaialable at market place? And Will the latest kernel patch also contains the "enhancements that are required to execute the "INDX Analysis" ?
    Please reply
    Thanks

  • I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have be

    I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have been forced to go to IE or Crome in order to accomplish what I need to do. Very frustrating. Also clicking in the slider area has no effect. "Page Up" and "Page Down" keys work. Holding down left mouse button on slider works. Also very frustrating. Can someone help
    == This happened ==
    A few times a week
    == Upgraded to 3.6.3.

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Not Getting SAPKINBC9A upgrade patch for PI_BASIS

    Hi All,
    I am implementing SPS 12 in my ECC 6.0 System. System is on oracle and linux. My PI_BASIS patch is on 2005_1_700 level and i need to upgrade the same on 2006-1_700. So i cannnot import any of 2006 patch before this component
    I am not getting the support pack SAPKINBC9A on OSS. Am i searching right patch or do i need to implement some other patch for this.
    Thanks in Advance
    Thanks,
    Bhanu Pratap Singh

    I got the patch. And i have implemented the same with SAINT.

  • Patch for upgrading 10g AS from 10.1.2.0.2 to 10.1.2.1

    Hi All,
    I am in process of doing 10g AS integration with 11.5.10.2.
    here as per documentation i have seen that this 10g AS has to upgrade
    My 10g AS version is 10.1.2.0.2
    The below msg is as per Oracle Documentation
    If you are running Oracle Application Server 10g Release 2 (10.1.2.0.0) or Oracle Application Server 10g Release 2 (10.1.2.0.1) Standard Edition One, then apply the Oracle Application Server 10.1.2.1 patch before applying Oracle Application Server Portal Upgrade.
    I have searched a lot in metalink for patch but no luck
    So please let me know the right patch to upgrade my 10g AS from 10.1.2.0.2 to 10.1.2.1
    Also any supporting document for this upgrade
    Thanks in advance
    Regards,
    Bhanu Chander.

    I have downloaded patch p5983622_10123_LINUX.zip
    and first tried to upgrade infrastructure home
    but while upgrading it says
    oracle universal installer has detected that your database is version 10.1.0.4.2 before you can continue you must apply a required database patch set.
    But in documentation i have seen
    Supported Database Releases
    The portal schema may be residing in an OracleAS Metadata Repository, or in a customer database. The database in which the portal schema resides must be one of the following supported releases:
    Oracle Database 10g (10.1.0.4.2) or later
    Please let me know what should i do now
    Thanks in advance
    Regards,
    Bhanu Chander.yes, because the Infrastructure Database needs to be upgraded. And it is listed in the documentation of the same patch set.
    In the Readme file for the patch set 3 (5983622 or p5983622_10123_LINUX) as you mentioned, please see Section 5. Before you begin applying this patch set
    It reads the following:
    "5.6 Applying the Oracle Database 10g Release 1 (10.1.0.5) Patch Set
    The Oracle Database 10g Release 1 (10.1.0.5) patch set must be applied to all database instances (for both the Identity Management and Metadata Repository installation type and Metadata Repository only installation type) before applying OracleAS 10g Release 2 Patch Set 3. If OracleAS 10g Patch Set 2 (10.1.2.2.0) has been applied previously, then you do not have to apply the database patch."
    hope that explains what you need to do. i.e, your infra DB version is 10.1.0.4.2 and needs to be upgraded to 10.1.0.5.
    AMN

  • Upgrade patches for 10.1.2.3 during R12.1.3 Upgrade

    Hi,
    Need clarification about 10.1.2.3 patches during R12.1.1 to R12.1.3 upgrade
    I am following the note Oracle E-Business Suite Release 12.1.3 Readme 1080973.1 and applying the patches "Forms and Reports for Oracle E-Business Suite Release 12 Document 437878.1"
    I am not clear whether I need to apply the Patch 8919489 - R12.TXK.B.Delta.3 before applying any other oneoff patches, this patch seems to be included in R12.1.3 and I am applying these patches of R12.1.13 upgrade
    Thanks

    965417 wrote:
    Thanks Hussein for the confirmation, I have another question regarding the CPU Oct 2012 patch for 10.1.2.3 Oracle Home
    I am following the CPU patch note 1486535.1 and as per this note, we have to follow another note Document 1354842.1 for 10.1.2.3 patches
    Patch Availability for Oracle Fusion Middleware 10.1.2.3
    Is Patch 9593176 only relevant for 10.1.2.3 OH with R12.1.3? Could you pls confirm?
    It is applicable to 10.1.2.3 ORACLE_HOME.
    Thanks,
    Hussein

  • Patch for upgrading OBIEE 11.1.1.5.0 to 11.1.1.6 for OBIA 7.6.9.4

    Hi,
    We have installed OBIEE 11.1.1.5 and installed OBIA 7.6.9.4.
    But when we try to open RPD file it gives error of compatibility.
    Can anyone tell me what is the Patch number which can upgrade OBIEE to 11.1.1.6
    Thanks In Advacne,
    Ankit

    It has to be more than 11.1.1.6.4+ for BI apps 7.9.6.4
    Check this certification matrix from Oracle.
    http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fmiddleware%2Fbi-applications%2Fbiapps7964cert-matrix-1891451.xls&ei=OVucUf7nI9HjrAeAkoGgDQ&usg=AFQjCNFpBX79KDDbfKsXqW3pL5RQgknnfQ&sig2=A7rBJwbMXKXdkJHP7NfFBw&bvm=bv.46751780,d.bmk
    Also
    Check this note ID from oracle support you will have your answer.
    OBIEE 11g: Required and Recommended Patches and Patch Sets [ID 1488475.1]
    Mark as correct,
    Regards,
    Veeresh Rayan

  • Mandatory Patches for upgrade

    We are in process for upgrading 8.1.7.4 (32 bit) to 10.2.0.4 (64 bit) on AIX . We downloaded so far Base 10.2.0.1 and patchset 10.2.0.4 plus latest CPU patch. Does anybody knows if any Oracle recommended Mandatory Patches out there so we could apply before database upgrade.
    Thanks.

    I end up opening TAR with Oracle and they send me steps on how to find list of Recommended Patches.
    Now to find the recommended patches on 10.2.0.4.0 do the following
    1. Log into metalink.
    2. Click on the tab patches and updates
    3. Click on the link "Oracle Database" under "Recommended Patches"
    4. Select the release as "10.2.0.4.0" and platform as "IBM AIX Based Systems (64-bit)"
    5. Click on GO. This will list you the recommended patches.

  • Is Intraoperative patch need for DB version Upgrade in 11i ?

    Dear All,
    I need to apply ATG RUP7 in 11i instance, but the database should be greater than 9.2.0.8 version otherwise it is not possible,, Am i correct .
    Ok now am Upgrading the DB version to 9.2.0.8 then planning to apply ATG RUP7 , then how the Application will work because the application was running in ebiz release version now upgraded 9.2.0.8. Is there any Intero Patch for application.
    Regards
    HAMEED

    Dear hussien,
    Thank u very much,, i have restarted the installation but again failed with some other reason,, now i am not in hurry,, i restored the old backup and released the instance.
    Can u explain me,, i failed in the last part of this version upgrade. that is while running "catpatch.sql", yes its known issue but still i failed several times to run successfully.
    i am getting error like this below:
    The following statement may cause an
    ORA - 29554: unhanded Java out of memory condition error
    If so, this is because there is insufficient system tablespace,
    shared or java pool size, or some other resource value is too small.
    An additional message describing the problem will be output of the statement.
    PL /SQL procedure successfully completed.first of all i have resized the system tablespace, then i changed the shared_pool_size 150m, previously it was 260M by default, and changed java_pool_size 150M previously it was 64M. then started the database with migrate option and i ran the catpatch.sql.
    Obviously it must complete successfully,, but it failed,
    note: its EBS database
    Regards
    HAMEED

  • Special Patch for 10.2 in order to do an rman restore upgrade to 11gR2

    Am about to start on the 11gR2 upgrade process and was talking with some dba-friends in other companies to learn what not to do , etc. I had mentioned that I wanted to do an RMAN restore then alter resetlogs upgrade and let the upgrade process automatically take me to 11gR2. He mentioned that he had tried that but had run into an rman error when 10g did not have some table in the data dictionary, but there should be a patch for that. Essentially he said the patch would put the pre-11g table needed for an rman restore upgrade. He didnt have the information available and has yet to get back to me, and I have searched metalink looking for it with no luck.
    Has anyone else hit this error and could provide either the metalink article, however , better the patch number i need. I will be going from 10.2.0.3 to 11gR2 via an rman restore to a remote system and then issuing an alter ....resetlogs upgrade command.
    Thanks in advance
    Ed Grimm

    I am not an RMAN expert, but pl see if MOS Doc 790559.1 (RMAN Restore of Backups as Part of a Database Upgrade) can help
    HTH
    Srini

  • Urgent help needed while applying patch for upgrade with conflicts

    I try to upgrade 11.2.0.2 to 11.2.0.3 on LInux environment.
    I have to apply patch P1253900 before the upgrade per oracle doc.
    however I got following conflict:
    Verifying environment and performing prerequisite checks...
    Checking skip_duplicate
    Checking skip_subset
    Conflicts/Supersets for each patch are:
    Patch : 12539000
    Conflict with 12827726
    Conflict details:
    /u01/app/grid/product/11.2.0/grid/lib/libserver11.a:/ksxp.o
    Following patches have conflicts: [   12827726   12539000 ]
    Refer to My Oracle Support Note 1299688.1 for instructions on resolving patch conflicts.
    I checked above oracle note, and did not say any resolution.
    If anybody had the same issue before, please help me with the resolution.
    Thanks in advance.

    Follow the steps in this MOS Doc
    Database Patch conflict resolution [ID 1321267.1]
    This MOS Doc is referenced in 1299688.1
    HTH
    Srini

Maybe you are looking for

  • Error while creating a system object for R3 in portal

    Hi, I am getting error while trying to create a system object in portal. Following are the details I used : Under WAS... Web AS Host Name :<XXXX>:8001 Web AS path: /sap/bc/bsp/sap/ Web AS protocol : http Under User management: Authentication Ticket T

  • Looking for a better graphic card. Need feedback and suggestion

    I'm looking to get a different graphic card but I'm not sure really what to buy, These are my computer specs  Computer: Gateway Gt5228 Media center edition OS: Windows Xp  Current graphic card: NVIDIA GeForce 6100 PCI Express Slot avaliable I was won

  • Not able to save pricing condition type in Sales order

    Hi I have created a SO and there is a condition type pb00 that I have to enter manually. when I save it and come back and reopen the SO, the condition type vanishes. It does not give out any error and i tried different ways of updating like 'carry ou

  • All apps gone after forced restart of iPad

    Hello, I was just developing a bit with my iPad and after the debugger got hang I had to restart my iPad by holding down the home button and the lock button for some seconds. After the iPad was booted up again, i noticed that all apps (expect the bui

  • Matchcode Object for fiels STRAS in SANS1

    Hello All, The table SANS1 conatims the field STRAS for street for 35 charcaters and STRAS_MC as the matchcode object for this field which is of 16 characters in upper case. I want to create a search help. Its working fine with STRAS_MC but with only