Avoid quality inspection

Dears
While making a PO my material was flaged for Quality inspection for 01 type
Later i decided that no need of any inspection for that particular PO,so i change po under the delivery tab quality inspection to unrestricted use,But still when i made GR system post material in quality inspection
there is any other methode is ther to avoid inspection for already creted po
Pls give any idia
AF

Hi,
If the material is activated with inspection type you cannot avoid generation of inspection lot.
If you dont want to have inspection lot for this time means, reverse the GRN and de-activate the inspection type in material master.(Ensure that there is no stock in quality inspection)
Now do the GR again, the material will not go to quality inspection. It will go to un-restricted use directly
Regards
Hari

Similar Messages

  • How to move the stock after quality inspection in wm

    hi ,
       if i am posting GR with PO  for the material XXXX quantity of 10  it should not be posted in Warehouse. after completion of stock inspection in QM then only it moved to warehouse . But the problem is when i post gr in migo the transfer requirement created automatically...if i make this  TR manual, two posting occurs one for gr posting  and another one for manual tr...how to control this....
    ex: matxxx-10 quantity
    migo posted(no stock should be posted in wm)
    after qc--8 quantity o.k
    then we need to move this 8 quantity to storage bin.
    how to achive this process in WM. (i already working manual TR it will create two posting)
    Thanks
    Muthuraman.D

    Hi,
    Use movement type 103 for GR. so, the goods will posted in to blocked stock.  you deselect the auto TR creation for 103 movement type.
    once the Quality inspection over the do the 105 to release blocked stock to unresticted stock. in 105 you activate the auto TR creation.
    Now you may avoid double tr creation.
    this you have to discuss MM consultant also. because of 103 & 105 movement type using.
    SAM

  • Automatic Quality Inspection in Purchase Order

    Hi all,
    If i create a purchase order for a material with QM avtive, automatically the system put the value of Quality Inspection into field INSMK. Is it possible to avoid this, even if the material is managed by QM?
    Can you help me, please?
    Thanks and regards
    Luca

    Hi,
    Check on it.
    Re: how we may by pass quality inspection during PO creation
    pherasath

  • Quality inspection lot creation during GR for STO

    Dear Friends,
    I have a Scenario for Quality inspection lot creation during GR with respect to STO
    can use inspection type 01
    or is there any other inspection type to create inspection lot during GR for STO
    Thanks & Regards
    Raj

    Dear Friends,
    when i maintain inspection type 08
    Inspection lot is created in GR  Plant
    Thanks for that
    but when i am moving the stock from  Plant  Sloc A to same plant Sloc B one more inspection lot is cretaed (movment type 311)
    if i go to SPRO i can deactivate 311 movement type to avoid creating inspection lot
    but it is client level , i need to restrict only for one plant
    is there any other way to control  just one inspection lot for one GR
    if you are not clear with my writing pls do not hesitate to ask for more information
    Thanks & Regards
    Raj

  • Invoice payment blocked for material is under quality inspection

    hi,
    how to prevent invoice being processed (MIRO)  when the materials are booked in quality inspection stock, Is this possible without the help of QM. 
    thanks

    Hi,
    Go to material master , check the QM View active.
    If QM View is active , go to this view and change the QM control Key as 000 and remove the tick mark for QM Proc active Field.
    Regards,
    Andra

  • Rejected material in quality inspection

    Dear Guru's,
      Is there any report to find out the rejected quantity in quality inspection with reference to the GR and PO.
    Rgds,
    cherukuri

    Dear Guru,
    we can generate or standard reports are available.
    If u tell me the processes how u feed the data for rejections , i can give a better solution.
    two methods are there
    1) Notifications
    2) GR Processes
    more clarity is required.
    shridhar
    9880644496

  • Reg., Quality Inspection at the time of Goods Receipt against the P.O.

    Hi
    Pls provide the procedure for the "Quality Inspection at the time of Goods Receipt against the P.O."
    Thanks in advance.
    Regards
    Ravi

    Answers:
    1.Our client wants that he want to send back to Vendor, In which way we have to do in SAP?
    In QM,Raise notification for rejected qty in special stock, this will carry task of return delivery.
    2. Without Quality inspection User shouldn't do the MIRO?
    User discipline only it will be solved or
    Prepare user exit with help of ABAP'r
    while goods receipt(MIGO) for all scenarios(under delivery/over delivery/rejected) in development,
    Check MIRO for QC passed qty is allowed for bill booking, give meaningful messages for all scenarios.
    3. Quantity was certified by 13 only, so the user should do the MIRO for 13 only, Kindly suggest iIn which way we have to configure in SAP?
    Do return delivery for rejected quantity(2),if there excise,reverse it thru J1IS.
    After finishing above steps,Wheu u do IV only Quantity 13 will flow.
    Invoice verification will be done only for the accepted quantity.
    Above solution will solve problem.
    Edited by: Jeyakanthan A on Jan 11, 2010 12:01 PM
    Edited by: Jeyakanthan A on Jan 11, 2010 12:02 PM

  • What are the settings for  rework order  quality inspection

    HI,
    Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
    What are the settings for rework order Quality inspection?

    Refer beautiful document
    http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction

  • Problem in BAPI for stock posting from quality inspection  to unrestricted usage

    Hi all,
    I am using BAPI_GOODSMVT_CREATE for  stock posting from quality inspection  to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
    GOODSMVT_HEADER:
    PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
    GOODSMVT_CODE:
    GM_CODE:  ‘04’ .
    GOODSMVT_ITEM:
    MATERIAL = MATERIAL NO
    PLANT = PLANTCODE
    STGE_LOC = ‘WIP’
    BATCH = BATCHNO
    MOVE_TYPE   = ‘321’
    ENTRY_QNT = 100
    ENTRY_UOM =  ‘EA’
    ORDERID =  Prd ord no.
    After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
    Kindly help me.

    Hi Naveen,
    Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
    BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
    Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

  • Goods return without quality inspection

    Dear Friends ,
    I wants to do material return without quality inspection , is it possible , how can we do this.
    Regards,
    Mahesh.

    Hi Mahesh,
    In SAP Business One, there is no quality inspection for goods return. You need to post on a proper forum to get the answer.
    Thanks,
    Gordon

  • Block for payment in MIRO if there is blocked stock in quality inspection

    Hi all,
    In quality inspection, if they put some quantity into blocked stock, then i should go for payment block in MIRO . Here
    the QA status may be Pass or Fail.
    my payment block will depend upon blocked stock in quality inspection but not on QA status.
    Thanks
    babu

    Hi Pabitra
    If the material is taken to QI, then no liability is created for the vendor during GR. Now if you pass it in QA, then the stock moves to Unrestricted stock. Now if you transfer from Unrestricted stock to blocked stock, this will not block MIRO, as the GR/IR has already been hit.
    if you bolck payment for these type stock, then you can take help of User Exit, in MIRO
    Regards

  • Plant to Plant trasfer in Quality inspection Status

    Hi All,
    I would like know how can I transfer quality inspection (Q) stock from plant 1 to plant 2 and receive in quality inspection (Q) status as well.  Movement type 301 is only helpful for unrestricted stock.  Is there any way this can be possible? If you can help me with the steps or any documentation will be very much appreciated.
    Thank you for your help!

    Hi,
    You can only transfer the material  from unrestricted stock  to unrestricted stock. If you need to transfer the stock from QI to Qi inspection you can follow this process.
    you can use mvt type 321 to transfer the material from quality inspection to unrestricted within plant.
    After this is done you can use mvt type 301 to transfer the material from unrestricted stock of plant 1 to unrestricted stock of plant-2.
    Now use mvt type 322 to transfer the material from unrestricted to quality inspection stock
    Br,
    Tushar Patankar

  • Allow Negative Stock in Quality Inspection

    Hi All,
    I have a general question regarding Negative Stock.
    Is it possible by any means to allow -ve stock in Quality Inspection. If yes then what are the customizing settings that are needed.
    Any valuable inputs will be really appreciated!!
    Thanks In Advance!!
    S

    hi
    firstly how can we have negative stock in Quallity
    stock updates in quality from PURCHASE or PROduction so we cant have -ve stock in quality
    negative stock will be there only up on consumtion
    now u can have negative stock in GOODS ISSUE ,as on emergency if u dont have mateial and u have to issue some material to production then u have to have -stock open
    now for this go to material master plant data 2 view and here u can ticl for allow negative stock
    regards
    kunal

  • How to scrap specail stock in quality inspection...

    hi guys:
    I have a query, Is there any possible way to scrap the sale order stock in quality inspection without transferring it to the unrestricted stock and that also through inventory count(mi01,04,07),
    Actually we have damage lighting stock which is received against sale order(automatically transferred to quality inspection), and customers are replaced with new units, then this stock is called back in head office, for this we have a complicated process in use, first this stock is scraped from suppose "a" storage location after transferring it to unrestricted, then loaded back to "a", to make an STR for it from Head Office.
    So is there any way to scrap all special stock(complete storage location) against different sale orders at one go. whether the stock is available in unrestricted, quality inspection or blocked stock.
    I hope I am understood.
    Please help me to get through this complicated process.
    Regards
    Salar...

    Thx you guys are fantastic; I appreciate your help;
    below given is the post which has helped me, but there is some problem at the end, after the click of this point "11. (Click) in the gray box next to the session name and click . " there was nothing to proceed with, though I have posted the count through mi24 and post the difference with mi07, but still want to know what goes wrong with mi31, I have given the appropriate time for back ground processing....one thing to note there were 2 old inventory documents seen to be pending of the same storage location I was posting the count off, is this the reason of problem in processing of mi31,,,,,,please guide...
    Hi Buddy This transaction is used to create physical inventory documents for multiple materials in your plant and storage locations. Inventory documents may be created and printed prior to the count date; however, the posting block should not be set until the day of the actual physical inventory count. 1. From the SAP R/3 System screen, enter transaction code MI31. 2. Click or press Enter. The Selected Data for Phys. Inventory Docmts w/o Special Stock screen displays. 3. Enter or select a value for each of the following required fields: - Plant (enter plant code) - Storage location (do one storage location at a time) - Name of session Remove the checkmark from the Materials marked for deletion field will exclude items previously marked for deletion from the inventory document. The default session name is MB_MI01. Enter your initials and the session number after the default session name to identify it as your own. Example: MB_MI01_WW1 - Max. no. items/doc - use 99 for main storage location; - use 300 for truck storage locations. - Planned count date - enter date of inventory count - Physical inventory number - enter fiscal year followed by plant number and storage location. Example: 2004FY60118071. MI31 Create Physical Inventory Documents (in batch) - Set posting block - check if count is immediate; do not check if creating batch documents ahead of the inventory count date. - Sorting u2013 click on and select Plnt- Stor.bin description-Material. 4. Erase any variants under u201CDisplay optionsu201D. 5. Click . The Batch Input Created for the Creation of Phys. Inv. Docmts screen displays. Enter through any system information messages or errors. 6. Click . The Batch Input: Session Overview screen displays. 7. Click in the gray box next to the session name to highlight row. Click . The Process Session {Session name} dialog box displays. 8. Select the Background radio button. 9. Click . The following message displays: u201CX session(s) transferred to background processingu201D. It takes approximately 5 to 6 minutes for the system to process a batch session. Please wait at least 5 minutes before continuing with Step 10. 10. Click in the gray box next to the session name and click . The Batch Input: Log Overview screen displays. 11. Click in the gray box next to the session name and click . The Batch Input Log for Session {Session name} screen displays. If the batch processing is completed the last line in the Message column should read u201CBatch input processing endedu201D. If this message does not appear on the last line adequate time was not provided for the batch process to be viewed. SAP continues the batch processing in the background. Use transaction MI24 to retrieve a complete list of Physical Inventory Documents created. 11. Record the physical inventory document numbers created. You will need the document numbers to print the inventory documents. Clicking on can print this list. 12. View the log for any errors generated. A material master record being blocked for updates at the time of processing may cause errors. Add the material to a physical inventory document using transaction code MI02. Regrds Yogesh
    Thanks & Regards
    Salar...

  • Table for Customer stock in Quality inspection

    Hi
    In which Table the following is stored
    For current month
    Customer stock in Quality inspection
    Unrestricted use Consignment Stock
    For previous month
    Customer stock in Quality inspection
    Unrestricted use Consignment Stock
    Thanks
    RG

    >
    R G wrote:
    > Hi
    >
    > In which Table the following is stored
    >
    > For current month
    > Customer stock in Quality inspection
    > Unrestricted use Consignment Stock
    >
    > For previous month
    >
    > Customer stock in Quality inspection
    > Unrestricted use Consignment Stock
    >
    > Thanks
    > RG
    Check the following tables:
    MSKU,MKOL
    MSKUH,MKOLH
    Regards,
    Indranil

Maybe you are looking for