Avoid so.ko.1 at all costs.

Scammer, passing on viruses, I believe it's a call that says "URGENT NOTICE - URGENT HELP" upon calling. Accepting the call does no harm, visiting the website is a definite virus.
I do not know the website, nor do I even want to, but it's a robotic voice, unhuman obviously, and the call instructs you to visit a website to get virus protection and to improve your computer speed and the like.
So! If you get this call? Decline, and block block block. If Skype could remove the account and ban the IP from making an accout that'd be lovely but I've no idea if that's even possible. XD.
Juuust a message to the others.

please visit the thread below for instructions and suggestions on how to deal with such unwanted and suspicious activities;
How to Handle Suspicious Calls, Messages and Contact Requests (Scam/Spam)
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Similar Messages

Report to check all cost object balances are Zero in Monthend

Dear Friends,
We are facing an issue in every monthend while doing FI and COPA reconciliation that some balances are left in cost objects. Can any one please suggest any single report if any which will show balances in all cost objects instead of individual reports for cost object. Also suggest tables to be used , Pro and cons of devoloping Z report for this requirement.
Thanks & Regards
Ravi

Check the following tcode
S_SL0_21000007 - Cost Elements: Breakdown by Company Code
This will provide you the balances lying in cost objects.
Regards,
Divraj

Cost Element Report for all cost objects

Hello,
Is there any standard SAP report where it can list down all cost elements, and their line item/total postings done to various CO Objects in one shot.
We have CE/CCTR, CE/IO, etc, but if we can have one report which can list all cost elements and postings done via it to different cost objects - cost centers, internal orders, WBS, etc, might be very handy to us.
Thanks
Balla

Hi Balla,
Please use S_SL0_21000007 for your requirement.
It gives cost element postings to different cost objects.
regards,
makrand

Gather all cost for asset under construction

Hi everybody
Please tell me the way to gather all cost for asset under construction. You can detail as good as possible.
Thanks so much
Ngocpt

Dear Ngocpt,
Internal order is functionality from CO. U can use it for the purpose of collating all the cost. U can also do cost planning in internal orders. This helps u to analyse bet planned & actual cost.
Create IO thru KO01. Once created use it in ur transactions. In your case u can use it in posting any document to AUC.
Also as I mentioned in my previous post that IO can posted with real values and statis tical values. If you want to post statistical vales only then check the box statis tical order in control data.
Whenever passing an entry put ur IO number in "order" field.
Hope this is of use to u.
Regards,
Ajay

Interface for all cost object related transtions with third party system

Hello Guru's
I have one required for Functional Specications i.e, i need to create interface for all cost object related transtions with third party system for this purpose i need to create FS. any body please guide how to do..

Hi sreedhar royals
You need to check controlling tables you need to interact. (CSKS, COAS,....) then ask your abaper and project manager to guide you.
Regards

How do I avoid having to re-download all the software updates for SUS after migrating to lion, I have all the snow leopard/Lion updates saved to disk already

I have recently upgraded from Snow Leopard Server to Lion Server, all works well so far.
I had Snowleopard Server supplying the updates to my Snowleopard and Lion clients with no problems.
I now need to get Lion Software update server running on the Lion Server and would like to avoid having to re download all the updates from Apple
(The updates are nearly 50Gig and my ISP limit is only 100gig for the month).
How do I copy in, an rebuild the updates from my Snowleopard server backup?
I have tried but I think I ran into a permissions problem.
I'm not that experienced yet with the command Line/terminal but I'm getting there.
Any help would be appreciated.

It has to be 10.6.8 I believe, before you can upgrade to Lion. I found some more info, please check out: http://www.informationweek.com/byte/howto/personal-tech/desktop-os/231001728
Be sure all your programms will work on Lion. Power PC programms do not work anymore (eg Nikon Scan 4 will not work from now on on Mac OS X). Some versions of Canon utilities for camera's do not work, Canon still have to upgrade. For an App Compatibility Table: http://roaringapps.com/apps:table

[svn:bz-trunk] 12783: Optimizations around subtopic handling in MessageService/ ActionscriptAdapter, now we avoid calling Subtopic constructor ( which is costly) multiple times.

Revision: 12783
Revision: 12783
Author:   [email protected]
Date:     2009-12-10 06:42:14 -0800 (Thu, 10 Dec 2009)
Log Message:
Optimizations around subtopic handling in MessageService/ActionscriptAdapter, now we avoid calling Subtopic constructor (which is costly) multiple times.
Checkintests: Pass - except the usual 3 failing tests.
QA: Yes
Doc: No
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/services/MessageService.java
    blazeds/trunk/modules/core/src/flex/messaging/services/messaging/SubscriptionManager.java
    blazeds/trunk/modules/core/src/flex/messaging/services/messaging/adapters/ActionScriptAda pter.java

T.code to analyse all costs incurred for a number of sales order

Hi Experts,
Our client is looking for a T.code to analyse all costs incurred after of billing (breakdown of costs) and a transaction that be possible consult several Sales Orders the same time.
Thanks in advance for your support
Regards

Hi Shahid,
You can try TCode
"KKSU-Variances - Cost by Sales Order (I) "
Please let me know if this helps your purpose.
Ranjani.

Delete all cost center

Hi all,
I use LSMW to create all cost center for system. However, all cost center have codename wrong, so I want to delete all cost center and create again. Can I? How by? I have many cost centers so I cant use KS04. Please help me, thanks very much!
P/S: some cost centers have data posting on it.
Regards

Hello Tran,
For cost centers that have data in them you can not delete them. There are two options
1. Block those cost centers : Go to the control tab in the cost center master data and check all the boxes there.
2. In case its a non live system and if you do not have much data then you may delete the transaction data with transaction OKC3 but the problem is that it would delete each and every data posted in CO. After this you can delete the cost centers using OCK4 or KS14. This is not a recomended approach and you should only use it only when you can do away with the data posted if that is very less. In this process you may loose important test data in you need them.
Kind Regards // Shaubhik

CATA for all cost centers

Hi experts!!
I have the following problem:
t-code CATA works just fine if we select the cost centers one by one, but it dows not work if we do not give any cost center on the selection screen, so that it selects all.
Any ideas????
Please help!!!
Thank you all in advance!!!

Hi,
Yes, in CATA no need to select cost centers, once you run this t code , if you have any entries for that cost center it will run for that all cost centers and posted hours to that Cost center.
Try it it may help.
Thanks

Monolingual Software WARNING!!! AVOID AT ALL COSTS!!!!

Hi,
I've been chasing the "missed keystroke" bug and tying everything.
As suggested I tried Delocalizer adn was impressed as it romoved a lot of stuff..but the keystroke problem arose shortly after.
I saw the next thred about Monolingual and gave that a try. Fo those not up to speed this removes non-english or whatever languages one wishes which are rumoored to cause the keystroke glitch.
Anyway I was as throough as can be about reading the instructions and checking only those which I wanted removed and made 3x sure I did not tough anything english or that wasn't clearly non english.
Bottom line I am 2 hours into trying to resurect my PB. Complete loss of any use. It's 10 minutes into a 10.4.5 Combo update just spinning. It appears I will have to completley reinstall my entire system and loss countless hours of work.
BEWARE! This is a dangerous piece of software that doesn't include info on fixes.
The warnings are stock and no indication of a possible complete loss of system. and as I stated no fixes posted on the site.
JUNK!
Warren

Hi,
Well for once I am 100% certain of the cause...Monolingual! I accept part responsibility for even running it.
My gripe is there is not enough info on the site. The typicalo read me has the standard discalimers but I have seen sterner warnings on more benign apps.
My problem now is even getting my PB to boot. It won't start from disc, goes directly to install and chooing startup disc takes you right back there on start up.
Combo upgrade to 10.4.5 which was my OS spins endlessly.
Diskwarrior starts and runs and says alls well but I'm back to spinning after restart.
I don't have much installed, nothing recently and I had just solved some other issues and the PB was operating at high levels across the board..no issues at all.
It's Monolingual, avoid or pay the price like me.
Warren

Worst practices (things to avoid at all costs)

I have read the paper that describes best practices when developing with ApEx.
However, I also happen to think that there is something to learn from bad practices and other "don't"s.
What are the worst design mistakes you have ever seen and would like to point out as pitfalls?

Hi,
1 To extend what Vikas2 has said: Don't try to recreate something created in ANY other application as it appears in that application.
2 Do not try to create an entire application on one page
3 Do not overuse conditions - if there are dozens of conditionally displayed regions and/or items on the page, then you probably should be using several pages instead
4 Don't forget to apply Authorization Schemes to pages when you have applied them to tabs - the user can still get to a page by changing the url
5 Don't ignore users who can not/will not use the mouse - make sure you can tab to everything and press Enter where required
6 Don't overload your page with graphics - this adds to load time as well as hiding the functionality of the page
7 Don't have too many fonts/styles on your pages - stick to one font if possible and use the same style for the same reason on all pages
8 Don't have ANY automatic popups on your pages
9 Don't forget to provide help - either on-screen or as a downloadable doc
10 Don't forget to Protect applications items and page items that you don't want users to be able to change
11 Don't use different Edit etc icons throughout an application - be consistent so that users know what to look for
12 Don't forget to validate data - use javascript AND Apex validations where possible
13 Don't forget to test your application in different browsers
14 Don't attempt to edit a template to try to handle multiple requirements - create one for each
15 Don't recreate the same code in different pages - create procedures, functions, packages etc and use those
16 Don't forget that data can be added into the tables from ANY source, so don't rely on processes and computations on a page to finalise data - use triggers etc
17 Don't enter repeating data on a table - use foreign keys to a lookup table
18 Don't forget to add indexes to tables - especially for columns in reports that are sortable and for those used in joins for SQL statements
Andy

Avoid AMD at all costs! Get intel&Nvidia!

My brand new GX70 cant keep up my buddy's Samsung S7 gtx660m. The reason why....AMD's Enduro in combination with their A10 apu. You can google it, more than two years and they still haven't fixed the issues. In-fact AMD forced companies to removed posts about the issues. CoH2 Beta, Battlefield 3, Borderlands 2, and Guild Wars 2, all have the same problem. They can not fully utilize the gpu on low, med, or high settings. After tracking down some modified 13.6 beta drivers on a Japanese website, I managed to get Borderlands 2 to run between 13 FPS-98fps AVG 28fps on High/Ultra settings w/no PhysX . Guild Wars 2 is unplayable in populated areas even on low settings I average 12fps in the main cities. The integrated GPU actually outperforms the 8970m due to the low gpu usage. I've done clean installs of the 12.1, 12.3, 12.7, 13.1, 13.4 catalyst drivers along with MacHater's Enduro DX9 hotfix to no avail. Tweaked every known setting in CCC and nothing. After scouring the internet for about two days I found out that I am not the only one. Its a known problem that AMD has not addressed. It is also the reason why many of the boutique and other manufacturers have dropped AMD gpus all together. Also MSI locked the bios so you can not disable AMD Enduro with out voiding warranty by flashing custom bios. You have all been warned.

Quote from: Matacks;114828
Yea, I have also found the instructions on using BAR-EDIT lock the cpu to 3.2GHz. But, can't these turbo to 3.5GHz? If there is a way to do this I'd like to know how.
Since I have gone ahead and purchase this thing, I want to be able to use it. I will try adding another 8gb ram. This should work.
http://www.kingston.com/us/memory/search?DeviceType=3&Mfr=MSI&Line=Notebook&Model=84321
i would also like to add and ssd, something cheap like a 250GB mx100 but, I don't really like the idea of having to buy a retail copy of win 8.1. I mean my machine came with windows and j could try to clone the oem version but my os is corrupted.. I'm pretty sure this is due to the crappy HHD it has.. but windows still works. I'm a little torn about what to do about it.
It seems this is the only option to improve performance on this laptop.
No you dont need to buy new windows 8.1 or so just use burnrecovery tool in msi laptop create your USB recovery stick and a .iso version incase you wanna formate usb in future then you can atleast burn .iso's into dvd's then when you bought new SSD just run usb and it will restore your os back to new ssd , also 4700HQ goes to 3.4GHz max and 4710HQ has turbo to 3.5GHz max so depends on which i7 you got.

Should we Avoid QuickTime at all Costs?

Hello, an established and distinguished member of this forum recently said:
"Don't use QuickTime...for anything. Seriously, just completely uninstall it from your rig."
What is some of the thinking behind this view? I know others have also expressed very strong reservations about it as well.
I don't want to start a big controversy or anything, but I would like to get up to speed on this essential issue.
Thanks so much!
Matt
PS: I have a Canon 5D Mark II and shoot in H.264.... Quicktime seems to be intimately involved in my workflow somehow.....

Having QuickTime installed won't hurt anything if you don't choose to use it.
Having QuickTime installed is necessary to import several kinds of .mov files (though Premiere Pro can handle some natively, as in the example that Colin gave)---so, if you are going to use .mov files as source media, you need QuickTime installed.
Exporting to QuickTime is sometimes required by some clients. Though you may try to dissuade them, the client is (usually) the boss.
If you have a choice, and you care about color fidelity, don't export to QuickTime. QuickTime has a jumbled, half-implemented way of kinda-sorta doing color management. This method doesn't even work reliably within Apple software, meaning that people can't roundtrip media just within Apple applications with consistent color in some circumstances. This absolutely bedevils us, as we keep trying to hit this moving target. Any time someone tells me that our color management system isn't working, I _know_ (well, strongly suspect, anyway, with a very high rate of being right) that they're using QuickTime media.
Because QuickTime is a 32-bit software component, we had to create our own intermediate process (QT32 Server) to communicate between QuickTime and the 64-bit Adobe video applications. This component can diminish performance but, more to the point, it can be the source of some other problems. The one that springs immediately to mind is the fact that aggressive firewall programs seem to hate QT32 Server, as described here:
http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html

Chat & Vision - AVOID AT ALL COSTS!

Whatever you do, never do business with Chat & Vision. I in absolute awe of the performance of this company - easily the worst I have ever seen. I placed an order a month ago and they still haven't shipped it. I have exchanged 20 notes with them, and they are totally incompetent or fraudulent. NEVER do business with them. NEVER!

Hello,
I have asked Chat&Vision to contact you urgently.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Avoid so.ko.1 at all costs.

Similar Messages

Maybe you are looking for