Avoiding keyframe problems in premiere

Hi everyone
Recently I made my first video with premiere. I had a problem when I tried to open a saved project related with the keyframes. I searched a bit and found out that it was related with the language of the saved project so instead of using the correct form between the numbers of the keyframe (z.,z.,z.,), the project was saved using only dots (z.z.z.).
As my project had few keyframes and was an easy one, I decided that remaking it and processing the video was easier, so that's what I did.
Nontheless, I'm worried about my next projects, as I pretend them to be more complicated and intricated than this one. So my question is, is there any way to avoid that format-saving problem? Can I configure the program so I don't have to worry about it any more?
I'm using Windows 7 (x64) and Premiere Pro CS6.
Thank you very much in advance.

Hi Yo1980,
Sorry. iCloud is what is causing the issue, as all was fine until a recent update from Apple. We know about this issue, but are still working on a fix. For now, you may need to uninstall it or run it on a separate computer or device.
Thanks,
Kevin

Similar Messages

Problem with Premiere always conforming Audio again & again

I've got a problem with premiere CC which is always conforming audios time & again & again. Although this problem is not new in Premiere and I did face it in previous versions. But I've never found a good way to avoid it, especially when I work with much heavier clips or with some formats like mpeg or mov....
What should I do? Is that a network issue?
Thanks, Jim.

No Antivirus.
Audio is 5.1 audio from the video AVCHD, and music tracks are mp3 files.
Hardware: Intel i7 970 hex core processor, system drive (C:) 600GB 7500rpm, data drive (F:) where audio and video files are stored 10000rpm 500GB velociraptor, NVidia GTX 470 video card.

BIG PROBLEM BETWEEN PREMIERE PRO CS6 and FAST TRACK PRO

Hi there...im running premiere pro cs6 on macbook pro 2010 with 8 gb of ram...im editing a project of hd material from a canon 5d..i got all the sound from an external recorder, all the sound is already syncronized... i need to do some cleaning on it....i got an USB fast track pro from M-audio that work well....
the problem is this : every time i have to send a clip to another aplication for the cleaning of the sound( audition with dynamic link or soundtrack pro exporting a .wav file) after a while (it can be a couple of minutes or more) i listene a clic on my headphones and the sound goes back to the speakers of the macbook pro, after that i must reconfigure again the audio hardware and audio output mapping again ( this happen almost with every clip and only between audition and premiere) anyway i started to use soundtrack pro to avoid this problem... but what is happening now is that many times after i listen the clic on the headphones or after im tryng to go back from one audio application to premiere, premiere freeze out or shhot down....
the poject is kind of big and restart premiere 3 or 4 times in an hour of job in my mac book pro its not what i call a productive hour oj job...
somebody have the same issue??
please let me know becouse im starting to get really mad...
anyway ill post also in the m- audio website to check it out over there
thanks in advance

Hu Simon...thanks for the answer but how i already writed in my post im on a macbook pro(internal audio card are out of the question)...
anyway are you suggesting that adobe doesnt work well with usb audio devices???
becouse for now i have to stick with it....
if somebody got a suggestion please let me know

What are the best coding technics which will avoid performance problems

Hi Experts
What are the best coding technics which are avoiding memory problems and performance problems
Some times one of few reports are taking too much time to executing while handling large data.
1.What are the best way to declare a internal table to avoid performance problems.
2.what is the best way to process data.
3.what is the best way to clear memory.
Can you guys help me give some good suggestions for writing better programs to avoid performance problems.
Thanks
Sailu

Hi,
Check this link..[Please Read before Posting in the Performance and Tuning Forum Updated |Please Read before Posting in the Performance and Tuning Forum;
Which will be the first thread in the Performance and Tuning Forum.
Search the SCN first.

How to avoid performance problems in PL/SQL?

How to avoid performance problems in PL/SQL?
As per my knowledge, below some points to avoid performance proble in PL/SQL.
Is there other point to avoid performance problems?
1. Use FORALL instead of FOR, and use BULK COLLECT to avoid looping many times.
2. EXECUTE IMMEDIATE is faster than DBMS_SQL
3. Use NOCOPY for OUT and IN OUT if the original value need not be retained. Overhead of keeping a copy of OUT is avoided.

Susil Kumar Nagarajan wrote:
1. Group no of functions or procedures into a PACKAGEPutting related functions and procedures into packages is useful from a code organization standpoint. It has nothing whatsoever to do with performance.
2. Good to use collections in place of cursors that do DML operations on large set of recordsBut using SQL is more efficient than using PL/SQL with bulk collects.
4. Optimize SQL statements if they need to
-> Avoid using IN, NOT IN conditions or those cause full table scans in queriesThat is not true.
-> See to queries they use Indexes properly , sometimes Leading index column is missed out that cause performance overheadAssuming "properly" implies that it is entirely possible that a table scan is more efficient than using an index.
5. use Oracle HINTS if query can't be further tuned and hints can considerably help youHints should be used only as a last resort. It is almost certainly the case that if you can use a hint that forces a particular plan to improve performance that there is some problem in the underlying statistics that should be fixed in order to resolve issues with many queries rather than just the one you're looking at.
Justin

Problem with premiere elements 4.0

i am having
problem
with premiere elements 4.0. it keeps on crashing and when i put pictures on the timeline it comes up black. when i try to preview it either it shows black or sometimes the picture but i cant see it to delete if i wanted to. also it gave me a message something like that adbe is running low on memory and i should be caution

This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Strange audio problem in Premiere Pro CS6

Hi
I have encountered a very strange problem. I am editing a documentary film in Premiere Pro. All material has been shot on the Sony FS 100 camera - imported into PP with the Media Browser. In one interview the last part of a clip has corrupted audio. At one point on the timeline the audio stops playing, and it sounds like a scratch on a vinyl record - two words repeating themselves to the end of the clip (See screenshot of timeline). The images are as they should. When I open the Avchd source clip in VLC the audio is working. When i Import the clip into Final Cut 7 using Log and Transfer the audio is working. My only other option would be that there is a software problem with Premiere Pro CS6. Any ideas of how to fix this issue?
Version PP: 6.0.1
Source footage: MPEG-4 AVCHD (1080/25p - Sony FS100)
Version mac: OS x 10.8
Model Name:     Mac Pro Mid 2010
Processor Name:     Quad-Core Intel Xeon
Processor Speed:     2.4 GHz
Number Of Processors:     2
Total Number Of Cores:     8
Memory: 20 GB
Graphics Card: NVIDIA GeForce 570 GTX
Third-party I/O: Matrox MXO2 with Max
Mercury Playback Engine: Software mode

One similar, potential problem, that can develop, is when the Conforming process is interrupted, before it completes 100%.
A quick way to rule that out, would be to navigate to the Media Cache files, and Delete the CFA and PEK (Waveform Display) for that Clip, outside of Premiere Pro. Then, when you launch PrPro and Open your Project, the program will recreate both of those files. There is a little progress bar, that many do not notice. Let it complete 100%, before even touching the computer. Test.
I hope that it is as simple as that.
Good luck,
Hunt

Preview lag problem on Premiere Pro CC 2014

Hi everything!
I have a big problem on Premiere, when I work on every type of file the Program monitor lag too much.
I can see one frame every few second!
But the audio work well...
It seems that the computer have not enough power to show the video! And I have not modified or applied effect or transition!
I have got a MacBook Pro Early 2011 with the AMD Radeon HD 6750M (1024 MB) with the OpenCL 1.2 Engine, 2,2 GHz Intel Core i7-2720QM Quad Core (With Multithreading to 8 Core), 16 GB 1666 MHz RAM, with a Magnetic Disc (No SSD). The Machintosh is equipped by OS X Yosemite, reinstalled last week to try to fix the problem.
Before installing the CC 2014 I used the CS6 for 2 years without problem.
In Project Settings i have active the Mercury Playback Engine, and the other settings are not changed!
Someone had the same problem? Or know how to resolve? Because is not easy to use in this condition!
Thank you very much, Andrea.

Hi!
Thank you for the answer!
My source footage is 1080 50p AVCHD (from Panasonic AC-AG160AEJ), but the problem is on every type of footage, because I tried with a 720 50p from a Canon EOS 6D and the ProRes 422 1080 25p of BlackMagic Production Camera 4K.
The problem doesn't change with the weight of the footage, with all of the footage type the problem is the same.
I use the original 7200rpm 750GB hard disk connected with the SATA interface. I think that is SATA 3 at 6 Gbit/s.
I have tried with all playback resolution possible (Full, 1/4 and 1/8) but the problem doesn't change, even if I change the resolution.
Unfortunately with the format of last week I lost the CS6...
I'm writing from Italy and I use the PAL standard!
I attach a video of the problem and a picture of my graphic card, if they are usefull!
Video available at this link:
Lag Problem.mov - Google Drive
Thank you Ryan!

Hey!. I have a problem Adobe premiere didn´t appear on my crative cloud, I don´t know what to do!

Hey!. I have a problem Adobe premiere didn´t appear on my crative cloud, I don´t know what to do!

Rajshree is correct, 64-bit apps don't appear in the Creative Cloud app on a 32-bit computer/OS. We have this document about this issue here too: http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

Problem with Premiere Pro CS5 project files bloating

Has anyone had the same problem that we're experiencing? - we have Production Premium CS5 installed on a machine with Win 7 Pro x64. We have three separate edits all of which are experiencing bloating of the .prproj project file. Often this bloating seems to occur when no importing of assets has occured, just changes in the edits. A project which started at 5mb has bloated to 1.5GB and we can no longer save it. Another project has bloated to 200mb and continues to grow in size. We have not brought in any weird assets, although we are using hi-def footage.
We upgrade from CS3 and never had this problem using Premiere CS3.
We can't fix the problem by 'remove unused footage' as this doesn't reduce the project size, although it does remove the unused footage.
We can't fix it by importing the project into a new clean project as the problem and huge file size just comes with
We can't fix it by using the project manager to collect up the project as it requires to save before collecting and the problem files can't be saved.
A couple of points to note - these projects were originally on Premiere CS3 and were upgraded to CS5. The footage is either Sony EX3 or Canon 5D - both HD.
The machine it's running on has 8gb of RAM.
Currently the projects I'm working on are gradually grinding to a hold with no way to make the files usable again.
Any suggestions are greatfully recieved as I'm at a loss. I've reported this to Adobe, and will report back if I get anything useful.
thanks.

natswilson wrote:
TClark,
I'm shocked that you are having the same problem on a mac. This seems to suggest a problem that could be really widespread. You've also beaten my 1.5GB file bloat size.
What the hell is going on with Premiere Pro? I'm surprised to have heard nothing from Adobe either via my support request or on this forum, save for Jeremys useful work around, considering how serious an issue this is.
I've had to break all the projects I'm working on which have multiple timelines in each project into a new seperate project per timeline in order to reduce the file bloat problem and reduce the risk of me loosing all my work in one go on a bloated file.
Adobe - we could do with some help here. It's frustrating to have spent so much money on licences for this software only to have virtually non-existant help when a serious flaw in the software manifests itself.
Nat
Yeah...it's really a bummer that no one is acknowledging it. It's pretty serious!
I hope Dennis jumps in soon!

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps freezing and Crashing. A simple thing like leaving the project idle for about 15 minutes, you come back and find that it has frozen. Also if you drag out a clip on the timeline you will find that the whole application freezes. Any possible solutions would be much appreciated.

Could be several factors at play here. This ARTICLE might give you some tips on getting your computer ready for an editing session. Note that there are some added tips on Win7, thanks to Black Viper, near the end.
If nothing is helping, then the tips in this ARTICLE might help you find some clues amongst the breadcrumbs left behind with a hang, or crash.
The link in this ARTICLE will give you some general troubleshooting tips.
If nothing improves, then please post back with more details. This ARTICLE will give you tips on what would be helpful.
Good luck,
Hunt

Audio volume problem in Premiere elements 12

How can I reduce or increase volume in the soundtrack???

Sorry for my English but I hope you understandthe following.
I have for the moment no time to go through your comments and ideas, but I certainly will do the coming days.
For good order I’ll explain my problem more in detail: (working with Window’s 7)
When I use Tools>smartmix, I change Audio 1 in “forground”, Comments in “foreground”, Soundtrack in “Background”, Audio 2 and 3 in “Background”. So far so good!.
Next step is: edit>preferences>audio>smartmixer, and the only thing I can change is “milliseconds (i.e. 10)”, “mix pause (i.e. 5 sec)”, and “reduce background in % (i.e. 90%)”. So far so good again!
The volume sound of the audio track is indeed reduced when there is a conversation in the clip, but not enough, so still too loud, certainly when the conversation stops, the volume sound is far too loud.
What do I want:
a) Remain the original volume from the conversations etc. in the clip, so don’t change anything in here.
b) Reduce the volume to the level I like!
I realise, this looks an easy and simple question, but I can’t fide out hou too lower only the volume in a soudtrack!
Waiting your reply and many thanks in advance
Regards
P.Gans
Van: A.T. Romano [email protected]
Verzonden: vrijdag 10 januari 2014 4:05
Aan: Maauwtje22
Onderwerp: Audio volume problem in Premiere elements 12
Re: Audio volume problem in Premiere elements 12
created by A.T. Romano <http://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <http://forums.adobe.com/message/5999094#5999094

Can I avoid this problem?

Hi all,
I made a game by flash and projected it into .exe file. It
runs correctly excepte one thing.
In this game, I used onEnterFrame and setInterval to make
counters to coundown and do something.
But when player holds down the movie's title bar by pressing
down the right mouse button, the movie stops redrawing.
So onEnterFrame and setInterval stop doing their jobs.
Does anyone know how to avoid this problem?

HI ,
can anyone help me?
I am confused whit this problem for a long time.

Problems with premiere Cs5.5

I am having more and more problems with premiere CS5.5... I am running it on a windows base system. It freezes all the time and now I am not able to render... can someone, please, enlight me why? I am not using creative cloud, just the old set up... thank

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Mask problem in Premiere Pro CC 2014

Hello!
I have a strange problem with the mask tool in Premiere Pro CC 2014, and made this video to explain the problem.
Hope someone can help me.
Thanks a lot
/Per Haar
Mask problem in Premiere Pro CC 2014 - YouTube

But the whole point is that I am not able to place the mask properly because of the strange way it behaving. The purpose of a mask is that it should affect the area it is located above and not somewhere else, and it should also fill the entire mask and not only a spot at the center of the mask area.
It has nothing to do with the order of things, or if I turn up feathering or extract the edge. It's all about the wired way it applys it self.
If I apply and drag the mask to the corner, it should affect the corner and not somewhere near the center of my footage. As it is right now I have to zoom out to 25% and drag the mask way out of frame to affect the corner of my footage.
/Per

Avoiding keyframe problems in premiere

Similar Messages

Maybe you are looking for