Avoiding leaving outline or selected area after changing exposure

Hi,
Hope this finds you well.
I am trying to lower the exposure in an area of a photo by selecting it and than playing with the exposure. Regardless of the selection tool I use, it always leaves a mark or outline of the selected area because the exposure in that area has changed.
How can this be avoided?
Thanks.

Sure, as you can see, there are noticeable lines around the lamps in the front left that were left over after selecting the area, adding an exposure adjustment layer and playing with the exposure.

Similar Messages

Photo Display being Black after Changing Exposure

Hello,
lately, when i change image adjustments the preview image shows up as black, whats going on?

Any ideas? It works fine but each time i change Exposure for example, the image becomes black, but when i resize it it comes back up, its really annoying!

Internet very slow after changing my previous airport extreme to my new 2T TC

Hi,
I just got a new 2T time capsule to replace my Airpot Extreme that worked fine. After installing it I chose to import a previous wifi network to the new TC and my internet became very slow. I read a few online documents sugesting that the internet slows down when backing up large data, but I dont think it is backing up (I did a force quit on systems preferences that "froze" with the cursor becoming a spinning ball) and after that tryed to restart my mac pro, but it has been recovering space from file vault for 2 hours. I am trying to access the internet from my mac air, but the speed is 10% of what I usually get.
Any suggestions? Starting to regret getting the TC, I had high expectations about it.
Thanks
Rubens

Thanks William.
I got help from Apple by phone and aparrently after importing the old airport extreme configurations, my time capsule ended with wrong "Radio channel selection" and after changing the 2.4Ghz to 9 and the 5Hhz to 157 the internet connection is back to normal. thanks

Elements 7 print selected area only

Have just upgraded from Elements 4 to 7.
Under old version I could easily print a small rectangular selection from a possible A3 print for evaluation before printing the whole thing. There was an option after File>Print to 'Print selected area', after first making a rectangular selection on the image.
Perhaps I am missing something but I cannot find an equivalent command in Elements 7.
Couls someone please enlighten me? - Thanks.

Hello Nicole,
Thanks for that, it seems strange that such a useful feature was discontinued - A3 size paper and ink is too expensive to just run tests. Once or twice, having marked a selection using the Marquee tool, I have found that if I click on 'custom' size the selection only will appear in the print preview. Unfortunately it does not always happen and I have no idea of the criteria required to make it do this on demand.
Cheers.

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

Prompt constrain - prompt values are not refreshed after change in calendar

Hello,
I have prompt with Date, OrgUnit and Employee field in OBIEE 10g.
Date - calendar component "date between"
OrgUnit - multi-choice
Employee - multi-choice
I have checked "Constrain" checkbox on Employee field, because I want to show only employees from selected OrgUnit and also I have checked constrain on Date field.
After first selection everything works fine. I select some dates (I have calendar component - date between), some OrgUnit and I can see list of employees constrained by selected OrgUnit and Dates
- physical select is executed to get list of employees to multi-choice component
After that I change date interval, open employees multi-choice component but no physical query is executed and I will get back some cached result from previous request.
It seems that change in calendar component does not force refresh of data in other constrained components.
If I select some other OrgUnit, Employees are refreshed.
I tried to change component for Date from calendar to multi-choice. After some change of dates in multi-choice component. OrgUnit and also Employees are refreshed.
I also tried some different combinations of constrain checkboxes but with no success
So my question is: How can I force refresh (force execution of sql query) data in constrained fields after some change in calendar component?
Thank you

In my case It doesn´t refresh after change in calendar component. It does refresh after change in multi-select promot, or dropdown component, but doesn't refresh after change in calednar component.
BI server cache is not enabled.
If I open employee multi-choice component for the first time, physical query is executed. I change date to some other, open employee component for second time and no query is executed and I will get old values from previous action...

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

Avoid marking files as modified by Git when there are no changes

Hello,
I am working on a project using Visual Studio 2013 Ultimate and Enterprise Architect 9.0 (a UML tool). I am using Git for Source Control in Visual Studio.
I have set up the programs so that I can synchronize code from Enterprise Architect (EA) to Visual Studio (VS) and vice versa using MDG Link for Visual Studio (an Enterprise Architect add-in). I first synchronized all the existing code from VS to EA.
Now I have the following workflow:
Create UML models in EA;
Add necessary attributes and operations to the class models;
Synchronize models with the code, which will add the added attributes and operations to my source;
The last step will regenerate all my source code files, but even if there are no changes Git marks the files as modified.
How can I avoid this behaviour, because now all my files are modified when Enterprise Architect synchronizes the model with the source code.
I only want Git to mark it as modified when there are actually things added or modified in the file.
Any help will be appreciated.
Marcel

Hi,
I think it's more VS which detect the file was modified, and by default it mark the file as modified in Git.
But normally when you want to commit your work these files are removed because Git detect the files are not really changed.
Did you try to refresh the pending changes in the team explorer (F5). Perhaps Git recalculate all the differences, and then detect the real changes.
Regards,
Yan Grenier
Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles.

If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?

If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?

If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper; in others one is created for each song. Why? How can I get one image per album every time?

Is it possible to make changes on object selection area???

Hi friends,
I wanna ask a question about portal.
When we connect to portal we choose corporate documents , there are files of departmants like hr, it, corporate general ...
We want some changes in object selection area of these files. For example when we get into object selection area of IT there are objects like favorites, others, personel documents, common document, common documents.
My question is
Can we deduct or hide some of these objects from object selection area? If we can, how can we do it?
Thanks
Muzaffer Öz
Edited by: Muzaffer Oz on Dec 2, 2011 9:31 AM
Edited by: Muzaffer Oz on Dec 2, 2011 9:44 AM

Hi,
We can hide those options by implementing the Layoutsets. If you need to hide those options for standard admin user itself, then you need to change the standard Layoutsets, which is not recommended. These options are defined in the "Command Group" of the Layoutsets.
You can Navigate to Layoutsets thru below path.
Sys Admin -> System Configuration -> Knowledge Management ->Content Management -> User Interface -> Settings -> Layoutset
Tweaking over the Layoutset Command group properties will hide the options which you mentioned.
Thanks,
Mahendran B.

Double click select all does not work in web site's search area after going back.

After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.

Bugzilla has a different login system, unfortunately.

I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not > 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not > 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

We had to change the feed adress and the epsiode adresses. Now all the episodes of my podcast are downloaded (although i have downloaded them already). How can I make the changes in my feed and avoid that all the episodes are reloaded?

Hello,
We had to change the feed adress (<itunes:new-feed-url>)and the epsiode adresses in the feed because the feed and the episode-files are on a new server. Now when i open my iTunes subscription of our podcast all the episodes of my podcast are downloaded again (although i have downloaded them already).
My Question therefore is: How can I make the changes in my feed and avoid that all the episodes are reloaded?
Maybe have an answer?
Thank you very much.

Thank you very much for your answer
As I see now, our 'guid' tags contain the episode URLs
To avoid this problem in the future i would like to change guid tags. Can you please tell me how a guid tag should look like if it is not the URL?
Thank you for helping us!
ps now it looks like this eg:
<guid isPermaLink="false">http://www.castyourart.com/podcasts/213_thinkglobal_en.mp4</guid>

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.

Avoiding leaving outline or selected area after changing exposure

Similar Messages

Maybe you are looking for