Avoiding sync issues?

i seemed to have a lot of sync issues in MobileMe and have less but still reasonably frequent issues in iCloud. last week i discovered that i could trash the PLIST for bookmarks on a computer that had old and not recently sorted bookmarks so that when i took this computer off of bookmark sync i could check "Merge" which is the only option to check when re-syncing bookmarks. in the past i had a set of bookmarks on my laptop that were sorted (after spending two hours sorting them) and then after a number of days i found out they weren't syncing to my desktop. after trying all the solutions i would uncheck sync bookmarks on the desktop and then when i re-synced bookmarks my only option was to "Merge" or not re-sync the bookmarks. both options had unhappy results with "Merge" causing me to resort everything again.
long story i know but i am describing this in order to just see if there is anything i can do on my end to avoid these sorts of issues.
in the future i will be manually deleting PLIST files before re-syncing but ideally i would not have to do this at all.
is there anything i can do to avoid this?
currently i am running most recent iOS on the iPhone, Mavericks on the laptop and i can only get up to Mountain Lion on the desktop or i might upgrade to Mavericks on the desktop.
thansk in advance for any help.
i do BTW love my mac hardware and software after moving back from PC.

Hi Haus,
Welcome to the Sony Community!
Thank you for your message. Regarding your inquiry, yes you can use to headphones in one room but with two different TVs. About the crossover, there is a possibility that the audio signals will cross with each other, that would be the job of the Channel switch on the headphones' transmitter. When you're going to use both headphones try changing the channels and find a better reception.
If my post answers your question, please mark it as "Accept as Solution"
Regards,

Similar Messages

  • Syncing issues and avoiding losing at&t unlimited plan if restore is used

    I am suddenly having syncing issues when I try and sync my 3G ipad.
    I am not sure what has caused this. I did take advantage of last week's software update. Now, when I turn the ipad on, there is a graphic of a serial cord, and when I do get it to connect with itunes, it urges me to restore
    the software.
    I was one of the early purchasers of the ipad, and so qualified for the AT&T unlimited flat rate per month plan. I don't want to lose this subscription.
    I had an Apple express appt. this morning, but never received the phone call!
    I even tried to cancel it online after 30 minutes elapsed, but received the message that the "communication was unavailable!"
    I am wondering if anyone with this special plan has gone through the restore process, and if that ended up wiping out your election for the 3G plan,
    and caused a hassle for you. I like having this $30/mo plan and don't want
    to lose it. Thanks in advance for any advice.

    One other person posted that he lost his plan during the update. If you loose your plan all you have to do is call AT&T to get it reinstated. SInce your iPad says connect to iTunes, you have to restore your iPad. You have no other choice.

  • More Aperture/iPad syncing issues

    Each time I create a new project or album in Aperture, I have trouble getting the images to the iPad when I sync. I sometimes need to sync several times until the images are recognized and imported to iPad. I do have the albums designated manually, rather than all, which means I have to sync and then sync again after I check the checkbox for the new album. I understand that, but sometimes I have to go back into Aperture to make sure the previews are updated. If I choose to update the previews for a project, Aperture will usually tell me that they're already up to date, but often they will not show up on the iPad, even after I check the appropriate box for the album in iTunes. Sometimes I get good results if I delete the previews and regenerate them in Aperture.
    The second problem is the sort order. Even if I have "sort by filename" selected in Aperture, they do not show up in this order on the iPad--despite what the support article says about this. They appear to only show up in Date order. I've tried repeatedly resetting the sort order, but it does not change on the iPad. Sometimes I have to delete the album from the iPad, (uncheck the album in iTunes and sync again), then recheck it and sync yet another time. This does not always work, however.
    It is very frustrating. The interface between Aperture and the iPad is very wonky. I often have to sync repeatedly, just to get the photos on the iPad and even then they're usually in the wrong order.
    Aperture appears to have two types of previews: "previews" and "sharing previews," but "sharing previews" don't seem to appear in the documentation. I've noticed that, even when Aperture says the previews are up to date, when I exit the program, it will sometimes (but, maddeningly, not always), give the message, "updating sharing previews" before quitting. I cannot figure out how to force this, however. Sometimes opening and closing Aperture several times will cause it to do this, but I can't be sure.
    iTunes seems to have its own process in which it "optimizes" images for importing to the iPad. Like Aperture's mysterious "sharing previews," "optimizing" does not show up in the iTunes documentation or help files.
    This process either needs to be improved, or at least documented so users can understand how to avoid these problems.

    1. Some people have reported slow syncing with anything but the iPad's own USB cable (e.g. using a US cable from an iPhone/iPod). Try different cables
    2. More work - disable iTunes syncing completely, then re-enable a bit at a time, e.g. one movie at a time, one playlist at a time, one photo album at a time. There are periodic reports of syncing issues caused by a bit of media that's been corrupted, and this (tedious) approach allows you to identify where the problem might be.
    3. If that fails, do a clean restore back to factory settings, then progressively re-enable syncing as above.
    Hope this helps

  • Myriad iTunes sync issues - song cutoffs - artwork problems - yeech!

    Hi all,
    I’m running the latest version of iTunes on a (late 2013) Macbook Pro Retina laptop, and having several different flavors of syncing issues with my two devices –  a 16 gb iPhone 4S running iOS 7.1, and a 32 gb iPod Touch 3rd Gen running iOS 5.1.1.
    As best I can tell, some syncing issues such as one of the ones I am experiencing (songs chopped-off when transferred and attempted to playback from the device) have existed in some way, shape or form for nearly 10 years now, so I’m not expecting any grand revelations here - but just looking for some honest advice on how to resolve in the shortest amount of time & with the least pain considering I have a fairly large music library in terms of syncing time required.  That being said, below bulleted-out are my current issues / frustrations / thoughts on where the problems may lie.   I would appreciate any advice:
    Purchased iTunes songs (ripped MP3’s from CD’s that I own and tracks from other sources do not seem to have the problem…) play fine in iTunes on my laptop, but when transferred to either my iPhone or iPod, they will randomly (it’s not every track) be cutoff near the end of the song.  Sometimes the song will stop with 2 minutes remaining and go silent. Sometimes it will stop with 15 seconds remaining and go silent.  Sometimes it will stop somewhere in that time range and start the next track on the album while still displaying the info from the previous track.  The only solution I have found to this for purchased content thus far is to wipe everything out, and go back and download the tracks from the cloud.  I have somewhere in the neighborhood of 1000 tracks that fall into this category, so my options to download directly to the device an artist at a time are kind of time-consuming and cumbersome.  Would this have something to do with the file format of purchased tracks vs. ripped ones? I have a lot of older ripped material that was imported as MP3’s or MP3’s converted to M4A’s that never seems to have this problem.  The newer purchased files are mostly ACC’s which DO have the problem.   Also would this have anything to do with the fact that my library (including most of the purchased content) was recently moved over and imported to a new Macbook from a Windows backup?  Most of my iTunes library was Windows / PC for the majority of its existence for the past decade or so; we only recently switched back to Mac.
    Discrepancies between deleting material on a device vs. what iTunes recognizes when it is plugged back in:  The other day, being frustrated with the random song chopping, I deleted everything on my iPod Touch 3rd Gen by going into Settings, Options, General, and “Usage” and then “Edit” and selecting to wipe out everything in iTunes. The device appeared to do this, and I was showing 28 gb or so free out of 32 once it completed.  Great, right?  I proceeded the rest of that day to painstakingly download approx. 900 tracks from the cloud onto the device, hoping to correct the chopping issue.  It did this, and I still had roughly 10 gb free. Great, right?  Later that night when I plugged the iPod into my Macbook with the 30 pin to sync, iTunes on the laptop for some reason still recognized the songs which I thought I had deleted hours earlier and showed me multiple copies of everything.  For the ones that had been deleted, when I clicked to play them on the iPod through iTunes, I got the little gray exclamation point - ! – in a circle like when a track has moved libraries and cannot be found.  iTunes then told me my sync could not be completed due to being over capacity on the device by a ridiculous 12 gb or something like that. Huh?? I could have gone through and manually deleted the (by that point more than 1000) duplicate tracks and synced to have made room I suppose – but after accidentally hitting Autofill – iTunes threw up its hands and would not let me do anything further.  Any attempts at that point to delete either pending Autofill tracks or missing duplicate tracks just led to endless spinning on the “Preparing Update” notice on the device which led to me having to kill iTunes.  Can you say big-time frustration?  I eventually opted to restore the iPod to factory (iOS 5.1.1) settings and start over.  That device is currently at home slogging through the process of attempting to re-download 400 some songs from the cloud over wi-fi so that I can avoid the cutoff track problem.  The plan after that is to sync playlists for certain artists over top of the purchased tracks so that my ripped tracks can merge with them to round out the playlist. Do you see how this is beginning to become a marathon?  
    Last but not least - it seems to be just since the last few iTunes upgrades for Mac, but I’m having a huge problem suddenly with album artwork staying synced properly. After one recent manual transfer session (30 pin between the iPhone and the Macbook) roughly half of the tracks I transferred had mismatched artwork.  Doing this through the cloud (downloading tracks “Not on this iPhone” via the iTunes app) doesn’t seem to have the same problem, but of course this takes longer. Also, what is the deal with “Show All Music” in iOS 7 and playing tracks from the cloud?  This is a really cool feature that allows you to save a ton of disk space on your device, but I have found that when I do this that many tracks have mismatched artwork.  For example right now I’m listening to a Grateful Dead song that is displaying Genesis artwork.  Huh?? Artwork is less of a big deal than the track lengths being chopped off, but it’s still annoying.
    iTunes revolutionized the music industry and on the whole has been fantastic.  But it seems as if lately, little irritating problems like the syncing issues are becoming more and not less prevalent, and the problem is they aren't being dealt with.  I got my first Mac in college nearly 20 years ago now, and have been generally entrhalled with Apple products ever since.  But I have to say that this kind of junk lately is more what I would expect in the vein of problems from the shoddy-PC world that seem to linger and never get fixed.  Cupertino folks - what's the deal???

    You're not the only one judging by the forums!
    Likewise I have been using Apples since the Apple IIe(!) and have found them great in every respect. iTunes however over the past couple of years has deteriorated to th point of being unuseable. Apple has made iTunes the hub of your digital life and so it really has to work seemlessly.
    I currently have had to completely wipe and re-install my 64Gb iPhone 4s several times to get my music back on to it. I cannot het any playlists to sync which is really annoying and it generally undermines my faith in Apples software quality.
    Please put whatever resources are necessary to fix this soon Apple or you will certainly start to haemorrhage customers to other platforms. After all if iTunes remains broken then what's the point of paying the extra for Apple qulaity? You may as well uplaod ebverything to Google play and be done with it!

  • TIMECODES are important for audio and video sync issues

    Hello, just wanted to pass on what I learned so that others can avoid the trouble that I've had to go through. Perhaps this may help someone who is stuck on the launch pad. :)
    BOTTOM LINE: Info for the beginner. Audio and video not in sync in Premiere Pro CS3 V3.2.0
    PROBLEM: Capture works great it seems. When I go to the folder that contains the captured file and view in Windows Media Player audio and video are in sync. BUT when viewing the video asset in the source and program monitors, the audio and video are not in sync.
    SOLUTION:
    Before capturing a tape make certain the following is checked:
    (1) Edit->Preferences->Capture->Use device control timecode
    (2) Edit->Preferences->Device Control->Options->Timecode Format
    (3) Project->Project Settings->General->Video->Display format
    As for the devices timecode choose something other than Auto Detect. Then match the project timecode with what was chosen during capture. The projects display format could of course be set to frames.
    I searched everywhere for audio and video sync issues in google, adobe forums, F1 help, and hv20.com and everyone was talking about:
    (1) Presets: 1080p30 vs. 1080i30 (60i).
    (2) brakes in the tape where timecode for the audio and video get misaligned during capture.
    But choosing the correct hardware settings and timecodes to solve audio and video sync issues never popped up.
    MY HARDWARE: Canon HV30, HDV

    >Audio and video not in sync in Premiere Pro CS3 V3.2.0
    Must be an HDV only issue because my synch is always perfect.

  • Anyone noticed Quicktime 7.4.5 causing out of sync issues for online vids?

    Since 7.4.5 all Quicktime video clips I view online in Safari have audio out of sync with the video (by perhaps four frames). Anyone else seeing this?

    I do not use Safari. However, I have no problems w/out of sync issues using the +latest versions+ of FF, Camino & Netscape.
    Have you tried other browsers to rule out Safari as being the culprit rather than QT? Are you using the latest version of Safari?
    What troubleshooting methods have you tried to resolve your issue? Need this info to avoid the +"been there done that"+ senareos.

  • Sync issues after iOS 8 update

    Hi,
    I have an iPhone 5S, 64 GB. After updating to iOS8 I got sync issues. "Waiting for changes to be applied" never disappeared. Also the storage usage in iTunes 11.4 is wrong. iTunes said I had 6GB free, when I had in fact 20GB. I restored the phone back to firmware, restored the backup. All was fine until I made setting changes in iTunes what I want to sync. The same issue in iTunes is back again. I already deleted my voice memos as someone recommended in another threat but that didn't help.
    Any ideas how I can solve the problem, would be appreciated. Thank you!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Disappearing Contacts, Mobile Me Sync Issues, Calendar crash-Answers??

    I'll try to keep this post brief but hopefully it will help provide some possible answers for frustrated users experiencing the random complete wipe out of all contacts and calendar data when syncing with mobile me using either push or fetch. After several weeks of experiencing these random sync issues and spending several hours over several days between tech support calls with iPhone then Mobile Me support and then finally a genius bar appointment where the genius said he didn't have a clue and simply offered to replace my phone.
    The next morning, SAME PROBLEMS... and through it all NO ONE could tell me why my sync was so randomly unreliable. Every other day for no apparent reason, my phone would suddenly lose all contacts and/or calendar data. (A few thousand contacts and two years of calendar data). It was both frustrating and strange—even stranger that Apple techs had no clue why and seemed to think no one else was having this issue.
    I tried everything - complete restores, resets, deleting and re-adding the mobileme account, etc., etc., etc. One tech support person finally said, "good luck..." The others kept handing me off the higher levels of support... until finally they just said "we don't know why this is happening." I was waiting for someone to just say, "Look, we have issues with mobile me, so hang in there and eventually it will work." I can be patient and I still think the iphone is the greatest invention in recent years. But everybody I talked with at Apple seemed to think this should be working flawlessly.
    I also started having a crash on the calendar anytime I tried to see the list view for "all calendars." This was frustrating because that's the best feature of the calendar app!
    I was prepared to just return to syncing with my computer and wait for the software to improve between the phone and mobile me. Finally, last night I tried a few things that seem to be working... and for the first full day, mobile me is actually useful to me today. (my fingers are crossed!)
    Here's what I did.
    1. I minimized the number of calendars I was syncing - I have no idea if this affected the sync, but I was syncing eight calendars, now I'm down to four. (You can easily export a calendar and import those events back into a different calendar.)
    2. I did a complete restore of the phone (not from a back up) and the VERY FIRST THING, I added mobile me and synced only the calendar (set to push.) This cleared up the random calendar crash in list view and also mobile me was pushing data rather reliably. After a few moments my entire calendar was on the phone and worked perfectly. New events were transferred quickly back and forth.
    3. I then chose to sync my contacts through the computer rather than over the air. I fear that the contact sync was somehow messing up the whole communication process between the phone and the cloud. Someone suggested that the number of "groups" in contacts might have an impact on the sync issues as well. I didn't need my contacts to sync with the urgency of "push" so this works for me. Plus I have a lot of contacts and it's just faster over the cable.
    4. I then GREATLY reduced the number of apps on my phone. I originally had about 27 and I only reinstalled 9 of them. I did this ONE AT A TIME - starting with the most necessary and useful... and after each install, I checked the functionality of the calendar and mobile me. No problems. Perhaps I was having an app conflict?
    5. Then I reinstalled the rest of my content - music, podcasts, photos. Still no problems.
    ONE of these steps actually worked, and I'm not sure which one. My guess is that one or more of my apps was conflicting in some way. OR possibly something with the contact sync... but for the last 24 hours the mobile me calendar sync using push has been consistently reliable and useful. (for the record, mobile me email has always worked perfectly for me.)
    No one with tech support ever suggested to me that I could be having an application conflict or any other problems with calendars or contact groups, etc. I've spent many hours on this the past few weeks... and for the first time, my iphone seems to be working with mobile me correctly.
    In reading many of these posts, it seems a lot of others are having similar problems... so hopefully these suggestions might be helpful. If you have any thoughts as to which of these solutions was the correct one, I would be interested in hearing your opinion.
    Thanks!

    Are your Address Book contacts and iCal calendars/calendar events on your Mac synced with your MobileMe online address book and calendar?
    When you say this data is not synced with your iPhone, none of your MobileMe online data is transferred to your iPhone, or after the initial transfer of this data to your iPhone when you first turned contacts and calendars for over the air syncing with your MobileMe account on your iPhone, the data is not kept synchronized with the MobileMe "cloud"?

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • Having sync issues with Outlook 2011 since upgrading to Mavericks

    Hi All,
    My work Macbook Pro 13" is having issues syncing my inbox and sent mail automatically. It's a hit or miss if I recieve emails in my inbox in a timely mannor with out pressing the Send/Recive button (even when i press it takes minutes to update). My Sent Items can show up an hour later  even if I hit the Send/Recieve button.
    All my mail is there and shows up/syncs on my iPhone quickly. I upgraded to Mavericks right when it came out and have only been having these sync issues for the last week or so.
    I've cleared my mail cache and that didn't work. My calandar reminders and contacts don't seem to have any issues and no other apps have been preforming slow or strangely.... just my VERY important work email. My tech guys are stumped and I wanted to try you guys before they do a major rehaul of my system 
    Thanks!

    A new Outlook Identity will most likely solve your issues. If you have any data under "On My Computer" folders, see this link:
    How to move your data to a new Identity
    BTW, how much free space on your drive? Use Disk Utility in Applications/Utilities to find this info. You need a minimum of 10% free but 15-20% is recommended.
    Outlook gets very sluggish when you are low on disk space. If you have a bunch of older Identities from previous rebuilds you can delete these to help free up space.

  • ICal refuses to finish 'restore' ; trying to resolve sync issues.

    trying to fix sync issues.
    using missing sync.
    everything worked perfectly for a ling long time before i thought it'd be cute to go in and put birthdays into addressbook, and select the option in iCal preferences to add those events to my calendar.
    EVERYTHING has gone to **** since then.
    the missing sync guys recommend i backup and restore addressbook and iCal.
    addressbook did fine.
    when i select the saved ICal database file (icbu) from my desktop, it will not complete.
    what gives?
    i'm trying to do this to fix another problem.
    its like every step is making a new issue.
    i am getting close to the edge guys...
    pleaes help.
    thanks!
    c
    (overall problem is that i cannot even get missing sync to overwrite my blackberry 8830 now.
    for months, iCal, Addressbook, and Tasks synced perfectly.
    all was well until i screwed with this stupid Birthday feature.)
    Message was edited by: clyde c

    also, i've already gone into iSync and cleared sync history....that didnt seem to affect anything.
    thanks in advance for any insights at all.
    c

  • IPhone and Windows 7 64 Bit - syncing issues

    Hi,
    Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is:
    'The iPhone "Michael's iPhone" can not be syned. The required file can not be found.
    I have restored the iPhone and after it resets, it sits at the Setup Window in iTunes for ages, then clicks over, starts syncing (it is doind that now) but also displays the error. Will be interesting to see if it actually finishes the sync and to see if the apps work on the phone.
    I have also removed iTunes, Quicktime, Mobile App Supprt, Apple Software Updater, Bonjour and reinstalled and still the sync issues coninue. I also ran the diagnostic tool in iTunes on syncing and detecting the iPhone and it reports everything is ok.
    Microsoft Windows 7 x64 Business Edition (Build 7600)
    Gigabyte Technology Co., Ltd. P55-UD6
    iTunes 9.0.1.8
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number E400D*7E1<Edited by Host>
    Current user is an administrator.
    The current local date and time is 2009-10-23 19:56:37.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 5800 Series
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: cecad029456cdd284aef514988f34808
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.1.8 is currently running.
    iTunesHelper 9.0.1.8 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
    Connected Device Information:
    iPhone, iPhone 3GS running firmware version 3.1.2
    Serial Number: 88924**3NS <Edited by Host>
    Most Recent Device Not Currently Connected:
    iPod nano (5th Generation) running firmware version 1.0.1
    Serial Number: YM937**72D <Edited by Host>
    ** iPhone/iPod Touch Sync Tests **
    Sync tests completed successfully.
    I have applied all software updates and the latest chipset drivers for the motherboard. My Nano syncs without a problem. It just seems to be my iPhone.
    I have iTunes installed in the defualt directory on C:\ with the mobile apps etc. Music is located on my E:\
    I am not sure what to do now....

    Well, the new gigabyte bios fixed the issue.

  • Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Hello surig84,
    Thank you for providing the details of the issue you are experiencing when syncing your iPad.  I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Like many others, I got the new iPad 3 and couldn't sync all of my photos.  The best i got was 1,000 out of 15,000 to work.  Today Apple released iTunes 10.6.1.7 and said the syncing issue was resolved.  I erased my ipod cache and hit sync.  Still locked.

    Like many others, I got my new IPad 3 and could not sync all of my photos.  The highest I got was 1,000 out of 15,000.  Today Apple released iTunes 10.6.1.7 that , among other things, said it fixed the sync issue with photos.  I excitedly, erased my ipod cache and hit sync.  It looked like it was working, but just like before iTunes locked.  This time at 2,244 of 15,000.  Anybody have an idea of how to fix this?

    What's the capacity of your iPad?
    iTunes needs up to 3x of the actual size of the files you want to sync during the sync process. And syncing 15.000 photos could cross the size of the available free space on your device.
    Don't forget that the pictures are now optimized for the retina display, so the size increases for each of them.
    Message was edited by: Ingo2711

  • Quick Fix to iTouch Syncing issues

    I too have seen the problems mentioned in the forums about the ipod touch syncing issues with the january software upgrade option... And i have seen the quick fix that allows you to get it to sync. I will post it here so that eveybody doesn't have to scroll down to the bottom of a topic or search through topics. Please don't reply to keep this a clean topic so others can easily access the information.
    *Disconnect iPod Touch from computer.*
    *Disconnect computer from internet.*
    *Reconnect iPod Touch to computer.*
    *Start syncing editing ... whatever*
    *Reconnect to internet*
    This should hopefully allow you to start syncing again, it is not the ideal solution and I do hope the apple engineers can find a permanent solution. And thanks to the guys who posted the original instructions, I do not in any way take credit for the instructions, only making them more accessible.

    I REALLY appreciate your help.  Your fix worked and relieved a lot of frustration.  I have HP everything (Printer, lap-top, desk tops)  and was upset there wasn't an obvious "contact" option in the support web-site.  I knew if I was allowed to describe the problem, a bright person like you would respond.

Maybe you are looking for

  • Sharing iphoto library with another person?

    Hi I have a photo library on my iPad first generation. Can I transfer this entire library to another person's MacBook for them to have? Would I do this via iTunes or iPhoto 11? I don't want to wipe out their library. AS

  • Wifi profile being disabled

    Hardware: Z10 STL100-3 OS 10.0.10.85 Have noticed that when my Z10 is unable to connect to Wifi the profile is automatically disabled, and I have to manually re-enable it. This happens both at work and at home where the failure to connect is temporar

  • Catalyst 3750 Ingress SPQ/SRR behavior

    Do Cisco engineers review this community at all? I am working on the latest version of QoS standard for our Enterprise and noticed the following conflicting information officially provided by Cisco. My question relates to ingress/pre-ring Strict Prio

  • Aperture 2.1.1 with OS X 10.5.5 freezes the Application

    I upgraded yesterday to OS X 10.5.5. Now Aperture (v2.1.1) on my G5 Quad gets to the "loading..." stage with images and freezes. It never loads the hi-res images and I'm left looking at a pixelated image. A force quit is the only thing that'll shift

  • Bluetooth File Exchange seems to not work in Lion

    I use Bluetooth File Exchange to transfer videos and pictures from my cell phone to Mac. Since upgrading to Lion, Bluetooth File Exchange doesn't seem to work properly. In Snow Leopard when you browse a phone, there is a row of icons at the top of th